Frozen bluewhiting breaded fillets, 40g/60g/90g/100g/ unit, subject to customer's request
Dried bluewhiting sliced
Moisture:23-25%, salt:8-10%
Packing:10kg/ctn in bulk or 18g , 20g, 36, 43g, 100g , 1kg retail package .
We can do as customer's request.
All the specifications we can produce as customer's request
We sell our dried seafood to all over th e word.
Taste for russia , japan, europe, south asia and so on.
1.Dried bluewhiting sliced
Moisture:23-25%, salt:8-10%
Packing:10kg/ctn in bulk or 18g , 20g, 36, 43g, 100g , 1kg retail package .
2.Frozen bluewhiting breaded fillets, 40g/60g/90g/100g/ unit
Changlin ship launching air bag ¡ª how to select air bags?
Air bag diameter
The air bag diameter is mainly decided by the ship blocks' height. Ship lifting from blocks is the most important stage in the air bag launching process. At this stage, the ship whole weight is to be lifted by air bags, and the air bag working height must be larger than the block height. The air bag diameter should be selected according to the block height. The air bag diameter must be increased by 0.5m-0.7m, which is based on the block height, otherwise the air bag bearing capacity may be not enough.
At present air bags with diameter less than 1.2m can only be applied on small ships. Air bags with diameter 1.5m or 1.8m are used to launch over 10, 000dwt ships. For block height larger than 0.9m, diameter 1.5m air bags are mostly chosen for the launching. For block height larger than 1m, diameter 1.8m air bags are preferred.
Air bag length
For small ships, the air bag length should be slightly larger than the ship molded breadth. Air bag length can be decided by the formula: b
When moving a tug, a fishing boat and the like ship with small block coefficient, air bag ends must extend out of the ship sides, to get good stability of the ship moving. The extended length at each side should be slightly larger than air bag diameter.
For medium ships, the extended length at each end shall not be very long. For example, a normal ship like cargo ship with block coefficient cb > 0.75, airbag should be equal to the breadth of flat bottom at mid-ship (the breadth excludes arc part at bilge).
For large ships, if existing airbag length is shorter than the flat bottom breadth, the longest air bags should be ordered. The airbags layout can be interlaced mode or twin-row mode. We would like to provide advice and suggestion according to customer's specific situation.
According to customers requirement
1611 Marine Equipment Machinery Suppliers
Short on time? Let Marine Equipment Machinery sellers contact you.
1. Inner: rubber tube.
2. Middium layer: multi-layer of rubber-dipped tyre fabric.
3. Material: natual rubber, anti-aging. Multi layer of rubber-dipped tyre fabric.
4. Outer: tyre-chain net.
5. Tyre: air tyre, car tyre.
6. Chain: hot galvanized.
7. Flange: hot galvanized or stainless steel.
8. Shackle: hot galvanized.
9. Valve: copper.
10. Working pressure: 0.05mpa, 0.5bar.
11. Testing pressure: 0.15mpa, 1.5bar.
Emergency escape breathing devices
1. The eebd are only used for escape from a compartment that has a hazardous atmosphere to provide personnel breathing protection. Not to be used for fighting fire, entering oxygen deficient voids or tanks, or worn by fire fighters
2. There is a pressure gauge on the cylinder to indicate the cylinder pressure. The cylinder pressure of eebd is not indicated by a pressure gauge during storaging.
3. The hood is a flame resistant head cover which completely covers the head, neck, and may cover portions of the shoulders, there is a clear window on it. 4. Easy to use, open the cylinder valve and put the hood on head when use
Specifications
Immersion suit type ii
1. Solas/med approval
2. Warm protection for 6 hours
3. Neoprene fabric
4. No additional lifejacket required
5. Size: m, l & xl
6. User height: 165-200cm
7. A reinforced bag isprovided for each suit for the purpose of storage
8. Watertight test is applied for each suit to ensure water tightness.
9, thickness: 5mm
Ywc series 15ppm bilge separator
1. Introduction
Ywc series 15ppm bilge separator (15ppm bilge separator) is a kind of environmental protection product designed based on international maritime organization imo mepc 107(49) standard, the oil content in effluent water 15ppm.
Ywc series 15ppm bilge separator (15ppm bilge separator) of 9 types with the capacity from 0.25m3/h to 5.00 m3/h, the smallest type is ywc-0.25 which can be installed on ship less than 1000dwt. The biggest type is ywc-5.00 which can be installed on ship more than 300 thousand dwt. This separator can also be used in industrial and petroleum, besides in ship vessels
2. Main parameters
(1)capacity: from 0.25m3/h to 5m3/h
(2) oil content in the effluent water 15 ppm
(3) meet the standard of imo mepc. 107(49)
(4) heating mode: steam /electric heating
(5) ccs, ec certificate
(6) applicable ship: less than 1000 dwt to above 300 kdwt
(7) there are 9 types with different capacities
3. Types
0.25 m3/h, 0.5m3/h, 1m3/h, 1.5m3/h, 2m3/h, 2.5m3/h, 3m3/h, 4m3/h, 5m3/h
