4 FT Log Debarker machine (Heavy Model); Log Rounder Technical Parameters: Model: RBD1400 Max dia of log: 500MM Max length of log: 1400MM Linear speed : 45M/min Total Power: 19 KW Weight: 3200kgs Dimension: 3600*2100*1600MM CAN EQUIPT WITH CHIPPER TO PROCESS THE PEELED BARK TO SMALL PIECES Usage: Log rounding debarker is used for peeling off the log skin and make the raw log to be round,after debarking it will be easy for the peeling lathes to peel and the veneer thickness will be even without big variation,also can increase the peeling lathes working life.One set debarker can work with two sets of peeling lathes, it can save labor. Service: 1. We supply full core/face veneer production line according to customer's demand, fully/semi-automatic avaliable. 2. One year guarantee of machines, and lifetime after-sales service and information consult. 3. Our technical people have much experience in installation, debugging, run testing all kinds of machine in different countries. 4. Our company attends most of the international exhibitions every year, and will visit the local customers to collect customer's feedback and suggestions on our machines, then we can update our machines continuously.
1.Technical Parameters: Model RBD1400 Max dia of log 500MM Max length of log 1400MM Linear speed 45M/min Total Power 19 KW Weight 3200kgs Dimension 3600*2100*1600MM 2.Features: 1.Log rounding debarker is used for peeling off the log skin and make the raw log to be round, after debarking it will be easy for the peeling lathes to peel and the veneer thickness will be even without big variation. 2. It also can increase the peeling lathes working life. 3.One set debarker can work with two sets of peeling lathes, it can save labor.
Technical Parameters: Model RBD1400 Max dia of log 600MM Max length of log 1400MM Linear speed 60M/min Total Power 36.5 KW Weight 4000kgs Dimension 4400*2000*1500MM 2.Features: 1.Log rounding debarker is used for peeling off the log skin and make the raw log to be round, after debarking it will be easy for the peeling lathes to peel and the veneer thickness will be even without big variation. 2. It also can increase the peeling lathes working life. 3.One set debarker can work with two sets of peeling lathes, it can save labor.
Teak wood logs.
plywood: high grade furniture board: 3mm 37mm thickness of more than 100 varieties. bottom: bleached poplar, poplar, technology wood, pine, oguman, birch..
Plywood, OSB, MDF, LVL, wood..
Plywood 4ft heavy duty log debarker 1.Enlarged double roller and single roller. 2.Enlarged motors more powerful. 3.Work well for both hard wood and soft wood.
wood veneer glue spreading machine wood panel gluing machine
Yuequn Edge cutting saw 1.Total thickness within 60mm. 2.Size adjustable :L 1830mm to 2440mm;width 915mm to 1220mm. 3.Big capacity: 500-600pcs/h with18mm plywood. 4.High cutting precision with Infrared guidance control. 5.Smoothly edge cutting with scoring saw blade. 6.Free dust collector ,environmental friendly. 7.Automatic stacking with solid pneumatic system. 8.Strong power :main cutting motor with 4sets *7.5kw motor. 9.Diagonal cutting tolerance within 1mm, normally 0.5mm. If have special size,tell us freely. Also can add vacuum feeding system as your require.
Yuequn Veneer Peeler 1.4ft peeler max diameter 500mm/ max length 1400mm 2.8ft peeler max diameter 500mm/ max length 2600mm 3.Factory price 4.Big production capacity 5.Heavy duty frame 6.Big power motor which size you need,4ft or 8ft ?
Advantages and Features: 1. PLC computer control, one worker operation, automatic process, labor cost saving, no overlop or open joint, no break. 2. High precision detecting, cutting size in minimum. 3. Servo control makes it precise location and effectively control the overlap seam. 4. Use dedicated high-strength heat melts glue thread to stop the veneer breaking. 5. We use international famous brand parts such as Germany Festo, Taiwan Delta, Germany 0Siemens, Japan Mitsubishi, Taiwan TECO, Germany NSK,etc. 6. Save 70% worker cost of veneer repairing. 7. Save 80% worker cost of veneer forming. 8. Save 50% worker cost of puttying.
Product name Woodchip block Material Poplar Glue: E0,E1,E2 Size 9X9X9mm,12X12X9mm or as per request Density 500-700kg/m3 Moisture 8%~12% Packing Standard package with pallet and steel tape Loading Quantity 20GP 8pallets/22M3 40HQ 18pallets/55M3 Usage Packing and crates Payment TT ,DP or L/C at sight Certificate CARB
Max. working length 1400mm Working diameter range 22~500mm Max. working speed 90-120m/min Veneer thickness 0.5~7mm Double rollers motor power 7.5kw x 2sets Single roller motor power 7.5kw x 2sets Screw Feeding motor power 11kw Rotary clipper motor power 2.2kw Rubber belt conveyor motor 2.2kw Machine size 4700x1900x1500mm Machine weight 7000kgs Total power 45.4kw Remark Including 6 meter veneer conveyor
1. Product Features: 1.Used for poplar core veneer peelig and cutting. 2.Veneer thickness is adjustable, double sides smooth. 3. Peeling speed is adjustable. 4.High/Normal speed avaliable, double power. 2. Technical Parameters: Max Wood dia: 500mm Max length of Log: 1400mm Dia of left wood: 26mm Veneer thickness range: 0.5-7mm Peeling Speed: 55- 100M/MIN avaliable Total Power: 41.4kw Overall dimension: 4900X2000X1550mm Total Weight: 7000kg
1.Product Description: 1.This machine is used to peel log without skin to core veneer and continue peeling log core after spindle peeling. It is very popular for plywood industry. 2. CNC Spindle less Veneer Peeling Lathe, with hydraulic system for knife installation which makes easy to change knife when need to grind and save time. 3. Servo motor, Precision hardened gear reducer. 4. Japanese Mitsubishi CNC system . 5. We have 4f, 6f and 8f to meet different requirement. You can choose it according to your demand.
Plywood Hot Press machine is one of the main equipments in producing plywood,blockboard, film faced plywood, fancy plywood. 1.The main frame is welded by No.1 national standard steel plate,strong body, high rigidity. 2. Adopt micro computer control system and imported hydraulic units, easy to operate,long working life. 3. Adopt advanced hydraulic pump station and plunger cylinders, featured product--aviation technology low noisy hydarulic pump. 4. All the hot platens are made of the best quality steel plate, after solid drilled and fine polished, good thermal conductivity. 5. It has manual and automatic transfer function to meet user's demand. Technial Parameters 1. Various pressure: 400T/500T/600T/800T/1000Ton and more. 2. Plywood sizes: 1220x2440mm, 915x1830mm etc. Usage: Used for hotpress in plywood making reasonable design, maintenance is very easy customerized design is avaliable Service 1. We supply full core/face veneer production line according to customer's demand, fully/semi-automatic avaliable. 2. One year guarantee of machines, and lifetime after-sales service and information consult. 3. Our technical people have much experience in installation, debugging, run testing all kinds of machine in different countries. 4. Our company attends most of the international exhibitions every year, and will visit the local customers to collect customer's feedback and suggestions on our machines, then we can update our machines continuously.
This series of roller dryer is one of the main machines in plywood production line. It is very suitable for wet clipping processing and drying thick veneer. Advantage: New technology and advanced PLC controlling system have been used for effective and quality drying veneers with lower energy consumption. The BG1333 roller dryer machine is 13 sections as a standard, 2 meters as a standard for one heating section, one cooling section, one conveying system, one input roller table, and one output roller table. Customers can use the machine from 8 sections to 18 sections that it is up to your needs. MAIN FEATURES: 1. The machine is usually designed and customized according to user 's requirement (such as veneer size,drying capacity, workshop space ). 2. Mainly used to remove extra moisture from the veneer. 3. The heat medium can be thermal oil or hot steam. 4. Roller gear drive system help keep the dryed veneer smooth and flat. 5. Speed adjustable according to different veneer MC and veneer thickness. PACKING&SHIPPING: 1. Machine body packed in plastic film 2. Spare parts and electrical parts packed in plywood boxes. 3. Fixed in container with steel wires. OUR SERVICES: 1. Design and produce based upon your production need. Provide full sets of drawings and manuals. 2. One year warranty for the machine. Liftetime after-sales service and maintenance. 3. Professional team for oversea machine installation&debugging. 4. Help train and guide machine operating.
Sanding machine can be used to polish various board by giving thickness and it suits to polish solid board, veneer board, shaving board, MDF board, etc. This machine index is advanced and it is in high precision, reasonable composition, modern construction and convenient opeartion. It has the world advanced level. Two rollers and one pad type: The 1st unit is an adjustable steel roller, the 2nd unit is combined. It is suitable for polishing various board by giving thickness and fine sanding. Main Features 1. The micro-computer front control panel can be operated conveniently and quickly. 2. The feed speed is controlled by the frequency converter, which can be operated flexibly and conveniently. 3. The frame has high strength, large weight and nice stability. 4. The maintenance is convenient, safety performance is excellent, and the failure rate is low. 5. The sanding unit adopts the cast structure with slight deformation and excellent damping performance. Machinery parts list: 1. One set of SR13A Sander. 2. One set of vacuum table perforated conveyor belt. 3. One set of fan blower.
1.Product Description: Spindle-less veneer peeling machine is one of the equipment for the production of plywood, which belongs to the mechanical spindleless rotary cutting transmission machine, suitable for lathe cutting remaining wood core to continue into veneer, also can be applied to small diameter wood (diameter 300mm) into veneer.These advantages like those: 1,Processing of the board thickness uniform, surface smooth; 2,reasonable structure, easy operation and maintenance; 3,equipment performance is stable, less wearing parts, long life; 4,saving timber resources. 5,Artificial technical requirements are not high,in the normal peeling the machine,the error in ± 0.1mm Spindleless Veneer Peeling Machine Features option: CNC Control , servo motor Siemens system. Better structure and stable performance, suitable for both hard and soft wood. Make the core veneer is smooth and uniformity.
Main features: 1.The main structure is welded by national standard steel, high stability and no deformation. 2.The operating system is accurately controlled by PLC to achieve the high precision sawing size and automatic stacking, reduce the labor's intensity. 3.The main electric units adopt famous brand Omron, Schneider, safety and reliable. 4.The machine adopts high precision wear-resistance guide rails and infrared positioning, diagonal error of plywood can be less than 0.5mm. 5.The machine adopts pre-load device, just need two workers, one work shift can produce 3000-4000Pcs 16mm plywood. 6.It has the automatic saw waste remover device. Product Application: This product is suitable for plywood board, cutting edge technology is manual cutting to a great leap forward of automatic cutting,compared with ordinary hand saws, the machine has five features: precision, high efficiency, energy saving, provincial industry and environmental protection. The machine adopts PLC intelligent design, saw blade speed can be adjusted automatically according to cutting condition,no need to stop any saw blades,at the same time realize the automation of stacking and leftover material removal, safe and convenient operation, smooth running, low noise. Its high quality automatic saw cut, board face is smooth, no dozen edge, coastal zone size standards. Highlight the native: intelligent cutting, smooth running safe, accurate and efficient. Service 1. We supply whole production line according to customer's demand, fully/semi-automatic avaliable. 2. One year guarantee of machines, and lifetime after-sales service and information consult. 3. Our technical people have much experience in installation, debugging, run testing all kinds of machine in different countries. 4. Our company attends most of the international exhibitions every year, and will visit the local customers to collect customer's feedback and suggestions on our machines, then we can upgrade our machines continuously.
