The Magnesium board is made of filling materials ,such as sawdust and all kinds of crushed plant straw (you can select any one kind )and several chemical raw material which are token as modified material after special technology .the board has such features:quickly hardening ,high strength ,large-format ,fireproof ,damp-proof and good waterproof performance.It can be nailed ,planed and stuck,so it can be used widely at indoor decoration ,such as wall skirting and ceiling of market,hotel,club ,station ,office building and living room.
Machine name: automatic aluminum door window double head cutting saw
Machine Features:
The machine is used for cutting aluminum alloy profiles in angel -45,~90,~45.
The linear feeding way and gas-liquid damping cylinder assures blade cutting is even and stable.
The two saw heads adopts linear guide rail pair.
One machine is with two applications in cutting profiles and end corner profiles. (to be customized).
The machines structure is of excellent rigidity and reliability, wide cutting range,high precision, easy operation, .
The circuit system has the motor phase sequence and missing protection, increase the systems security.
Technical Parameters:
Power 3.2 kw.
Voltage 380V, 50 Hz
Cutting Angle -45, ~90,~45
Machine Size 4500 x 1200 x 1400mm
Weight 1200kg
Vertical ring die pellet mill the hot sales model of wood pellet machine, pelletize the grined materials into wood pellet , the most suitable moisture is 15%, moisture 12%-20%
The special advantages of this machine is as below:
1.Vertical feeding, directly in pelletizing room, die is static, rollers rotate; material are evenly distributed around pelletizing room because of centrifugal force, no block.
2.Double-layer die. Two layers both can be used for reduce the cost. High efficiency and save energy. Pelletizing room is also used for cooling, more options, and more gains.
3. Independent and frequent conversion discharge device can ensure the formation rate of pellet.
4.Ring die and vertical structure are good for cooling the pelletizing room.
5. Capacity: 1-1.5t/h , with high capacity and low consumption , have a high profit
Vertical ring die pellet mill the hot sales model of wood pellet machine, pelletize the grined materials into wood pellet , the most suitable moisture is 15%, moisture 12%-20%
The special advantages of this machine is as below:
1.Vertical feeding, directly in pelletizing room, die is static, rollers rotate; material are evenly distributed around pelletizing room because of centrifugal force, no block.
2.Double-layer die. Two layers both can be used for reduce the cost. High efficiency and save energy. Pelletizing room is also used for cooling, more options, and more gains.
3. Independent and frequent conversion discharge device can ensure the formation rate of pellet.
4.Ring die and vertical structure are good for cooling the pelletizing room.
5. Capacity: 1-1.5t/h , with high capacity and low consumption , have a high profit
Dust Collector Dust Extractor for Woodworking Machine
There are two types of dust collector, two bags and four bags. Generally speaking, 2.2 kw dust collector has two bags; while 3.0kw dust collector has four bags.
A complete dust collecting system is consisted by following parts
1) Dust collector for woodworking cnc router
2) Dust collection hood
3) Dust pipe
4) Pipe bracket
109 Wood Working Machinery Tools Suppliers
Short on time? Let Wood Working Machinery Tools sellers contact you.
Features of 2 ton per hour wood pellet mill for sale :
Chang sheng wood pellet mill produces pellets with very high capacity, low energy consumption and high pellets quality. With speical die and roller structure, production cost can be reduced to a minimum.
Chang sheng wood pellet mill spare parts rollers are designed for easy adjusting the clearance between the rollers and die.
Chang sheng wood pellet mill time to time clearance will help rollers work more efficiency and achieve the maximum capacity.
Afeter pelletizing, moisture content of wooden pellets is below 14%, then the cooler are used to reduce temperature of pellets and carries 2-3% moisture away to make pellets easy store.
Characters of Wood Shaving Pellet Machine Supplier :
Chang sheng wood pellet machine are desinged for producing a variety of pellets, such as wood, grass, sawdust, wood shavings etc.
Chang sheng wood pellet machine is equipped with fequency control screw feeder to increase productivity and efficiency of big size pellets.
The automatic pneumatic valve is designed to protect the main motor in advance.
Smart design for operator to easily load and unload the pellet dies.
The dies and rollers are made of solid chromium steel for high wear-resistant which can provide longer operation life.Specification
700 kg per hour complete wood pellet line with best price
Except 700 kg per hour wood pellet line, we can also offer 800 kg per hour wood pellet line, 900kg per hour wood pellet line, 1000 kg per hour wood pellet line, 1500kg per hour wood pellet line, complete 2000 kg per hour wood pellet production line.
Layout for complete wood pellet production line with different capacity for your choose:
complete_wood_pellet_line_700kg_per_hour.jpg
If your raw materials are wood logs, then the wood pellet making line should start from wood chipper machine which is used to crush wood logs into wood chips. If wood chips moisture is higher than 20%, then a rotary drum dryer machine should be used.
For a rotary drum dryer machine, we normally suggest customer suitable model depend on its initial moisture, end moisture and hourly capacity in the complete wood pellet line you want.
As we know, wood chips can not be put into pellet machine directly, it should be crushed into wood sawdust first befor coming into the dryer machine. For hammer mill, we have single shaft hammer mill and dual shaft hammer mill for your choose.
In this 700 kg per hour wood pellet line, a small vertical ring die wood pellet machine with 45 kw power and 700kg per hour model will be suggested to suit this complete pellet line. Here, i want to introduce it detaily. Small vertical ring die wood pellet machine is very hot selling in china because of its high capacity with less power consumption. This vertical ring die pellet mill is installed with automatic lubrication system to lubricate inner spare parts of this pellet machine to make sure pellet machine all spare parts have a long life span.
This small 700 kg per hour wood pellet machine feed raw materials vertically, raw materials centrifugal. No stuck, no jamping.Pellet machine internal with two roller and one die. Rollers move, die stable , pellets can be formed in a very easy way.
vertical ring die rice husk pellet mill (3).jpg
Pellet cooler, we will suggest a suitable pellet cooler with 700 kg per hour to meet this pellet line.
Pellet packing machine is used to pack pellets in ton bag or into 15 -50 kg plastic bags. We have thread closed and hot air sealed packing machine for your choose.
1.Wood pellet production line also know as wood pellet line or wood pellet plant , allowing to make any forest waste such as wood logs, sawdust, wood shavings etc into pellets.
2.This complete wood pellet production line consist of wood chipping sector, drying sector, pelletizing sector, cooling and packing machinery etc.
3.Below is the layout for complete wood pellet production line made as per customer's requirement:
4.Capacity: 5 ton per hour complete wood pellet production line
5-6th wood pellet line
Wood pellet fuel good points:
1. Enviroment benefit.
2. Can be stored for a long time and can be transported easily.
3 .Wide applcation , can be sold in many places.
4. High efficiency. Wood pellets has high heat value.
5. Raw materials are abandant locally, sustainable and renewable.
3 ton per hour wood pellet production line details for your reference:
About raw materials: Raw materials are easy to be found locally, it can be any wood logs, wood waste and biomass waste, such as sawdust powder from sawmill, wood shavings, wood chips, rice husk, groundnut shell, palm etc.
Mainly sectors: If your raw materials are wood logs, then a wood chipper should be used. A rotary drum dryer is necessary if raw materials contains too much humidity, pelletizing process, cooling, screening and packing etc. For this whole 3 ton per hour wood pellet production line, one manpower is enough to operate it.
We have complete wood pellet production line range from 700 kg per hour to 13 ton per hour capacity for you choose.
wood_pellet_produciton_line (2)
We can make pellet production line ranging from 700kg perhour to 15 ton per hour. Our business scope are: rotary drum dryer, wood chips hammer mill, pellet machine, pellet cooler, packing machine etc.
Complete 2 ton per hour Wood Pellet Production Line
We can make pellet production line ranging from 700kg perhour to 15 ton per hour. Our business scope are: rotary drum dryer, wood chips hammer mill, pellet machine, pellet cooler, packing machine etc.
Except 700 kg per hour wood pellet line, we can also offer 800 kg per hour wood pellet line, 900kg per hour wood pellet line, 1000 kg per hour wood pellet line, 1500kg per hour wood pellet line, complete 2000 kg per hour wood pellet production line.
Layout for complete wood pellet production line with different capacity for your choose:
complete_wood_pellet_line_700kg_per_hour.jpg
If your raw materials are wood logs, then the wood pellet making line should start from wood chipper machine which is used to crush wood logs into wood chips. If wood chips moisture is higher than 20%, then a rotary drum dryer machine should be used.
For a rotary drum dryer machine, we normally suggest customer suitable model depend on its initial moisture, end moisture and hourly capacity in the complete wood pellet line you want.
As we know, wood chips can not be put into pellet machine directly, it should be crushed into wood sawdust first befor coming into the dryer machine. For hammer mill, we have single shaft hammer mill and dual shaft hammer mill for your choose.
In this 700 kg per hour wood pellet line, a small vertical ring die wood pellet machine with 45 kw power and 700kg per hour model will be suggested to suit this complete pellet line. Here, i want to introduce it detaily. Small vertical ring die wood pellet machine is very hot selling in china because of its high capacity with less power consumption. This vertical ring die pellet mill is installed with automatic lubrication system to lubricate inner spare parts of this pellet machine to make sure pellet machine all spare parts have a long life span.
This small 700 kg per hour wood pellet machine feed raw materials vertically, raw materials centrifugal. No stuck, no jamping.Pellet machine internal with two roller and one die. Rollers move, die stable , pellets can be formed in a very easy way.
vertical ring die rice husk pellet mill (3).jpg
Pellet cooler, we will suggest a suitable pellet cooler with 700 kg per hour to meet this pellet line.
Pellet packing machine is used to pack pellets in ton bag or into 15 -50 kg plastic bags. We have thread closed and hot air sealed packing machine for your choose.
Product Description
Entry-level three axis made from fully stress-relived structured steel for cutting and carving flat board. The Routers features - Precision ball scree drives - Rack and pinion transmission - Multi-zone vacuum plenum - World renown HIWIN bearings - Windows® based easy-to-learn and use G-Code Interface (multiple languages).
Product Specification/Models
WW1325B
1 X, Y, Z Working Area 1300x2500x200mm
2 Table Size 1360×2540mm
3 X, Y, Z Traveling Positioning Accuracy ±0.03/300mm
4 X, Y, Z Repositioning Accuracy ±0.03mm
5 Table Surface T-slot (Option: Vacuum and T-slot Combined )
6 Frame Welded Structure
7 X, Y Structure Rack and Pinion Drive, Hiwin Rail Linear Bearings
8 Z Structure Hiwin Rail Linear Bearings and Ball Screw
9 Max. Power Consumption (Without Spindle) 4.5Kw
10 Max. Rapid Travel Rate 33000mm/min
11 Max. Working Speed 25000mm/min
12 Spindle Power 3.0/4.5/6/7KW
13 Spindle Speed 0-18000RPM
14 Drive Motors Stepper System
15 Working Voltage AC380V/50/60Hz, 3PH (Option: 220V))
16 Command Language G Code
17 Operating System DSP System (Options: Ncstudio/Mach3 PC Software)
18 Computer Interface USB
19 Flash Memory 128M(U Disk)
20 Collet ER25
21 X, Y Resolution < 0.01mm
22 Software Compatibility Type3/UcancameV9 Software (Option: Artcam software)
23 Running Environment Temperature 0 - 45 Centigrade
24 Relative Humidity 30% - 75%
25 Packing Size 3350X2200X2150mm Remove gantry
26 N.W. 1300KG
27 G.W. 1450KG
28 Optional Parts
Air Cooling Spindle or Water Cooling Spindle
Syntec Control System
Dust Collector/ Dust Hoods for three Axis
Vacuum Pump
3D Scanner
Mist-cooling System
850W Yaskawa/800W Panasonic Servo Motors
Application
3D Carving, Acrylic Fabrication, Aluminum Fabrication, Architectural Millwork, Cabinetry, Exhibits and Fixtures, Signmaking, Arts and Crafts, Furniture, Boat Building, Musical Instruments and More.
Material
Acrylic, ACM, Copper, Brass, Aluminum, PVC, MDF, Melamine plastic, Foam, Melamine, Phenoic, Plywood, HDPE, Solid Surface, Solid Wood, etc.
Other Information
Guarantee & After Sales Service
1. The CNC Router Machine is guaranteed for 12 months.
2. Technical support by phone, e-mail or MSN around the clock.
3. Friendly English version manual and operation video CD disk.
Product Description
Entry-level three axis made from fully stress-relived structured steel for cutting and carving flat board. The Routers features - Precision ball scree drives - Rack and pinion transmission - Multi-zone vacuum plenum - World renown HIWIN bearings - Windows® based easy-to-learn and use G-Code Interface (multiple languages).
Product Specification/Models
1 X, Y, Z Working Area 1300x2500x400mm
2 Table Size 1360×2540mm
3 X, Y, Z Traveling Positioning Accuracy ±0.03/300mm
4 X, Y, Z Repositioning Accuracy ±0.03mm
5 Table Surface T-slot (Option: Vacuum and T-slot Combined )
6 Frame Welded Structure
7 X, Y Structure Rack and Pinion Drive, Hiwin Rail Linear Bearings
8 Z Structure Hiwin Rail Linear Bearings and Ball Screw
9 Max. Power Consumption (Without Spindle) 4.5Kw
10 Max. Rapid Travel Rate 33000mm/min
11 Max. Working Speed 25000mm/min
12 Spindle Power 3.0/4.5/6/7KW
13 Spindle Speed 0-18000RPM
14 Drive Motors Stepper System
15 Working Voltage AC380V/50/60Hz, 3PH (Option: 220V))
16 Command Language G Code
17 Operating System DSP System (Options: Ncstudio/Mach3 PC Software)
18 Computer Interface USB
19 Flash Memory 128M(U Disk)
20 Collet ER25
21 X, Y Resolution < 0.01mm
22 Software Compatibility Type3/UcancameV9 Software (Option: Artcam software)
23 Running Environment Temperature 0 - 45 Centigrade
24 Relative Humidity 30% - 75%
25 Packing Size 3350X2200X2150mm Remove gantry
26 N.W. 1300KG
27 G.W. 1450KG
28 Optional Parts
Air Cooling Spindle or Water Cooling Spindle
Syntec Control System
Dust Collector/ Dust Hoods for three Axis
Vacuum Pump
3D Scanner
Mist-cooling System
850W Yaskawa/800W Panasonic Servo Motors
Application
3D Carving, Acrylic Fabrication, Aluminum Fabrication, Architectural Millwork, Cabinetry, Exhibits and Fixtures, Signmaking, Arts and Crafts, Furniture, Boat Building, Musical Instruments and More.
Material
Acrylic, ACM, Copper, Brass, Aluminum, PVC, MDF, Melamine plastic, Foam, Melamine, Phenoic, Plywood, HDPE, Solid Surface, Solid Wood, etc.
Guarantee & After Sales Service
1. The CNC Router Machine is guaranteed for 12 months.
2. Technical support by phone, e-mail or MSN around the clock.
3. Friendly English version manual and operation video CD disk.
We woke machinery co., ltd. Are a chinese professional machinery manufacturer for upvc& alu window and door products. We produce the machinery including
Cutting machiner
Corner crimping machiner
End milling machiner
Puching machiner
Copy router
Auxiliary machine
We woke machinery co., ltd. Is professional manufacturer for window and door, curtain wall, insulating glass processing machines.
The machine is used for cutting aluminum and plastic profiles in angle 45°, 90°.
The machine clamping and feeding process adopts pneumatic control, with characteristics of compact construction, rational layout, smooth running, safe and reliable, high precision.
Power: 2.2 kw.
Voltage: 380v, 50 hz
Cutting angle: 45°, 90°
Machine size: 4000 x 900 x 1450mm
Weight: 1300kg
