Diameter: 80/125/150 mm Length:1-9 m Steel wire layers: 2 or 4 layers Wearproof thickness: 5.5/8.0 mm Flange size: 148/157 mm Flange end: 1 or 2 ends Working pressure: 85-200 bar Working lifetime: 20000-40000 cbm Export standard packing, or as customers' requests.
pay much attention to wear resistance, tensile strength, bending capacity and pressure rating for self-floating hoses.The self-floating hoses are fixed with flanges at both ends and the usual length is 11.5m. Introduction of Self-floating Hose Color: Black with orange rings around the hose. Material: Rubber with thick PU foam, carbon steel flanges at both ends Ranges: Inner diameter from 150mm to 800mm Delivery: The floating hose inner diameter larger than 500mm always shipped by top open containers.
1. Features: By using the compressed air as the power source, the output liquid pressure and the pressure of the driving air source pressure is in proportionality. By adjusting the pressure of the inlet air source, the corresponding liquid pressure can be obtained. When the air pressure and the liquid pressure balanced, the pneumatic booster pump will stop charging pressure, the output pressure is stable in the pre adjustment of the pressure. It has the characteristics of explosion proof, adjustable output pressure, small volume, light weight, simple operation, reliable performance, wide application range, etc.. It is especially suitable for high-pressure and ultrahigh pressure blasting and pressure testing of valves, pipes, joints, pressure 2 Usage. Applicable range of pressure (bursting) test equipment: Automobile steering tube, brake pipe, air-conditioning pipe, oil pipe, water pipe cooling, radiator, heater hose, hydraulic equipment, condenser, evaporator, air conditioning filter hose, turbocharging system hose, car brake pump, a cylinder body, a project hydraulic hose, air hose and manifold, rigid pipe, joints, valves,cylinder, pressure gauges, pressure sensor,pressure vessel, pressure transmitter etc.
Diameter: 133/140/159 mm Degree: 15/30/45/60/90 degree Type: seamless or welded Service brands: schwing, putzmeister, sany, kyokuto, zoomlion, cifa, etc Export standard packing, or as customers' requests
Cycle punchar banane me kam aata hai
Diameter: 100/125/150 mm Wall thickness: 4.0/4.5/7.0/7.5/8.0 mm Length: 1.0/1.5/2.0/3.0/6.0 mm Weld-on ends: 148mm, 122mm, 127mm, 4", 5", 6" Export standard packing, or as customers' requests
Material: 20#, 20G, A105, A106, 304, 304L, 316, 316L, A234-WPL6, A234-WP11, A234-WP91, A234-WP22, 16Mn, 12Cr1MnV or other on request Dimension: Seamless 1/2 IN---24 IN, Welded 1/2 IN---72 IN Degree+¼45Deg., 90Deg., 180Deg. or on request Wall thickness: SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS Certification: ISO9001, API, CE certification Executive Standard: ASME, ASTM, DIN, JIS, GB, BS Use: Petroleum, nature gas, chemicals, power generation, metallurgy, heat-supply pipe network, shipbuilding, construction industries etc. Packing: Seaworthy.
We offer four different types of liners as per api standard for all popular pumps to suit any drilling conditions, including premium chromium liners, ceramic liners, chromium-plated liners and hardened liners. Premium chromium liners apply in standard environment with the longest service life of more than 1000 hours, and the ceramic liner has the longest service life of more than 4000 hours. All items are manufactured to api 7k quality standards. Parts are available for these popular pump models: Emsco: f-1300, f-1600, fb1300, fb1600, f-800, f-1000, f-500, f-350, db-550, da-700, fa-1600/1300, fc-2200, d-300/500, d-375, d-700 Ideco: t-500, t-800, t-1000, t-1300, t-1600 National: 7p50, 8p80, 9p100, 10p130, 12p160, n1300, c-250, k-700, 14-p-220, e-700/g-1000, k-500, k-380, k-500a/700a, c-250/350, jws-400 Gardner denver: pz7, pz8/9, pz10/11, fk-fxk, fy-fxd, fd-fxx, fg-gxg, fg-fxg, kg-kxg, fq-fxq, ff-fxf Oilwell: a-560/600-pt, a-850-pt/a-1100-pt, a-1700-pt/a-1400-pt And other brand pump spare parts for wirth, opi, ellis williams, gaso, wilson, skytop/brewster. 1.Premium chromium liners(bi metal liner, hy-chorme liner )combine the strength of a forged steel out shell with the abrasion and corrosion resistance of a high chromium iron inner sleeve. These liners feature a centrifugally cast high chrome iron sleeve which is machined and heat treated to a minimum uniform bore hardness of 62hrc. Each liner is machined to close tolerance to assure ease of installation and long liner life with the inside diameter of these premium liners honed to a mirror-like finish for smooth even wear during the life superior performance under tough corrosive and abrasive conditions.
1. Size: 1/2" íºC 64"(DN15 mm-3000 mm) Standards: ANSI, BS, DIN, UNI, JIS, GB, ASA, ASME, MSS etc. or as customers' drawings for special use. Materials: Carbon steel, Stainless steel and Alloy steel etc. Pressure Ratings: Class 150, 300, 600, 900, 1500 and 2500 PN 6, PN 10, PN16, PN25, PN40 and PN64 JIS 5K, 10K, 16K and 20K Type: Slip-On, Welding Neck, Blind, Socket Welding, Threaded, Lap Joint and Plate etc. Surface treatment: Transparent oil, rust-proof oil, hot galvanizing. Packing: in wooden cases, wooden pallets or as per customers special requirement. Delivery: usually within 20 days after receiving the formal order. In wooden cases.
Forged flange 1. Size: 1/2" íºc 64"(dn15 mm-3000 mm) 2. Contact email is: mtyx521 (at) 163. Com. 2. Standards: ansi, bs, din, uni, jis, gb, asa, asme, mss etc. Or as customers' drawings for special use. 3. Materials: carbon steel, stainless steel and alloy steel etc. 4. Pressure ratings: class 150, 300, 600, 900, 1500 and 2500 Pn 6, pn 10, pn16, pn25, pn40 and pn64 Jis 5k, 10k, 16k and 20k 5. Type: slip-on, welding neck, blind, socket welding, threaded, lap joint and plate etc. 6. Surface treatment: transparent oil, rust-proof oil, hot galvanizing. 7. Packing: in wooden cases, wooden pallets or as per customers special requirement. 8. Delivery: usually within 20 days after receiving the formal order.
All kinds of standard of flanges. Wood box or pallet.
ANSI/ASME B16.5 steel flanges Method: by forging, Pressure: 150Lbs - 2500Lbs, Size: 1/2"- 24", DN15-600, DN650-DN2000. Tyep: Plate/SO, WN, Blind, LJ, SW, Threaded, special mode. Material: Carbon steel: A105, SS400, ST37.2, S235JR, Q235, P250GH Stainless steel: A182, 304, 316, 316L etc Marking: Require Packing: Wooden Pallets Painting: Rust-preventative oil painting or black/yellow/varnish paint or Galvanizing Quality control: Internal/ ISO9001, KS, etc Inspection: Internal / Third party Certificate: Material certificate, Physico-chemical analysis certificate etc
Method: By forging Pressure: ND6-ND100, PN6-PN100 Size: 1/2"- 24", DN15-600, DN650-DN2000. Tyep: Plate, SO, WN, Blind, Threaded, special mode. Material: Carbon steel: ST37.2, S235JR, C22.8, Q235, P250GH, A105, SS400, SF440A Stainless steel: A182, 304, 316, 316L etc Marking: Require Packing: Wooden Pallets Painting: Rust-preventative oil painting or black/yellow/varnish paint or Galvanizing Quality control: Internal/ ISO9001, KS system etc Inspection: Internal/third party Wooden pallets
JIS steel flange Method: by forging Pressure: 5K, 10K, 16K, 20K, 30K. Size: 1/2"- 24", DN15-600, DN650-DN2000. Tyep: Plate/SO, WN, Blind, Threaded, special mode (SOPFF, SOHFF) Material: Carbon steel: SS400, SF440, ST37.2, S235JR, A105, Q235, P250GH, C22.8 Stainless steel: A182, 304, 316, 316L etc Marking: Require Packing: Wooden Pallets Painting: Rust-preventative oil paint or black/yellow/varnish paint or Galvanizing Quality control: Internal/ ISO9001, KS, etc Inspection: Internal / Third party
EN1092-1 flange Method: by forging Pressure: ND6-ND100, PN6-PN100 Size: 1/2"- 24", DN15-600, DN650-DN2000. Tyep: Plate/SO, WN, Blind, Threaded, special mode. Material: Carbon steel: ST37.2, S235JR, C22.8, Q235, P250GH, A105, SS400, SF440A Stainless steel: A182, 304, 316, 316L etc Marking: Require Packing: Wooden Pallets Painting: rust-preventative oil or black/yellow/colorless paint or Galvanizing Quality control: Internal/ ISO9001, KS, etc Inspection: Internal/third party Wooden pallet
Weed Control Mat , Material: PP, PE, Size: as per client's demand, pack in roll, Usage: weed-control, garden, color: Black.
Color: Black or customized, such as white, orange, etc. Material: virgin PE 100 Sizes Range: outer diameter from 110mm to 850mm with optional working pressures. Dredging HDPE pipes have exceptional properties such as corrosion resistance and light weight that makes them the best choice for dredging contractores. Dredging HDPE pipes are made from high wear resistant virgin PE100, mixed with anti-UV material and carbon black by extrusion molding technology.
Muyu stone slabs, wooden fish stone, stone artefacts.
Plastic PVC/CPVC/PE/PPR Pipes & Fittings.
Flanges, forging, pipe fitting.
