This modle can be desiged according to customer needs . High configuration ballscrew model can be built up to350mm, the gantry tends to tremble beyong that height , while gearwheel models can be maximam 500mm to ensure overall stability.
X.Y work area: 1200x1200mm. Z axis :350mm. Special made by order .
Performance parameter,Mt-cr1208
Spindle roating speed,0-24000rpm
Power,220v-50hz
Max feeding,25m/min
Work holding,By suction
Spindle rate,2.2kw(water cooling)
Drive moter,Stepper motor
Interface,Usb
Power(not include the spindle),3kw
Resolution ratio,0.005mm
Reposition precision,0.05mm
Operation code,G code
Dust collector,Yes
1. Main Features:
1) Good compatibility: It can be applicable to 80W laser tube.
2) Cutting Type and Sculpting Type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect.
3) Dramatically lengthen the life of laser.
4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
6) The power supply possesses open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.
9) Application: Acrylic sculpture, cut; fabric sculpture, cut; Double-color plate engraving, cut; rubber sheet sculpture, cut, etc.
1. Main Features:
1) Good compatibility: It can be applicable to 40W and 30W laser tube.
2) Fast response speed and effect.
3) Dramatically lengthen the life of laser.
4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
6) The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.
9) Application: acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut, etc.
Products Characteristics
1.Advanced stepper control system with high precision and stalbe work function,support work on/off line.
2.Integrated design adopt the framework structure,stable and reliable,low noise.
3.Imported linear rail, advanced high-speed motor and driver, carving fast and higher precision.
4.High stability laser tube,imported lens and reflected mirror,infrared positon system ensure the cutting precision is high,incision is smooth.
5.Power off memory and breakpoint continuous carving function avoid wasting materials.
6.Laser Cut 5 software the latest support graphic format form the Auto CAD,Corel Drow,Photoshop and so on.
7.Multifarious work table such as honeycomb work table,aluminous strip work table and aluminous plate work table for choose, up-down device, rotary device optional.
Technical Parameters
We can supply different kinds of this machine:SF960,SF 1290,SF1410 and so on.
1.Model: SF 960
2.Work area:900X600mm
3.Laser power: 60W(option 80íó100íó130íó150W)
4.Laser type:Co2 sealed glass laser tube
5.Engraving speed:1-50000mm/min
6.Cuttting speed:1-30000mm/min
7.Minimum shapping character:Chinese character2x2mm,letter1x1mm
8.Maximal scanning precision:3000dpi
9.Location precision:<0.01mm
10.Working temperature:5íµ-40íµ
11.Working hunidity:5%-95% free of condensed water
12.Cooling type:Water cooling
13.Curve engraving(Yes/No): Rotary attanchment(curve engraving optional)
14.Gross Power:1000-1800W
15.Assistant accessories: (1)Water cooling conditioner/water pump (2)Exhaust fan (3)Air pump
16.Recommended Accessories:Laser Tube,Mirror.
Application:
Marble,Acrylic,Double color board,Plexiglass,Wooden products,Bamboo products, MDF, Cloth, Leather,Glass, Ceramic tiles and so on.
Applicable Industry:
Advertisment,Decoration.Craftworks,Furniture,,Wooden package,Toy, Model, Clothes and so on.
506 Electronics Entertainment Suppliers
Short on time? Let Electronics Entertainment sellers contact you.
This small size laser engraving machine is specially designed for small size nonmetal material engraving. especially for rubber stamp and seal engraving .
The imported linear guide rail and step motor with reduce speed driver system to
Assure cutting stable and smooth incisionthe imported focus lens and metal reflect mirror from america have strong cutting ability and high precision we can supply different color shapes for your need
Technical index:
Processing area: 900mmx600mm
Laser power: 60-80w
Engraving speed;1-60, 000mm/min
Cutting speed: 1-10, 000mm/min
Minimum shaping character : chinese 2mm, letter 1mm
Advertising Engraving Machine Laser Cutting Machine Manufacturers In China
1325 Smart Laser Cutting Equipment is a high-power multi-purpose laser cutting machine. The flat cutting part adopts the gantry structure. With a unique deceleration design, the mechanical system is stable, the structure is stable, the rigidity is good, and the speed is high. Choose high-speed motor and driver, 24 hours long time running without losing step.
Advantages
1. Touch screen control system, USB offline use, more convenient to use; add break point continuation function.
2. The software is compatible with CorelDraw, AutoCAD, Photoshop and all kinds of graphic processing software. Directly original output function, none error.
3. The edge of cutting is smooth and there is no sawtooth .The software adopts continuous curve method to get faster cutting speed.
Specification of Advertising Laser Machine
Laser type Sealed CO2Â laser tube
Laser power 60W
Cutting area 1300*2500mm
Resetting position accuracy +/-0.05mm
Working voltage AC110-220V +/-10%.50-60HZ
Power 1500W max
Operating temperature 0-45 degree
Operating humidity 5-95%
Minimum shaping character English 1*1mm
Graphic format supported BMP, PLT, DST, DXF, and AI
Driving system Leadshine stepper Driving
Cooling mode Water-cooling and protection system
Auxiliary equipment Exhaust-fan, air-exhaust pipe, Air compressor
Controlling system DSP control systemâ??MPC6515
Compatible software Coreldraw auto CAD photoshop
Whole machine size 3000*1600*990mm
Machine Weight 600Kgs
Applicable Industry
1325 Laser Cutting Machine mainly used for advertisement, arts and crafts, leather, toys, garments, model, building upholstery, computerized embroidery and clipping, packaging and paper industry.
Applicable material:Â wood, timber, plywood, MDF, acrylic, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.
Laser Cutting Machine Manufacturers In China sells competitive prices, high-quality laser engraving machines, desktop fiber laser engraving machines. Welcome to browse our website and contact us.
China Fiber Laser Cutting Machine Laser Cutting Machine Factory
CX-T series intelligent laser cutting equipment is a special machine tool that uses laser technology to cut various graphics on pipes and profiles.With professional, high speed, high precision, high efficiency, high cost performance, etc. it is the ideal equipment for the non-contact metal pipe processing industry.
Advantages
1.Tube clamping and positioning: Both front and rear chucks use pneumatic chucks, one-button automatic centering, dual-drive rotation to ensure front-to-back rotation synchronization, short strokes, high efficiency, and no deformation of thin plates; ultra-short tailing: ultra-short Tail material processing, reducing raw material cost, lower cost, more possibility of driving;
2.power-off and continuous cutting: importer high-torque absolute value encoder servo motor ensures high speed and acceleration of the whole machine and has power-off continuous cutting function , Worry-free power failure, one-click reply cutting.
Specification
Model CX-T series fiber laser cutting machine
Machine Type CX-6020T
Pipe processing diameter range 20-220mm
Pipe processing length 6300mm
X-axis travel 6600mm
Y-axis travel 250mm
Z-axis travel 185r/min
Maximum speed of axis A 110r/min
Maximum speed of axis B 110r/min
Maximum speed of X and Y axis 105/30m/min
X, Y-axis Maximum acceleration 0.8G
Positioning accuracy of X and Y axis 0.05mm/m
Repeated positioning accuracy of X and Y axis 0.03mm
Blanking length 3000mm
System Pachul FSCUT5000D
Laser power 1000W-4000W Optional
Maximum acceleration (X,Y axis linkage) 1.3G
Maximum moving speed (X,Y axis linkage) 105m/min
positioning accuracy ±0.03mm/m
Repeated positioning accuracy ±0.02mm
Overall weight 6000KG
Overall size (length x width x height) 8000mm 3300mm 1950mm
Positioning accuracy of X and Y axis 0.05mm/m
Repeated positioning accuracy of X and Y axis 0.03mm
Applicable Industry of 4000w Fiber Laser Cutting Machine
Fitness equipment, smart furniture, petroleum pipelines, passenger car manufacturing, engineering machinery, shelf containers, agricultural and forestry machinery, cloud ladder fences, home appliance manufacturing, laser external processing services and other machinery manufacturing pipe processing industries and so on.
Machine Features
Integrated full steel body, low temperature tempering treatment,reduce the deformation rate;
Adopt flying ray with spontaneous movement of laser tube and gantry, effectively improve the laser efficiency
Super large laser processing format, suitable for large scale of mass production;
Equipped with high power laser tube, it can be a cutting thickness of 30 mm acrylic plate;
It uses USB put data interface with large mass storage device to provide high working speed and efficiency.
Support kind of formats:CDR DXF PLT AI BMP DST JPG and other formats.
Applications
Garment, leather, cloth toys, computer embroidery cutting, mould, crafts, bamboo and wood, advertising and building decoration, packaging and printing, paper and products, etc.
Rubber, plastic, cloth, leather, woollens, crystal, organic glass, tile, jade, bamboo and wooden products, etc.
Technical Parameters
Model
STL1325R
Working Area
1300*2500mm
Laser Power
YONGLI 130W (EFR/RECI)
Laser Type
CO2 Sealed Laser Tube, 10.6m
Cooling Type
Water Cooling
Engraving Speed
0-60000mm/min
Laser Output Control
0-100% Set by Software
Min. Engraving Size
Chinese: 2.0mm*2.0mm; English Letter: 1.0mm*1.0mm
Highest Scanning Precision
2500DPI
Locating Accuracy
+0.01mm
Controlling Software
Ruida RD Control System 6445G
Graphic Format Supported
DST,PLT,BMP,DXF,DWG,AI,LAS,etc
Compatible Software
TAJIMA,CORELDRAW,PHOTOSHOP,AUTOCAD,All type of AUTOCAD Software in Cloth
KBA18(C) HD camera is an upgraded version of KBA18(B) camera. The volume is one-third of the original size and the weight is one-fourth of the original. It is suitable for installation in all areas underground, especially in small spaces and large equipment underground. The camera is equipped with a 5 million high-definition camera, 5M high-definition resolution, and star illumination. Advanced video compression technology and ultra-low bit rate make the picture quality clearer and more delicate.
Website: http://www.huakeemining.com/
WhatsApp: +86 18560163019
Leapion fiber laser marking machine LF-20H use the world top brand parts,jcz ezcad control system , and imported high precision, high speed, large torque, performance is stable and durable, ensure the high speed operation of the whole machine., high power ,high precision.Top brand control system : automatic layout optimization.
Fiber Laser Marking Machine can mark logo, character, serial number, bar code, data matrix on both metals It does not have consumable. It's very cost effective. It boasts fast marking speed and high marking precision. It's widely used and well accepted in prevailing international market.
Pioneer cnc fiber laser cutting machine PF-3015S is specially designed laser cutter for carbon steel,stainless steel,aluminum,copper and other metal cutting demands.
PF-3015S laser cutter is suitable for 3000mmx1500mm plate steel cutting process. This machine is equipped with Raycus laser source,range from 1000w-4000w to suit different metal cutting thickness.Standard type will have Swiss Raytool laser head with auto focus function to higher working efficiency and cutting precision.Japan Yaskawa servo motor can ensure long time stable running condition,plate steel welded heavy duty machine bed can protect cnc laser cutting machine from deformation in longer lifespan.
This machine is widely used in steel fabric,kitchenware,fitness equipment,agricultural equipment manufactruing,lighting industry,metal craft cutting,automobile industry...etc.
High Speed Fiber Laser Tube Cutting Machine CNC Tube Laser Cutter For Sale
1.PG-6020L tube laser fiber cutting machine is professional tube cutting fiber laser machine, suitable for all kinds of stainless tube, round tube, square tube and oval tube.
2.It can satisfy various tube cutting process such as tube cutting-off,tube hole cutting,or any shapes cutting on tube surface.
3.The machine adopt Raycus laser source,Swiss Raytools auto focus laser head,Japan Yaskawa servo motor to give you perfect tube laser cutting performance meanwhile ensure long time stable running,less failure rate,maintenance costâ?¦etc
4.It can be also equipped with automatic material loading system to higher efficience,it is optional according to your demands.
High Power CNC Laser Cutting Machine Laser Cutter For Metal Processing
The series of pioneer PF-3025D laser cutting machine offers power ranges between 1000W to 10000W. One of the most efficient machine technologies for rapid sheet metal cutting which can cut the thickness for 50mm or less.
1. Saving Material ---- CNC control, it can cut the material in different shapes, improve the utilization rate and reduce waste.
2.Easy Programme ----high accuracy, cut to shape without molding, smooth finish, eliminating the process for edge modification.
3. Save Investment for Molding ---- Laser cutting without molding, eliminating the cost for molding and repair, save time, resulting in less manufacturing cost, reduce the cost of goods sold, particularly suitable for processing parts in large-size.
4. Protecting Environment ---- working area for laser cutting is fully enclosed, low noise, is clean, safe, free of pollution, totally improve the working condition and environment.
This PFG-3015D double-platform laser cutting machine is a fully enclosed laser cutting machine combining with tube cutting function.Full enclosure design can not only reduce the damage of laser radiation to workers, but also effectively prevent metal debris splash from causing damage to operators.The maximum power of this metal laser cutting machine can reach 20000W. It can be used for cutting, punching and engraving various precision parts and machine panel.The metal crafts processed by the optical fiber laser cutting machine have little heat effect on the cutting seam and generally do not need secondary processing.
Application Materials
Fiber Laser Cutting Equipment is suitable for metal cutting like Stainless Steel Sheet, Mild Steel Plate, Carbon Steel Sheet, Alloy Steel Plate, Spring steel Sheet, Iron Plate, Galvanized Iron, Galvanized Sheet, Aluminum Plate, Copper Sheet, Brass Sheet, Bronze Plate, Gold Plate, Silver Plate, Titanium Plate, Metal Sheet, Metal Plate, Tubes and Pipes, etc
Application Industries
Machines are widely used in manufacture Billboard, Advertising, Signs, Signage, Metal Letters, LED Letters, Kitchen Ware, Advertising Letters, Sheet Metal Processing, Metals Components and Parts, Ironware, Chassis, Racks & Cabinets Processing, Metal crafts, metal art ware, elevator panel cutting, hardware, auto parts, Glasses Frame, Electronic Parts, Nameplates, etc.
