Quick Information Brand Name:SaigaoPlace of Origin:China: Description We are Saigao group can do piston and Plunger pump. Such as the following: BW Series Mud Pump BW Series Mud Pumps are mainly used for supplying flushing fluid to the borehole in core, geothermal, water resource, shallow oil, CBM and other drilling process. The fluid can be divided into mud, water, etc. They also can be used as transfer pumps of the above-mentioned medium. This series of mud pumps are with simple structure and easy to maintain and operate. Piston, lip-shaped and self-sealing type, is made of rubber or PTFE and nylon pads, equipped with shock-resistant pressure gauge, necessary spare parts and special tools. Bi-metal liner can be used to extend service life of pump greatly. NBB Series Mud Pump NBB Series Mud pumps are mainly used for the core, coal geology, metallurgy geology, hydrogeology engineering hole drilling fluid is supplied, flushing fluid can be divided into mud, water, etc., may be used as the above medium pump. Structural features The mud pump is crank structure, horizontal triplex single acting piston pump, the piston is self-sealing lip, made of rubber or PTFE and nylon protective pads pressed, the pump adopts auto gearbox, variable five kinds of flow, the pump is compact, high efficiency, durable, safe, reliable, easy maintenance, low maintenance costs. ZB Series Grouting Pump ZB Series grouting pumps are mainly used for kinds of weak corrosivity viscous and nonviscous liquid grouting(such as water, mud), especially for vertical shaft working face grouting, goaf filling, coal mine water inrush governance and so on. The pump is triplex single-acting plunger high pressure pump, fitted with international first-class gearbox, which is of features like compact structure, multistage speed regulation, realizing different flow rate and pressure, meeting the grouting requirements of different formation. Electric motor drives triplex pump through transmission system. It has many advantages, like convenient adjustment for pressure and flow rate, long service life and so on. 3NB & 5NB Series Mud Pump 3NB & 5NB Series Mud Pumps are mainly used for oil, water well, geothermy, CBM, shale gas, coalfield exploration, freezing well as well as well other drilling ,well cementation, work-over and other operations in industrial and mining enterprises. It is used for transferring mud, clay gum, mortar and other medium to the borehole. The pump adopts international advanced technology. It is characterized by advanced structure, reliable operation, good suction performance, long service life of wearing parts, easy for maintenance and repairing and so on. F Series Mud Pump F Series Mud Pumps are mainly used in oil field and geological prospecting for well drilling, well work-over, cementing, water shut off, water flooding and sending mud, clay, grout and so on.
Pump Unit A beam and crank assembly creates reciprocating motion in a sucker-rod string that connects to the downhole pump assembly. The pump contains a plunger and valve assembly to convert the reciprocating motion to vertical fluid movement. As the beam pumping system rocks back and forth, this operates the rod string, sucker rod and sucker rod pump, which works similarly to pistons inside a cylinder. The sucker rod pump lifts the oil from the reservoir through the well to the surface. A beam pump is an artificial-lift pumping system which uses a type of reciprocating pump to extract oil from an inland well. Nodding donkeys or beam pumps are a common artificial lift system used in land-based operations. A pumpjack is the overground drive for a reciprocating piston pump in an oil well. It is used to mechanically lift liquid out of the well if not enough bottom hole pressure exists for the liquid to flow all the way to the surface. The arrangement is commonly used for onshore wells producing little oil. Because of their characteristic shape and motion, pumpjacks, also called beam pumps, are often given fanciful names such as "lonely birds" and "nodding donkeys." Whatever name you call them, such pumps are critical to crude oil production.
It can charge the lithium battery use of multi crystalline solar circuit board, also work while charging, effectively solve the problem of charging in some areas. The product has a lithium battery protection board developed by the company, solar control circuit board. Under the sunlight,. 9 hours can be filled, 8ah 12 hours can be filled with, the product is lanyue technology first, to fill the market blank automatic charging. Product features: 1 solar charge, with 15 watts of solar panels, charging efficiency of 17%, the use of life 15-20 2charge current indicator: equipped with a charging current meter, charging visible 3 over charge protection, lithium batteries are equipped with protective board, charging end automatically stop, current to zero 4 portable and high life lithium battery, life 800 times above. 5 the volume of 16 liters of spray molding barrel, the overall weight of about 4 kg. 6can be equipped with adjustable supporting pole, solar panels must be in a certain angle conversion efficiency is the highest, through the support bar to adjust angle to achieve the best efficiency. Note: 1the solar panel must be placed in the sun before it can effectively charge, solar panels can not block (or part of the block), otherwise it can not charge 2the charging efficiency and the solar panel support angle, so it can be adjusted according to the current number of the right angle 3 the solar energy conversion efficiency and light intensity of the solar panels, the higher, the cloudy day is weak, the highest at noon, the morning and evening weak. 4equipped with a lithium battery of the spray quality is lighter, easy to tilt when placed, so the charge time can be poured into the barrel in the barrel to increase the stability of the bucket. 5avoid collision, hard damage Carton
Material: cast iron performance: non-blocking drive mode: electric pump shaft position: horizontal impeller structure: semi-open impeller UHB - ZK corrosion resistant mortar pump is a single-stage single-suction cantilever type centrifugal pump, the company is specifically designed for power plant flue gas desulfurization and sewage treatment project design and development, the pump adopts the steel lining ultra-high molecular weight polyethylene (uhmw-pe), which has very good corrosion resistance and good wear resistance. This pump is widely used in the temperature is below 100 degrees, the solid content (hard soft particles unlimited) not more than 40% of any concentration of acid, alkali and salt (including chloride medium) strong oxidant, organic solvents, such as the medium of transmission, can completely replace the imported products, is used for flue gas desulfurization plants or all kinds of chemical enterprise environmental protection standard of an ideal special pump. Product features: The uhb-zk series of anti-corrosion resistant mortar pump is a kind of pump which can adapt to various conditions, such as conveying acid, alkaline cleaning liquid or slurry. Various corrosive minerals in the smelting industry; A variety of dilute acids in the sulfuric acid industry; Environmental protection industry all kinds of sewage and so on. The pump is corrosion-resistant and wear-resistant and is widely used. It has the following characteristics: 1) strong wear resistance, flow components are all made of steel lining ultra-high molecular weight polyethylene (uhmw-pe) manufacturing, ultra-high molecular weight polyethylene (uhmw-pe) wear resistance among the top of the plastic, than nylon 66 (PA66), polytetrafluoroethylene (PTFE) 4 times, is carbon steel, stainless steel wear resistance of 7 to 10 times. 2) a strong resistance to impact, the impact strength of ultra-high molecular weight polyethylene first on the list of general engineering plastics is (acrylonitrile/butadiene/styrene copolymer (ABS) five times, and can maintain stability under 196 â?? below zero, it is not by any other plastic feature. 3) excellent corrosion resistance: the pump in a certain temperature and the concentration range can all kinds of corrosive medium (acid), alkali, salt and organic solvents, at 20 â?? and 90 â?? for 80 kinds of organic solvent impregnated 30 d. There was no abnormality in appearance, and there was little change in other physical properties. 4) noiseless: the high molecular weight polyethylene impact energy absorption is the highest in plastic, and the sound absorption is good, thus minimizing the noise caused by liquid flow during conveying. 5) safe and reliable, no toxin decomposition: the pump adopts uhmw-pe high molecular weight polyethylene (uhmw-pe), which is extremely stable and therefore suitable for use in the food industry.
IS single-stage single-suction centrifugal pump Advantages of performance machine: 1. Excellent hydraulic model 2. Efficient energy saving 3. Wide application 4. Installation and maintenance is simple Application scope: 1. Heating system 2. Central air-conditioning 3. Water for life 4. Industrial process 5. Circulating supercharging ISG series single-stage single suction vertical centrifugal pump Performance and advantages Wide application High efficiency and energy saving Pipe structure Small footprint Small vibration Low noise Reliable sealing
NSQ submersible sludge pump is hydraulic machinery, the motor and the pump of which are coaxially submerged in medium to work. The overflowing parts of the pump are made from high alloy wear-resistant material, so the pump has good wear resistance and large flowing passage. It is applicable for conveying media such as sludge, ore slurry, coal slurry, sandstones containing big solid particles. The product is designed and manufactured by domestic and oversea advanced technologies. Besides the main impeller, the bottom of the pump is additionally provided with a set of agitation impeller which can spray the deposited sludge into turbulent flow, and therefore the pump realizes high-concentration conveying under the condition of no auxiliary device. The unique seal device can effectively balance the pressure inside and outside the oil chamber, so as to protect the reliability of the mechanical seal to the maximum extent. The motor adopts various protective measures such as overheat protection, water inle t detecting protection, and can operate safely for a long term in harsh working conditions. The pump is applicable for pumping sand for building, silty sand, silt, tailing slurry, ore, iron sand ore, sediment in sewage treatment works, etc. Structural Property 1.The whole machine is dry submersible pump, and the motor adopts oil chamber seal mode and is provided with mechanical seal inside, so that high pressure water and impurities are effectively prevented from entering inner cavity of the motor. 2.Besides the main impeller, there is the agitation impeller which can agitate the sludge deposited on the water bottom into turbulent flow and pump the sludge out. 3.The trans-flux parts such as the impeller and the agitation impeller are made from high-hardness high chromium cast steel, have wear resistance, corrosion resistance and strong drainage capacity, and allow big solid particles to pass. 4.The motor is submerged in water, is not limited by suction stroke, and has high sludge suction rate and thorough desilting. 5.The integral device is simplified, needs no auxiliary stirrer device or ejector device, and has simple and convenient operation and low total investment of the unit. 6.The agitation impeller directly approaches the depositional surface, and controls the concentration through submerged depth. Under the condition of large medium proportion, an auxiliary device can be arranged to increase the concentration of the medium. Use Conditions 1 The power source is 50Hz/380V three-phase alternating-current supply, and the capacity of the substation transformator is two to three times of the rated capacity of the motor. 2 The temperature of the medium cannot exceed 60íµ, and the medium does not contain inflammable or explosive gases. 3 The maximum weight concentration of the solid particles in the medium: the maximum weight concentration of the ash is 45% and the maximum weight concentration of the slag is 60%. 4 The submerged depth of the unit is not more than 20 meters, and the minimum submerged depth takes submerging of the motor as reference. 5 The unit works in the medium vertically, and the working status is continuous. Weight is 210KG.
Our plants are specialized in producing wide range of replacement parts for triplex mud pump(such as fluid end module, liner, piston, valve&seats, and a full line of module parts) for brand name mud pumps, including emsco, national, ideco, gardner denver, oillwell, opi wheatly, wilson, wirth, ellis willianms, skytop, brewster etc. All items are manufactured to api 7k quality standards. Module descriptions: Heat-treated and internally hardened for high durability; available in various materials to meet a wide range of applications; standard one or two-piece configuration, with designs available for pressure of 5000psi(35.1mpa), 7500psi(52.7mpa), and 10000psi(70.3mpa); discharge connections available on each side; suction connections on each side or front center. Material is 35crmoa or 40crmonn alloy forged steel. To get better fiber texture, we use electric stove for second forging, or deoxidation treatment. It is forged from three directions and the forging ratio is not less than 4.0:1.0. It can not have crack, impurity, looseness, overburns, etc. And weld is not allowed. It should be confirming to the stipulation of jb/tq252-81, and should be checked by grade3 after quenching the rough module will be rough processed, then the hull hardness is hb285-330.
Concrete pump, 40/60/80 m3/h
M-Series air driven liquid pump uses a built-in pneumatic control four-way two-position valve to move to and fro automatically. This series of product is produced by introducing related technology abroad and designing according to the standards of our country. The air driven parts are all made of aluminum alloy and are treated with oxidation. The pump head is made of carbon steel or stainless steel according to different media. The diameter of the drive piston of this series is up to 80mm, air pressureâ?¤8bar. This kind of pumps has the following characteristics: Light weight, portable design Large flow, wide pressure range Apt to control, both manual and automatic controls are available. Appropriate for most fluid No electricity is needed. Easy to maintain OG series of pump uses single pneumatic non-equilibrium gas distributing valves to move to and fro automatically. The drive parts of the pump are made of aluminum alloy. These parts are treated with oxidation into black to ensure their good-looking appearance and stainless performance. The fluid contacting parts are made of carbon steel or stainless steel according to different media. The full set of sealing parts is imported, to ensuring pumps performances. The diameter of drive piston is 100mm. The maximum drive pressure is 10bar. We suggest customers use air pressureâ?¤8bar to ensure long lifespan of the pump.
we are specialist of SDLG, LONKING, XCMG, FOTON-LOVOL, XGMA, LIUGONG, SHANTUI, SEM, CHENGGONG, CHANGLIN spare parts, we work with factory directly, good quality and more competitive!! We assure you our products will bring you a good profit! wechat/whatsapp: 0086 155 0868 8970 LG50F.04318ALG50F.04319ALG50F.04320ALG50F.04321ALG853.04.01.02.01GB/T9877.1-1998LG853.04.01.02-003LG853.04.01.02-004GB/T297LG853.04.01.02-005LG853.04.01.02-006LG853.04.01.02-007LG853.04.01.02-008GB/T297LG853.04.01.02-009/010GB/T283-94LG853.04.01.02.02LG853.04.01.02-013GB/T297-94LG853.04.01.02-014LG853.04.01-004GB1235-76LG853.04.01-007LG853.04.01-008LG853.04.01-001/002LG853.04.01-011LG853.04.01-010LG853.04.01-009LG853.04.01-012LG853.04.01-005LG853.04.01-006GB/T309-84LG853.04.01-021LG853.04.01-013LG853.04.01-014GB/T297-84LG853.04.01-003LG853.04.01-015GB/T297-84GB/T9877.1-1988LG853.04.01-018LG853.04.01-019LG853.04.01.02LG853.04.01.03LG853.04.01-022LG853.04.01.02.02-002LG853.04.01.02.02-003LG853.04.01.02.02-004LG853.04.01.02.02-005LG853.04.01.02.02-006911.115-2201080LG50F-023HALG855.05.01.01LG856.06I.02LG853.06.08CDM855.06.14CDM855.06.13STEERING REPAIR KIT52803000101LG855.06-001LG853.06.10CDM856E.07I.10TILT CYLINDER REPAIR KIT36608090160LG853.07.22CDM855.07.02LIFT CYLINDER REPAIR KIT52130000101LG50EX.07.06.02DXS-00LG50EX.07.11.04LG853.13.08.04CDM856.13.09.01CDM856.13.09.02LG853.13.08.02LG856.08.02LG853.08.09LG853.08.08LG853.08.01LG853.08.01.03LG853.08.01.04LG853.08.01.02LG50EX.09.01LG50EX.09.02LG50EX.09.03LG853.11.07LG853.11-004LG853.11.08LG853.11-003LG853.11-005LG855.11III.01-016LG855.11III.01-024LG855.11III.01-026LG853.15.09LG853.15.10CDM853.15.22LG853.15.12LG853.15.14LG855.15.45CDM858A.15II.48
GY type molten salt adopts effective cooling means, reasonable structure and material, making it a reliable delivery of high temperature molten salt (nitrate) below 540 °C. This series of products has the characteristics of high efficiency, stable operation, low vibration, low noise, long service life, less maintenance, low maintenance cost, etc. The quality has reached the level of similar foreign products. Please consult with Jinan Warwick Pump Co., Ltd. for the detailed structure of the pump.
The Negative pressure RSR series Capacity:0.86-452m3/min Pressure:-9.8--49kpa Motor:0.75-475kw 1.Payment terms: T/T(30% in advance and balance before delivery);L/C 2.Packing: Standard exporting wooden/iron box packing. 3.Delivery time: Commonly 20 days after receive advance payment(from our factory to your Karachi port) 4.Certificate: CE or any clients indicated.
This series of pump uses single pneumatic non-equilibrium gas distributing valves to move to and fro automatically. The drive parts of the pump are made of aluminum alloy or stainless steel. The full set of sealing parts is imported. The maximum drive pressure is 10bar. We suggest customers use air pressureâ?¤8bar to ensure long lifespan of the pump. The diameter of the drive piston is 160mm. This pump is single acting. The pump heads can cool the exhaust air. This series of pump has single stage. To reach the needed pressure, the input gas should be pressurized to some degree in advance. The pre-adding pressure is different according to the needed maximum pressure. The maximum pressure can be up to 80Mpa. The reversing way of OMD-Series is the same as that of OMA-Series, but OMD-Series has double pump heads, which is designed based on OMA-Series. The pump is made of aluminum alloy and stainless steel. The diameter of its drive piston is 160mm, drive gas pressureâ?¤8bar. Both pump heads can cool the exhaust gas. The pipelines which connect the two inlets and two outlets will be completed according to customers requirements before they leave the factory. OMT-Series This series of pump has double stage. It can amplify extremely low pressure into very high pressure. The drive gas pressureâ?¤8bar. The rage of inlet gas pressure is 0.5-10bar. The maximum pressure can be up to 80Mpa. The pump is made of aluminum alloy and stainless steel. The diameter of its drive piston is 160mm. Both pump heads can cool the exhaust gas.
The product is manufactured according to the standard GB/T16750-2008. Application: Cable Rated voltage: 1.8/3---3.6/6kv Cable normal operating temperature between 90--250celsius degree Production range of cable: The cross-sectional area is 10-53mm2 and the core number is three. Type and designation:
we are specialist of SDLG, LONKING, XCMG, FOTON-LOVOL, XGMA, LIUGONG, SHANTUI, SEM, CHENGGONG, CHANGLIN spare parts, we work with factory directly, good quality and more competitive!! We assure you our products will bring you a good profit! wechat/whatsapp: 0086 155 0868 8970 GB890-80LG853.03.01.03-002GB1235-76LG853.03.01.03-008LG853.03.01.03-001GB1235-76HG4-692-67GB893.1-84GB276-82LG853.03.01.03-005LG50EX.03.01.01-001GB283-94LG853.03.01.03-006LG853.03.01.03-001LG853.03.01-003LG853.03.01-006LG853.03.01-008GB/T1235LG853.03.01.06-001LG853.03.01.06-003LG853.03.01.06-002LG853.03.01.02-011LG853.03.01.07LG853.03.01-007LG853.03.01.02-014GB/T894.1GB/T276LG853.03.01.02-015LG853.03.01.02-013LG853.03.01.02-012LG853.03.01.02-009LG853.03.01.02-005LG853.03.01.08LG853.03.01.02-003LG853.03.01.02-004LG853.03.01.09-002LG853.03.01.02-004GB/T276LG853.03.01.02-016LG853.03.01.02-006LG853.03.01.02-008GB/T309LG853.03.01.02-007LG853.03.01-010LG853.03.01-011LG853.03.01.02-010GB/T893.1LG853.03.01.04-003LG853.03.01-020LG853.03.01-022LG853.03.01.15LG50EX.04.01CDM856E.04I.01CDM856E.04.02CDM856E.04I.03CDM856E.04I.05LG50F.04301ALG50F.04303A-304AGB/T9877.1-1988LG50F.04305AGB/T297-94LG50F.04307ALG50F.04308AGB/297-84LG50F.04309A-310ALG50F.04311A-312ANJ2309VMRLG50F.04314A47620/47686LG50F.04315A-323ALG50F.04331ALG50F.04332ALG50F.04401ALG50F.04402A-404ALG50F.04405ALG50F.04406ALG50F.04407ALG50F.04408ALG50F.04409ALG50F.04410BGB.894.1-86LG50F.04414ALG50F.04415ALG50F.04419ALG50F.04420ALG50F.04421AGB/T297-94LG50F.04422ALG50F.04423ALG853.04.01-019GB/T297-94LG50F.04425ALG50F.04426AGB9877.1-88LG50F.04427ALG50F.04400A408100LG50F.04002ALG50F.04300ALG50F.04317A
Product Nameï¼?SINOTRUK HOWO Truck Spare Parts-Water Pump-VG1500060051 Product Descriptionï¼?Mainly used for SINOTRUK trucks, Parts Number: VG1500060051 Packaging Methodï¼?Wooden cases or Carton boxes or designed by customers' requirements. Delivery Method ï¼?By sea or by air or discussed with customers. Delivery Timeï¼?Within 10 workdays after receiving the deposit. Trade Termï¼?EXW, FOB, CFR, CIF, DAF, etc. After-sales serviceï¼?Response and provide satisfactory solutions within 24 hours. Our Advantages: Competitive Price ; Durable Quality ; On Time Delivery ; Excellent After-sales Service.
Oee is a large mud pump, fluid end expendables and drilling wellhead tools manufacturer in china. We mainly manufacturer emsco f-500, f-800, f-1000, f-1300, f-1600, gardner denver pz-9 and national 12-p-160 mud pumps. The quality products, competitive prices, respensive service and short delivery time earn a lot of reputation for us. F series mud pump is applicable to the requirement of high pump pressure in oilfield and high displacement technology of well drilling with its solid and compact structure, small vallume and outstanding operation performance .It has long stroke maintaining operation at lower frequency resulting in enhancing the performance of giving water efficiency and prolonging the lifetime of the consumable hydrokinetic parts. The air-suction kit is advanced in structure and reliable at operation to reach the optimized absorbing target of air suction into linepipe. F series pump powering side adopts the combined lubrication of forced and flashing lubrication featured with reliable lubrication and adding the operacation lifetime of powering part. The series pump is producted strictly according to api spec 7k"the equipment specification of well drilling and repairing" , and performed the ex-work test under the specification thereof.
Model pz-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance. The pump consists of two main sections: power end & fluid end. Power end includes pump case pinion shaft, crankshaft, back cover, connection rod, crosshead etc. Fluid end includes valve pot assembly, valves, cylinder liners, pistons, discharge manifold and suction manifold, etc. In order to prevent the water-hammer and reduce pressure difference in the outlet side, of the pump. The gears, bearings, crosshead in the power end adopt splash system and pressure lubrication system. This guarantees a good lubrication. The cylinder liners & the pistons in the fluid end is cleaned and cooled by a centrifugal spray pump with lubrication water. This pump has a complete set of special tools for general maintenance & repair. Technical specifications (1)type: horizontal triplex single acting piston pump. (2)rated input power 1000hp (3)rated speed: 130spm (4)stroke length 9"(228.6mm) (5)rated speed of pinion shaft 582 rpm (6)gear ratio: 4.48: 1 (7)valve standard: api7# (8)suction inlet 10" (9)discharge outlet 5 1/8" (5000psi) (10)overall dimension 205x94x100.5in (5200x2388x2550mm) (11)pump weight 44050 ib(20000kg)
YRY series submerged pump is a single-stage single suction vertical high temperature submerged centrifugal pump. This series of pump, design professional, with excellent heat resistance, long life, high efficiency, good sealing performance, low niose, small footprint, high cooling efficiency, reasonable structure and so on. This pump is dedicated to pumping less than 500 high temperature molten salt and heal conducting oil. This pump is widely used in the technological process of phthalic anhydride, maleic anhydride, acrylic acid, acrolein, fumaric acid, melamine, refrigerants, aluminum magnesium industry, PMDA industry etc. It can also be used for transmission of heating medium in rubber, plastic, building materials and other insustries. In addition, it can be used to pumping more than 100 hot water and other heat medium. This series of pump, adopting different structures and materials according to different media. Especially for those with larger liquid depth, we have patented structure design, and that can completely replace imported products.
Gy type molten salt pump is independently developed series products of the molten salt pump. Gy type molten salt pump is designed by jinan warwick pump co., ltd. It is on the basis of experience of producing at high temperature liquid pumps and pump of the molten salt solution. It references the same type of foreign products. And it is a molten salt circulation system or molten salt transport of special high temperature pump. Gy type molten salt pump is used in conveying high temperature molten salt (nitrate) for melamine project, alumina projects and caustic soda project and other fine chemical industries. Gy type molten salt pump is used in conveying high temperature molten salt (nitrate) for melamine project, alumina projects and caustic soda project and other fine chemical industries. -
