Description 20622A Gland Assembly for Mission 4x3x13 Mud Pumps. offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
Back Liner SP20041A05 is used for 200SV-SP Vertical Slurry Pump. Slurry Pump Frame Plate Liner Insert is a wear part of slurry pumps, It is also called for slurry pump back liner based on locating position in slurry pump structure, Frame plate liner insert forms a pump chamber with throat bush and volute liner where the slurry would flow through them, offers frame plate liner inserts are interchangeable with warman pump frame plate liner inserts with high chrome, natural rubber, polyurethane for different working condition.
manufacture Andritz ACP paper stock pumps and pump spares: ACP 65-315, ACP 100-500, ACP 65-250, ACP 100-315, ACP 125-400, ACP 150-500, ACP 100-250, ACP 125-315, ACP 150-400, ACP 200-500, ACP 300-700, ACP 125-250, ACP 150-315, ACP 200-400, ACP 400-700, ACP 250-315, ACP 300-400, ACP 450-550, ACP 600-700 etc. ANDRITZ ACP and S series Pump Specifications: Design:single-stage, single-flow, open and semi-open impeller Consistency:up to 8% Head:10-180 m Flow rate:up to 8,000 m3/h Pressure:up to 40 bar Temperature:up to 200 Efficiency:up to 90% ACP Centrifugal Pump Design: Impeller(230) Accelerating the medium by charging it with energy. Semi-open impeller with vanes on the back. Spiral casing (102) Guiding the medium with a favorable flow pattern, converting speed energy into pressure energy. Pressure-sealed pump casing with delivery and suction channels. Suction and delivery flange. Holds the bearing housing with bearing assembly, shaft and impeller. Pump shaft (211) Holding the impeller, shaft seal, bearing assembly and coupling. Transmitting the drive energy to the impeller and thus, to the medium. Sturdily dimensioned drive shaft. Bearings Interface between stationary and rotating parts. Absorption of axial and radial forces. Impeller side: Two angular contact ball bearings (321.1) with steel cage. Drive side: One deep groove ball bearings (321.2) with steel cage. Shaft seal Depending on operating requirements, there is a choice of eight different shaft seals: Cartridge mechanical seal - single Cartridge mechanical seal - double Standard cartridge mechanical seal - single Standard cartridge mechanical seal double Single standard mechanical seal Tandem mechanical seal Stuffing box packing Dynamic shaft seal
HIGH SPEED TUBULAR SEPARATOR Best factory price of Tubular centrifuge machine High speed solid liquid separate tubular centrifuge Structure and principle The separator consists of machine body, driving part ,bowl, liquid collecting pan and liquid in bearing seat etc. The material is sprayed onto the bowl from the inlet on the bottom and strong centrifuge force is formed when the bowl rotates with the material and that makes the material flow upper along the wall of the bowl and then separated because of the different gravity by the centrifugal force. GF for separation: Heavy liquid forms outer ring and light liquid forms inner ring. They flow to the top of the bowl and discharge from their respective outlet. And the little solid is settled on the wall of the bowl and discharged manually after the machine stops. GQ for clarification: Heavy solid is deposited on the inner wall of the bowl and forms the sludge. And it will be discharged by manual after the machine stops. The clear liquid flows out of outlet from the top of the bowl. It is mainly used for separating all kinds of suspension difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. The motor connect with the big pulley and delivery the power to the spindle through the belt, tensioner and small pulley and rotate with the bowl in high-speed as the clockwise. The high speed tubular centrifuge is mainly used in liquid solid separation, liquid liquid solid separation in bio pharmacy, beverage, chemical industry. It is an ideal separation equipment by centrifuging, especially for those feeding with little gravity difference, and small dimension in diameter.
Slurry pump, vertical pump, gravel sand pump, submersible slurry pump, horizontal sand pump, paper pulp centrifugal pump, water pump, slurry pump parts.
Progressive Cavity Pump, Screw Pump, Progressing Cavity Pump, Pc Pump, Pump, Skid Mounted Equipment.
Solar water pump,solar deepwell pump,solar submersible pump.
Commercial booster pump series household booster pump series, household water purifier.
Diaphragm pump, powder pump, sanitary pump, magnetic pump.
Vacuum Pump Coupling Metal Parts
1. Stop and start the pump automatically. 2. Stop the pump in the case of water shortage. 3. After power cut off, it can restart the pump automatically when the power on. 4. Protect the pump from damage caused by overheat. 5. Forced start. Product name Pressure control Color BLUE-GREY-BLUE Voltage 220-240V 110V-120V Frequency 50/60HZPower 1.1KW(220V-240V) 0.75KW(110V-120V) Start pressure setting 1.0BAR 1.5BAR 2.2BAR Interface thread G1 Protection level IP54 Maximum working temperature 60
Fuel meaurement unit is installed in the high-pressure oil pump into the position for adjusting the fuel supply and fuel pressure value, controlled by the ECU. In addition to Fuel Metering Valve,The most common parts ordered include such as Nitrogen Oxygen sensor, Fuel Pressure Sensor, Fuel pressure limiting valve, etc. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fule metering valve Fuel measurement valve 2.Certification: CE, TS16949 3.Model NO.: 0928400481 4.Function: Control emissions in combustion environments 5.Application: BOSCH CUMMINS DAF IVECO 6.Ciondition: 100% NEW 7.Weight(g): 190.2g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
Head rotor, injector nozzles, plunger, element, delivery valves, control valves, cam plate, manget valves, drive shaft, ve pump, feed pump.
Diesel, nozzle, valve, plunger, repair kit, ve pump parts, pencil nozzle, feed pump, cam plate, drive shaft.
Provides various kinds of marine spare parts: diesel engine, main engine parts, auxiliary engine parts, turbocharger, air compressor, pump, piston, cylinder.
Chemical process pumps cover CQB, IHF, FSB, FZB, IMD, ZMD, FYH fluoroplastic magnetic pumps, CQF, UHB-ZK, MP, QBY, FYU engineering fluoroplastic pumps, CQ, ZCQ, IH, QW, ZW, ISG, DBY stainless steel pumps, and a variety of valves, environmental protection adhesives- hot melt glue, including medical pressure-sensitive adhesive, glue for shoes, glue for tapes and labels, glue for other applications.
Fuel pump, fuel nozzle, flow meter, valve, diaphragm pump.
Gearbox and vacuum pump.
Mud pump, mud pump parts, valve seat, valve body assembly, tubing coupling, casing coupling, piston, piston rod, cylinder liner, intermediate rod.
The cooling systems, water tower, pumps, valves, flanges, fittings snowmaking systems..
