Product Name: Maltitol
Molecular Formula: C12H24O11
CAS No.: 585-88-6
Maltitol is polyol form maltose after hydrogenation,has liquid and crystalline products. Liquid product is from high quality maltitol. As the raw material of maltitiol, the content of maltose is better over 60%, otherwise the Maltitol will then only take bleow 50% of total polyols after hydrogenation, and then cannot be called Maltitol. The main hydrogenation procedure of maltitol is: raw material preparation-PH value adjust-Reaction-Filter and decolor-Ion change-Evaporation and concentration-Final product.
UV absorbent UV-531 is a kind of anti-aging additives with excellent performance and high efficiency, can absorb 270-340 nm UV light, with light color, non-toxic, good compatibility, small migration, easy to process and other characteristics. It provides maximum protection to the polymer and helps to reduce color, while delaying yellowing and arresting the loss of physical properties. It is widely used in PE, PVC, PP, PS, PC, plexiglass, polypropylene fiber and ethylene vinyl acetate and other aspects. And for the dry phenolic and alkyd varnish, polyurethane, acrylic acid, epoxy and other air-drying products and automobile refit paint, powder coating, polyurethane, rubber products, etc., to provide them with good light stabilization effect. The dosage of 0.1% to 0.5%.
Toluene diisocyanate (TDI) is an aromatic diisocyanate that is a clear, pale yellow liquid with a sharp, pungent odor, which is insoluble in water and miscible with most common organic solvents. TDI (CAS No. 26471-62-5) consists of two isomers: toluene-2,4-diisocyanate (2,4-TDI) (CAS No. 584- 84-9) and toluene-2,6-diisocyanate (2,6-TDI) (CAS No. 91- 08-7), which is commercially produced in different ratios. The most common ratio is 80% 2,4-TDI/20% 2,6 TDI. TDI is widely used and accounted for 34% of the global isocyanate market in 2000
Tdi 80/20 is used for Flexible Polyurethane Foam and other other polyurethane applications including elastomers,synthetic leather,coated fabrics,paints and adhesives.
It is spray-applied,closed-cell polyurethane foam system with high fire resistance properties.it applies to all kinds of spray-applied thermal insulation engineering,such as building exterior cold rooms,large-scale pipeline,etc.
Pure ethyl acetate is a colorless, transparent and aromatic liquid,Ethyl acetate is an important organic chemical raw material and industrial solvent because of its excellent solubility and quick drying.
Ethyl acetate is a kind of chemical.It is a kind of widely used fine chemical products with excellent solubility, fast drying and wide application. It is a very important organic chemical raw material And excellent industrial solvents.
Clear, flammable, volatile liquid with fruit fragrance. Specific gravity: 0.902, Melting point: -83 �ºC, Boiling point: 77 �ºC.Refraction rate: 1.3719, Flash point (in open cup): 7.2 �ºC. Soluble in water, ethanol, and aether. Could form azeotrope with some solvent.
N-butyl chloride is also known as 1-chlorobutane,an organic compound,a colorless liquid,insolublein water. In the pesticide industry,it is mainly used in the synthesis of pesticides Nitriconazole.In the pharmaceutical industry,it is used in the production of intermediates ofmedicine pautaxone and animal repellents.In the synthetic rubber industry,it can be used in the preparation of catalyst butyl lithium.In the organic chemical production,it can be used in producing dibutyl aluminum laurate,as the solvent of some insolublecompounds,such as methylxanthone,polyether and other production solvents.In theanalytical chemistry,it can be used in producing butyl cellulose butylation reagent,etc.
S-butyl chloride is also known as 2-chlorobutane. It is an organic compound,a colorless liquid,and insoluble inwater. It is organic synthesis intermediates and solvents.it can be used in drugs,plasticizers,insecticides,rubber,resins,surfactants.It is also the main raw material for the preparation of dibutylmagnesium,sec-butyl and di-sec butyl disulfide.
12815 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
Melting point -46 �°C
Boiling point 209-210 �°C(lit.)
density 0.806 g/mL at 25 �°C(lit.)
vapor pressure 12.4Pa at 20�ºC
refractive index n20/D 1.4359(lit.)
Fp 165 �°F
storage temp. Sealed in dry,Room Temperature
solubility miscible
form Liquid
pka 10.07�±0.28(Predicted)
color Clear colorless to yellow
Water Solubility miscible
LogP 1.99 at 23�ºC
EDTA-2NA is a white crystal powder with two crystal water,
easy to lose crystal water when dried and easy to soluble in water,
but hard to soluble in organic solvents like alcohol or ethyl ether.
The pH value of 5%(25 �°C ) aqueous solution is 4.0~6.0.
EDTA-2Na is used in detergent, liquid soap, shampoo, agricultural chemicals,
fixer solution for development of color film, water cleaner, PH modifier.
Ethylene glycol/MEG is also known as ethylene glycol, 1, 2-ethylenediol, or EG for short. Chemical formula is (CH2OH)2, is the simplest dihydric alcohol. Glycol is colorless, odorless, sweet liquid, low toxicity to animals, glycol can be mutually soluble with water, but in the ether class solubility is small. Used as solvent, antifreeze and synthetic polyester raw materials. The polymer of ethylene glycol, polyethylene glycol (PEG), is a phase transfer catalyst and is also used in cell fusion.
Items Specification
Appearance: Clear,colorless liquid
Purity %min 99
Diethylene glycol %max 0.05
Color(APHA)max 10
Water content % max 0.1
Ash,wt.% max 0.005
Chlorides(as CL),ppm max 0.1
Iron,ppm,max 0.07Application
1. Used for making polyester fiber, polyester resin, dehumidifying agents, plasticizers, surfactants, synthetifibers,
2. Can be used as a dye / ink solvent, the preparation of the engine antifreeze, gas dehydration. For the production of synthetic resin, PET, or polyester fiber grade PET, bottle grade PET film used to produce mineral water bottles.
3. Can also produce alkyd resins, also used as antifreeze.
Product Introduction:
Lauric Acid is used in many applications, including: anionic and nonionic surfactants, and raw material for emulsifiers. Used in the rubber industry as an activator/accelerator/ plasticizer and softener.
Widely used in pharmaceuticals, surfactants, soaps, detergents, cosmetics, daily chemicals.
Product Functions&Applications:
1. Lauric Acid mainly used in the production of alkyd resin, wetting agent, detergent, pesticides, surfactants, food additives and cosmetics raw materials.
2. Lauric Acid used as a surface treatment agent for the preparation of adhesive. It is also used in the manufacture of alkyd resin, chemical fiber oil, pesticides, synthetic spices, plastic stabilizer, gasoline and lubricating oil.
3. Lauric Acid is the raw material for producing soap, detergent, cosmetics, surfactants and chemical fiber oil.
Vaseline is a semi-liquid mixture of alkanes or saturated hydrocarbons, also known as petrolatum, which is obtained by fractional distillation of petroleum. Its state is between solid and liquid at room temperature, and there are three colors of brown, yellow and white due to different uses. Natural petroleum jelly is derived from petroleum residual oil concentrates such as paraffinic heavy oil; artificial petroleum jelly is derived from a mixture of mineral oil thickened with pure ceresin, paraffin and paraffin grease. Vaseline has a smell of mineral oil, but no kero sene. Can be used as raw materials for medicines and cosmetics, and also for machine lubrication.
1.Helps soothes chapped skin.
2.Highly effectively protests the skin from the drying effects of weather.
3.Retains essential moisture in your skin leaving it nourished and radiant.
Application
Vaseline is a mineral wax, it will not be absorbed by the skin, it can form a protective film on the skin surface, so that the skin's water is not easy to evaporate and lose, and it is extremely insoluble in water, and can adhere to the skin for a long time, so it has a very Good moisturizing effect, very suitable for dry skin. Can be used as lip balm, hand cream, face or body, is a very good moisturizer. It also has the effect of removing scars. 2. Vaseline is non-irritating, stable and difficult to deteriorate, and it is not easy to cause human sensitivity. It is most suitable for people who are allergic to the fragrances and alcohols added to general moisturizing product.
Caprylic acid/capric acid triglycerides are clear to light yellow, high clarity and odorless oils, and are derivatives of palm oil or coconut oil. Widely used in industries such as food, medicine, and cosmetics, it can be used as a base material for moisturizing factors, a stabilizer for cosmetics, an antifreeze, and a homogenizer.
Bis(2-hydroxypropyl) Ether is commonly used as a plasticizer, an intermediate in industrial chemical reactions.
Properties: Dipropylene glycol is a kind of high purity product, suitable for flavor, cosmetics and other applications sensitive to odor. It is an odorless, colorless, water-soluble and hygroscopic liquid. Dipropylene glycol has a low vapor pressure and a moderate viscosity.
Application
Used in the manufacture of polyester resin. It is used as the solvent of cellulose acetate, cellulose nitrate, shellac varnish, castor oil, the component of fiber lubricant, and the preparation of plasticizer, fumigant, synthetic detergent, etc. In addition, dipropylene glycol can be used alone or in combination with diethylene glycol to extract aromatic hydrocarbons from hydrocarbons.
(1) Chemical synthesis: Dipropylene glycol is often used to synthesize other chemicals, such as polyethers, polyesters, etc.
(2) Solvent: Since dipropylene glycol has good water solubility, it can be used as a solvent to dissolve or dilute other substances.
(3) Spices and condiments: Dipropylene glycol can be used as a food additive to increase the taste and flavor of food.
(4) Cosmetics: Dipropylene glycol can be used as a moisturizer in cosmetics to improve the moisturizing effect of cosmetics.
(5) Pharmaceuticals: Dipropylene glycol can be used in the pharmaceutical field as a carrier or auxiliary for drugs.
Usage
1) Dipropylene glycol is the most ideal solvent for many fragrance and cosmetic applications. This raw material has good water, oil and hydrocarbon co-solubility and mild odor, little skin irritation, low toxicity, uniform distribution of isomers, excellent quality.
2) Dipropylene glycol can also be used as a coupling agent and moisturizer in a variety of different beauty cosmetic applications. In the field of perfume, the proportion of dipropylene glycol is more than 50%; In some other applications, the proportion of dipropylene glycol is generally less than 10% (by weight). Some of the specific product application areas include: curling lotions, skin cleans (cold creams, body washes, body washes, and skin lotions) deodorants, face, hand, and body skin care products, moisturizing skin care products, and lip balms, among others.
3) Dipropylene glycol can also play a role in unsaturated resins and saturated resins. It produces resins with superior softness. Crack resistance and weather resistance. The long-term yellowing resistance of the product is the value.
Application:
1. Used as liquid ammonia stabilizer in refrigeration equipment, rocket propellant, oxidant in pyrotechnic manufacturing, glass etching agent, antistatic agent, molten salt component in metallurgical industry, etc.
2. Used as analytical reagent, dissolving and cooling agent, also used in the manufacture of phosphor.
3. Used in ceramics. Fireworks manufacturing. Molten salt bath. Rocket propellant. freezer. Analysis reagents.
4. Used in the manufacture of phosphors, heat exchange carriers, and other lithium salts.
5. Used as liquid ammonia stabilizer, molten salt component, etc.
6. Mainly used in the electroplating industry, used to make nickel batteries, organic synthesis and production of hardened oil as a catalyst for paint, make other nickel salt raw materials, used for metal coloring, and vat dye mordant.
Sodium dodecyl sulfate is a kind of anionic surfactant, belongs to the typical representative of sulfuric acid ester surfactant, SDS for short, also known AS, K12, coconut oil, alcohol, sodium sulfate, lauryl sodium sulfate, foaming agent, sales of the commodity on the market are usually white to light yellow crystalline powder, non-toxic, slightly soluble in alcohol, insoluble in chloro-form, ether, soluble in water, with anionic and non-ionic complex compatibility is good, It has good emulsification, foaming, foaming, penetration, decontamination and dispersion properties, rich foam, rapid biodegradation, but the degree of water solubility is inferior to the fatty alcohol polyoxyethylene ether sodium sulfate (AES).
Sodium dodecyl sulfate is the main component of dishwashing liquid. It is often used during DNA extraction to denature proteins and separate them from DNA.
Product Name: LITHIUM IRON PHOSPHATE CARBON COATED
CAS NO.:15365-14-7
Appearance: Black Powder
Purity:99%
Melting Point:>300 �°C
Application
Due to the inherent structural stability of lithium iron phosphate, especially its unparalleled advantages in safety and cycling performance, batteries using lithium iron phosphate cathode materials can be widely used in multiple fields.
Methyl tert-butyl ether (MTBE) is a colorless, transparent, low-viscosity, volatile liquid with a distinctive odor and an oxygen content of 18.2%.
lts vapor is heavier than air. Diffuses along the ground and burns when co-existing with strong oxidants.
The main use of methyl tert-butyl ether is as an organic solvent and can also be used as a gasoline additive to make it more antiknock.
Application
ethyl tert-butyl ether (MTBE) is mainly used as gasoline additive, has excellent knock resistance, improves octane number, and can also be cracked to produce isobutene has good miscibility with gasoline, less water absorption, no pollution to the environment, can be improved as an analytical solvent, extractant, in chromatography especially high pressure liquid chromatography as a removal agent, and some polar solvents such as water, methanol, ethanol and other azeotrope formation. Mtbe also has a mild narcotic effect. Ethyl tert-butyl ether (MTBE) is mainly used as gasoline additive, has excellent knock resistance, improves octane number, and can also be cracked to produce isobutene has good miscibility with gasoline, less water absorption, no pollution to the environment, can be improved as an analytical solvent, extractant, in chromatography especially high pressure liquid chromatography as a removal agent, and some polar solvents such as water, methanol, ethanol and other azeotrope formation. Mtbe also has a mild narcotic effect.
Trichloroisocyanuric acid disinfection performance is excellent, is a new generation of broad spectrum, high efficiency, low toxicity fungicide, bleach and shrink resistant agent. Mainly used for drinking water, industrial water recycling, swimming pools, restaurants, hotels, public places, families, hospitals, and prevention of fish disease, poultry eggs and other disinfection and sterilization. It can kill almost all fungi, bacteria, viruses and spores.
Uses :
It mainly applied to electroplating without cyanate, industrial or household detergents; It can used as a buffering reagent as well as stabilizer for hydrogen peroxide; It can also be used as dispersion agent for ceramic, clay, latex and pigments etc.
Sodium Silicate, also known as water glass, it has two forms: liquid and solid.The liquid is common, colorless clear or light gray deup. The solid is light blue or light green crystals, transparent or semi-transparent .Sodium Silicate is made from sodium oxide and silicon dioxide.
Application:
1. Chemicals: Raw material for the manufacture of amorphous silica, silica gel, molecular screens and white fillers.
2. Detergents: Additive for alkalinity control and corrosion inhabition.
3. Textiles:
(1)Stabilizer in bleaching with hydrogen-peroxide.
(2)Metal sequestering agent.
(3)PH regulator.
4. Paper:
(1)Adhesive for corrugated cardboard.
(2)Stabilizer in bleaching with hydrogen-peroxide.
5. Foundry: Binder of molding sands.
6. Mining: Additive for mineral pelletizing.
7. Construction: Floor consolidation.
8. Welding: Binder in manufacture of rods.
9. Metallurgy and Refractory: Materials Setting accelerator for cement and refractories curing ( gunited)
Benzalkonium chloride is a cationic surfactant, a non-oxidizing bactericide, with a broad spectrum and efficient bactericidal and algicidal ability, which can effectively control the proliferation of bacteria and algae in water and the growth of slime, and has good slime stripping and certain dispersion and penetration, and has certain oil removal, deodorization and corrosion inhibition.
12815 Industrial Chemicals Suppliers
Short on time? Let Industrial Chemicals sellers contact you.
