Calcium hydroxide is white powder. Chemical formula Ca (OH) 2, commonly known as slaked lime, slaked lime, water solution known as clarifying water. Is a white powder solid, slightly soluble in water. Alkali calcium hydroxide has continuity, is a strong basein. Calcium hydroxide is two yuan alkali, but slightly soluble in water. Calcium hydroxide is widely used in industry.
Sucrose benzoate is a white to off-white powder. Sucrose benzoate can be used as a plasticizer for solid inks, solid coatings, thermosetting powder coatings and thermal printing toners. Application: It is used as a synthetic chemical raw material, a coating and cosmetic raw material, and as a high-performance rate-modifying additive for high-performance liquid crystal display film optical materials, holographic photosensitive materials, electronic image recording elements, and thermal transfer printing, Magnetic thermal transfer ribbon, electrostatically sprayed toner and thermal printing ink, etc. Different application occasions have corresponding requirements on the average substitution degree of sucrose benzoate and the content of each component in order to achieve a better use effect.
Squalene is a natural 30-carbon organic compound, although plant sources are now used as well, including amaranth seed, rice bran, wheat germ, and olives. Squalene is light yellow to brownish red clear oily liquid,derived from the vegetable oil fatty acid.It is an important biological active substance which can be widely used in cosemetics,foods and other fields.
Hydroxyethy Cellulose (HEC ) .It is a white or light yellow color powder or granule made by cellulose Hydroxyethyl cellulose powder is a non-ionic soluble cellulose ether , easily dispersed and dissolved in both hot and cold water .hec cellulose get a good performance as thickener .Sizing agent. Oil-drilling additives. etc you can find Welldone Hydroxy Ethyl Cellulose widely used in stone like paints, cosmetics, Oil drilling .Textile and food industry.
Surfactant Ammonium Laureth Sulfate CAS 32612-48-9 ALES 70% Lauryl glycol polyether has antifoam properties. Polyether defoamer is a major variety of defoamer at present, which has the advantages of non-toxic, tasteless, non-irritating, resistant to hard water and acid and alkali, and good compatibility with the system. Compared with another class of silicon-containing defoamer, although its defoamer performance is not high, its anti-foam performance is quite excellent.
HPMC is hydroxypropyl methylcellulose is water-soluble, non-ionic polymer that is commonly used as a thickener and water retention agent in a variety of applications- tile adhesives, wall putty, EIFS- the compound forms colloids when dissolved in� water. This non-toxic ingredient is combustible and can react vigorously with oxidizing agents.
Isopropanol (IPA), also known as 2-propanol, is an organic compound with the chemical formula of C3H8O. It is an isomer of n-propanol. It is a colorless transparent liquid with the smell of a mixture of ethanol and acetone. It is soluble in water, alcohol, ether, benzene, chloroform and other organic solvents. Isopropanol is an important chemical product and raw material, It is mainly used in compounding of� dertergent, coatings, pigment etc.
High quality Alkyl Dimthyl Amine Oxide 30% CAS 70592-80-2 Used directly to formulate detergents for household and industry use,used as raw material to produce kinds of detergent, emulsion. 1) Used as efficient emulsifying agent for polymerizing pressure sensitive adhesive. Dosage: 1â?¼0.1% 2) As the main content of highclass detergent and cleaner, it can blench, remove stains and oil and resist static electricity. 3) Used as the antistatic additive with cleaning function for textile oil. 4) Used as efficient antistatic agent for polyester substrate and film base, especially for polyester base cinefilm and filmstrip. Dosage: 0.5% or so. 5) Used as the antistatic agent for polyolefine, polyester and other polymer materials. 6) Used as the antihygroscopic and anticaking additives for powdered chemical products that are easy to absorb moisture and agglomerate. 7) Used as good degreasant for quality leathers.
High quality Alkyl Dimthyl Amine Oxide 30% CAS 70592-80-2 Alkyl Dimthyl Amine Oxide 1. It is fatty tertiary amine oxide, in acid medium was cationic, and in alkaline medium was nonionic. 2. It has excellent thickening, antistatic, soft, decontamination and Increasingfoam performance. 3. For low irritant performance, which not only can effectively reduce the anionic detergent irritant, but also has a bactericidal, Ca-soap dispersion, vulnerability to biological degradation and so on.
Diphenylmethane diisocyanate, or "MDI" for short, is a white to pale yellow molten solid, containing 4,4 '-diphenylmethane diisocyanate, 2,4' -diphenylmethane diisocyanate, 2,2 '-diphenylmethane diisocyanate, and other isomers. Is the aromatics downstream main products, widely used in polyurethane elastomers, synthetic fiber, artificial leather, solvent-free coatings and other polyurethane materials production field.
Anionic polyacrylamide series products are water-soluble linear polymers with high degree of polymerization.2.They are easily soluble in water and almost insoluble in common organic solvents such as benzene, ether, lipids and acetone.3.It combines valuable properties such as flocculant, thickening, shearing ,resistancereducing, dispersive
This product is a non-ionic high efficiency thickener and a naturally derived glucoside product. It is very mild and non-irritating; it has excellent thickening property and is an extremely efficient thickener for surfactant system formulations; it has good compatibility with various surfactant systems and does not reduce the foam height; it has excellent synergy, and has a good compounding and thickening effect with AOS, AES sodium salt, sulfosuccinate salt and amphoteric surfactant, without jelly feeling. It is very suitable for cleaning products, such as hair shampoo, body wash, facial cleansing products, baby shampoo and so on.
INCI: Alkyl Acrylate Crosspolymer Carbomer Carbopol N2 Description: Multi-functional emulsifier, capable of stabilizing and thickening emulsions even at low dosage, Cold process, No need to calculate the HLB value. It can emulsify silicone to create semi-transparent cream. Provides moisturizing and weightless sensory for cream. High viscosity formulation: THEMAX N1 Low viscosity formulation: THEMAX N2 Recommend Dosage: 0.1-0.4% Features: Emulsify a variety of oils and grease Excellent emulsion stability Suitable for a cold mix process
Cosmetic: PVP-K series can be used as film-forming agent, viscosity-enhancing agent, lubricator and adhesive in hair sprays, mouses, hair-fixing gels and colution. They are also useful auxiliary materials in skin-care product, hair-dying reagent, shapoo, lipstick, deodorant, sunscreen and dentifrice. Pharmaceutical: PVP-K30 (pharmaceutical grade) is a kind of new excellent pharmaceutical excipient. It is mainly used as binder for tablet and granule, dissovlving assistant for injection, flow assistant for capsule, dispersant for liquid medicine and pigment, stabilizer for enzyme and heat-sensitive drug, co-precipitant for poorly soluble drugs, lubricator and antitoxic assistant for eye drug. PVP has been used as excipient in more than one hundred drugs. Other Utility: Suspensant, dispersant and emulsifier disinfector Paint and coating Printing ink Textile and dyestuff Building material Paper making TV kinescope Polymer ultra-filtration membrance, micro-filtration membrance Glass fiber