Chinese Industrial And Automotive Suppliers and Manufacturers

Gabion are made of double twisted hexagonal wire mesh. To fill with stones at the river bank or seaside to stop flood, on the mountain prevent rock falling. 1.Gabion materials: hot dipped galvanized wire and Galfan coated wire 2. Gabion mesh wire:2.0mm,2.2mm,2.7mm,3.0mm, 3. Gabion selvage wire :2.4mm,2.7mm,3.4mm,3.9mm 4 Gabion mesh size : 6*8cm, 8*10cm, 10*12cm, 12*15cm 5. Gabion lacing wire : 2.2mm, 5% of gabion weight 6. Gabion Zinc coating : 225-275g/m2 according to EN 10224-2 7. Gabion size : 2X1X0.5m , 2X1X1m, 3X1X1m, 4X2X0.5m, 6X2X0.3m 8. Gabion box Steel according to EN 10218-2 ,Tensile strength between 380N/mm2 and 500N/mm2 Box applications: 1)Control and guide of water or flood 2)Flood bank or guiding bank 3)Preventing of rock breaking 4)Water and soil protection 5)Bridge protection 6)Strengthening structure of soil 7)Protection engineering of seaside area Specification of heavy hexagonal wire mesh Opening (mm) Wire Diameter (mm) PVC Wire Diameter Inside/outside (mm) Max Breadth (m) 60X80 2.0-2.8 2.0/3.0-2.5/3.5 4.3 80X100 2.0-3.2 2.0/3.0-2.8/3.8 4.3 80X120 2.0-3.2 2.0/3.0-2.8/3.8 4.3 100X120 2.0-3.4 2.0/3.0-2.8/3.8 4.3 100X150 2.0-3.4 2.0/3.0-2.8/3.8 4.3 120X150 2.0-4.0 2.0/3.0-3.0/4.0 4.3 Others we can do as your requirement

Steel Grating It is steel bar according to a certain distance and cross arranged and welded into the middle of a square latice with an iron and steel products . bearing bar 25/3mm , 25mm/4mm , 25mm/5mm , 30/3mm , 30/5mm,32/3mm,32/5mm ,40/3mm75/5mm,100/10mm opening 30mm x 32mm , 30mm x 60mm, 30mm x 100mm , 38mm x 100mm , 40mm x 100mm , 50mm x 50mm ,50mm x 100mm etc surface treatment black , hot dip galvanized type plain bar, serrated bar , I shape bar Hot dip galvanized steel grating tolerance The allowed deviation of length is +0/-5mm, while the allowed deviation of width is +/-5 mm. The non-perpendicularity of bearing bar is allowed no more than 10% of width of bearing bar. Cross bar surface should not surpass bearing bar surface 1mm, beginning & end of cross bar should not surpass the end surfaces of two sides of grating 2mm. Features Corrosion resistance, Rust resistance. Anti-slip resistance, Good air circulation. Good drainage performance, Easy to install and uninstall. High strength-to-weight performance,Durable and long lifespan. Applications Steel grating is widely used for work platforms. Catwalks, transportation servicing areas and vehicle steps.

3D welded wire mesh fence system offers security but without an oppressive and intimidating appearance. The mesh is 50x200mm, fully welded at every intersection. The width of the panels suits post centre of approx. 2500mm Welded wire mesh fence is available in a galvanized finish; in addition they can be colour coated in a wide choice of colors. height width thickness size Mesh panel 1.8m 2m/2.5m 4mm/5mm Square post 1.8m/2m 1.5mm 60mm*60mm Peach post 1.8m/2m 1.2mm 50mm*70mm70mm*100mm Round post 1.8m/2m 1.5mm/2mm 48mm/60mm Hole opening 50mm*200mm , 50mm*100mm support leg 300mm Post cap Plastic cap or Steel cap Clamps Plastic clamps or steel clamp Bolts&Nuts According to need Single arm or double arm On request Tension wire or barbed wire On request Concertina razor wire On request Anti-corrosion Folded security fence panels are fully welded and 100% hot dip galvanized offering great strength , protection against corrosion and an incredibly long product life. Easy to install product installation without special accessories the use of propulsion installation , easy to hold grip simple and quick , reduce costs. Safe fashion The Folded panels are electric galvanized and can be powder coated any color to provide you with a stylish , and exceptionally long lasting fence

Welded Wire Mesh Is Made Of High Quality Iron Wire Through Automatic Process And Sophisticated Welding Technique, Laid Horizontally And Vertically, Individually Welded At Every Intersection. The End Products Is Level And Flat With Sturdy Structure. Welded Wire Mesh Is Extensively Used In Industry And Agriculture, Building, Transportation And Mining For All Such Purposes As Poultry Houses, Egg Baskets, Runway Enclosures, Draining Rack, Fruit Drying Screen, Fence. For Finish,We Can Supply The Following Kinds: *Hot-Dipped Galvanised After Welding *Hot-Dipped Galvanised Before Welding *Eletric-Galvanised Aftre Welding *Electric-Galvanised Before Welding *Pvc-Coated *In Stainless Steel Standard Mesh IN ROLL OF 5M,10M,25M,30M AND 45M LONG AND 0.5M-1.8M WIDE MESH Wire Gauge Inch MM (BWG) 1/4*1/4 6.4MM*6.4MM 22, 23, 24-25 3/8*3/8 10.6MM*10.6MM 19, 20, 21, 22 1/2*1/2 12.7MM*12.7MM 16, 17, 18, 19, 20, 21, 22, 23, 24 5/8*5/8 16MM*16MM 18, 19, 20, 21 3/4*3/4 19.1MM*19.1MM 16, 17, 18, 19, 20, 21 1*1 25.4MM*25.4MM 14, 15, 16, 17, 18, 19, 20 Packing: Each Roll Packed By Water Proof Paper Each Roll Shrink Wrapped Other Packing Method May Be Accepted After Confirmation Other Sizes Be Produced After Confirmation

Expanded Metal can serve as a kind of substitute for perforated metal materials and it find most uses as fences,windows decoration,ventilation devices,shelves,racks,cages and some decoration purposes. Standard expanded metal provides a high strength to weight ratio,and is often used to protect machines or people,by stopping a specific size material from entering as a specific area.All Metals such as Stainless Steel Alloys,Aluminum,Titanium,Steel,Cooper,can all be expanded into rhombic opending for various uses including enclosures,support,protection,decoration or filtration. fdasf Specification of expanded metal sheet Item Strand Design sizes Opening sizes Open area (%) Thickness (Inch) Width (Inch) LWD (Inch) SWD (Inch) LWO (Inch) SWO (Inch) 01 0.134 0.150 2.00 0.923 1.562 0.675 67 02 0.092 0.144 2.00 0.923 1.625 0.718 69 03 0.090 0.096 2.00 0.923 1.688 0.76 79 04 0.060 0.101 2.00 0.923 1.75 0.783 78 05 0.090 0.096 1.20 0.500 0.938 0.337 62 06 0.060 0.087 1.20 0.500 0.938 0.372 65 07 0.048 0.088 1.20 0.500 0.938 0.382 65 08 0.036 0.072 1.00 0.500 0.718 0.407 71 09 0.048 0.072 1.00 0.250 0.718 0.146 42 10 0.036 0.072 1.00 0.250 0.718 0.157 42

3D welded wire mesh fence system offers security but without an oppressive and intimidating appearance. The mesh is 50x200mm, fully welded at every intersection. The width of the panels suits post centre of approx. 2500mm Welded wire mesh fence is available in a galvanized finish; in addition they can be colour coated in a wide choice of colors. height width thickness size Mesh panel 1.8m 2m/2.5m 4mm/5mm Square post 1.8m/2m 1.5mm 60mm*60mm Peach post 1.8m/2m 1.2mm 50mm*70mm70mm*100mm Round post 1.8m/2m 1.5mm/2mm 48mm/60mm Hole opening 50mm*200mm , 50mm*100mm support leg 300mm Post cap Plastic cap or Steel cap Clamps Plastic clamps or steel clamp Bolts&Nuts According to need Single arm or double arm On request Tension wire or barbed wire On request Concertina razor wire On request Anti-corrosion Folded security fence panels are fully welded and 100% hot dip galvanized offering great strength , protection against corrosion and an incredibly long product life. Easy to install product installation without special accessories the use of propulsion installation , easy to hold grip simple and quick , reduce costs. Safe fashion The Folded panels are electric galvanized and can be powder coated any color to provide you with a stylish , and exceptionally long lasting fence

Cld rolled ribbed reinforcement meshalso named: reinforcing welded mesh, welded reinforced mesh, reinforcing mesh, reinforcing weld mesh panels, reinforcing mesh, construction reinforcing mesh. Cold rolled ribbed reinforcement mesh assortment:cold-rolled ribbed reinforcing mesh, hot-rolled ribbed reinforcing mesh, the most widely application of cold-rolled ribbed steel mesh; Cold rolled ribbed reinforcement mesh is hot rolled wire rods by the multi-channel cold reducing pressure rib and the elimination of internal stress formed with two or three surfaces on the crescent shaped reinforced. The mesh is welded by the cold ribbed steel net. He in the prestressed concrete is the update to the cold drawn low carbon wire replacement products, substitution reinforced grade i, is a better similar processing of cold drawn steel. Cold rolled ribbed reinforcement mesh material: crb550 cold-rolled ribbed steel bar, crb550 cold drawn round steel bar, hrb400 hot rolled ribbed bar

Stainless Steel Wedge Wire Drain is made of SS304 SS316 material. It has advantages of surface , fast water draining, anti-odor, anti-clogging, easy to maintain and clean etc. Our Wedge Wire Grate are highly and widely accepted by our customers around the world, such as USA, Australia, Canada, Germany, Poland, New Zealand etc. Size Table Profile Wedge Wire: 3mm*4.2mm Profile Wedge Wire Interval: 3mm Support Bar: 3mm*6mm Center Distance of Support Bar: 25mm Frame on Four Sides: 20mm*5mm Length Width Height SS304 within 3m within 40 cm 20 mm SS316 within 3m within 40 cm 20 mm We have stock for wedge wire grate with standard sizes, so you will get the goods on time when you nedd it urgently. Besides, we can also customize them according to customers' requestment. Advantages 1.Drainage fast , always keep the bathroom dry and clean, enhance the level of non-slip surface 2.Increase three dimensional sense of space ,do not use stone to separate dry and wet areas again ,and don't use any other Stainless Steel Linear Drain 3.Save the time of construction, using the drainage of same gradient, construction of simple ,maintain tile integrity and beautiful appearance . 4.Security increased ,it is a trouble free access for some people whose action is inconvenience as it do not need the stone to separate dry and wet areas 5.Beautiful appearance ,to be part of the bathroom , become a kind of elegant decoration Century Woven (BEIJING) Corporation is a professional manufacturer and exporter in china, with more than 15 years experience in manufacturing and exporting stainless steel linear floor drain. We got mature experience from many times of cooperating with bathroom accessories merchant around the world, especially in USA and Australia. We have got water mark certification. We look forward to the opportunity to serving you.

Cld rolled ribbed reinforcement meshalso named: reinforcing welded mesh, welded reinforced mesh, reinforcing mesh, reinforcing weld mesh panels, reinforcing mesh, construction reinforcing mesh. Cold rolled ribbed reinforcement mesh assortment:cold-rolled ribbed reinforcing mesh, hot-rolled ribbed reinforcing mesh, the most widely application of cold-rolled ribbed steel mesh; Cold rolled ribbed reinforcement mesh is hot rolled wire rods by the multi-channel cold reducing pressure rib and the elimination of internal stress formed with two or three surfaces on the crescent shaped reinforced. The mesh is welded by the cold ribbed steel net. He in the prestressed concrete is the update to the cold drawn low carbon wire replacement products, substitution reinforced grade i, is a better similar processing of cold drawn steel. Cold rolled ribbed reinforcement mesh material: crb550 cold-rolled ribbed steel bar, crb550 cold drawn round steel bar, hrb400 hot rolled ribbed bar Cold rolled ribbed reinforcement mesh size:d5,d6,d7,d8,d9,d10,d11,d12,e5,e6,e7,e8,e9,e10,e11,e12

Y series vibrating screen is vibrated by the circling motion, its high efficient screen for filter materials into multiple grade according to the gravel size. For the compact structure and the convenient installation, it is the ideal screening device for prefilter of the feed materials before the primary crushing in the quarry site, it also can be used as separation and filtration solely. Vibrating screen adopts cylinder type eccentric shaft vibrator and partial block to adjust the amplitude. The materiel sieve drip line is long and more sieving specifications. The circular vibrating screen can also be used for production classifying in quarry, mine, construction, electricity, chemical industry,etc. Working principle Y series vibrating screen is mainly composed of screen box, screen mesh, vibrator, damping spring device, bottom frame and so on. The side plate of vibrating screen is made of high quality steel plate.It is connected with the beam and bottom seat of the vibration exciter with high strength bolts or ring slot rivets, and cylinder type eccentric shaft exciter and eccentric block are used to adjust the amplitude. Vibrator is installed on the screen box side plate to drive vibrator eccentric block produce high-speed rotation through v-belt by the motor so that could produce large centrifugal force to stimulate the screen box produce a certain amplitude of circular movement.The material on the screen is subjected to the impulse passed by the screen box on the titled screen surface and produces continuous throwing motion.So particles that are smaller than the screen hole pass through the screen so as to achieve classification when material enters the screen surface. Features & Benefits 1. Vibrating screen YA is of several decks whose moving track is round. 2. The moving track of material is very long; the size of material can be separated into several specifications. 3. It adopts cylinder style inspiring vibrator device and eccentric shaft to adjust. It has the features of reliable structure, strong vibrating generation, high screening efficient, low noise, easy maintenance, safe performance, etc. 4. It is widely used in separating gravel and is also suitable for mining, construction material, transportation, energy, chemical industry and so on.

Plain weave copper wire mesh is commonly used for most of commercial applications and for filtration where high flow rate is required, typical uses include chemical processing, RFI electromagnetic shielding, Faraday cages, Tempest shielding, shielding electromagnetic radiation, insect screen, attic ventilation screen, roof soffit, laboratories, snail control, gardens, fireplace screen.

Material: The hexagonal wire mesh has hexagonal holes of the same size. The material is mainly low carbon steel. According to different surface treatments, hexagonal wire mesh can be divided into two types: galvanized metal wire and PVC coated metal wire. PRODUCTS DESCRIPTION About hexagonal wire mesh The hexagonal wire mesh has hexagonal holes of the same size. The material is mainly low carbon steel. According to different surface treatments, hexagonal wire mesh can be divided into two types: galvanized metal wire and PVC coated metal wire. The wire diameter of the galvanized hexagonal wire mesh is 0.3 mm to 2.0 mm, and the wire diameter of the PVC-coated hexagonal wire mesh is 0.8 mm to 2.6 mm. Hexagonal net has good flexibility and corrosion resistance, and is widely used as a gabion net to protect slopes. According to different applications, hexagonal wire mesh can be divided into chicken wire and slope protection wire (or gabion net), the former has a smaller mesh. Feature: Easy construction, no special techniques Strong corrosion resistance and weather resistance Good stability and not easy collapse Good flexibility to increase the buffer force of objects Easy installation and saving transportation costs A long service life Application: Slope protection Bank protection Stair protection Mountain protection Chicken wire Gabion Package: Chicken wire: in rolls and plastic films. Gabion: in bundles and pallets Varieties of hexagonal wire mesh: Hexagonal wire mesh: hot dipped galvanized after weaving. Hexagonal wire mesh: hot dipped galvanized before weaving Hexagonal wire mesh: electro galvanized after weaving. Hexagonal wire mesh: electro galvanized before weaving. Hexagonal wire mesh: PVC coated. Hexagonal wire mesh: in stainless steel As a professional manufacturer of hexagonal wire mesh,� ANPING Xinghong� has been developing in improving products quality to satisfy customers' needs. Now, our hexagonal wire meshes are exported to more than 20 countries for chicken wire, rabbit netting, rockfall netting, stucco netting, gabion basket and gabion sack. With best quality and reasonable price, our hexagonal wire mesh products gain the trust of customers and are widely recognized by customers. Welcome to contact us! Twist style: Normal twist, Reverse twist Galvanized hexagonal wire mesh in normal twist Mesh size Wire gauge (BWG) inch mm 3/8" 10 32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21 1/2" 13 27, 26, 25, 24, 23, 22, 21, 20 5/8" 16 32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21 3/4" 20 25, 24, 23, 22, 21, 20, 19 1" 25 27, 26, 25, 24, 23, 22, 21, 20, 19, 18 1-1/4" 32 23, 22, 21, 20, 19, 18 1-1/2" 40 23, 22, 21, 20, 19, 18, 17 2" 50 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 2-1/2" 65 21, 20, 19, 18 3" 75 21, 20, 19, 18, 17, 16, 15, 14 4" 100 19, 18, 17, 16, 15, 14

358 fence is made of a strong welded mesh plate with small meshes. It is extremely difficult to penetrate and attack with traditional hand tools. It has the functions of anti-climbing and anti-cutting. PRODUCTS DESCRIPTION 1. Product description of 358 fence 358� fence made from a type of strong welded mesh panel with small mesh opening. It is extremely difficult to penetrate and difficult to attack using conventional hand tools, has the features of anti-climbing and anti-cutting. The fence name 358 fence comes from its panel mesh opening 3" �? 0.5" �? 8 gauge - approximate to 76.2 mm �? 12.7 mm �? 4 mm mesh opening.� It is recommended to use a strong structure and corrosion resistance as a welded metal fence, galvanized after welding, and then PVC coating. 2. 358 fence application 358 fence is a high secure fence, suitable places include: Prison. Military sites. Detention center. Psychiatric hospital. Airport. Bridge. Sub-station. Shipping port. Warehouse. Power plant. Laboratory. Petroleum and chemical facilities guarding. Industrial and commercial property, etc. 3. 358 fence specification Mesh pattern: 76.2 mm (3") �? 12.7 mm (0.5") resistance welded well at each intersec Wire diameter: 4 mm horizontal wire and vertical Wire. Weld strength: range 540-690 N/m2 Surface treatment: 358 mesh fence panels made from galfan wire, then PVC powder coating (min. 100 micron), or PVC powder painting. It provides additional protection and increases the potential life span. Colours: Green RAL 6005, or Black RAL 9005. Installation: Overlapped 75 mm minimum at each post for securing with slotted clamp bars and M8 diameter bolts. Fence Height(M) Panel Size(H*W) Post(H*Size*Thick) Clamp Bar(H*W*Thick) Inter or comer clamp No(PCS) 2 2007mmx2515mm 2700x60x60x2.5mm 2007mmx60x5.00mm 7 or 14 2.4 2400mmx2515mm 3100x60x60x2.5mm 2400mmx60x5.00mm 9 or 18 3 2997mmx2515mm 3800x80x80x2.5mm 2997mmx80x6.00mm 11 or 22 3.3 3302mmx2515mm 4200x80x80x2.5mm 3302mmx80x6.00mm 12 or 24 3.6 3607mmx2515mm 4500x100x60x3.0mm 3607mmx100x7.0mm 13 or 26 3.6 3607mmx2515mm 4500x100x100x3.0mm 3607mmx100x7.00mm 13 or 26 4.2 4204mmx2515mm 5200x100x100x4.0mm 4204mmx100x8.0mm 15 or 30 4.5 4496mmx2515mm 5500x100x100x5.0mm 4496mmx100x8.00mm 16 or 32 5.2 5207mmx2515mm 6200x120x120x5.0mm 5207mmx100x8.00mm 18 or 36 4.Application scenario 5.Anping Xinghong Metal Wire Mesh Co., Ltd.� is a leading 358 fence manufacturer and supplier in China. We provide high-quality and low-cost 358 fence , or contact us to send your customized requirements, we will design and extend suitable for you wire mesh.

Material: The low carbon steel , elec-galvanized steel wire, hot-dip galvanized steel wire, pvc coated wire,stainless steel wire etc. Surface treatment: Elec-galvanized,hot-dip galvanized,pvc coated,powder coating etc. Feature: The structure of this kind of wire mesh is strong, lasting and rust-resistant. Galvanized welded wire mesh is galvanized after welding. Application:They are used in industry and agriculture building, transportation and mining for all such purposes as poultry houses, egg baskets, runway enclosures, draining rack, fruit drying screen, fence.

polyester net/mesh is used to wrap the pipe and tank to release air bubble and make more smooth surface. It is mainly designed for fiberglass reinforced GRP/FRP pipe by continuous filament winding process.

1. Pressure welding Grille Flat steel: The material is Q235A or stainless steel, there are ordinary plane type, non-slip tooth type and section I type. Common specifications are 20*5, 25*5, 25*3, 32*5, 32*5, 40*5, 40*3, 50*5, 65*5, 75*6, 100*8, 100*10 Wait. 2. Pressure welding Grille Crossbar: Round steel, twisted square steel, square steel or hexagonal steel made of Q235A or 304 stainless steel. Twisted square steel is made by drawing and twisting the coil through a square die. Its common specifications are 5*5, 6*6, 8*8mm, etc.

Welded Wire Mesh Panel Surface Treatment: Galvanized and PVC coated aterial: Low-carbon steel wire,galvanized wire, stainless steel wire.   Galvanized Welded Wire Mesh Panel Surface Treatment: Galvanized and PVC coated.   Specification:      Diameter: 0.4-3mm (Roll )     2.0-5.5mm( panels)      Mesh Hole:1/4''--2''(Roll)    2''--4''(Panels)      Mesh length:15-30m/roll       2-6m/Piece      Mesh Width: 0.7-1.5m (Roll)  

Galvanized Iron Wire Widely used in communication equipment,medical equipment, weaved mesh,brush, tightwire,filter slice, high pressure pipe,architecture, artcraft and so on. Category: Hot dipped galvanized iron wire and Electro galvanized iron wire .   Material: low carbon steel.   Hot-dipped zinc coated:30-60g/m2   Electro zinc coated:8-15g/m2   Use: Widely used in communication equipment,medical equipment, weaved mesh,brush, tightwire,filter slice, high pressure pipe,architecture, artcraft and so on.   Processing: Wire drawing, acid washing, and rust removing, annealing and coiling.   Normal weight:Generally in 25kgs/roll,50kgs/roll,100kgs/roll,also can be customized .   Specification:    Wire diameter: 0.2mm-4.06mm,   Wire gauge: 0.711mm-4.19mm.   Hebei Hengjiaxin Fiberglass Manufacturer Co.,Ltd. Stainless Steel Insect Screen is widely used in resident and various commercial buildings. We can also supply Nylon material, if you are interested in our Folding Insect Screen, you can call us at any time.