1. Chopped basalt fiber Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete. 2. Characteristics of chopped basalt fibers (1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability. (2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete. 2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion. The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise.. (2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Stainless Steel Wire Mesh, Perforated Metal, Expanded Metal, Galvanized Square Mesh, Window Screen, Crimped Screen, Fences, Chain Link Mesh, Barbed Wire, Razor Barbed Wire, Filed Fence, Welded Wire Mesh, Hexagonal Wire Netting, Fiberglass Wire Mesh.
New City Creative's corten steel tree grate products fully comply with ASTM A48, ADAAG and municipal standards. Protect trees throughout their life cycle with many expandable tree opening grill designs. We offer the widest range of products on the market, ensuring that specifiers' needs are met. We will also customize products when you have unique requirements for your project.
Hexagonal wire mesh is firm in structure and has flat surface. If is estensively used in building as reinforcement of the roof and floor. It is also used as fence for poultry cage, fishgarden and children playground.
Glass Fiber + Resin System Process Technique: Hand lay-up, L-RTM, SMC, etc Type: Polyester FRP Fiber Type: GFRP OEM: with OEM Service Technical Strength: 1) Concept Design 2) Material selection 3) Process determination 4) Model processing 5) Mold design 6) Reverse Engineering Main Advantages: 1) light weight and strong 2) corrosion resistant 3) insulation for heat & electric & sound 4) thermal & electric non-conductivity 5) good resistant to low temperature 6) long service life( the service is more than 20 years) 7) water proof&fire proof 8) enviroment friendliness
Specification Size : as clients Aperture : 3mm - big Wire Diameter : according to aperture Strip Material : Polyurethane or Strip Width : 1.5cm - big Strip Thickness : 8mm - big Strips Quantity : as client's requests Description Self-cleaning screens are a non-blinding, high quality screening surface that provides accurate screening and sizing. Having many advantages over other screen types, self cleaning mesh gives higher production rates while eliminating the problem of Large unwanted flat material that contaminates the finished product. We also can add some pu strips on the bars, it will be more wearproof to improve the life. Advantage: Anti-clogging Anti-pegging Increased wear life Accurate sizing Available to suit all types of mobile and static screens With high quality, non-blinding screening surface the Flexi-Harp is the perfect mesh. The combination of different size wire used in manufacture means that they vibrate at varying frequencies to produce a self-cleaning surface. Due to its flat surface (no knuckles Self-cleaning screens can use a smaller wire diameter than woven wire for some applications. Separates flakes and slivers from finished product while greatly reducing problems like plugging and blinding.
Specification Material : polyurethane coated wire rope Aperture shape :square or rectangular Aperture range : 2mm to big Wire rope diameter range : 1.5mm to big Description Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and huge advantages over traditional screens. The Tufflex screen is made up of two types of ropes welded together. The rope running from hook to hook is a wire rope with a thick polyurethane covering. This rope, with the wire, allows the hooked edge screen to be tensioned like other hooked edge screens, with no modifications to machinery required. The same maintenance procedures of checking the screen tension applies to Tufflex screens. The other rope is made up of a fine synthetic cord, also with thick polyurethane covering, and runs parallel to the hooked edge. For side-tensioned set-ups, this rope acts like rider bars for larger stones to slide down the deck, channelling smaller ones closer to the apertures. This increased stratification improves screening efficiency. With the end-tensioned screens, this rope can be used on top, running in a cross-flow orientation, or positioned underneath the rope with the wire. Features Tufflex is a polyurethane-coated screen media that can be substituted for traditional woven wire screens with minimal adjustment to the screen deck. Available in several combinations of both rope and wire diameter and aperture size, Tufflex offers additional customisation options via partially or fully welded screen cloths. The smooth surface of the polyurethane prevents sticking and blinding, which is further enhanced by the flexibility offered by Tufflexs cloth construction. The Tufflex cloths not only improved the quality but also minimised blinding, improved efficiency and have great wear. this provides the site with longer periods between changeover and less downtime during busy screening periods. The available range of Tufflex screens is extensive, with aperture sizes ranging from 1.5mm to 45mm and square and rectangular aperture shapes, similar to woven wire. The wire rope diameter ranges from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide. The construction varies with either fully or partially welded wires.Sheets of poly can also be welded on for impact protection or enhanced abrasion protection along the hooks.
Forming fabric include: Single layer forming wire, Double layer forming wire, 2.5 layer forming wire, SSB forming fabric, Cresent Former Forming Fabric With many years of experience in production single layer forming fabric, Huatao can supply a wide range of single layer forming fabric. single layer forming fabric can meet many applications, if you need, please get our online timely service about single layer forming fabric. In addition to the product list below, you can also customize your own unique single layer forming fabric according to your specific needs. Paper making felt Feature: 1. High anti-compaction capacity. 2. Extremely high elasticity and recoverability. 3. Strong drainability abd larger void volumn. 4. Long holding time of wear resistance and plastic strength of felt. 5. Smooth felt surface and even pressure distribution. Dryer screen can be classified depending on weaving struction can be devided into WOVEN type and SPIRAL type. Huatao has developed a wide range of spiral dryer screen to meet each client's needs helping to reduce operation cost through energy efficient solutions. Also called as Spiral link dryer fabric or SLDF, spiral dryer screen is assembled with spiral loops linked by a pin yarn inserted in the adjacent holes. Spiral fabrics are widely used in various industries as paper machine dryer screen, drying & conveyor belts, filter cloth or screening media. Excellent materials are adopted to make the spiral fabric to protect against hydrolysis and high temperatures conditions. Depending on the filler wire added to the spiral dryer screen, air permeability range from 100 to 1380 CFM. The selection of dryer screen is depending on the various paper machine parameters such as paper grades, dryer cylinders configuration, dryer cylinder temperatures, air balance in the hood etc. Dryer screen design and materials are also very important.
Product Name: Highly Branched Cyclic Dextrin; HBCD Appearance:Colorless powder (Critical control point) Odor:Odorless Taste:Tasteless (Critical control point) Assay (HBCD content):96% (Critical control point) Soluble:Highly soluble in water,transparent and colorless,(Critical control point) Humidity:Low moisture absorption (
Product Name: Pig bile powder Other Name: PULVIS FELLIS SUIS Appearance: Yellowish-brown to tawny bitter powder Purity: Sodium taurohyodeoxycholate hydrate 2% - 4% CAS Number: 635-65-4
Product Name: Gastric mucin Other Name: MUCIN;MUCIN GASTRIC Appearance: White powder Purity: Mucin 80.0% Viscosity>3.0 Total nitrogenâ?¤10.0% (dried substance) Reducing substances 20.0% (dried substance) CAS Number: 84082-64-4 EINECS number: 282-010-7
Product Name: Pepsin Other Name: Acidic Protease Appearance: White to yellowish powder Purity: 3000~30000 NF.U/g CAS Number: 9001-75-6 EINECS number: 232-629-3
Product Name: Cholic Acid Molecular Formula: C24H40O5 Molecular Weight: 408.57 Appearance: White bitter powder Purity: 80% - 98% CAS Number: 81-25-4 EINECS number: 201-337-8
Product Name: Hydroxypropyl methyl cellulose/Hypromellose Other Name: hpmc powder Molecular Formula: C3H7O Molecular Weight: 59.08708 Appearance: White Powder Purity: 99% CAS NO.: 9004-65-3 EINECS No.: 618-389-6 Supplier: ZHENYIBIO Hydroxypropyl Methyl Cellulose (HPMC) are water soluble polymers derived from cellulose. They are typically used as thickeners, binders, film formers, and water retention agents. They also function as suspension aids, surfactants, lubricants, protective colloids, and emulsifiers. In addition, solutions of these polymers thermally gel.
Product Name: Hydroxypropyl methyl cellulose/Hypromellose Other Name: hpmc powder Molecular Formula: C3H7O Molecular Weight: 59.08708 Appearance: White Powder Purity: 99% CAS NO.: 9004-65-3 EINECS No.: 618-389-6 Supplier: ZHENYIBIO Hydroxypropyl Methyl Cellulose (HPMC) are water soluble polymers derived from cellulose. They are typically used as thickeners, binders, film formers, and water retention agents. They also function as suspension aids, surfactants, lubricants, protective colloids, and emulsifiers. In addition, solutions of these polymers thermally gel.
Product Name: Urolithin A Other Name: Molecular Formula: C13H8O4 Molecular Weight: 228.2 Appearance: Off-white to light grey powder Purity: 98% CAS NO.: 1143-70-0 EINECS No.: 1592732-453-0 Supplier: ZHENYIBIO Urolithin A is a metabolite of ellagic acid. It is produced by the body after you ingest compounds found in particularly high concentration in pomegranates (particularly the bitter components such as the skin and seeds) and can help recycle defective mitochondria. Since it is a metabolite that results from the transformation of the tannins in pomegranate by gut bacteria, it can be classified as a postbiotic.
Product Name: Urolithin B Molecular Formula: C13H8O3 Molecular Weight: 212.2 Appearance: Off-white to light grey powder Purity: 99% CAS NO.: 1139-83-9 Supplier: ZHENYIBIO Urolithin B is an intestinal microbial metabolite of ellagitannis and exhibits potent anti-oxidant and pro-oxidant activies depending on the assay system and conditions. Urolithin B can also display estrogenic and/or anti-estrogenic activity
Product Name: Polydeoxyribonucleotide Other Name: PDRN;Salmon Extract Molecular Formula: C15H31N3O13P2 Molecular Weight: 523.36 Appearance: White powder Purity: 98% CAS NO.: 9007-49-2 Supplier: ZHENYIBIO Polydeoxyribonucleotide (PDRN) is a reliable cell growth active substance and a mixture of DNA. It is extracted from salmon sperm,DNA and derived from controlled purification and sterilization process.
