1. Chopped basalt fiber Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete. 2. Characteristics of chopped basalt fibers (1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability. (2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete. 2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion. The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise.. (2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Steel wire mesh, steel welded mesh.Production
Product Name: Highly Branched Cyclic Dextrin; HBCD Appearance:Colorless powder (Critical control point) Odor:Odorless Taste:Tasteless (Critical control point) Assay (HBCD content):96% (Critical control point) Soluble:Highly soluble in water,transparent and colorless,(Critical control point) Humidity:Low moisture absorption (
Product Name: Pig bile powder Other Name: PULVIS FELLIS SUIS Appearance: Yellowish-brown to tawny bitter powder Purity: Sodium taurohyodeoxycholate hydrate 2% - 4% CAS Number: 635-65-4
Product Name: Gastric mucin Other Name: MUCIN;MUCIN GASTRIC Appearance: White powder Purity: Mucin 80.0% Viscosity>3.0 Total nitrogenâ?¤10.0% (dried substance) Reducing substances 20.0% (dried substance) CAS Number: 84082-64-4 EINECS number: 282-010-7
Product Name: Pepsin Other Name: Acidic Protease Appearance: White to yellowish powder Purity: 3000~30000 NF.U/g CAS Number: 9001-75-6 EINECS number: 232-629-3
Product Name: Cholic Acid Molecular Formula: C24H40O5 Molecular Weight: 408.57 Appearance: White bitter powder Purity: 80% - 98% CAS Number: 81-25-4 EINECS number: 201-337-8
Product Name: Hydroxypropyl methyl cellulose/Hypromellose Other Name: hpmc powder Molecular Formula: C3H7O Molecular Weight: 59.08708 Appearance: White Powder Purity: 99% CAS NO.: 9004-65-3 EINECS No.: 618-389-6 Supplier: ZHENYIBIO Hydroxypropyl Methyl Cellulose (HPMC) are water soluble polymers derived from cellulose. They are typically used as thickeners, binders, film formers, and water retention agents. They also function as suspension aids, surfactants, lubricants, protective colloids, and emulsifiers. In addition, solutions of these polymers thermally gel.
Product Name: Hydroxypropyl methyl cellulose/Hypromellose Other Name: hpmc powder Molecular Formula: C3H7O Molecular Weight: 59.08708 Appearance: White Powder Purity: 99% CAS NO.: 9004-65-3 EINECS No.: 618-389-6 Supplier: ZHENYIBIO Hydroxypropyl Methyl Cellulose (HPMC) are water soluble polymers derived from cellulose. They are typically used as thickeners, binders, film formers, and water retention agents. They also function as suspension aids, surfactants, lubricants, protective colloids, and emulsifiers. In addition, solutions of these polymers thermally gel.
Product Name: Urolithin A Other Name: Molecular Formula: C13H8O4 Molecular Weight: 228.2 Appearance: Off-white to light grey powder Purity: 98% CAS NO.: 1143-70-0 EINECS No.: 1592732-453-0 Supplier: ZHENYIBIO Urolithin A is a metabolite of ellagic acid. It is produced by the body after you ingest compounds found in particularly high concentration in pomegranates (particularly the bitter components such as the skin and seeds) and can help recycle defective mitochondria. Since it is a metabolite that results from the transformation of the tannins in pomegranate by gut bacteria, it can be classified as a postbiotic.
Product Name: Urolithin B Molecular Formula: C13H8O3 Molecular Weight: 212.2 Appearance: Off-white to light grey powder Purity: 99% CAS NO.: 1139-83-9 Supplier: ZHENYIBIO Urolithin B is an intestinal microbial metabolite of ellagitannis and exhibits potent anti-oxidant and pro-oxidant activies depending on the assay system and conditions. Urolithin B can also display estrogenic and/or anti-estrogenic activity
Product Name: Polydeoxyribonucleotide Other Name: PDRN;Salmon Extract Molecular Formula: C15H31N3O13P2 Molecular Weight: 523.36 Appearance: White powder Purity: 98% CAS NO.: 9007-49-2 Supplier: ZHENYIBIO Polydeoxyribonucleotide (PDRN) is a reliable cell growth active substance and a mixture of DNA. It is extracted from salmon sperm,DNA and derived from controlled purification and sterilization process.
Product Name: Colloid Microcrystalline Cellulose;Colloid MCC Other Name: microcrystalline cellulose& sodium carboxymethyl cellulose Kinds: MCC+CMC-Na Grade: Food and medical Supplier: ZHENYIBIO In drug, microcrystalline cellulose colloid can be used as suspending agent, emulsion stabilizer, especially in syrup, anti-acid suspending, emulsion, nasal spray and ointmentï¼?In food, it is widely used in dairy products, beverage, bakery products, seasonings and meat productsï¼?In cosmetic, it can be applied in toothpaste, cream, lotion shampoo etc.
Product name: WS 12 Other Name: Cooling agent WS12 Kinds: WS-23, WS-3, WS-5, WS-12, WS-10, WS-27 Molecular Formula:C18H27NO2 Molecular Weight: 289.41 Appearance: White to off-white powder Purity: 99% CAS NO.: 68489-09-8 EINECS No.: 256-974-4 Supplier: ZhenYiBio Relative Cooling Strength at First Onset WS-5>WS-12>WS-3>Menthyl acetate>WS-23>Menthyl lactate Cooling Longevity WS-12>WS-5>WS-23>WS-3>Menthyl acetate>Menthyl lactate FUNCTION 1. Continuous and long lasting cooling and refreshing effect, no hot , harsh and stinging sensation of Menthol and/or Peppermint. 2. Heatâ?? Resistance is good below 200 �°C donâ??t reduce the cooling impact, suitable use in bakery and other high temperature processes. 3. Cooling intensity remains in general for 15-30 minutes with no burning compared with Menthol based products it is cooler. 4. Low dosage 30-100 mg/kg has good cooling properties. 5. Compatible with oter flavors and also with other cooling agents.
Product name: Menthoxypropanediol Other Name: WS-10 Kinds: WS-23, WS-3, WS-5, WS-12, WS-10, WS-27 Molecular Formula: C13H26O3 Molecular Weight: 230.34 Appearance: colorless liquid Purity: 99% CAS NO.: 87061-04-9 EINECS No.: 289-296-2 Supplier: ZhenYiBio Relative Cooling Strength at First Onset WS-5>WS-12>WS-3>Menthyl acetate>WS-23>Menthyl lactate Cooling Longevity WS-12>WS-5>WS-23>WS-3>Menthyl acetate>Menthyl lactate Uses Physiological coolant in foods, beverages, tobacco products, toiletries, cosmetics and pharmaceuticals.
Product name: N-Ethyl-p-menthane-3-carboxamide Other Name: WS-3;Cooling agent WS-3 Kinds: WS-23, WS-3, WS-5, WS-12, WS-10, WS-27 Molecular Formula: C13H25NO Molecular Weight: 211.34 Appearance: White to Almost white powder Purity: 99% CAS NO.: 39711-79-0 EINECS No.: 254-599-0 Supplier: ZhenYiBio Relative Cooling Strength at First Onset WS-5>WS-12>WS-3>Menthyl acetate>WS-23>Menthyl lactate Cooling Longevity WS-12>WS-5>WS-23>WS-3>Menthyl acetate>Menthyl lactate N-ethyl-p-menthane-3-carboxamide is an odorless white, crystalline solid. The compound has a strong and clear physiological cooling effect and is used mainly in oral care products.
Product Name: BROMOCHLOROACETIC ACID Other Name: Branched Chain Amino Acid; BCAA Molecular Formula: C2H2BrClO2 Molecular Weight: 173.39 Appearance: White powder Purity: 98% Kinds: L-Leucine:L-Valine:L-Isoleucine(2:1:1); L-Leucine:L-Valine:L-Isoleucine(1:1:1) CAS Number: 5589-96-8 EINECS number: 627-754-9 Supplier: ZHENYIBIO BCAA means that�±-C has Neutral amino acids of branch fat hydrocarbon chains. BCAA includes L-Leucien, L-Isoleucine, L-Valine. Ther are all belong to essential amino-acid. It mainly used in skeletal muscle Metabolism, and occupies about 35% of skeletal muscle protein. It has serious link with the synthetize of skeletal muscle. Through some function to realize three main materials transform(saccharides, fat and protein)
Product Name: Indole-3-Carbinol Molecular Formula: C9H9NO Molecular Weight: 147.17 Appearance: Off-white to yellow-orange Purity: 99% CAS NO.: 700-06-1 EINECS No.: 211-836-2 Supplier: ZHENYIBIO Indole-3-carbinol is an off-white powder. It is soluble in organic solvents such as benzene, ethanol, DMSO, and dimethyl formamide (DMF), which should be purged with an inert gas. The solubility of Indole-3-carbinol in ethanol and DMF is approximately 10 mg/ml and approximately 3 mg/ml in DMSO. Indole-3-carbinol is an unstable compound that undergoes rapid oligomerization in acid pH environments, like the stomach. Indole-3-carbinol is produced by members of the family Cruciferae, and particularly members of the genus Brassica (e.g., cabbage, radishes, cauliflower, broccoli, Brussels sprouts, and daikon).
