Appearance: White or yellowish-white powder
Active Ingredient Content (%)97.0
Paint and coating dry film anti-corrosion and bactericidal agent, mainly used in plastics, leather, paints, coatings, wastewater, papermaking, wood, textiles, printing and dyeing, ship anti-fouling for corrosion, mold, and algae prevention. Also usable in adhesives and inks.
Tetrakis(hydroxymethyl)phosphonium chloride (THPC) is an organophosphorus compound with the chemical formula [P(CH2OH)4]Cl. The cation P(CH2OH)4+ is four-coordinate, as is typical for phosphonium salts. THPC has applications as a precursor to fire-retardant materials.
It is used for textile post-treatment, as a flame retardant for plastics and paper products, and also for organic synthesis
Physical and chemical properties CAS NO:67-48-1 Structural formula: HOCH2CH2N (CH3) 3Cl Molecular formula: C5H14ClNO Molecular weight: 139.63 Content (%): 50%, 60%, 98% Melting point (�ºC): 302 ~ 305 (decomposition) Toxicity LD50 (mg/kg): rat, 6640 by mouth character White hygroscopic crystal, tasteless, with fishy smell. Mp240�ºC. 10% aqueous solution pH5-6, unstable in alkaline solution. Solubility: easily soluble in water and alcohols, almost neutral in water solution, insoluble in ether, petroleum ether, benzene and carbon disulfide. Slightly fishy, salty and bitter, easy to deliquescence, unstable in alkaline solution.
Choline chloride is an organic substance with the chemical formula of C5H14ClNO. It is a white hygroscopic crystal, tasteless, and has a fishy smell. The melting point is 305 �ºC. 10% aqueous solution pH5-6, unstable in alkaline solution. This product is easily soluble in water and ethanol, but insoluble in ether, petroleum ether, benzene and carbon disulfide. Low toxicity, LD50 (rat, oral) 3400 mg/kg. It is used to treat fatty liver and liver cirrhosis. It can also be used as a feed additive for livestock, which can stimulate the ovary to produce more eggs, litter and gain weight of livestock and fish.
Isopropyl palmitate is an fatty acid ester. Isopropyl palmitate can be used for design and characterization of bioactive bilayer films. The bilayer membrane not only has the ability to scavenge free radicals and inhibit lipid peroxidation, but also can inhibit the growth of known foodborne pathogens. Isopropyl palmitate can be used as an excipient, such as lubricant, oily carrier, solvent, controlled-release transdermal film. Pharmaceutical excipients, or pharmaceutical auxiliaries, refer to other chemical substances used in the pharmaceutical process other than pharmaceutical ingredients. Pharmaceutical excipients generally refer to inactive ingredients in pharmaceutical preparations, which can improve the stability, solubility and processability of pharmaceutical preparations. Pharmaceutical excipients also affect the absorption, distribution, metabolism, and elimination (ADME) processes of co-administered drugs
183745 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
Introduction:Ã?Â
Benzoic acid, C12-15-alkyl esters can be widely used in various creams, sunscreens and lotions. It can be used in conditioners and conditioning shampoos. It can synergize with active agents to enhance conditioning. Dry hair can be oily but not greasy, making the hair greasy. .
Application:
Be used as pharmaceutic aid (vehicle, oleaginous); pharmaceutic aid (emollient) . � This product is very easy to emulsify, can be widely used in various creams, sunscreens and lotions, and can also be used in hair conditioner conditioning shampoos. It can synergize with cationic active agents and enhance conditioning. It can make dry Sexual hair is oily without making it greasy.
Pine oil is a mixture of terpene alcohols and terpene hydrocarbons. Thanks to its pleasant pine smell, notable antimicrobial power and excellent solvency, pine oil is mainly applied in the production of household detergent, flooring gel, industrial cleaner, high quality ink and paint solvent, low concentration ones can be used as foaming agent in ore flotation.
It is used in the food industry for its desired physical properties such as viscosity, boiling point, melting point, freezing point, viscosity and sweetness. It is used in various food products such as baked goods, candies, ice creams, dairy products, cereal products and alcoholic beverages.
Product Name: 2-Phosphonobutane -1,2,4-Tricarboxylic Acid(PBTCA) 50%
Synonyms : PBTCA 50%
M.F.: C7H11O9PCAS No.: 37971-36-1
Performance
Water Treatment chemical PBTCA, a good corrosion inhibitors, is widely used in circulating cool water system and oilfield water injection system antifouling treatment.
Water Treatment chemical PBTCA is used as a corrosion inhibitor for industrial water treatment. This product has excellent complexing ability with Ca2 +, Zn2 +, Cu2 +, Mg2 +.
The suitable PH range is from 7.0 to 9.5. It can operate at high temperature, high hardness, and high alkalinity conditions.
It allows coolingwater concentration factor increased to seven or more.
Sodium butyl xanthoxanthate is a flotation reagent with strong collecting ability. It is widely used in the mixed flotation of various non-ferrous sulfide ores. The product is especially suitable for the flotation of chalcopyrite, sphalerite and pyrite. Under certain conditions, it can be used to preferentially flotation copper sulfide from iron sulfide ore, and it can also be used to collect sphalerite activated by copper sulfate.
Description: Multi-functional emulsifier, capable of stabilizing and thickening emulsions even at low dosage, Cold process, No need to calculate the HLB value. It can emulsify silicone to create semi-transparent cream. Provides moisturizing and weightless sensory for cream.
High viscosity formulation: THEMAX N1
Low viscosity formulation: THEMAX N2
Recommend Dosage: 0.1-0.4%
Features:
Emulsify a variety of oils and grease
Excellent emulsion stability
Suitable for a cold mix process
This product is a non-ionic high efficiency thickener and a naturally derived glucoside product. It is very mild and non-irritating; it has excellent thickening property and is an extremely efficient thickener for surfactant system formulations; it has good compatibility with various surfactant systems and does not reduce the foam height; it has excellent synergy, and has a good compounding and thickening effect with AOS, AES sodium salt, sulfosuccinate salt and amphoteric surfactant, without jelly feeling. It is very suitable for cleaning products, such as hair shampoo, body wash, facial cleansing products,
baby shampoo and so on.
Anionic polyacrylamide series products are water-soluble linear polymers with high degree of polymerization.2.They are easily soluble in water and almost insoluble in common organic solvents such as benzene, ether, lipids and acetone.3.It combines valuable properties such as flocculant, thickening, shearing ,resistancereducing, dispersive
Diphenylmethane diisocyanate, or "MDI" for short, is a white to pale yellow molten solid, containing 4,4 '-diphenylmethane
diisocyanate, 2,4' -diphenylmethane diisocyanate, 2,2 '-diphenylmethane diisocyanate, and other isomers. Is the aromatics
downstream main products, widely used in polyurethane elastomers, synthetic fiber, artificial leather, solvent-free coatings and other polyurethane materials production field.
HPMC is hydroxypropyl methylcellulose is water-soluble, non-ionic polymer that is commonly used as a thickener and water retention agent in a variety of applications- tile adhesives, wall putty, EIFS- the compound forms colloids when dissolved in� water. This non-toxic ingredient is combustible and can react vigorously with oxidizing agents.
Calcium hydroxide is white powder. Chemical formula Ca (OH) 2, commonly known as slaked lime, slaked lime, water solution known as clarifying water. Is a white powder solid, slightly soluble in water. Alkali calcium hydroxide has continuity, is a strong basein. Calcium hydroxide is two yuan alkali, but slightly soluble in water. Calcium hydroxide is widely used in industry.
Classification Aluminum oxide CAS 1344-28-1
another name Aluminum oxide
chemical formula Al2O3
EINECS 215-691-6
Grade Standard Medicine Grade, Reagent Grade
concentration 99%
appearance White amorphous powdery substance
use Functional ceramics, electronic ceramics
Product name Aluminum oxide
Product appearance White amorphous powdery substance
chemical formula Al2O3
molecular weight 101.961
CAS number 1344-28-1
EINECS 215-691-6
melting point 2050
Application Water treatment
CAS 52255-49-9
Appearance: colorless to light yellow, transparent to viscous liquid.
Solubility: soluble in water, insoluble in toluene, isopropanol and ethanol.
Properties and main functions:
1. Capatible with alkylaryl suphates and other sulfonated, sulfated, anionic and non-ionic surfactants.
2. Buffering pH to reduce the stimulation to skin, acting efficiently in a pH zone greater than 7.
3. Reducing the consumption of water and energy during processing in slurry preparation of low viscosity and high solids content, improving the efficiency of the detergent spray dry plant by reducing caking and blockages.
4. Improving shape, glossiness & hardness of sprayed particles, reducing the quantity of fine powder.
5. Scattering dirt and preventing re-deposition, inhibiting the growth of CaCO3 in the washing liquid.
6. Stable to the changes of temperature, no precipitant.
183745 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
