1. Chopped basalt fiber Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete. 2. Characteristics of chopped basalt fibers (1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability. (2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete. 2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion. The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise.. (2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Lan cable, optic fiber cable, power cable, other chemical.
Led lights, automotive led lights, led working light,jeep light, led strips,neon lights and other electronic products like switches, connectors,harness, usb car charger,fuses and so on..
96A glass furnace silica brick, silica brick, silica sand, quartz sand, silica powder, high alumina brick, fire-clay brick, magnesia brick.96A glass furnace silica brick, silica brick, silica sand, quartz sand, silica powder, high alumina brick, fire-clay brick, magnesia brick
Stainless steel wire mesh, copper wire mesh, crimped wire mesh, knitted wire mesh, wedge wire screen panels & pipes, sieve bend screen & support grid , filter elements & filter media.
Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water. Additional applications include: * Pharmaceutical * Oil & Gas * Drinking water treatment * Groundwater remediation * Wastewater treatment * Pulp & Paper * Brewery & Winery * Dechlorination/chloramine reduction * Removal of organic contaminants * Taste and odor reduction * Disinfection-by-product (DBP) removal
Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water. Additional applications include: * Pharmaceutical * Oil & Gas * Drinking water treatment * Groundwater remediation * Wastewater treatment * Pulp & Paper * Brewery & Winery * Dechlorination/chloramine reduction * Removal of organic contaminants * Taste and odor reduction * Disinfection-by-product (DBP) removal
Appearance: brown viscous liquid Characteristics: 1. LABSA 96% for detergent 2. The product has the action of detergency, moistening, foaming, emulsion, dispersion and brown viscous fluid in appearance with acidity 3. It is non-flammable, quickly dissolved in water, not dissolved in normal organic solvent 4. The product has strong absorbency 5. It would be unclear viscous liquid after absorbed water Main indexes: Index Standard Appearance Brown viscous liquid Active content by wt % 96 min Free oil by wt % 1.5 max Sulfuric acid by wt % 1.5 max Color (Klett) Hazen (50g/L water sol.) 35 max Main Application 1. Hair shampoo, bath shampoo, dish detergents and complex soap, laundry powder, dishware cleaner in daily chemical industrial 2. Wetting and clearer , dyeing assistant in textile industry 3. Degrease agent in electroplate and leather manufacture 4. De-inking agent in paper making
1. Chemical Name: Glycerol 2. Molecular Formula: C3H8O3 3. Molecular Weight: 92.09 4. CAS: 56-81-5 5. Packing: 25kg/drum,250kg/drum 6. Storage & Transportation: It should be stored in a dry and ventilative warehouse, kept away from heat and moisture during transportation, unloaded with care so as to avoid damage. Furthermore, it must be stored separately from poisonous subst. Application 1. Used for manufacturing alkyd and epoxy resins. 2. In medicine, it is used to prepare various preparations, solvents, hygroscopics, antifreeze, and sweeteners, and to prepare external ointments or suppositories. 3. Used in the paint industry to produce various alkyd resins, polyester resins, glycidyl ethers, and epoxy resins. 4. Used in the textile and printing and dyeing industries to produce lubricants, hygroscopics, fabric anti shrink treatment agents, dispersants, and penetrating agents. 5. Used as a sweetener, moisture absorber, and solvent in the food industry for cigarettes. 6. It has a wide range of applications in industries such as papermaking, cosmetics, leather making, photography, printing, metal processing, electrical materials, and rubber. 7. And used as fuel for automobiles and airplanes, as well as antifreeze in oil fields. 8. Glycerin can be used as a plasticizer in the new ceramic industry.
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
Product Name: Sodium Lauryl Ether Sulphate 70% (SLES 70%) Origin: China CAS No.: 68585-34-2 AUCO No.: 988 Packing: 170kg drum" Items Standard Appearance white or light yellow gel cream Active matter content 70�?�±2 "Unsulfated matter content % (Contract to 100% active matter)" 3.0 Max "Inorganic sulfate content % (Contract to 100% active matter)" 2.0 Max Color and luster (5% a.m,Hazen) 20 Max PH value (1% Aq. solution ) 7.0~9.5
Phosphoric Acid Type: Food Additives Origin: China CAS No.: 7664-38-2 AUCO No.: 145 Packing: 35kg drum, 330kg drum, IBC drum
Product Name: Linear Alkylbenzene Sulphonic Acid (LABSA) Type: Cosmetic raw materials Origin: China CAS No.: 27176-87-0 AUCO No.: 409 Packing: 210kg drum Items Standard Appearance Brown viscous liquid Colour and lustre(KLETT) 50 Active substance, % 96.5 Free sulfuric acid, % 1.5 Free oil, % 2.0
Specification: Width: 760mm Thickness: 20-40microns Inner Hole Diameter: 76mm Color and Pattern: Customized
Product Name: Linear Alkylbenzene Sulphonic Acid (LABSA) Type: Cosmetic raw materials Origin: China CAS No.: 27176-87-0 AUCO No.: 409 Packing: 210kg drum Items Standard Appearance Brown viscous liquid Colour and lustre(KLETT) 50 Active substance, % 96.5 Free sulfuric acid, % 1.5 Free oil, % 2.0
Product Name: Sodium Lauryl Ether Sulphate 70% (SLES 70%) Origin: China CAS No.: 68585-34-2 AUCO No.: 988 Packing: 170kg drum" Items Standard Appearance white or light yellow gel cream Active matter content 70±2 "Unsulfated matter content % (Contract to 100% active matter)" 3.0 Max "Inorganic sulfate content % (Contract to 100% active matter)" 2.0 Max Color and luster (5% a.m,Hazen) 20 Max PH value (1% Aq. solution ) 7.0~9.5
Product Name: Sodium Bicarbonate "Type: Food/Feed Additives Origin: China CAS No.: 144-55-8 AUCO No.: 195 Packing: 25kg bag" Items Standard "TOTAL ALKALINITY CONTENT (AS NaHCO3)" 99% MIN CHLORIDE (Cl) 0.4% MAX ARSENIC 0.0001% MAX HEAVY METALS (Pb) 0.0005% MAX LOSS ON DRYING 0.20% MAX PH VALUE 8.5 MAX AMMONIUM SALT (NH4) PASS CLARITY PASS WHITENESS 85 MIN
Product Name: Phosphoric Acid "Type: Food Additives Origin: China CAS No.: 7664-38-2 AUCO No.: 145 Packing: 35kg drum, 330kg drum, IBC" Items Standard Description: Clear, Colourless, Odourless, Viscous liquid Purity Min 85% Solubility: Miscible with water and with ethanol Test for acid Strong acid(even at high dilution) Nitrates Max 5ppm Volatile Acids (as acetic acid ) Max 10ppm Chlorides Max 200ppm (as chlorine) Sulfates Max 0.15% Fluoride Max 10ppm Arsenic Max 3ppm Lead Max 4ppm Heavy metals(as Pb) Max 10ppm
