Place of Origin China Type Syntheses Material Intermediates MF C10H14O2 Application Organic intermediate Appearance Crystal powder Product name 5butylbenzene13diol Keyword CAS 46113762 Melting point 815825 C Boiling point 151152 C Density 1092 006 gcm3 Predicted MF C10H14O2 MW 16622 Sample available
This product is one of the few kinds of antioxidant, which is non-toxic, tasteless, light colored. Widely apply in each kind of elastomer. It can be used in polyethylene, polypropylene, polyvinyl chloride and other plastic masterbatch. It may use as the urethane foam as well as the electric wire, the electric cable, packaging material for food, the adhesive antioxidant, especially for heat-resisting , lightfastness, ageing resistance in the neoprene colored cable sheath, antioxidant KY-445 is are remarkable. It can use as lightfastness and ageing resistance antioxidant in the polyether and foam, and also as lubricant antioxidant. It's specially effective to protect neoprene, polyacrylate rubber, polyether polyol and so on from ageing resistance because of high fever, light and some other factors. It has good cooperative effect with the sulf-antioxidant.
Product Description Phenolphthalein appears as white or yellowish-white to pale orange fine crystalline powder. Odorless. Aqueous solution is acidic. Colorless to pH 8.5; pink to deep-red above pH 9. Colorless in presence of large amounts of alkali. Tasteless.Phenolphthalein is an organic compound used as a laboratory reagent and pH indicator. Phenolphthalein exerts laxative effects by stimulating the intestinal mucosa and constricting smooth muscles. However, phenolphthalein is no longer used as a laxative due to the suspected carcinogenicity of this compound.
Stearyl alcohol cas 112-92-5 basic information Product Name: 1-Octadecanol CAS: 112-92-5 MF: C18H38O MW: 270.49 EINECS: 204-017-6 Stearyl alcohol is white flakes or granules.Stearyl alcohol can also be called 1-Octadecanol and Octadecanol .The Melting point is 59.4-59.8�ºC Stearyl alcohol / Octadecanol / 1-Octadecanol cas 112-92-5 Application Used in the manufacture of surfactants
2-amino-2-methyl-1-propanol appears as a white crystalline block or colorless liquid. The melting point is 30-31�ºC, the boiling point is 165�ºC, 67.4 (0.133kPa), the relative density is 0.934 (20/20�ºC), and the refractive index is 1.449 (20�ºC). It is miscible with water and soluble in alcohol Used for the synthesis of surfactants, vulcanization accelerators, acid gas absorbers. Derivatives formed with carboxylic acid compounds are used for gas chromatography analysis. Carbonyl protective reagent. Synthesis of 2,2, 2-1-2-methylazopropyl (a very useful intermediate) with high yield. The only highly effective precipitator of levopimaric acid in pine vinegar. It is an organic base used as a neutralizer and is generally used as a resin neutralizer in cosmetics. 2-amino-2-methyl-1-propanol is mainly used as a biostabilizer and pH stabilizer in the field of metal processing. The product is widely used in Europe and the United States for the concentration and post-treatment of metal processing fluids, and is the main raw material for the development of biostable formulations. It is used to increase and stabilize pH value in field replenishment to save and extend the life of metal working fluid. The product also has the advantages of anti-cobalt precipitation, low foam and so on. For the synthesis of surfactants; Vulcanization accelerator; Acid gas absorbent.
Chemical Propeties: 1.Heat and cold resistant, can work between -50C~+200C in the long run. 2.Viscosity ranging from 5-5 million cs, also insignificant temperature dependence of viscosity. 3.Excellent insulation performance, good water repellent and moisture resistant. 4.Good chemical stability,high resistance to weathering and oxidation conditions. 5.Inert, odorless, tasteless, stainless, and therefore ideal for medical and food applications. 6.Low surface tension, high flash point, low freezing point. Application: 1.Lubricant for rubber, plastic bearing, gear, also for reducing the friction 2.Release agent for plastic forming process, rubber process, metal cast, making paper, etc. 3.Material for making defoamer 4. Surface treating agent for glasses, ceramics, metals 5.Additive agent for paint, rubber, paraffin, resin, etc. 6.Medical defoamer for artificial heart-lung machine and basic pharmaceutics to treating pulmonary edema. 7.Insulating, dustproof and mildewproof coating on glassed, ceramics 8.Finishing agent for textile 9.Basic material of cosmetics, skin care products, hairdressing products 10.Softening agent, water repellent, hand modifier for textile and leather 11.Hydraulic oil, especially in aircraft 12.Material of shaving cream, toothpaste, soap powder, washing powder 13.Heat transfer fluid
N,N-Dimethylaniline DMA CAS 121-69-7 is an organic chemical compound, a substituted derivative of aniline. It consists of tertiary amine, featuring dimethylamino group attached to a phenyl group. It is an important precursor to dyes such ascrystal violet. N,N-Dimethylaniline is yellow to brown colored oily liquid with a fishlike odor. Less dense than water and insoluble in water. Flash point 150�°F. Toxic by ingestion, inhalation, and skin absorption. Used to make dyes and as a solvent. Specification Appearance Colorless to pale yellow oil liquid Assay â?¥99% Aniline assay â?¤0.3% N-methyl aniline â?¤ 0.5% Water and others â?¤ 0.2% Application 1) As dyes intermediate used for the manufacture of vanillin, azo dyes, triphenylmethane dyes etc. As an important intermediate for dyestuff, mainly used in the production of triphenyl methane dyestuff, also as solvent, antiseptic for metal, solidity for epoxy resin and polyester, and catalytic promoter for polyreaction of ethylene chemical compound. 2) In medical industry, it is used in the production of cephalosporin V, sulfanilamide -6-methoxamine pyrimidine, fluorine pyrimidine. 3) In perfume industry, it is used in the production of vanilla, as well as the vulcanized agent for rubber or the raw material for dynamite and some organic intermediates.
Product Name: 3,4-Ethylenedioxythiophene Synonyms: EDOT;EDT;3,4-ETHYLENEDIOXOTHIOPHENE;3,4-ETHYLENEDIOXYTHIOPHENE;AKOS BBS-00006360;2,3-DIHYDROTHIENO[3,4-B]-1,4-DIOXIN;2,3-DIHYDROTHIENO[3,4-B][1,4]DIOXINE;3,4-ETHYLENEDIOXO THIOPHENE 98+% GC CAS: 126213-50-1 MF: C6H6O2S MW: 142.18 EINECS: Product Categories: Thiophenes;Sulphur Derivatives;Thiophens;Thiophen;fine chemicals, specialty chemicals, intermediates, electronic chemical, organic synthesis, thiophen;fine chemicals, specialty chemicals, intermediates, electronic chemical, organic synthesis, functional materials;EDOT;OLED materials, chemical,electronic;Pharmaceutical intermediates
Glycerine, or glycerol is a simple polyol compound. It is a sweet, colorless, odorless, nontoxic and viscous liquid. It can absorb moisture from air and also can absorb hydrogen sulfide, sulfur dioxide and hydrogen cyanide. It is insoluble in benzene, chloroform, carbon tetrachloride, carbon disulfide, petroleum ether and oil. Application 1 In coating industry, as raw material for manufacturing nitroglycerin, alkyd resin, epoxy resin; 2 In textile and dyeing industry, glycerol is use to produce lubricant, moisture absorbent, anti-shrinkage fabric treatment agent, dispersing agent and penetrating agent; 3 In medicine, glycerol is used to make various preparations, solvent, hygroscopic agent, antifreeze and sweeteners, compounding topical ointment and suppository; 4 In food, it is used as sweetener and in tobacco, glycerol is used as moisture absorbent and solvents; 5 Glycerol is also widely used in paper-making, cosmetics, leather industry, photograph, printing, rubber, etc.
D-calcium pantothenate is a white powder, no smelly odor, tastes a little bitter, has hydroscopic property. Its aqueous solution shows neutrality or slightly alkaline, easy to dissolve in water, slightly solvable in ethanol, almost can not dissolve in chloroform or aether. Item Index Authentication Positive reaction Calcium content ,(Ca) %(weight on dry product) 8.2-8.6 Nitrogen content ,(N)%(weight on dry product) 5.7-6.0 specific optical rotation, ([a]D20)%(weight on dry product) +25�°-+27.5�° Heavy metal (count on Pb),% â?¤0.002 Loss on drying,% â?¤5.0 Uses:feed additive, food additive, pharmaceutical USP28/BP2003 Packing:25kg/Carton, 25kg/drum Storage:store in cool,shady and dry place. Period of validity:3 years, use it as quickly as possible after unseal
L-tert-Leucine is an essential amino acid making up one third of our muscle protein. L-tert-leucine is important in developing chiral pharmaceutically active chemicals. It can be used as a food additive. It is used in the formation of sterols. It can also be used as the catalyst in the production of cobalt oxazolone palladacycles complex. It can also be used for the production of Chiral tridentate Schiff base ligands. Application: 1. Used as a nutritional supplement, animal feed additive for synthetic drugs 2. Amino acid is an essential component of protein, and one of its main physiological functions is as a raw material for synthetic protein.
Naturally occurring vitamin E refers to a family of fat soluble molecules which include tocopherols. Natural Vitamin E is formulated to maximize antioxidant protection and provide support for cardiovascular health. The formula includes a blend of mixed tocopherols. Each serving provides 800 IU d-Alpha tocopherol and 400 mg of additional non-alpha tocopherol forms for comprehensive antioxidant protection. Vitamin E with mixed tocopherols is designed to promote antioxidant protection and cardiovascular health. Vitamin E with mixed tocopherols supports cellular respiration of muscles, especially cardiac and skeletal muscles.
Characteristic: 1. Colorless, tasteless, non-toxic, harmless, chemically inert, bright and transparent; 2. Give the product an excellent and noble hand feeling, and feel very thick after use, moisturizing but not greasy; 3. Highly moisturizing and moisturizing; 4. Excellent oxidation resistance and thermal stability; 5. It has good stability in a wide pH range; 6. It is a high-purity hydrocarbon with excellent cost performance; 7. It has good compatibility with mineral oil and most of the raw materials of care products; 8. Used in hair care products to increase brightness and combing feeling; 9. It has anti-wrinkle effect and can be used in anti-wrinkle products; 10. It is conducive to the uniform dispersion of sunscreen in the oil phase, can increase the SPF value, and can be used in sunscreen products; 11. It is non-irritating and non-sensitizing to the skin and is very safe. It is strongly recommended for use in baby care products; 12. It has excellent dispersing effect on powder, and it is recommended to be used in makeup and lipstick formulations. Application: 1. Squalane: strengthens the repair of the epidermis, effectively forms a natural protective film, and helps the balance between the skin and sebum. 2. Squalane is a kind of lipid closest to human sebum. It has strong affinity and can be integrated with human sebum membrane to form a natural barrier on the surface of the skin. 3. Squalane can also inhibit the peroxidation of skin lipids, can effectively penetrate into the skin, and promote the proliferation of skin basal cells, and has obvious physiological effects on delaying skin aging, improving and eliminating chloasma. 4. Squalane can also open skin pores, promote blood microcirculation, increase cell metabolism, and help repair damaged cells.
What is Sodium Alpha Olefin Sulfonate? Sodium Alpha Olefin Sulfonate is an anionic surfactant of Sulfosuccinate. After special treatment, the product has a small odor and good stability, and is easy to use. It has a high Krafft point, its high concentration of aqueous solution at room temperature can form a large number of crystals, so the production of bright pearlescent paste, good spread, paste stability, no thinning, no water, very little affected by temperature. It is the ideal raw material for weak acid paste washing products. Application of Sodium alpha olefin sulfonate (AOS) 1. Irritation is very low, detergency is strong, belongs to mild surfactant. 2. The product is weakly acidic and easy to form paste. Pearl is bright, stable and easy to spread. 3. The foam is rich, delicate, stable, non greasy, very easy to rinse, clean after washing, and not tight. 4. Resistant to hard water and good biodegradability. 5. Excellent washing, emulsifying, dispersing, wetting and solubilizing properties.
1. Used as a paper sizing agent in the papermaking industry to enhance the water resistance and impermeability of paper; 2. After being dissolved in water, it can cause small particles and natural colloidal particles in the water to condense into large flocs, which can be removed from the water. Therefore, it is used as a coagulant for water supply and wastewater; 3. Used as a turbid water purifier, as well as a precipitator, color fixative, filler, etc. Used as a raw material (astringent) for anti sweat cosmetics in cosmetics; 4. In the fire protection industry, foam extinguishing agent is composed of baking soda and foaming agent; 5. Analytical reagent, mordant, tanning agent, oil decolorizing agent, wood preservative; 6. Stabilizers for albumin pasteurization (including liquid or frozen whole eggs, protein or egg yolk); 7. It can be used as raw material to produce artificial gemstones, high-grade ammonium alum and other aluminate; 8. In the fuel industry, it serves as a precipitator in the production of chrome yellow and lake dyes, while also serving as afixing and filling agent.
It is the main raw material for making titanium sponge and titanium chloride. Used as an important component of ethylene polymerization catalysts. It is used in the manufacture of pigments and titanium organic compounds. It is also a good solvent for dissolving various organic substances such as synthetic resins, rubber, and plastics.
Triethylene glycol monomethyl ether is a chemical used in organic synthesis. As a solvent and thinner for printing ink, industrial cleaning agent, coating (nitro fiber paint, varnish, enamel), copper coated plate, printing and dyeing, etc. It can be used as raw materials for chemical products such as pesticide intermediates, pharmaceutical intermediates and synthetic brake fluid. As electrolytes for electrolytic capacitors, chemical fiber dyeing agent for leather, etc. Used as textile auxiliaries, synthetic liquid dyes, chemical fertilizers and desulfurization agents in oil refining.
Introducing our premium-grade chemical compound, 2-(2-Butoxyethoxy) ethanol, also known as Ethylene Glycol Monobutyl Ether or Butyl Cellosolve. This versatile and high-performance solvent is specifically designed to meet the diverse needs of various industries. With its exceptional properties and reliable performance, it has become an indispensable component in numerous applications. 2-(2-Butoxyethoxy) ethanol is a clear, colorless liquid that possesses excellent solvency power, making it an ideal choice for a wide range of applications. Its unique chemical structure allows it to dissolve both polar and non-polar substances, making it highly effective in various formulations. This attribute makes it a preferred choice in industries such as paints and coatings, cleaning products, printing inks, and many more. One of the key advantages of 2-(2-Butoxyethoxy) ethanol is its ability to enhance the performance of other chemicals. It acts as a powerful coalescing agent, aiding in the formation of a uniform film during the drying process. This results in improved adhesion, durability, and overall quality of coatings and paints. Additionally, its low volatility and high boiling point make it an excellent choice for applications that require extended drying times. Furthermore, 2-(2-Butoxyethoxy) ethanol exhibits excellent compatibility with a wide range of resins, polymers, and solvents. This attribute allows for easy formulation and compatibility with existing systems, reducing the need for extensive reformulation. Its versatility extends to applications such as industrial and household cleaners, where it effectively removes grease, oil, and other stubborn stains. Our 2-(2-Butoxyethoxy) ethanol is manufactured using state-of-the-art processes, ensuring consistent quality and purity. We adhere to strict industry standards and regulations to guarantee the highest level of product performance and safety. Our commitment to quality extends to our packaging, which is designed to prevent leakage and ensure convenient handling and storage. In conclusion, 2-(2-Butoxyethoxy) ethanol, also known as Ethylene Glycol Monobutyl Ether or Butyl Cellosolve, is a versatile and high-performance solvent that offers exceptional solvency power and compatibility. Its unique properties make it an indispensable component in various industries, including paints and coatings, cleaning products, printing inks, and more. Choose our premium-grade 2-(2-Butoxyethoxy) ethanol for reliable performance and superior results in your applications.
Application 1.Glycerol monocaprylate is a pure plant-derived glycerol fatty acid ester (medium carbon chain). It has good multi-functional properties such as emulsifying, dispersing, anti-corrosion, moisturizing and stabilization. It is safe, gentle and easy to use. It is a multifunctional moisturizer, fatliquor and preservative. 2. Mainly used as auxiliary emulsifier, emollient, moisturizer, natural preservative in cosmetics (such as cream, lotion, microemulsion, etc.). It can effectively maintain oil and water stability. It is a natural, efficient and safe preservative with better corrosion resistance than glycerol monolaurate. Glyceryl caprylate Packaging and Shipping Packing: 25kg/drum 200kg/drum Glyceryl caprylate Storage This product is non-dangerous. It can be transported and stored according to general chemical materials. It is forbidden to mix with toxic and harmful substances. The product has certain moisture absorption. It should be stored in a sealed way in low temperature, dry, cool and ventilated condition. The shelf life is not open for 24 months.
2-phenoxyethanol is an aromatic ether that is substituted on oxygen by a 2-hydroxyethyl group. It has a role as an antiinfective agent and a central nervous system depressant. It is a primary alcohol, a glycol ether and an aromatic ether. Phenoxyethanol is chemical preservative, a glycol ether often used in dermatological products such as skin creams and sunscreen. It is a colorless oily liquid.