Checking Item Test Standard Sodium oxide(Na2O)% 28.00-30.00 Silica(SiO2)% 27.00-29.00 Water insoluble% 0.2 Fe(ppm) 200ppm Whiteness% 80 Bulk Density 0.80-0.97g/cc PH of 1.0% Solution 12-13 Melting Point 72.2 ParticularSize % (16-30mesh) 90 98
Specifications: Appearance white free-flowing fine granule Granule size 90% min between 0.15-0.85mm NaCl 99 % min Moisture 0.09% max Ca & Mg 0.3% max Water insolubles 0.1% max
Product Name: Ferrous Sulphate Heptahydrate Molecular Formula: FeSO4. 7H2O CAS No.: 7782-63-0 Mol Weight: 278.05 Usage and Dosage: 1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement. 2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation. 3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color. 4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies. Storage: Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems. Precaution: Flammability Non flammable. No fire or explosion hazard exists. Packing: Net weight 25kgs, 50kgs per each plastic woven bag Technical Specification Appearance: Light green crystalline powder Fe 19.7%min Pb 20 ppm max As2 ppm max Cd 5 ppm max Size Crystalline Powder
Specifications Ammonium sulfite % 85 Ammonium bisulfite or ammonium Bicarbonate%1.0 Ammonium Sulfate% 7.0 Appearance White or Light yellow Powder
Commodity: Ammonium nitrate porous prills Molecular formula: NH4NO3 Molecule Weight: 80 CAS: 6484-52-2 UN:1942 Hazardous class:5.1 Commodity: Ammonium nitrate porous prills 1.Production of granular porous ammonium nitrate for industrial use and agricultural granular ammonium nitrate. Products with low moisture content, not easy to cake; high compressive strength, not easy to break; high oil absorption rate. Ammonium nitrate content is more than 99%, the appearance is white granular crystals, no impurities visible to the naked eye. 2. Purpose: Explosive material: granular ammonium oil explosive is made by mixing porous ammonium nitrate with raw oil. Its speed can reach more than 3 200 m/s. This explosive has strong explosive power, safe and reliable use, low price, cost saving, and can usually reduce the cost by 20%-40%. At present, this kind of explosive has been widely used in mining, construction, railway and highway construction, agricultural and water conservancy construction and national defense and other fields. 3. Product specifications: Specifications: Appearance white granule Particle size 0.5-2.5mm NH4NO3 >99.5% N >34% Oil absorption > 8% Moisture < 0.2% PH >4
Commodity: Potassium Permanganate Molecular formula:KMnO4 Molecule Weight:158.03 CAS:7722-64-7 EINECS:231-760-3 UN 1490 Hazard Class: 5.1 Physical State: Needle-like lustrous and dark purple crystal. It can dissolve in water, and it is a strong oxidant. Melting Point :270 C ,decompound Specific Gravity :2.703 ,Solubility in water :6.4 g/100 mL (20C) ,Stability :Stable under ordinary conditions Use Mainly used in medical industry, water treatment, metallurgical industry, chemical industry and food industry. Quality Standard Item Standard BP2000 Appearance purple noodle crystal Purity 99.3% min Chloride 0.01% max Sulfate 0.05% max Insoluble matter in water 0.15% max Moisture 0.5% max As 20 ppm max Cd 50 ppm max Cr 50 ppm max Hg 10 ppm max Pb 50 ppm max Se 50 ppm max Ni 50 ppm max Sb 50 ppm max Packing and Storage Packing: 50kg net weight new galvanized drums with P.E. Liner. Stored in a cool, ventilated, dry place.
1. Product name: Ammonium bisulfite solution 2. Molecular formula: NH4HSO3 3. Molecular weight: 99.10 4. Physical and chemical properties: light yellow liquid, with a little sulfur dioxide odor. Relative density (70%) : 1.4. 5. Technical index: Item Photographic grade Appearance clear light yellow liquid Content w/w % 68-72 pH value (stock solution 20C) 4.0-6.0 Iron (Fe) w/w % 0.001 6. Packing: 270kg plastic drum, 1.25MTS/IBC 7. Uses: in synthesizing dye intermediate, surfactant, herbicide, reducing agent in pharmaceutical industry, etc.
Product Name Sodium Benzoate Specification Food Grade Appearance White Powder/Granular/Sphere Certification FDA, GMP, HACCP, ISO, KOSHER, QS, Halal Purity: 99.5% min [Molecular formula] C7H5NaO2 [Molecular weight] 144.11 [Use] widely used in food industry as Antiseptic, anti-animalcule and antifreezing agent used in food, medicine, tobacco, plating, printing and dyeing [Quality index] in accordance with GB1902-2005 standard for edible grade and BP98 and China national codex 2000 for medicinal grade Package: 25kg net packed in woven bag, or 600kg net packed in ton bag Container: 17MTS/20'FCL without pallets, 14MTS/20'FCL with pallets For extruded, 16MTS/20' container For powder: 17MTS/20' container For granule: 20MTS/20' container Item GB1902-94 version BP98 version China pharmacopoeia 2000 version Content(base on C7H5NaO2 dry basis),% 99.0 99.0-100.5 99.0 Drying loss,% 1.5 2.0 1.5 Dissolve Meet the stipulation Meet the stipulatio Transparency and color / Meet the stipulation Alkalinity acidity; Meet the stipulation Meet the stipulation Meet the stipulation Cchloride (base on Cl) 500PPm 200PPm/ Chloride(base on Cl),/ 300PPm/ Heavy metal(base on Pb) 10PPm 10PPm 10PPm As(base on As),2PPm/ 5PPm Sulfate (base on SO4),1000PPm // Readily oxidizable substance Passed the test/ o-benzene tricarbonic acid Passed the test/
Commodity:Sodium persulfate Molecular Formula : Na2S2O8 Molecular weight : 238.13 Description Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle. Transportation Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505 Water hazards class 1(slight water hazard) All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed. Package (1) In 25kgs net multiple paper bags with one PE bag inner (2) In 25kgs net PE bags (3) In 25kgs net woven bags with two PE bags inner (4) In 1000kgs net big woven bags with one PE bag inner The above package is also with a pallet 1000kgs each. Storage NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect. Application Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc. Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors; cleaning and etching of printed circuits),activation of copper and aluminium surfaces. Cosmetics : Essential component of bleaching formulations. Paper : modification of starch,repulping of wet - strength paper. Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans). Others : - Chemical synthesis - Water treatment(decontamination) - Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg) - Disinfectant ITEMS SPECIFICATIONS Appearance white crystalline salt Assay 99.0% w/w min Active oxygen 6.65% w/w min Chloride and chlorate(as CL) 0.005% w/w max Ammonia (NH4) 0.05% w/w max Manganese(Mn) 0.0001% w/w max Iron(Fe) 0.001% w/w max Heavy metals(as Pb) 0.001% w/w max Moisture 0.05% w/w max Decomposition of the product as supplied at above 65C Recommended storage temperature Normal Temperature Storage stability as from date of delivery 12 months
Commodity:Sodium Aluminate Other names:Aluminium sodium dioxide; SodiumaluminatecaHO; dialuminum; oxygen(-2) anion; sodiooxysodium Molecular formula: NaAlO2 CAS No.: 1302-42-7 Property: colorless, odorless, tasteless, strongly alkaline. Solid type: white powder or granules, hygroscopic, readily soluble in water. The aqueous solution may absorb CO2 and form aluminum hydroxide precipitate. Addition of NaOH is required to increase stability. Liquid type: transparent slurry, stable during storage life. Prolonged stay of diluted aqueous solution may cause aluminum hydroxide precipitate. Use: In the construction process, it can be used as leaking stoppage agent combined with the sodium silicate. In paper-making, this product can mix with aluminum sulfate to be a good filling agent. In water treatment, it can be used as additive of purifier. Technical specifications: ModelNa2Al2O4Al2O3Na2O/Al2O3Insoluble % Density, g/c m3Shelf life, month LiquidA-129181.700.51.48±0.0112 A-238241.300.51.50±0.0112 SolidSNA162391.25±0.050.5 24 SNA265411.25±0.050.5 24 SNA377481.25±0.050.5 24 SNA480501.25±0.050.5 24 Packing: Solid powder in 25kg PP bag Liquid in 300kg drums or 1500kg IBC tank
Wireless speaker, headset, wall charger, car charger, fast charger, power bank and usb cable.We supply products and shipping.
Prepainted steel coils, aluminium coils, composite panels, aluminium door windows, prefabricated house, container house, furniture, ceramics, sanitary, lighting products.We are exporter for prepainted steel coils, aluminium coils, composite panels, aluminium door windows, prefabricated house, container house, furniture, ceramics, sanitary,lighting products.
Fishmeal machine.Installation and commisioning of fishmeal machine, spare parts supply
Spot welder.
CNC router parts, edgebander parts, panel saw parts, tenoner parts, double end tenoner parts, machine tool parts, lathe machine parts, milling machine parts, machining center parts, CNC cutter bits, CNC wood lathe knives, CNC foam mill bits, CNC tooling systems such as tool changer forks, tool holders, collets, CNC spare parts.
.R&d, design and production of high simulation aircraft models.
Ceramic thin marble panel, fiberglass thin granite panel, aluminum plastic thin marble panel, honeycomb thin stone panel.
Petrochemicals,refining additives,refining catalysts,petroleum refining additives.Global sourcing,logistics and supply chain management,quality assurance and inspections, regulatory compliance support
Elevator, escalator, lift, cargo lift, moving walkway, elevator parts, dumbwaiter lift, passenger elevator, glass lift, passenger lift, panoramic lift, bed elevator, fuji lift, fuji elevator.
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.) 6mm*8m 8mm*6m 10mm*4.57m Main Color - black Technical Data Product Series FOCUS-6300 Series Application Automotive Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 230KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet. Advantages Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to Excellent performance in non-corrosive, weather resistance and adaptation. Applications Provide waterproof protection to car doors waterproof membrane. Provide waterproof and sealing protection to the battery of new energy automobile. Other waterproof applications on cars and new energy cars
