This production line adopts polyethylene (PE) material extrusion machine for film coating. The PE material is absorbed to material canister by automatic drying and material absorbing device. Then the material would be melted, after filter, the melted PE is distributed evenly onto the T shape mould. And finally it can be coated onto base material evenly. This is the advance model of PE coating machine. It has multi-extrusion mould, multi- working station, The coating and compouding can be done by one step. Our machine are using Siemens PLC for easy setting and operation, all parameter can be set by the touch screen.
Introduction: This machine is used for curling edge and seaming bottom for paper drum. Specification: Paper Tube Diameter Ï?280mm-Ï?450mm Speed 60pcs/hour Motor Power 3.75KW/380V/50HZ/3Phase Weight ~1200KG
1. Introduction: This machine is used for curling paper tube one top outside, expanding another top and cleaning paper tube. It is controlled by PLC. One set(5pcs) mold are with machine. Extra mold need extra payment. 2. Main specification: Model: SLJK-260S Tube feeding: Auto. Tube diameter: 50-85mm Tube height: 110-260mm Speed: 60 pcs/min Power: 2KW/380V/50Hz/3 phases Air pressure: 0.4-0.6Mpa Operator: 1 person Weight: ~1100kgs Dimension: 3000mm*1700mm*1750mm
China Fiber Cement Board Production Line Calcium Silicate Board Machine Fiber Reinforced Calcium Silicate Board is also named Calcium Silicate Board, which is made from Silicon materials, Calcium materials and certain amount of fiber. It is produced after several procedures such as pulp preparation, forming, autoclaving, drying, polishing and after-processing. It has advantages such as light in weight, high in strength, good in processing and easy in decorating, and it can also has performances of heat insulation and fire fighting. So it can be widely used in inner wall and suspended ceiling of buildings, sound panel and partition board partition board of gymnasium, theater and council chamber. It can also be used for special facilities in various industries, such as sound proof wall and apron plate of highway, permanent moulding board of constructional engineering, bay plate of train and ship, movable board for house and outer board of large-scale clad plate factory. Calcium Silicate Board is new environment-protection product with favorable market prospect and economic benefit.
Calcium Silicate Board production line Fiber Reinforced Calcium Silicate Board is also named Calcium Silicate Board, which is made from Silicon materials, Calcium materials and certain amount of fiber. It is produced after several procedures such as pulp preparation, forming, autoclaving, drying, polishing and after-processing. It has advantages such as light in weight, high in strength, good in processing and easy in decorating, and it can also has performances of heat insulation and fire fighting. So it can be widely used in inner wall and suspended ceiling of buildings, sound panel and partition board partition board of gymnasium, theater and council chamber. It can also be used for special facilities in various industries, such as sound proof wall and apron plate of highway, permanent moulding board of constructional engineering, bay plate of train and ship, movable board for house and outer board of large-scale clad plate factory. Calcium Silicate Board is new environment-protection product with favorable market prospect and economic benefit.
1. Brief description This machine is used for producing multi-layer paper bags. The produced bags are used for packing grain, chemical products, cement, powder, etc. This machine is equipped with touching panel, Delta PLC, Delta Inverter, servo control system. Printing machine can be added inline and work with the machine together. 2. Technical parameters Model: SAN-WFD720 Applicable paper reel: Paper reel width: A: 6601220mm paper reel Max. Dia.: B: 1250mm(paper reel dia. can make according to users need) paper weight: C: 70140gsm Paper reel core dia.: D: 76mm Bag length: unlimited(touch screen control, Servo set length; if have color code, can cut by tracking color code) Bag width:320600mm adjusting according need(can make M edge,edge width adjustable between 80-160mm) Bag layers: 1-4layers (according to users need, can make 3 layers paper+ 1 film) Bag making speed:30-85m/min Power: 13KW/380±10V/50HZ/3 phase 5wires Operator: 1-2persons Weight: ~5000kg Dimension:14000mm*2300mm*1900mm.
1. Introduction: This machine is used for polishing paper tube to make tube surface smooth, and coating wax on tube surface. The polished&wax-coated tubes are use for winding high quality winding materials. The machine is controlled by Mitsubishi PLC and inverter. 2. Main specification: Model: SANPWC-152 Tube diameter: 76mm-152mm Speed: 5-8m/min(if polish&wax-coating ID76 tube) Power: 35KW/380V/50HZ/3 phases Weight: ~5000kg Dimension: 18000mmX2000mmX1600mm
Product Introduction: This machine is used for slitting and rewinding thejumbo paper roll into smaller paper roll with required length. Technical parameters: Model: CM1600 Jumbo Roll max. width:1600mm Jumbo Roll max. diameter: 1200mm Jumbo Roll core diameter:76.2mm Finished Roll min. width:40mm Finished Roll max.diameter: 1200mm Paper Range:45-800gsm Speed:Max170m/min Blade;20 pairs Power: 7.5KW+1.1KW-2X0.75KW Weight: ~3.5t Dimension: Unwinder: 1700mm*3300mm*1300mm Rewinder:1500mm*2700mm*1200mm
1. Introduction: This machine is used for polishing paper tube to make tube surface smooth, and coating wax on tube surface. The polished&wax-coated tubes are use for winding high quality winding materials. The machine is controlled by Mitsubishi PLC and inverter. 2.Main specification: Model: SANPWC-152 Tube diameter: 76mm-152mm Speed: 5-8m/min(if polish&wax-coating ID76 tube) Power: 35KW/380V/50HZ/3 phases Weight: ~5000kg Dimension: 18000mmX2000mmX1600mm
Video:https://youtu.be/E2EJK_BtDA0 1. Introduction: This machine is used for polishing paper tube to make tube surface smooth, and coating wax on tube surface. The polished&wax-coated tubes are use for winding high quality winding materials. The machine is controlled by Mitsubishi PLC and inverter. 2. Main specification: Model: SANPWC-152 Tube diameter: 76mm-152mm Speed: 5-8m/min(if polish&wax-coating ID76 tube) Power: 35KW/380V/50HZ/3 phases Weight: ~5000kg Dimension: 18000mmX2000mmX1600mm
Product Introduction: This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. The small paper rolls are used to produce edge protector, paper tube etc.It has automatic blade position adjustment , edge blowing device, edge correcting controller and hydraulic paper loading/unloading system.1 pieces of pneumatic core shafts will be delivered together with machine. Technical Parameters: For Your Reference. Model SANJSR-02 Jumbo roll max.width 1600mm Jumbo roll max.diameter 1500mm Jumbo roll core diameter 76.2mm Finished roll min.width 50 mm Finished roll max.diameter 1300mm Paper range 50~700gsm Speed Max 250m/min Blade 20 pairs Power 7.5KW/380V/50HZ/3 phases Weight ~3000kgs Dimension Unwinder:2000mm*3500mm*1200mm, Rewinder: 3000mm*2500mm*1500mm
PLC Control Automatic Parallel Paper Tube Making Machine The machine is used for producing parallel paper tubes automatically. It consists of paper stand, paper edge grinding device, gluing device, paper cutting device, tube forming, tube discharging device, and a simple slanting stacker. The machine is equipped with Siemens PLC, Inverter. 2PCS mandrel is with machine. Technical parameter: Parameters: Model SANPT16-50 Max. Size of jumbo paper roll 1020 mm X 1300 mm (Width*Dia.) Max. Paper tube length 1200mm,1600mm,1800mm Paper tube inner diameter 16 - 50 mm Paper tube thickness 2-10 mm Paper gram mage 200-550 gsm Production speed 23-26/min
Brief Descriptions: cardboard tube machine is used for producing different diameter paper cores through changing core/tube shafts. It consists of paper stands, gluing stands, wax applying stand, tube forming device, online cutter and automatic tube falling bracket. This MC adopts drive shafts to drive winding heads. Drive shaft connecting with universal joint is more powerful and durable than drive chain, so MC runs very stably, and the produced tubes have very high strength. This technology is the most important to paper tube MC. 2pcs core shaft will be delivered with machine. The customer decides tube shaft diameter. Technical parameters: Model: CM-M Inner diameter of tube: 50mm-260mm Thickness of tube wall: 1mm-15mm Cutting mode: automatically cutting with round knife Speed: â?¤15m/min Quantity of shafts: 2pcs Power: 11KW, 380V, Weight: 2.2MT Dimensions: 4,000mm x 1,700mm x 1,600mm
How the Machine Works? https://www.youtube.com/watch?v=VAR1lznSxU4 1. Brief Introduction: The convolute paper tube making machine is used for producing parallel paper tubes automatically. It consists of paper stand, paper edge grinding device, gluing device (automatic cycle system with diaphragm pump), auto-sprinkler system, paper cutting device, tube forming, tube discharging device. The machine uses Panasonic servo motor for winding tubes and fixing the position of mandrel. And it also uses cylinder to fix the position of every paper sheet before paper sheet is conveyed into tube mandrel groove. This design can guarantee the machine running smoothly and stably, reduce rejected products. The machine is equipped with Siemens PLC, Delta Inverter. The produced tubes are mainly used in metallurgy industry, some tubes are for producing clothes racks and pencils. 2. Technical parameter: Model: SANPT16-76 Max. Size of jumbo paper roll: 1600mmx1300mm (Width*Dia.) Max. paper tube length: 1200mm Paper tube inner diameter: 16-76mm Paper tube thickness: 2.5-10mm Applicable paper grammage: 180-300gsm Production speed: 480-720pcs/hour Power supply: 4.61Kw, 380V, 50Hz Machine dimension: 1850x1780x1460mm
Full Automatic Paper yarn Cone Making Machine for Paper Cone Manufacturer is a fully autopaper cones machinery for textile industry. It is controlled by Delta PLC. It consists of paper cone winding unit, electric heating drying oven, and paper cone finishing unit. The whole paper cone production process is as follows, Jumbo paper reel feeding Inside and outside printing Paper edge grinding paper cutting paper cone winding & trimming Paper cone drying Unfinished products collecting V-shaped notching Line pressing Head curling (Bull nosing) Grinding Final products collecting. Technical parameters Speed: 48pcs/min Cone size: 5deg.57, 4deg.20 or 3deg.30 (optional) Applicable paper: 320-450gsm Applicable glue: white glue Compressed air: 1.2m3/min, 0.8MPa Power: 47KW/380V/50HZ/3Phases Operator: 2~3 persons/shift Weight: ~15T Needed working space: 14000mm X 8000mm X 5000mm How the machine Works?
1. Introduction: This automatic jumbo paper roll slitter and rewinder machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. The small paper rolls are used to produce cardboard paper edge protector, cardboard paper tube etc. It has automatic blade position adjustment, edge blowing device, edge correcting controller and hydraulic paper loading / unloading system. 2 pieces of pneumatic core shafts will be delivered together with machine. The machine owns below features: Mitsubishi PLC. Mitsubishi touching panel. Mitsubishi Inverter Mitsubishi MT40 Tension controller Mitsubishi Detector Taiwan Magnetic powder brake 2. Main specification: Model: SANJSR-02 Jumbo roll max.width: 1800mm Jumbo roll max.diameter: 1500mm Jumbo roll core diameter: 76.2mm Finished roll min.width: 50mm Finished roll max.diameter: 1000mm Paper range: 40~600gsm Speed: Max 230m/min Blade: 20pairs Power: 7.5KW/380V/50HZ/3phases Weight: ~3000kgs Dimension: Unwinder: 2000mm*3500mm*1200mm Rewinder: 3000mm*2500mm*1500mm
As the biggest producer and exporter of paper cup machines and related machines in China, each year we supply about 1000 sets of paper cup related machines in China and abroad. We have supplied more than 500 sets to India, Bangladesh, UAE, Egypt, Morocco, Turkey, Pakistan, Uzbekistan, Jordan etc. Our supplying machines are as follows, Paper cup machine, paper bowl machine and paper bucket machine. Paper cup handling machine (sticking handles onto paper cups). Paper cup jacketing machine (form an outer sleeve for paper cups or paper bowls). Paper plate machines. Die cutting machines, slitting machine. Paper cup packing machine. DFQ series microcomputer high speed paper roll slitting machine is suitable for slitting big roll materials such as paper, plastic films, cloth and synthetic leathers as well as all kinds of paper plastic compound materials like laminated paper, coated paper etc. This machine is wide used in packaging industries. Model: DFQ-1100 high speed reel paper slitting machine Unwinding diameter: 1200~1800mm Rewinding diameter: 800~1200mm Slitting speed: 250m/min Min width of rewinding: 50mm Power: 380V/50Hz/8KW Air Supply: Max 0.55Mpa Ã? 0.5m3/min Suitable raw material: paper 50~400gsm, paper-plastic (aluminum) compound 70~350gsm, and non-woven fabric. Dimension: 2200Ã?2100Ã?1300 Weight: 2900kg
video: https://youtu.be/d4Tj_D_m79Q 1.Introduction: This machine is an automatic all-fibre drum making machine. It is controlled by Taiwan ATEK PLC. It has 8 working positions. Its working process: Feeding round paperboard automatically, Manually feeding drum body and applying glue on paperboard, Rolling drum top edge automatically, Folding drum edge automatically, Pressing rolled drum edge automatically, Applying glue on pressed drum bottom automatically, Feed outside paperboard on drum bottom automatically, Pressing outside paperboard on drum bottom automatically, Unload drum automatically. 1set of drum body mold will be delivered together with machine. Customer decides mold size. Extra mold needs extra payment. 2.Technical parameter: Model: SANAFD-520/900 Max. Inner Diameter of drum: 520mm Max. Drum Height: 900mm Speed: 4-5times/min Power: 28.6KW/380V/50HZ/3Phases Operator: 1 person Weight: ~5600kg Dimension: 3800mm X 3000mm X 2100mm
Part â? Equipment introduction 1.The paper can assembly machine adopts advanced forming process, can complete a variety of forming processes, and can completely replace manual operation procedures. 2.The equipment has strong stability and high production efficiency, and can one-to-one operation,thus liberating labor force to a large extent. 3.The equipment has the advantages of saving raw materials and low energy consumption. 4.Stable structure operationï¼?forming stable and low noise. 5.It is easier and faster to replace the mold. Part â?¡ Advantage characteristics 1.Solving the problem of multi-manual operation in the traditional flat-bottomed paper can assembly process. 2.The equipment can automatically complete the labeling, inside curling, sealing, and scraping operations. 3.With high efficiency, high stability, high quality, assembly work high intelligence, can be unmanned operation and other performance characteristics. Part â?¢ Technical Parameters Model JL-ZG3535 Paper Tube Height 35-350mm Paper Tube Diameter 50-250mm Paper Tube Thickness 0.6-2mm Speed 10-18 pcs/min Dimension 2000Ã?2000Ã?1600mm Weight 500kg
1. WL-400B Automatic Cordless Rebar Tying Machine can do one hand operation, rebar bar could be tried quickly and safety 2. Simple and easy operation, work automatically 3. Powered by the rechargeable battery. 4. Tying could be completed by putting the jaw onto the crossed-rebar and pulling the trigger only. 5. Carrying plastic case supplied well protection.
