DIN 2391 ST52 Size as your requirment
The high-pressure and high- performance intra-vane pumps for mobile equipment. Features: 1. To adopt balanced hydraulic for the struction of intra-vane design, higher pressure, top to 21mpa. 2. To adopt floating structure for side plate, it will do compensation for end-face clearance by automatic, so that even the pump under high pressure it can maintain a high volumetric efficiency. 3. The side plate is made of dual-metal material, it improved the seizure resistance, and so that the life of pump will be longer. In plywood case.
Features 1. Intervene pumps with hydraulic balancing structure provide more stable performance and longer life since less pressure from vane on stator. 2. Twelve vane system provide low amplitude flow pulsation resulting in low system noise characteristics. 3. Various displacement and shafts with 4 different outlets opposite position make operation more flexible. 4. The cartridge is independent of the drive shaft, allowing for easy serving without remora the pump from its mounting. In plywood case.
Hydraulic system has multiple overload protection, oil temperature alarm, oil level alarm protection automatic protection device, electrical system uses mature plc control, to ensure the safety of the equipment and the operator. Work under pressure cylinder are made big flow charging valve and drop tank at the same time for liquid, will be able to realize the rapid filling oil, oil compensating, improve the oil return, effectively save forging auxiliary time, improve the efficiency of forging. Equipment installation have reliable cooling circulatory system, and can steadily control temperature rise to ensure that the system is safe and reliable operation.
The machine working pressure, the pressing speed, the scope of the itinerary may need to carry on the adjustment according to the process. And the constant pressure to complete and scheduled two-way process, constant pressure the craft way. To have after the suppression guarantees pressure and time delay to be automatic return action. Optional accessories: photoelectric protection device. Stroke, pressure, time digital display system. Hydraulic system heating, cooling device. Plc programmable controller, blanking buffer device, mould heating and temperature control device, in die with floating guide and rolling bracket, etc.
Offer replacement / genuine for various hydraulic valve for lots of brands as like the rexroth, vickers, poclain, parker, caterpillar, etc. We suggest the vickers of cg2v-6, cg2v-8, cg5v-6, cg5v-8 xg2v-6, xg2v-8 , dg4v-3s-*a, dg4v-3s-*b, dg4v-3s-*c, dg4v-3s-*n; dg4v-3-*a, dg4v-3-*b, dg4v-3-*c, dg4v-3-*n; dg4v-5s-*a, dg4v-5s-*b, dg4v-5s-*c, dg4v-5s-*n; dg4v-5-*a; rexroth of 4we6 / 4we10 / wh / weh / whd / wmm / wmr / m-sed / m-sew / dbd / zdb / z2db / db-4x/w65 / dbw-4x/w65 / db-5x / dbw-5xdr6dp / da / daw / dr10dp / zdr / dr-4x / dr-5x / dr10k / c / lc / lfa / dv / drv / drvp / dvp / mk / mg / 2frm / hed / z1s / z2s / z4s / fd / s, etc.... Service : offer replacement, genuine. The replacement means for the required product made in china fully interchangeable with genuine, as its technique and function is same as the data of the genuine itself. The genuine is made in the original brand country, such as the brand bosch rexroth is in germany. Pls feel free to give us your specific style number. We will bring you the best product and service at most competitive rate. Sincerely hope to build up the close business relation with you on basis of the mutual benefit in a long term. Thank you. Box
KHB series, Bsp 2" female thread, 2 way full port, Carbon steel material, High pressure wog 7250psi, Pom ball seal, Nbr o-ring, Alloy zinc crooked handle Plywood case 50*36*21cm
High pressure 500bar Bsp1/4~2 inch Dn 6mm~50mm Steel or stainless steel material Nbr/fpm seals Zinc alloy crooked handle. Plywood case 50*36*21cm
Hydraulic fluid applied High pressure 500bar Diameter 6mm~25mm Size npt/bsp 1/4"~2" Steel ball & bosy Nbr/fpm seals. Plywood case 50*36*21cm
2 position 3 way ball valve L or t port valve ball Stainless steel material Marine or gas usage High pressure 500bar. Plywood case 50*36*21cm
The lq screw hoists, specification: 0.3t-60t, model: manual-control, motor-drive, automatic remote control, fixed or mobile. According to the dimension of the sluice gates
We China Hman Machinery factory are professional leading manufacturer/supplier/factory/vendor/distributor/wholesaler in China for hydraulic power pack / unit, mini power pack, hydraulic cylinder, linear actuator, hydraulic pump, hydraulic valve, motor, tire mould, logistic equipment and other relative handling quipment. Actuator for solar tracker, satellite actuator, linear actuator for wheelchair, for lifting, tire mould, etc. Our hydraulic power pack widely used in our lifting equipment, agricultural machine, medical machine, marine equipment, off shore, dock leveler, car tailgate, scissor lift, etc.
We China Hman Machinery factory are professional leading manufacturer in China for hydraulic power pack / unit, mini power pack, hydraulic cylinder, linear actuator, hydraulic pump, hydraulic valve, motor, tire mould, logistic equipment and other relative handling equipment. Actuator for solar tracker, satellite actuator, linear actuator for wheelchair, for lifting, tire mould, etc. Our hydraulic power pack widely used in our lifting equipment, agricultural machine, medical machine, marine equipment, off shore, dock leveler, car tailgate, scissor lift, etc. We are also strong in OEM project with our innovative engineers and specialized machineries. We passed TUV, GE, UL.
We make a wide range of hydraulic cylinders, tie rod hydraulic cylinders, welded hydraulic cylinders, custom hydraulic cylinders and hydraulic power units, which are CE certified. Agricultural Tid Rod Cylinder 2T SERIES / Agricultural Tid Rod Cylinder 3T SERIES / Hydraulic Welded Cylinders 500 SERIES / Hydraulic Welded Cylinders 600 SERIES / Hydraulic Welded Cylinders 700 SERIES / Hydraulic Welded Cylinders 800 SERIES / Hydraulic Welded Cylinders Plunger Ttpe Cylinders.
Weld hydraulic cylinders and tie rod hydraulic cylinders are most frequently used on the marker. One of the difference between hydraulic welded cylinder and hydraulic tie rod cylinder is that the former has no tie rods , while the latter has. In a welded hydraulic cylinder, the end caps and the ports are welded to the cylinder barrel respectively. The front rod gland is fixed to the barrel by bolts or threaded into the barrel. This design assists in the removal of the piston rod assembly and the rod seals, thus making hydraulic cylinder convenient for maintenance and service. In comparison with tie rod hydraulic cylinders, welded body cylinders have a plenty of advantages.For instance, welded hydraulic cylinders are shorter and narrower. This enables it to be fitted better into the tight confines of various machines. Tie rod cylinders usually suffer from failure due to tie rod stretch at high pressure and long strokes, but hydraulic welded cylinders don't, due to its no-tie-rod structure. Additionally,welded hydraulic cylinders are flexible in design and customized . For example, the design of multistage telescopic cylinders based on a welded body hydraulic cylinder is allowable due to the smooth outer body of a welded cylinder. Due to aforementioned advantage, welded hydraulic cylinders are taking an increasing share in both national and international mobile hydraulic equipment market. They lend themselves to variety of construction machines and material handing equipment, including excavators, bulldozers, road graders, forklift trucks, and telehandlers,and more. Meanwhile, welded hydraulic cylinders also find applications in heavy equipment like cranes, oil rigs, and so on. Wantong Hydraulic Power Machinery Company , a welded hydraulic cylinder manufacturer in China, has over 20 years production experience in hydraulic equipment filed. In addition to welded cylinders, we can also provide tie rod cylinders, AC and DC hydraulic power units ,etc. Polystyrene or plastic and paper inner packing, iron or wood outer packing.
Our advantage: long durability of our steel wire braid hydraulic rubber hose, and fire-resistant pvc coated fabric conveyor belt(especially appliable in coal mines). To be frank, there are like millions of workshops who produce hydraulic hose in china. But we are outstanding among them relying on the superior quality of hydraulic hose. Packed in rolls.
We has been specialized in manufacturing Open die forging hydraulic presses, Close die forging hydraulic presses, Forging manipulators, Ring rolling mills, High speed forging units and other hydraulic presses for many years.
1.The C-body design, use small space and easy to operate. 2. Whole body cast, rigid and stable performance. 3. Rod mechanical limit, under pressure stroke adjustable , positioning accuracy 0.02mm. 4. Key and Foot Switch two cycle start modes. 5. Downward movement with the fast and feeding speed£»the fast forward improve work efficiency£¬feeding speeds can be adjusted to protect the mold, improve product quality. 6.Safety designed, using both hands to operate, with emergency stop and jog up and down function. 7. Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit.etc. 8. Infrared protection can be configured (Optional).
Hydraulic workshop press ( one column) Product Feature: 1.The C-body design, whole body cast, high rigid. 2. All hydraulic systems, greater pressure, stable and reliable performance. 3. Rod mechanical limit, under pressure stroke adjustable , positioning accuracy 0.02mm. 4. Downward movement with the fast and Feeding speed£¬the fast forward improve work efficiency£»feeding speeds can be adjusted to protect the mold and improve product quality. 5. Safety designed, using both hands to operate, with emergency stop button and jog up and down function. 6.Key and Foot Switch two cycle start modes. 7. Under cylinder can be configured to facilitate part to taken out(Optional). 8. Infrared protection can be configured (Optional). Technical Parameters: Theoretical output pressure 30KN(3t) Rated oil pressure 10Mpa Max stroke 150mm Max Opening Height 230mm Throat Depth 140mm Fast-forward speed 120mm/s Feeding speed 10~80mm/s Return speed 110mm/s The size of the working table 410 X 280mm The height of the working table 720mm Size of the mold mounting hole 32mm Power of motor 2.2kw Power(3AC,50Hz)380V Weight 420kg.
BY-M Series of Six Workign Positions Single Column Hydrauli press 1.The C-body design, compact structure, overall casting make the machine high rigid 2. The design of six station save time for clamping products and increase productivity. 3. Rod mechanical limit, under pressure stroke adjustable , positioning accuracy 0.02mm. 4. Safety designed, using both hands to operate, with emergency stop button and jog up and down function. 5. key and Foot Switch cycle start mode. Pressure Speed and time can be adjusted. 6. Widely used in parts of the press-fit shape, stretching, bending, punching, stamping, shaft alignment and press-fit etc. 7. Infrared protection can be configured (Optional). Technical Parameters: Theoretical output pressure 150KN(10t) Rated oil pressure 14Mpa Max stroke 200mm Max Opening Height 340mm Throat Depth 140mm Fast-forward speed 90mm/s Feeding speed 10~100mm/s Return speed 90mm/s Number of working position 6 The size of the working table 680mm The height of the working table 890mm Size of the mold mounting hole 32mm Power(3AC,50Hz)380V Power of motor 5.5KW Weight 1800kg.
