Introduction for hydraulic oil press : Small oil press machine manual operation , low price, widely used in family and small oil factory. This hydraulic oil press machine is suitable for cold pressing or hot pressing many oil seeds , Especially for pressing sesame, pine nut, walnut, and so on valuable oil seeds. Full automatic hydraulic oil press is a small oil press which is most convenient in operation, highest yield efficiency, as well as least replacement spare parts. Only one hydraulic oil press machine, you could get the better oil and easy to operate. Structure of hydraulic oil press machine 1.Main engine:Main engine includes base, upright, top plate, oil drip pan nut and so on , it is one of the main parts. Firstly the oil material is put into the assembly of the press boring ,then it being droved up by the oil cylinder piston ,oil will outflow from the gap of press boring ,and then pass the oil drip pan to the drum for oil storage. 2.Hydraulic System :Hydraulic system is the main power force of this machine, it includes transmission shaft, turbine, worm gear, gear pump, high pressure pump, overflow valve; super high pressure safety valve; hand-operated valve; seamless steel tube; pipeline connect and other spare parts. This machine adopts the advanced power pack of the world, and compared with two plunger pump, it is faster , higher pressure and can resist higher temperature, it can continue working when the oil temperature is above 65 but neednt cooling unit. 3.Electronic system:Electronic system is the most advanced part of this machine, it is fully automatic, easy to operate, and theres no special request to the operator, so this machine is particularly suitable for peasant. This machine is composed of motor, volt meter, pressure gauge, power insurance and so on.
product features: Compact, flat design for use where other cylinders will not fit RSM-750, 1000 and 1500 have handle for easy carrying Mounting holes permit easy fixturing CR-400 coupler and dustcap included on all models
product features: Fully automatic hydraulic design-automatically up and down, grip and pull. Made of alloy steel with super-high strength; double-acting hydraulic design. Used for dismantling large shafts and perforating work pieces. Available in 2 and 3 jaws design allows adding a pulling disc to pull bearings. Roller cart makes it available to change workplace. Want to know the size you need? Come visit our website now https://www.atwwren.com/products/REDUCER_Insert.html Or contact us Tel: +86 571 8811 5720 Fax: 0571-88110210 Postcode: 311100 E-mail:info@wrenchina.com Company Name: Hang Zhou WREN Hydraulic Equipment Manufacturing Co., Ltd. Address: No. 24, Xingxing Road, Linping, Hang Zhou, China
Hydraulic track maintenance jack The powerful jack is a special purpose tool used for railway track maintenance. It's a unique product: one jack two ways of usage: both lifting and aligning of the railway track. Safety to use, less hand effort needed, portable and easy to use. It's a patent product. There are more than 100, 000 sets of the device have been used in china railroad daily maintenance for more than 10 years and gets good reputation. Main technical data: 20t device: 1, max lifting force: 200kn 2, max lifting capacity: 125mm 3, max aligning force: 200kn 4, max aligning capacity: 80mm 5, max oil pressure: 48mpa 6, hand end force: 250-350n 7, weight: 23kg 8, dimension: 570x180x240mm We are looking for pakistan railway supplier to cooperate with us for our wonderful powerful jack for railway track maintenance. One set per wood case pack.
As the exact machine in bio-organic fertilizer production,compost turner plays a significant role in symboling fertilizer developing industry. Our hydraulic self-propelled compost turner is of advanced design and convenient operation based on absorption of fertilizing technology at home and abroad. The turing parts and other main working parts are driven by hydraulic system, thats why we call it hydraulic compost turner.Our compost turner 30 series is quite suitable to capacity of less than 30000TPY compost fermentation production.
Automatic spring return.There is over-stroke protection to ensure frequent use. Protect for the stroke over the maximum valueï¼?this will reduce the possibility of broken of seal by incorrect operation. Hold all the function of other Tensioners More function operation by one Tensioner for many bolts
WREN was established in 1992 as a professional manufacturer of a complete range hydraulic equipment from 70Mpa to 300Mpa operating pressures.We offer reducer inserts according to industry standards. These reducers are widely used in various projects. Reducer insert fittings also support standard socket weld fittings to reduce tubing reduction in a faster and more economical manner. Our gearboxes are made from high quality raw materials to provide the strength and durability you need.
Max hydraulic hose 2"4SP Crimp range 4-87mm Max opening without dies 122mm Max die opening 28mm Motor & Voltage 380V/3kW Open time â?¤1.5s Close time â?¤6s Control Button Foot pedal included Noise level â?¤75dB Die sets 10sets Machine weight 310KG Package weight 380KG Machine size 80*63*137.6(cm) Package size 89*72*159 (cm) Crimping force 640T
KM-81 series hose crimpers are our new products. This type machine has high working efficiency, it can undertake batch operation, with a large opening, and it can adapt to various shaped connectors, high precision crimping, ensure the quality of the products. With the development of technology and innovation, Thecontrol system ofthis machine has been upgraded to a full digital control type, make customers working more simply, fast, intelligent. We will do our best to create satisfied with the brand!
Product Description 1.Working pressure: up to 9000 psi 2.Working temperature:-20 to 200 Celsius Degree 3.Size: 1/8" to 1 1/2" (Fractional Tube) or 2 to 38 mm (Metric Tube) 4.Diverse materials and configurations are available. 5.Precision machined components ensure perfect deformation of the ferrules and tubing. 6.Hardened threads and smoothed surface finishes extend fitting life and prevent sticking of the matching threads. 7.Radius junction design with elbows provides smooth flow path. 8.Every fitting is stamped with size, material, and heat code 9.Fittings are easy to disconnect and retighten.
This model is used to press all kinds of waste paper(cartons, OCC, books, newpapers, kraft paper, etc), PET bottle, plastic films, fabric, etc. Production capacity: 4-5 t/h Bale size: 1100(W)*1250(H)*1600(L) (length is adjustable) Main cylinder: Φ250 1pc Hopper size: 2000x1100 mm Motor: 45kw+5.5kw+5.5kw Pressing force: 100 T Machine weight: About 16 Tons Transportation: 2x40ft container
This model is used to press all kinds of straw, hay, cotton stalk, corn stalk, sugarcane straw, alfalfa, etc. Model: Horizontal straw baler HFST8-10 Production capacity: 8-10 t/h Bale size: 1250(W)*1050(H) (Length is adjustable) Bale weight: 500kg/bale Main cylinder: Φ220 Nominal pressure: 70 T Motor: 45kw+7.5kw+5.5kw Strapping: 5
Since PTFE will not flow above its melting point, it cannot be injection molded and requires special processing techniques. Molded PTFE is processed by first compression molding the powder into preforms, and then sintering the preforms in a process analogous to sintered metal processing. This process creates geometric shapes that can then be machined, fused, and/or welded.
Crosscutting machine is corrugated cardboard production line in the cutting of cardboard products mechanicalequipment, and its technical performance and equipment adjustment conditions directly affect the finishedcardboard cutting size is accurate, the pressure line is broken and the appearance of the cut is smooth and beautiful. 1.1-Heavy model single facer 2-gear box drive 3-Max speed 200m/min 2.It can store 200 units orders,replace the cutter specifications quickly and accurately,changing orders without stop,And enables networked computers to facilitate production management. 3.Germany Bryant servo motor drive controller, Taiwan Eview yield 10.4 inches color touch screen display,the project at a glance.
Product Description: 1, The sturcture is double rotary shafts with four arms; Support two paper mill rolls on both arms at the same time. 2, Hydraulic control for paper mill roller up-down, clamp-open and centering. 3, Web tension is controlled by pneumatic brake or manual brake; Toothed chucks are optional. 4, Effective width: 1200mm-2800mm; Maximum paper roll diameter:¢1500mm. 5, Maximum support weight: V5B: 2.5T, V6B:3.5T. 6, Main axis: 242mm / 270mm.
Since PTFE will not flow above its melting point, it cannot be injection molded and requires special processing techniques. Molded PTFE is processed by first compression molding the powder into preforms, and then sintering the preforms in a process analogous to sintered metal processing. This process creates geometric shapes that can then be machined, fused, and/or welded.
Professional excavator spare parts factory. So many different type spare parts for you to choose.
Shandong Jinyao Construction Machinery Equipment Co., Ltd is a modern manufacturing enterprise, which dedicate in the independently research and development , produce and sale series of products such as Crushing, Hydraulic Equipment etc. Jinyao has the most sophisticated technology development team, the advanced technological equipment, inspection equipment. As well as the perfect management system, has guaranteed the product performance and the quality.
Genuine and new hydraulic pump
Hydraulic plate compactor
