Flow: 10m3/h
Head: 65m
Power: 4kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380v
Phase: 3 phase/50hz
Color: blue
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Application :
Deep well water
Farm irrigation
Sprinkling irrigation
Urban and rural industry
Mine supply and drainage.
Flow: 10m3/h
Head: 95m
Power: 5.5kw
Material: cast iron
Medium: clean water
Outlet dia: 32mm
Diameter: 175mm
Speed: 2850r/min
Voltage: 380v
Phase: 3 phase/50hz
Color: blue
Qj submersible pumps parameters:
Flow range10~500m3/h, lift scope within 5~405m;
Caliber scope 32~203mm, temperature range-15~80° c.
Products overview:
Qj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation.
Product use conditions:
Qj submersible pumps use conditions
1. 380 v bias voltage does not exceed + -5% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply.
2. Electrical cavity must be filled with water.
3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m.
4. Electrical from the bottom of the bottom of the well shall be not less than 3 m.
5. The water temperature no higher than 20 ° c, qjr-temperature hot water pump up to 80 ° c.
6. Water and sand content (by mass) of not more than 0.01%.
7. Water ph 6.5-8.5.
8. The hydrogen sulfide in water content is not more than 1.5 mg / l.
Application :
Deep well water
Farm irrigation
Sprinkling irrigation
Urban and rural industry
Mine supply and drainage.
Model
Series 5/a series 5/v series 5/w
Pressure range 1.6~3 bar 70~80 kpa 2~3 bar
Flow range 6~11 l/min 5~11 l/min 800~1200ml
Power 6~ 16 w
Dc voltage 6v 9v 12v 24v brushless
Dimension 86*60*38mm
Weight 286g
Technology features
24 hours working under normal condition
Oil-free
Compact size, high negative pressure, high performance price ratio
Maintenance free
High weight
Low noise level&vibration and lower power consumption
Can be mounted in any plane
Flow can be adjusted (customized)
Adopt customized industrial raw material, it can work with long time in high or low temperature under harsh condition
Application
Electron&electric appliance, food industry (jucier, vacuum preservation etc)
Medical (oxygenators, sputum suction devices, blood pressure meter)
Digital printing equipment
Lab equiment, chemical analysis
Beauty equipment (cupping)
Automation (parts adsorption)
Jiuzhou is a professional company in designing, manufacturing and selling high pressure plunger pump, high pressure washer and some other cleaning machines.
Our company is willing to cooperate with all friends worldwide. Please feel free to contact us for more information.
Other Features:
1) 10m high pressure hose.
2) Long usage life.
3) The motor drives the plunger pump directly.
4) It has the features of mordernly designed, compact structure, small size.
5) convenient to move, high pressure and efficiency, less heat.
Application:
This high pressure washer is mainly used in cleaning and maintenance of all kinds of motor vehicles, engineering vehicles, agricultural machinery.Also it can be used to disinfect and clean of playground, square, exterior walls, doors, windows, hotel, hospital, gym and livestock farm.
Model No.
QL-690
Motor type Three-phase capacitor motor
Power Supply 380V/50HZ
Max Pressure
15Mpa
Working Pressure 1-15Mpa(Adjustable)
Power 4Kw
RPM 1450R/M
Theoretical Flow Rate ¡¨¹ 15L/min
Net weihgt
76kg
Gross Weight 80kg
Size 80¡¨¢35¡¨¢80cm
Move Modes Lift or push
Benefits:
1, Clear and exact images.
2, No distortion
3, The backing paint resists acid and moisture.
4, Can be used for more than 20 years indoor use
Applications: - Indoor use only.
1, Decoration and furniture.
2, Bathroom mirrors.
3, Rearview mirror for automobile.
4, Material mirror for safety mirror and shaped mirror and beveled mirror.
5, Fitness/Gym Mirror
6, Other places that requiring for silver mirror.
Specifications:
1, Thickness: 2mm to 6 mm
2, Max size: 2440 X 3660mm
3, Other standard sizes:
1220 X 915mm, 1830 X 1220mm, 1830 X 2440mm, 1524 X 2440mm,
1650 X 2200mm, 1830 X 3050mm, 2134 X 3050mm, 2134 X 3300mm,
2134 X 3660mm, 2250 X 3300mm, 2440 X 3050mm, 2440 X 3660mm.
4, Cut to sizes available as per request.
Sepecification
Delivery Time 30days after receipt of deposit
Form of Payment L/C or deposit by T/T, the balance before shipment etc
Shipment From Qingdao, China
Inspection standard Surface no scratches, no handprint, no depletion mark,
no stain, no mildew, avalanche edge, lack of Angle etc.
Glass mirror, mirror clean, and there can be no stain, besmirch.
Packaging Request 1) standard wooden crates; 2) end-caps packing; 1) or 2) into container truck transportation.
We, Sinoy , INC. Expert in wooden crates packing reinforce measures.
Pls rest assure that it can prevent possible breakage on the road of long distance of ocean transportation.
Attention for process of package Use scratch proof material between mirror sheets and
strictly prohibit sliding one mirror sheet on the other mirror sheet surface.
Transportation and storage Put in dry and airy place, not to be laid flat or sideling,
prevent touching acid-base etc corrosion materials.
Material Standard SMFG2004-03 standard, top quality mirror grade glass
Certificate CE, ISO9001: 2008, SGS etc
Spraying the Code As specific request
Mark As specific request
Other Accessory
Dryer etc
After-Sale Service 1) common samples are free.
2)special processing samples' design fee will be decucted when the order is placed.
3)Quality discrepancy expiry date: within 30days after receiving the cargo.
1. Heating mode only, max water outlet temperature is 80¡æ
2. Copeland evi scroll compressor, lcd display controller
3. Installed outdoor (on outdoor wall or in yard or top of house)
4. Needn't electric heater back up
5. Refrigerant:r134a
6. Capacity: 7~24 kw
1, permanent magnet and continuous duty
2, self-priming so pump can be located above water tank
3, runs dry for extended periods of time without damage
4, hold excellent motor keep stable temperature of pump body
Size: 11.3" l x 7" w x 6.7" h
( 288 x 178 x 171 mm)
4, self priming: more than 2 meters
5, port size: hose tail connection 3/4"
6, pressure max: 25psi (1.5bar)
7, diaphragm material: vition
8, check valve made: vition
9, voltage: 12v, 24v dc115v, 220v, 230vac
10, power : on/off switch
11, head of pump: glass fibre
12, body material(dc): glass fibre
13, body material(ac): aluminium
14, liquid of application: water, oil, urea, adblue
Wholesale Price Transparent One Way Mirror
One way morro is one kind of high technology glass mirror which is partially reflective and partially transparent. It is usually being used as a regular mirror in bright room,with a much darker room on the other side. People on the bright side can see only their reflection and it looks like regular mirror. People on the dark side can see through it, almost like through transparent window.
One Way Mirror
One way morro is one kind of high technology glass mirror which is partially reflective and partially transparent. It is usually being used as a regular mirror in bright room,with a much darker room on the other side. People on the bright side can see only their reflection and it looks like regular mirror. People on the dark side can see through it, almost like through transparent window.
One way morro, it is a glass mirror that one side with transparent and the other with reflective, is created by placing a layer of semi-transparent film of aluminum an acrylic substrate. This allows a percentage of light to pass through and reflects the rest.
Wholesale Price Transparent One Way Mirror
One way morro is one kind of high technology glass mirror which is partially reflective and partially transparent. It is usually being used as a regular mirror in bright room,with a much darker room on the other side. People on the bright side can see only their reflection and it looks like regular mirror. People on the dark side can see through it, almost like through transparent window.
One Way Mirror
One way morro is one kind of high technology glass mirror which is partially reflective and partially transparent. It is usually being used as a regular mirror in bright room,with a much darker room on the other side. People on the bright side can see only their reflection and it looks like regular mirror. People on the dark side can see through it, almost like through transparent window.
One way morro, it is a glass mirror that one side with transparent and the other with reflective, is created by placing a layer of semi-transparent film of aluminum an acrylic substrate. This allows a percentage of light to pass through and reflects the rest.
Concave Mirror for Sale
The concave mirror is the reflection imaging, it is not the light through, but the reflection back to the imaging instrument, the light observes the reflection law. A concave mirror is a spherical mirror which has no chromatic aberration because there is no refraction but still has a spherical aberration. If a mirror without spherical aberration is required, a parabolic / ellipsoidal / hyperboloid mirror can be selected.
Concave mirrors can be used to create images of light sources. Concave mirrors can be tricky to use as the object and image will now exist in the same space. However concave mirrors have one incredible characteristic in that the image location and quality is completely independent of the wavelength and so does not create chromatic aberration unlike equivalent lens optics. This allows the design of very wide spectral range instruments and does allow a system that will work in the IR to be aligned using visible light.
Concave mirrors are typically used in reflecting telescope, electron microscopes and a range of scientific instrumentation applications where there is a requirement to image distant objects.
Our range of quality concave mirrors are coated for use in the visible and near infra-red regions. We can also strip the aluminium coating from our stock concave optical mirrors and coat with a desired coating, i.e. Protected Gold or UV aluminium. This can be done at short notice to create your bespoke custom concave mirror. This can be very helpful with development work.
Hyp design is a leading optics supplier of photonics products including optical components, lens systems and opto-mechanical assemblies in UV, Visible,NIR, SWIR applications. Our clients spanning across defense, security, bioengineering, pharmaceutical, institutional, industrial and research industries worldwide.
Heat mirrors and cold mirrors are special bandpass filters that can reflect infrared light and ultraviolet light and only allow visible light to pass through. These optical mirrors, also known as heat-absorbing filters, also known as IR cut filters. Hot mirror will be a large number of heat generated near-infrared light isolated optical path to protect the heat-sensitive devices, where the need for high light intensity and need to be separated from the heat applications can be.
If you want to know more about optical design manufacturing, please visit our website.
Mirrors
Spherical Reflection Mirrors, Off-Axis Parabolic Mirrors, Plano Mirrors With High Reflection Coating
Optical Mirrors are designed to reflect light for a variety of applications, including beam steering, interferometry, imaging, or illumination. Optical Mirrors are used in a wide range of industries, such as life sciences, astronomy, metrology, semiconductor, or solar.
Hyperion Optics offers a range of laser, flat, metal substrate, focusing, or specialty Optical Mirrors in a multitude of reflective coating options, including Protected Aluminum, Enhanced Aluminum, Protected Silver, Protected Gold, or Dielectric. Choosing the proper reflective coating option ensures high reflectivity of the needed wavelength or wavelength range. Optical Mirrors designed for laser applications are optimized for the given laser wavelength. Additionally, Optical Mirrors designed for lasers feature damage thresholds that are suitable for the designated laser. Metal substrate Optical Mirrors are ideal for applications requiring a constant coefficient of thermal expansion between the Optical Mirror and the mount. Optical Mirrors with a concave surface are ideal for light focusing applications.
Glass mirror: silver mirror and aluminum mirror
Lots shapes and sizes
The thickness:2-6mm
The safety backing: Cat I or Cat II
The edges:Raw cut,polished edges,bevelled edges
Package: Wooden crates
Gold mirror is make with quality clear float glass,by magnetron sputtering coloured coating on one side of glass,form tinted mirrors reflection appearance,antioxidition coating not rusting with time,enduring longer,usually be use in interior decor,such as display cases,decorative walls,wardrobe doors,bathroom,furniture and tables.
19884 Household General Merchandise Suppliers
Short on time? Let Household General Merchandise sellers contact you.
