1.Dia 50mm-219mm, length 190-3400mm, which are used in the steel industry, harbor, coal industry, power industry, cement industry, etc 2.Tube: Customize Welded Steel Tube 3.Shaft: Bright Drawn Steel to required bearing tolerance 4.Shaft End: Both ends of Tube are simultaneously machined and chamfered. 5.Bearing: Single & Double Row Deep Groove Ball Bearing 2RZ&2Z with C3 clearance. 6.Seals: Grease retaining inner seal with Multi-stage Labyrinth and Retention Cap with Outboard Rubbing Flinger Seal. 7. Lubrication: Grease is Lithium soap type grease with Rust Inhibitors. 8. Welding: Mixed gas shielded arc welding end 9. Our roller saves on repair and maintenance costs of the conveyer belt due to the concentric design which decreases vibration.
Rubber dam Rubber dam has proved to be a cost-effective approach for solving problems in the irrigation, hydroelectric, recreation and water conservation industries. The most important benefits of bridgestone rubber dam are: Low cost compared to other controllable gates Low environmental impact Long service life Very low maintenance Simple construction and installation on new or existing foundation Excellent operational features in ice conditions Safe deflation under any conditions
Material: Made of asbestos fibre, rubber and heat-resisting packing material, compressing it to thick paper . Uses: Used for the equipment in water, steam, etc.And used as sealing material in the joints of pipeline Working pressure : 0.8 mpa, max working temperature: 150¡æ Sizes: 4100 x 1500 x (0.5 ¨c 6.0)mm, 2000 x 1500 x (0.5 ¨c 6.0)mm, 1500 x 1360 x (0.5 ¨c 6.0)mm, 3810 x 1270 x (0.5 ¨c 6.0)mm 1270 x 1270 x (0.5 ¨c 6.0)mm, 1500 x 1500 x (0.5 ¨c 6.0)mm The other size is optional or according to the requirements of customers. Packing: in wooden pallet of about 1000 kgs, 2000kgs net each.
Material: rubber Width:300 mm Thickness: 8 mm Tensile strength: 18mpa
Water inflatable rubber dam is a kind of water-inflated stable tear-shaped rubber dam. Rubber dam consists of civil works, dam bag, anchor, filling drainage facilities and control system. It is made of strength canvas as reinforced framework and rubber layer which ensure tightness of the rubber layers. Compared with air inflatable rubber dam, water inflatable rubber dam is more expensive and slower to fill but more stable to provide optimal control over upstream water levels. It is fixed to concrete to create a permanent dam or floodgate. Water can spill over the top automatically without additional support or adjustment. When the flood is coming, rubber weir can completely collapse, does not have water resistance. It is usually used to retain water, adjust the water level, irrigation, generate hydro-electric power, control flood, etc. Specification Material structure: one cloth two rubber, two clothes three rubber, three clothes four rubber, etc. Color: blue, black, red, gray, purple, etc. Medium in dam: water. According to installation method: Single anchor. Double anchor (pillow-like dam and inclined dam). According to anchored method: Bolt anchored. Wedge anchored. Customization can be available. Feature It is more expensive, slower to fill, but more stable to control over upstream water level than air inflatable rubber dam. Tear-shaped rubber dam is on the wide concrete still. It can withstand overflow 50% in height. It can operate without electric power. Outer rubber is thick, is resistant to wear, sunlight, heat, ozone, aging, etc. Middle layer rubber can protect canvas and connect canvas. Inner rubber has high airtight and watertight, is resistant to aging of canvas. Inflating and deflating time of water inflatable rubber dam is longer than air inflatable rubber dam. Inflating water stably, dam bag is heavy which can decrease vibration. Water inflatable rubber dam is high volume low pressure system, so high pressure compressors are not needed. Compared with conventional sluice dam, investment of water inflatable rubber dam reduced by 30-70%, wood saved by over 60%, steel saved by 30-50%, concrete saved by 50%.
Bookend rubber dam, also named as spine type rubber dam, has obvious fins on the dam body to form a rising angle when the dam is inflated. It is made of high strength canvas as the reinforced framework and synthetic rubber fixed to a reinforced concrete foundation using clamping plates and anchor bolts. In dry seasons, the rubber dam is inflated by air or water to retain water for industrial, agricultural and living water demands; in rainy seasons, the air or water in the sealed bag can be deflated out to release floodwater from river course. Bookend rubber dam heightens overflow's water head and eliminates vacuum underneath the dam to reduce the vibration and abrasion. It is usually used to retain water, agricultural irrigation, generate electricity, control flood, beautify environment, etc. Specification Material structure: one cloth two rubber, two clothes three rubber, three clothes four rubber, etc. Color: blue, black, red, gray, purple, etc. Medium in dam: air or water. According to installation method: Single anchor. Double anchor (pillow-like dam and inclined dam). According to anchored method: Bolt anchored. Wedge anchored. Customization can be available. Feature It can be resistant to vibration, abrasion, dirt, sediment, sedimentation, sunlight, heat, ozone. It has smooth surface with spines, can eliminate vacuum underneath the dam, can create a beautiful scene of waterfall. Automatic inflation and deflation system provides the dam excellent control of height and air pressure. Vulcanization molding one time, increase the lateral tension of dam bag.
silicone rubber hose size:2mm -100mm(can be customized) thickness:1mm 1.5mm 2mm (can be customized) hardness:shore 65 color:white,black,red,blue,yellow,ect.. MOQ:500 M
silicone rubber hose size:2mm -100mm(can be customized) thickness:1mm 1.5mm 2mm (can be customized) hardness:shore 65 color:white,black,red,blue,yellow,ect.. MOQ:500 M
Material:silicone rubber,NBR,NR,EPDM,FKM... Size:2mm-100mm(can be customized) Color:Black,white,red,green,blue... MOQ:500 PCS Packing:inner opp bags,carton
Material:silicone rubber,NBR,NR,EPDM,FKM... Size:2mm-100mm(can be customized) Color:Black,white,red,green,blue... MOQ:500 PCS Packing:inner opp bags,carton
Rubber Water Stop Joint
Rubber Sealing Strip
1. Material: genuine fur 2. Color: as your require. 3. Size: S/M/L/XL/XXL 4. Samples delivery: EMSA10 days after your payment. 5. OEM is available, given design and styles are welcome.
1. Material: genuine fur 2. Color:as your require. 3. Size: S/M/L/XL/XXL 4. Samples delivery: EMS7A10 days after your payment. 5. OEM is available, given design and styles are welcome.
1. Material: genuine fur 2. Color:as your require. 3. Size: S/M/L/XL/XXL 4. samples delivery: EMS7A10 days after your payment. 5. OEM is available, given design and styles are welcome.
Description of rubber water stop Rubber waterstop, made of quality SBR (styrene butadiene rubber),neoprene rubber or natural rubber, is one of the widest types for concrete structure to prevent liquid leaking in or out. Generally,designed to be cast in the concrete, rubber water stops are ideal for applications where high physical properties of rubber are required. For example, reservoirs, dams and other water retaining or excluding applications with high movements or water pressure.
Material: Rubber Diameter: 300 mm Application: Closing 300 mm Pipeline For Testing
Material: Rubber with canvas Diameter:600 mm Length: 12 m Application: Making Culvert
Material: rubber Specification: 10 x 20 mm Expansion rate: 450% Application: sealing water in concrete joint
Steel Edge Rubber Water Stop
