ANTI-SPLASH TAPE USED IN MARINE & OFFSHORE Anti-Splash tape is constructed of an aluminum or glass cloth laminate coated with a high temperature silicone adhesive. Anti-Splash tape is enhanced with a fire retardant (self-extinguishing) adhesive layer. At the same time, it is also water resistant. In addition, the maximum working temperature of tape is up to 150 °C. It is designed to prevent hazardous liquids (oil/fuel) spraying outs or leaking from tubing systems. These liquids can cause extremely dangerous situations like fires, explosions or other dangerous situations. Anti-Splash tape is widely used to wrap around tubing, hoses, fittings, flanges, and valves in the marine and offshore industry. COMMON SPECIFICATIONS IMPA Code Width (mm) Width (inch) Length (m) Roll/Box 871801 35 1.38 10 28 871802 50 1.97 10 20 871808 75 2.95 10 12 871804 100 3.94 10 12 871803 140 5.51 10 7 871804 250 9.84 10 4 871805 500 19.68 10 2 871806 1000 39.37 10 1 PHYSICAL PROPERTIES AND PERFORMED TESTS Total thickness 9.5 mils Colour Silver Max. temperature Up to 150 °C (300 °F) Pressure 300 psi Tensile strength 93.2 lbs. per inch (ASTM-882) Adhesion Above 1000 grams, 25 mm g/f Adhesion to steel 5.8 lbs. per inch (ASTM-33330) Aging properties Indefinite shelf life when properly stored INSTALLATION STEPS Three steps to install anti-splash tape on the flange. Steps for installing anti-splash tape on the flange Three steps to install anti-splash tape at the junction of the two pipes. Steps for installing anti-splash tape on pipes This picture shows the different conditions before and after using anti-splash tapes. Different conditions before and after using anti-splash tapes
Adhesive tape Product description: The products use woven fiberglass mesh as base material, after coated with acrylic acid copolymer liquid then clean cut into different width and length tape. The chemical stability and no oxygenated property of fiberglass make the tapes have superiority that other materials can not be compared with. The products with good performances, like good softness, high stickiness, easy application, it gives you the best solution for the wall problems like wall crakes, plasterboard joints, wall holes etc, and it is the ideal material for dry wall and ceiling problems.
PTFE SEALING TAPE HELPING TO SEAL THE JOINT WITHOUT HARDENING PTFE Sealing Tape is a Teflon film tape commonly used in plumbing for sealing pipe threads. The tape is sold cut to specific widths and wound on a spool, making it easy to wind around pipe threads. It has an expanded network composed of superfine fibers and joints. The combination of flexibility, high longitudinal strength, and easy deforming ability in the transverse direction makes expanded PTFE unsintered tape very suitable for packing and thread sealing applications. It is widely used by plumbers for General Water Plumbing applications. TYPES White PTFE sealing tape. (Suitable for low pressure, air, water and hydraulic applications. Particularly suited for plastic fittings.) Yellow PTFE sealing tape. (It is designed and manufactured for natural gas, propane, butane, water, oil and chemical lines.) Pink PTFE sealing tape. (Suitable for water lines, sewage lines and sprinkler systems.) Green PTFE sealing tape. (Extra processing makes this degreased tape suitable for Oxygen use.) Gold PTFE sealing tape. (Thickest and densest PTFE tape for chemical applications where high quality sealing is imperative.) PTFE tape for stainless & aluminum. (An added feature of our stainless steel thread sealing PFTE tape is the well above average thickness and density ensuring effective seals.) The white PTFE sealing tape straps around the blue shaft on the white base on a white background. White PTFE sealing tape The yellow PTFE sealing tape straps around the yellow shaft on a white background. Yellow PTFE sealing tape The pink PTFE sealing tape straps around the white shaft on a white background. Pink PTFE sealing tape The green PTFE sealing tape straps around the white shaft on a green base on a white background. Green PTFE sealing tape The gold PTFE sealing tape straps around the white shaft on a white background. Gold PTFE sealing tape The stainless and aluminum PTFE tape with gray color on a white background. PTFE tape for stainless & aluminum
Mesh size: 8*8/inch 9*9/inch Product name: Fiberglass Self Adhesive Mesh Tape For Plasterboard Jointing Place of Origin: Heiber,China Material: Fiberglass Yarn Usage: Wall Reinforcen Material Weave Type: Plain Woven Roll width : 50mm(2inch) 100mm(4inch) 150(6inch) 200(8inch) Roll length: 20m(22y) 45m(50y) 90m(100y) 153m(168y) Color: white orange red blue yellow
PTFE Packing With Chemical Resistance And Low Friction CoefficienT PTFE packing or Teflon packing is a braided packing made of high purity PTFE (poly tetrafluoroethylene) yarn without soaking any PTFE dispersion and lubrication. PTFE packing is a kind of self-lubricating, chemical inert, non-toxic and non-hazardous material. In addition, PTFE is called "king of plastic" and causes no pollution to the medium or liquid. More importantly, PTFE is known for its outstanding resistance to chemical attack, low friction coefficient, low water absorption and wide temperature tolerance (including cryogenic applications). Due to the above advantages, PTFE packing is widely used in chemical processing, food processing and pharmacy. COMMON SPECIFICATION Maximum Temperature 280 °C Pressure Rotating 1.5 MPa Reciprocating 10 MPa Valve 15 MPa Velocity 5 m/s pH 0 to 14 Density 1.41.6 g/cm3 Size Code (inch) 1/8 1/5 1/4 1/3 3/8 4/9 1/2 5/9 5/8 3/4 7/8 1 Cross Section (mm) 3 5 6.5 8 9.5 11 12.5 14 16 19 22 25 FEATURES Long lasting performance. Good flexibility and compressibility. Tough interlock braid. Superior chemical resistance. Resistant to the impact of water, steam, oil, fuel, solvent, acid and alkali. Low friction. APPLICATIONS PTFE packing is ideal for general valve and pump (including rotating, centrifugal and reciprocating pump) applications in chemical processing, food processing, cryogenic applications, industrial gas processing and hospital. White PTFE packing is applied in the valve. PTFE packing for valve
Packing for noodles, flour, dumplings.
Plastic packing labels. We can make the plastic packing labels for your cup or glass, if you are looking for it ,please contact with us.
Winding roving Filament winding roving is specially designed as reinforcements for thermoset resins used in filament winding processes. The size systems of filament winding rovings are made to achieve good compatibility with polyester, vinylester and eposy resins. It is soft, smooth and better compatible with styrene for resin impregnation. The grp is good property of water-resistance.
Metalized film which includes VMPET, VMCPP.
Industrial plastic packing film.
Industrial aluminum plastic package film.
Product name: Disposable Face Mask Feature: Nonwoven Place of Origin: Hebei, China Model Number: surgical medical Disposable MOQ: 1000pcs Certification: CE, FDA, Color: blue Size: 17.5cm*9.5cm Function: Personal Respiratory Protection Material: non woven Layer: 3ply Packing: Carton Box Product name: Disposable Face Mask Feature: Nonwoven
Product name KN95 mask Material Nonwoven fabric Electrostatic cotton Meltblown fabric Size 15.5*14.8CM(Length, width) Certifications FDA,CE Features 1. CE,FDA, Certificated 2.>95%filteration PM2.5 effect 3.
Style:off road Color:white, blue, black Material:fiber glass Standard:doc
Wuyi helmet manufactures a series of helmets constructed of either hand-laminated fiberglass or injection molded polycarbonated shell, wuyi helmet comply with the highest standards of safety and quality. XS, S, L, XL, XXL
Detailed Open - Face Helmet Description Features: a) Shell material: ABS b) Extraordinarily comfortable whole inner liner consists of light EPS foam layer and sponge lining c) Good ventilation system helps prevent fogging and also makes the helmet's interior more comfortable d) Standard, anti - scratch, anti - fog visor available e) Adjustable chin strap and standard clip f) Available in various colors and sizes g) Sizes: XS, M, S, L, XL, XXL h) Colors: black, grey, red, white, yellow, silver, burgundy, deep blue, blue, or as per customers' requests.
1. DOT approved. 2. Clear-coated, painted shell. 3. Soft, brushed nylon liner for added comfort. 4. Deluxe mesh crown pad. 5. Padded chin strap. 6. Adjustable forehead vent. 7. Removable, zippered neck curtain. 8. 3-snap bubble visor. 9. Optional cruiser style visor available. 10. Black/Flat Black styles feature a non-clear coated logo sticker for easy removal wooden case 65*27*72
Place of Origin:Hebei, China Model Number:AGFHF-1 Material:Non-woven fabric composite Color:White, Blue Application:Protection Size:Free Size Certificate:ISO CE Product name:High Quality Gowns Disposable Protective Clothing Safe Coverall Keyword:Disposable protective coverall Logo:Customized Logo Accepted Packing:International standard Feature:Breathable, water-repellent Packaging & Delivery Packaging Details:International standard package. Port: tianjin,qingdao, dalian
Nylon 66 curing tape, nylon wrapping tape, leno tape, nylon tape.
Our company specializes in producing sealings gasket sheets,thermal insulation cloths, rope, tape, level gauge glasses (plane, reflex),etc..
