Reflex Sight Glass Reflex level gauge glass is made from High Borosilicate, They are used in level gauge in boiler for water position. Reflex type one side facing the medium chamber is provided with molded grooves set at 90 degree angles. The molding process increases the resistance of the glass grooves to wear; the skin which the glass attains during molding gives it maximum smoothness and hardness. This makes it extremely resistant to the attack of boiler water Specifications * Material: borosilicate glass, aluminosilicate glass. * Max pressure: 4Mpa. * Max temperature: 430 �°C. * Grooves: one, two, three or four grooves. * Using life: more than 20 years. * Standard: The products is strictly according to the standard of DIN7081. * Accessories: Gaskets and mica sheet can also be provided together.
Transparent Gauge Glass Transparent type is also manufactured from â??extra-hardâ?? borosilicate glass. The surfaces on both sides are finely smooth and ensure optimal transparency. A) One is as same with reflex Gauge Glasses,use molds to make the semi-finished products,afterwards,ground and polish the two side to ensure optimal transparency. By this manufacturing technique,the definition isnâ??t good. B)The other manufacturing technique is made of High Borosilicate sheet of 17mm thickness, cut the glass sheet according the detailed size and polish the side face for the smooth. This manufacturing technique glass is very clear,but the goods cost is higher. Specifications * Material: borosilicate glass, aluminosilicate glass. * Max pressure: 6Mpa. * Max temperature: 430 �°C. * Using life: more than 20 years. * Standard: The products is strictly according to the standard of DIN7081. * Accessories: Gaskets and mica sheet can also be provided together.
Reflex Sight Glass Reflex level gauge glass is made from High Borosilicate, They are used in level gauge in boiler for water position. Reflex type one side facing the medium chamber is provided with molded grooves set at 90 degree angles. The molding process increases the resistance of the glass grooves to wear; the skin which the glass attains during molding gives it maximum smoothness and hardness. This makes it extremely resistant to the attack of boiler water Specifications * Material: borosilicate glass, aluminosilicate glass. * Max pressure: 4Mpa. * Max temperature: 430 �°C. * Grooves: one, two, three or four grooves. * Using life: more than 20 years. * Standard: The products is strictly according to the standard of DIN7081. * Accessories: Gaskets and mica sheet can also be provided together.
We can provide all kinds level gauge glass according DIN7081 both the reflex and transparent type.
We are specialized manufacturer of different kinds of sight glass ,gauge glass and related gasket in China.our products have been exported to Pakistan, Poland, Croatia, Malaysia, USA, Syria, Vietnam, Netherlands, UK, Bulgaria and so on. And we are keeping the long term cooperation relationship with our clients Our main product: 1) Reflex type Gauge glass 2)Flat type Gauge glass 3)Round type sight glass 4)Glass tube 5)Gasket for Gauge glass & sight glass 1)Gauge glass sizeï¼? 340 x 34(30) x 17mm; 320 x 34(30) x 17mm; 280 x 34(30) x 17mm; 250 x 34(30) x 17mm; 218 x 34(30) x 17mm; 190 x 34(30) x 17mm; 165 x 34(30) x 17mm; 140 x 34(30) x 17mm; 115 x 34(30) x 17mm The other size is optional or according to the requirements of customers. 2)Round sight glass size: Diameter: 30~350mm, thickness:10~30mm The other size is optional or according to the requirements of customers 3)Glass tube size: Outside diameter: from 3mm to 315mm.Wall thickness: from 1.0mm to 10mm.Length: from 5mm to 2200mm. Normal length: 1000mm-1800mm Such as print the words on the products, the size, and so on.
Industrial plastic packing film.
Industrial aluminum plastic package film.
Metalized film which includes VMPET, VMCPP.
We produce polyester spiral belt made from first-class monofilament, in reference to finland standard, has the characteristics of stable property and long work time. Advantages of polyester spiral belt : Flat surface, not easily cracked Good air permeability Stable property against heat and moisture Low thermal shrinking Less elongation at heat Long lifespan
Anti-static conveyor belt
V-belt Characteristics: 1) transmission power 30% higher than common v-belts under the same conditions 2) with tight transmission systems, these belts occupy a space 25% smaller than common v-belts under the same conditions 3) flat and soft belts are suitable not only for transmission of small pulleys but also for high-speed transmission (40m/s) 4) these belts have slight vibration, low heat divergence and steady working 5) anti-heat, anti-oil, low elongation and long usage lifespan Outer packing: packed in paper cartons
Conveyer belt
China State Standard: GB-T11544-1997 In carton 320*320*620mm. 500-700 pieces in one carton.
Conveyor belt mesh Anping jinshanglian wire mesh factory produces a variety of conveyer belt wire mesh in different structures. Some designs of wire mesh conveyer belt as follows for your reference. Custom design available. Designs reference of wire mesh conveyer belt Other specifications and size can be produced as perbuyers'requirements
Name:Stainless steel Filter element Cartridge Material:SS304,316,316L Diameter:10-1000mm Length:10-2000mm Filtration Accuracy:1-200um Connector patterns:Flange,Thread,Tri-clamp and customize Lead time:7-10 days MOQ:10pcs
Snake Spring Coupling Housing is suitable for coaxial axis drive shaft system, with certain compensation performance of angular, radial and axial offset between two shafts, operating ambient temperature -30 ~ 150C, transmission torque 45-800000N â?¢ m. The Basic Parameters And Main Dimensions Of The Snake - Shaped Yellow Coupling mm Model Nominal Torque Tn N m Allowable speed  [n] r/min Shaft hole diameter  d mm Shaft hole length L mm Overall length Lo mm L, mm D mm Clearance  C mm inertia moment  I kg. m2 Weight kg JSA1 45 18 28 47 97 66 95 0. 0014 1.91 JSA2 140 4500 22 35 68 105 0. 0022 2. 59 JSA3 224 25 42 50 103 70 115 0. 0033 3. 36 JSA4 400 32 50 60 123 80 130 3 0. 0073 5. 45 JSA5 630 4350 40 56 63 129 92 150 0.0119 7. 26 JSA6 900 4125 48 65 76 155 95 160 0. 0185 10. 44 JSA7 1800 55 80 89 181 116 190 0. 0451 17. 70 JSA8 3150 OvvU 65 95 98 199 122 210 0. 0787 25. 42 JSA9 5600 2000 75 110 120 245 155 250 0. 1780 42. 22 JSA10 8000 2250 80 120 127 259 162 270 0. 2700 54. 45 JSA11 12500 2025 90 140 149 304 192 310 0.5140 81.27 JSA12 18000 1800 110 170 162 330 195 346 0. 9890 121.00 JSA13 25000 1650 120 200 184 374 201 384 1. 8500 178. 00 JSA14 35500 1500 140 200 184 374 271 450 3. 4900 234 JSA15 50000 1350 160 240 198 402 279 500 6 5. 8200 317 JSA16 63000 1225 180 280 216 438 304 566 10. 4000 448 JSA17 90000 1100 200 300 239 484 322 630 18. 3000 620 JSA18 125000 1050 240 320 260 526
WGP  Brake Wheel Drum Gear� Coupling Type Nominal Torque  TnKNm Allowable Speed  [n] r/mi n Shaft Hole Diameter d dz mm Shaft Hole Length  L % D D, d2 B N C C, c2 Inertia Moment kg m~ Weight� kg Y J, Z, WGP1 0. 71 4000 12 -42 32 -112 315 122 98 60 58 38 3/30 19/29 12/18 0. 008 5.7 WGP2 1.25 4000 22 -56 52 -112 315 150 118 77 68 38 3/20 23/29 16 0. 02 10 WGP3 2.5 3550 22 -63 52 -142 355 170 140 90 80 49 3/33 23/36 16/25 0. 05 17 WGP4 4.5 2500 30 -80 82 -172 400450500 200 160 112 90 45 3/13 29/41 17 0. 1 26 WGP5 7. 1 2500 30 -90 82 -172 225 180 128 100 45 3/23 29/41 19 0. 17 35 WGP6 10 2000 32 -100 82 -212 560630710 245 200 145 112 44 5/35 28/48 20 0.3 52 WGP7 14 1700 32 -110 82 -212 560630710 272 230 160 122 44 5/45 38/48 20 0.5 68 WGP8 20 1700 55 -125 107-212 560630710 290 245 176 136 44 5/29 38/48 20/34 0.7 80 WGP9 25 1600 65 -140 107-252 630710800 315 265 190 140 58 5 38/53 28/38 1 107 WGP10 40 1600 75 -160 132-302 630710800 355 300 225 165 58 5/28 43/63 20/38 1.8 160 WGP11 56 1400 80 -180 167-302 710� 800� 900 412 345 256 180 58 8/15 51/66 32 3.7 215 WGP12 80 1400 120-200 167-352 710� 800� 900 440 375 288 207 58 8 51/76 32/45 6.4 305 WGP13 112 1400 140-220 202-352 800900 490 425 320 235 58 8 56/76 32/38 11 395 WGP14 160 1200 160-260 242-410 9001000 545 462 362 265 65 10 68/78 10/32 18 530 Note: 1. The weight and moment of inertia in the table are not calculated for the brake disc, and their values are shown in Table 2. 2. aluminum investment casting , impregnated aluminum casting , investment aluminum casting , international aluminum casting , ideas for aluminum casting , is aluminum casting , how to build a casting deck in an aluminum boat , casting aluminum in plaster , what is aluminum die casting , casting aluminum in silicone , casting aluminum in sand , aluminum casting jobs
GCL Drum Gear Coupling Suitable for connecting two horizontal coaxial axis drive shaft system, with a certain Angle to compensate the relative offset performance of two shafts drum tooth coupling, working environment temperature -20 ~ +80C, transmission nominal torque is 0. 4-4500KN-m  WGP  Brake Wheel Drum Gear  Coupling Type Nominal Torque� TnKNã?»m Allowable Speed  [n] r/mi n Shaft Hole Diameter d dz mm Shaft Hole Length L % D D, d2 B N C C, c2 Inertia Moment kg m~ Weight� kg Y J, Z, WGP1 0. 71 4000 12 -42 32 -112 315 122 98 60 58 38 3/30 19/29 12/18 0. 008 5.7 WGP2 1.25 4000 22 -56 52 -112 315 150 118 77 68 38 3/20 23/29 16 0. 02 10 WGP3 2.5 3550 22 -63 52 -142 355 170 140 90 80 49 3/33 23/36 16/25 0. 05 17 WGP4 4.5 2500 30 -80 82 -172 400450500 200 160 112 90 45 3/13 29/41 17 0. 1 26 WGP5 7. 1 2500 30 -90 82 -172 225 180 128 100 45 3/23 29/41 19 0. 17 35 WGP6 10 2000 32 -100 82 -212 560630710 245 200 145 112 44 5/35 28/48 20 0.3 52 WGP7 14 1700 32 -110 82 -212 560630710 272 230 160 122 44 5/45 38/48 20 0.5 68 WGP8 20 1700 55 -125 107-212 560630710 290 245 176 136 44 5/29 38/48 20/34 0.7 80 WGP9 25 1600 65 -140 107-252 630710800 315 265 190 140 58 5 38/53 28/38 1 107 WGP10 40 1600 75 -160 132-302 630710800 355 300 225 165 58 5/28 43/63 20/38 1.8 160 WGP11 56 1400 80 -180 167-302 710� 800� 900 412 345 256 180 58 8/15 51/66 32 3.7 215 WGP12 80 1400 120-200 167-352 710� 800� 900 440 375 288 207 58 8 51/76 32/45 6.4 305 WGP13 112 1400 140-220 202-352 800900 490 425 320 235 58 8 56/76 32/38 11 395 WGP14 160 1200 160-260 242-410 9001000 545 462 362 265 65 10 68/78 10/32 18 530 Note: 1. The weight and moment of inertia in the table are not calculated for the brake disc, and their values are shown in Table 2. 2. how to make green sand for aluminum casting , aluminum casting ideas , aluminum casting ingots , aluminum casting impregnation , aluminum casting in plaster , aluminum cast iron , aluminum cast iron pot , aluminum cast iron patio furniture , aluminum cast iron molds , aluminum cast in sand
Material: ss304L SS316L Wire diameter: 0.53mm inside diameter: 2.75mm outside diameter: 3.81mm Advantage: fit to both right and left hands Function safety and protection Application: cutting/Butcher
1- The Hexagonal wire netting is also named hexagonal wire netting, chicken wire netting, chicken wire, chicken mesh and chicken wire mesh. 2- Hexagonal wire netting material: >Material:low-carbon steel wire ,stainless steel wire >Weaving:normal twist,reverse twist.galvanized before or after weaving 3.Finishes Treatment Galvanized after weaving ,galvanized before weaving , PVC coated galvanized Hot-dipped galvanized Electro galvanized Application Hexagonal wire netting is used for feeding chicken, ducks, gooses, rabbits and the fence of zoo. Also used in machinery protection, fences for road, railway, etc. It can be made into box to hold stones and sand to protect the bank, hillside, bridge and other related civil engineering against the flood.
