Energy saving lamps Featues: 1)wattages :7w, 9w, 13w, 15w, 18w, 20w, 22w, 24w, 26w 2)base : iron/aluminium e27, e27, e14, b22 3)voltage : 110v-130v / 220v-240v 4)average life : 10, 000 hours 5)up to 80% energy saving 6)excellent color rendering, excellent light distribution 7)flicker free instant start 8)universal buring position 9)tube : 9mm diameter, 12mmdiameter 10) rendering index : 82 11)most favorable for office, home or inside of pendant lamp 12)safe and easy to use 13)protect eyes 14)tricolor fluorescent powder 15)heat insulated configuration 16)pc and pbt high temperature burn resistant composition 17)the component and circuitry input power is strictly inspected and filtrated. 18)we have a very wide range of u energy saving lamp products with diferent sizes and watts, such as 2u, 3u, 4u, 6u and 8u.So it is very convenient for you to choose. Packing : 1) inner packing : 1pc/box color box 2)outer packing : 50 pcs/carton 3) according to the clientsí» resquest
Lan cable, optic fiber cable, power cable, other chemical.
Air filter, oil filter, fuel filter, cabin filter, fuel water separator.
2017 high quality new 2g cellphone gsm repeater 900mhz mobile phone gsm900 signal repeater cellphone signals booster amplifier Cellular gsm repeater 900mhz booster * model AT980 * used in mobile 2g gsm signal amplifier * 1 year guarantee after shipping * max. square meters: about 50-150 sq.m Package including: * 1 pc of AT980 repeater * 1 pc of 9 unit yagi antenna * 1 pc of indoor ceiling antenna * 1 pc of 5v2a eu plug (or please inform us plug type: eu/ek/us/au) * 1 pc of cable (about 9 to 10 meters) Specification: * Frequency range: uplink (890~915mhz); downlink (935~960mhz) * Gain: uplink (60+3db); downlink (65+3db) * Power: -70 ~ -40 dbm / FA (1.23mhz) * Max. output power: 23dbm + 3dbm total power * Yagi antenna: 13db / Indoor ceiling antenna: 5db * Noise figure: about 4db * Seclusion: > 70db * Power supply: ac110~220v, 45~55Hz * Compact design: indoor use NOTE: * It is for one room use, or you can buy splitter and extra ceiling antennas for more rooms using. * Make sure there is good signal ourside or on the roof to gain signal from signal tower. * Please check the installing diagram and install it correctly. if there is any problem, please kindly contact with us.
2017 high quality repetidor de sinal de celular CDMA 850 mhz celular repeater 850mhz mobile phone cdma850 signal booster amplifier Repetidor de sinal de celular CDMA 850 mhz * model cdma850 * used in cell phone cdma850mhz signal amplifier * 1 year guarantee after shipping * max. square meters: about 50-150 sq.m Package including: * 1 pc of cdma850 * 1 pc of 9 unit yagi antenna * 1 pc of indoor ceiling antenna * 1 pc of 5v2a eu plug (or please inform us plug type: eu/ek/us/au) * 1 pc of cable (about 9 to 10 meters) Specification: * Frequency range: uplink (824~849mhz); downlink (869~894mhz) * Gain: uplink (60+3db); downlink (65+3db) * Power: -70 ~ -40 dbm / FA (1.23mhz) * Max. output power: 23dbm + 3dbm total power * Yagi antenna: 13db / Indoor ceiling antenna: 5db * Noise figure: about 4db * Seclusion: > 70db * Power supply: ac110~220v, 45~55Hz * Compact design: indoor use NOTE: * It is for one room use, or you can buy splitter and extra ceiling antennas for more rooms using. * Make sure there is good signal ourside or on the roof to gain signal from signal tower. * Please check the installing diagram and install it correctly.
YT Nano-fluorescent self-luminous cat eye road stud delineator with glass beads Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF10 Product name YT Nano-fluorescent self-luminous cat eye road stud delineator with glass beads Material ABS+glass beads+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 110mmÃ?110mmÃ?66mm Weight 138g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF10 (2)YF10 (3)YF10 (5)YF10 (4)YF10 (1)YF10 (1)YF10 (3)YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT round circle self-fluorescent double sided road stud with reflective film Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF05 Product name YT round circle self-fluorescent double sided road stud with reflective film Material ABS+reflective film+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size Ï?100mmÃ?11mm Weight 88g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF05 (6)YF05 (2)YF05 (5)YF05 (6)YF05 (1)YF05 YF05 (2)YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT Factory Energy Storage Self-luminous Highway Road Reflective Delineator as Traffic Signs Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF18 Product name YT Factory Energy Storage Self-luminous Highway Road Reflective Delineator as Traffic Signs Material Aluminium+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 150mmÃ?150mm Weight 48g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF18 (4)_YF18YF18__ YF18 (3)YF18 (2) YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT transparent self-luminous ABS road stud delineator as a traffic signal Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF14 Product name YT transparent self-luminous ABS road stud delineator as a traffic signal Material ABS+PMMA+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 180mmÃ?48mmÃ?40mm Weight 120g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF14 (6)_YF14 (1)_YF14 (6)YF14 (1)YF14 (1)_YF14 (1)YF14 (2)YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT hangzhou energy storaged square self-luminous road stud with cat eyes Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF01 Product name YT hangzhou energy storaged square self-luminous road stud with cat eyes Material ABS+glass beads+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 130mmÃ?110mmÃ?15mm Weight 150g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF01 YF01 YF01 (4)YF01 (1)YF01 (5)YF01 (5)YF01 (3)YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT yellow shell self-luminous rectangle reflector road studs with cat eye Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF03 Product name YT yellow shell self-luminous rectangle reflector road studs with cat eye Material ABS+glass beads+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 130mmÃ?110mmÃ?15mm Weight 165g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance yf03_YF03 (1)YF03 (9)YF03(8)YF03 (7)YF03 (4)YF04 YF03 (3)_YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT self-luminous ABS plastic reflective road stud with reflective panels Product Code YF23 Product name YT self-luminous ABS plastic reflective road stud with reflective panels Material ABS+PMMA+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 100mmÃ?100mmÃ?20mm Weight 110g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance
Product Code YRG41 Product name China Supplier High Reflective Trapezoid Plastic 213 Glass Beads Reflector for truck Material ABS base+glass beads Color white/ yellow/ red/ green/ black Size 213 beads Weight 34g Application reflective panel, road stud, delineator, speed humb, etc, Feature high weight resistance, colorful, antioxidant, durable, 360° high reflectivity Payment terms T/T, L/C, Western union, Trade Assurance Sample One free sample but freight is paid by customers
Product Code YRG46 Product name Plastic solar square reflectors for road stud Material ABS base+PS/PMMA reflective panel Color white/ yellow/ red Size 95.4mmÃ?28.2mm Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance
Product Code YRG47 Product name YT High Quality Truck Reflector Reflective Panel for Safe Material ABS base+PS/PMMA reflective panel Color white/ yellow/ red Size 87.2mmÃ?28.7mm Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance
Product Code YRG34 Product name Rectangle roadway beads safety road Reflector for highway Material ABS base+glass beads Color white/ yellow/ red/ green/ black Size 120mmÃ?80mm,192 beads Weight 48g Application reflective panel, road stud, delineator, speed humb, etc, Feature high weight resistance, colorful, antioxidant, durable, 360° high reflectivity Payment terms T/T, L/C, Western union, Trade Assurance
Product Code YRG35 Product name China Supplier High Rectangle Reflective Panel Plastic with 366 Glass Beads Material ABS base+glass beads Color white/ yellow/ red/ green/ black Size 120mmÃ?80mm, 366 beads Weight 62g Application reflective panel, road stud, delineator, speed humb, etc, Feature high weight resistance, colorful, antioxidant, durable, 360° high reflectivity Payment terms T/T, L/C, Western union, Trade Assurance
Product Code YRG40 Product name China Supplier High Reflective Trapezoid Plastic 166 Glass Beads Reflector in Truck Material ABS base+glass beads Color white/ yellow/ red/ green/ black Size 166 beads Weight 27g Application reflective panel, road stud, delineator, speed humb, etc, Feature high weight resistance, colorful, antioxidant, durable, 360° high reflectivity Payment terms T/T, L/C, Western union, Trade Assurance Sample One free sample but freight is paid by customers
Material ABS base+glass beads Color white/ yellow/ red/ green/ black Size 35 beads Weight 6g Application reflective panel, road stud, delineator, speed humb, etc, Feature high weight resistance, colorful, antioxidant, durable, 360° high reflectivity Payment terms T/T, L/C, Western union, Trade Assurance
Material ABS base+glass beads Color white/ yellow/ red/ green/ black Size 46 beads Weight 11g Application reflective panel, road stud, delineator, speed humb, etc, Feature high weight resistance, colorful, antioxidant, durable, 360° high reflectivity Payment terms T/T, L/C, Western union, Trade Assurance
