Find Verified Electrical Household Other Goods Components Suppliers, Manufacturers and Wholesalers

EVT threaded conduit body for rigid conduit or IMC allows access for general inspection, maintenance and wire pulling. Conduit body saves time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. Its powder-coated finish and neoprene gasket ensure a weatherproof installation.

EMT is short for Electrical Metallic Tubing. EMT tube, also commonly called thin-wall, is a steel raceway of circular cross section, which is unthreaded, and nominally 10² long. EVT EMT conduit is UL listed with UL file number E476073. EMT electrical is manufactured according to UL 797, CSA C22.2 NO.83.1 and ANSI C80.3, Electrical Metallic Tubing â?? Steel.

EMT Tubing is available in trade sizes 1/2 through 4. The steel conduit is galvanized both inside and outside for corrosion protection. EMT pipe is commonly installed by use of set-screw or compression type connectors and couplings.

EVT EMT connector set screw type is UL listed with UL file number E343475 that is for the EMT fittings manufactured according to UL 514B and C22.2 No. 18.3-12 Conduit, Tubing, and Cable Fittings

EMT straight connector is used in dry locations to bond EMT electrical conduit to an electrical junction box or enclosure. EVT can provide set screw type EMT connectors in zinc, steel and aluminum that can meet all your requirements in different markets.

The EMT set screw connector provides concrete tight protection when taped and is available in trade sizes 1/2" through 4". EMT connector set screw type sizes 2-1/2" to 4" is also suitable for RMC and IMC Conduits

Description
The Trusted Versatile Field Termination Assembly (VFTA) is designed to act as the main interface between field devices associated with the detection and suppression of fire and gas hazards, and the Trusted TMR Zone Interface Module T8448.
Each channel of the VFTA is configurable to enable a variety of field devices to be connected. These include devices generating both analogue and digital input signals, and output devices requiring a digital signal at up to 40V dc.
The 40 channels are arranged in five power groups each comprising eight identical channels. Each power group is supplied from dual 24V dc feeds which are commoned via diodes on the VFTA. The supply is then fed to each channel within the group.
The supply voltage to the field is fed via a 315mA fuse. The incoming signal (0-20mA) from the field device is fed through a 50mA fuse which effectively limits the input signal. The voltage developed across an input 250R resistor (high precision 0.1%) is used by the input module to detect the field device status.
The cable linking the 40 channels on the input module to the VFTA is terminated at five 10-way connectors. The dual 24V dc power supplies are connected to the VFTA via five 4-way connectors. Forty 3-way connectors are used for the field loops.
The VFTA is designed to be mounted on either of the TS32 or TS35 DIN rails in the horizontal or vertical positions as required.

Features
Forty input channels per VFTA
Industry standard field device connections (3-wire)
Standard DIN rail compatibility
Simple configuration using plug-in fuses
Simple installation and connection
24V dc operation
Fused field power supply per channel
Designed for use with current sinking and sourcing field devices

Ce approved regulated; power adapter; for cctv cameras(s1220d)

Descrition:
The cctv power supply is primarily designed for wuf-gv, ptz and camera of cctv system. It's also used for access, building/house control, intrude alarm and other light-current device.

12v 2a cctv surveillance security camera power adapter
With ce, iec60950, rohs, etc approval
Protection within auto recovery: overload/overcurrent/short-circuit
No load standby power ¡¨¹0.5w
Efficiency: 88 % min.
Warranty: 2 years

Individual dc power supply features
1 12v dc 2 amp output
2 100-240 vac 50/60hz input
3 uses 2.1mm plug - universal standard for cctv and ip cameras
4 works with pre-made siamese cctv cables
5 works with spools of rg59 siamese cable with pt-4 power leads
6 switching power supply
7 fully regulated





Dc plug:5.5*2.1*12mm

5.5*2.1mm CCTV Male DC Power Connector with Screw Terminal (PC102)

Description:
5.5*2.1mm male Power Plug with Built-in Screw
Male DC plug to terminal screws
This CCTV camera power connector is from one power connector end DC jack male to another end terminal for CCTV camera connection.
Net Weight: 6g/piece





Net Weight: 6g/piece
5.5*2.1mm male Power Plug with Built-in Screw

sion test of gb18285-2005 & hj/t289-2006.
Chinese or english menu for easy operation
Lcd screen
Automatic zero resetting
High-brightness digital display, automatic linear data process
Automatic calculation and display of air-fuel ratio |Ë
Equipped with rotation speed and oil temperature measure ports

460mm*240mm*230mm


Net weight: 8.5kg
Package dimension:
Carton:595mm*310mm*345mm

The busway is used for the electricity transmission from the electric power transformer to the main distribution screen or from the main distribution screen with a current transmission capacity of 3000a.


Product details

The main forklift we serviced are the chinese brand forklifts, including heli, hc, tailift, baoli, dalian, jac and so on. We also do the oem forklift spare parts made by customer's samples.


Exprot standard packing.

The main forklift we serviced are the chinese brand forklifts, including heli, hc, tailift, baoli, dalian, jac and so on. We also do the oem forklift spare parts made by customers samples.


Exporting standard packing

Shear beam load cell
Simple to install, easy to use
Good interchangeability
Used for various ultrathinelectronic truck scale, one-track crane scale, hopper scale



0.05t~10t

Bs31 conduit

Bs31 conduit, with thread on both ends-galvanized steel

3.75m length, thread on both ends

Insulator

Different types of insulator, arrester, dofc, circuit breaker and line accessories, as per bs, ansi, din, as standards.