Pond Filter Size:500*300*380mm How it works? 1. Water inlet: untreated pond water enters the filter through the water inlet. 2. Sewage outlet: the dirt inside the filter is cleaned and discharged out of the barrel. 3. Settling area: under the action of gravity, the settled garbage is concentrated here. 4. Brush filtration: When the unfiltered water flows through the brush, the brush array can slow down the flow rate of the water, so that heavier particles will slowly settle down, and filter out large particles of garbage, and can easily hang the film brush The nitrifying bacteria will convert the ammonia produced by fish decomposing into nitrite. 5. Filter Mat: between its dense pores and softness, it is the most suitable hotbed for cultivating nitrifying bacteria. It can effectively convert nitrite into nitrate without blocking or deforming. It can be reused after cleaning. 6. Biochemical filtration: The bacteria house in the filter basket can help cultivate various anaerobic bacteria, which will convert the nitrate in the water body into nitrogen for sublimation. 7. UV sterilization and filtration: under UV-C ultraviolet radiation with a wavelength of 253.7nm, when the water body flows through the UV lamp, the bacteria, viruses and algae free in the water body will be killed in a short time. 8. Water outlet: the filtered pond water returns to the pond through the water outlet.
Spin down type sediment filter (pre-filter), with self washing vent valve, brass head, 1/2", 3/4", 1" NPT port options, and 40 micron stainless steel filter. Specification STRUCTURE Pre-filter / Spin down water filter is suitable for wholehouse water treatment, works as pre-filter for all water consumption of a home. It is made of brass cap with standard in-let and out-let options of 1/2", 3/4", and 1" NTP threads with SUS 316 stainless steel filter and clear housing, with a vent valve on its bottom for self-washing purpose. FEATURES Small size Visible housing Easy to install to standard pipes Self washing, no filter replacement cost High flow rate MAIN TECHICAL SPECIFICATION Connection: 3/4", 1/2" and 1" threaded NPT Maximum operating Pressure: 0.8MPa (116psi) Working temperature: 5-40 (41-140) Maximum flow rate: 2.6-4.2m³/h Measurements: 60*90*200mm Pore size: 40-60 micron TYPICAL APPLICATIONS Pre-filter for wholehouse water supply Pre-filter for solar water heater Pre-filter for well water and river water
It can be used as an antioxidant, usually combined with VC, CE and PG. It can also be used in beer brewing as a stabilizer and in wine production as a clarifiant.
Sodium Lauroyl Sarcosinate. Aqua Sodium Lauroyl Sarcosinate is an amino-acid based anionic surfactant, moisturizing- and conditioning agent. It is a sodium N-lauroyl methyl glycinate which offers mild, smooth and comfortable skin feeling as well as can form rich and stable cream foams. It adsorbs upon hair, lessens accumulation of static charge and improves combability of hair. Moreover, it can be absorbed easily in skin and is suitable to formulate into dermal cleaning agents. It is a non-irritant and biodegradable grade. Aqua Sodium Lauroyl Sarcosinate is used in skin- and hair care applications.
Sodium Lauroyl Sarcosinate is a surfactant produced from amino acid sarcosine. It also acts as a moisturizing- and conditioning agent which imparts mild, smooth and comfortable skin feeling as well as can form rich and stable cream foams. It adsorbs upon hair, lessens accumulation of static charge and improves combability of hair. Moreover, it can be adsorbed easily upon the skin surface and is suitable to formulate into dermal cleaning agents. It is a non-irritant and biodegradable grade. Sodium Lauroyl Sarcosinate finds application in formulation of skinand hair care products.
Behenamidopropyl PG-Dimonium Chloride acts as an excellent cationic conditioner and antimicrobial agent. It also acts as an anti-static agent to condition, detangle and improve wet and dry combability. It is easy to absorb and offers smoothness, shine, moisturization and silky feeling. Behenamidopropyl PG-Dimonium Chloride is compatible with various types of surfactants and avoids defoaming, viscosity loss and sedimentation. Recommended for shampoos, hair conditioners, facial cleansers and shower cleaners.
Obtained through the bio-fermentation of glycerin which is hydrolyzed from natural palm oil. It's a novel and cost-effective solvent and extractant as well as a great humectant and preservative booster. It can be widely used in various products such as creams, lotions, serums, facial masks, foundations, etc.
tannic acid for industrial applicaitons such as leathering
CM series GAC filter is made of catalytic activated carbon, it can remove chloramine and hydrogen sulfide from water effectively. It's also good at removing disinfection by-products such as chloroform and trihalomethanes (THMs). Specification CM series GAC granular carbon filter is made of catalytic activated carbon, it removes chloramine and hydrogen sulfide effectively, also good at removal of disinfection by-product like chloroform and THMs. Suitable for areas using surface water as source water and chloramine as a disinfectant. Features NSF Certified catalytic activated carbon High effect on chloramines, sulfide,and trihalomethane Low turbidity from carbon dust Rapid dechlorination Technical data Maximum temperature: 140F (60C) Maximum flow rate per 10: 1.06gpm (4L/min) Caution: Flush for 30 seconds before use. Do not exceed the maximum flow rate to maintain sufficient contact time.
Cylinder bore 320 mm Piston stroke 480 mm Rated speed 600 rpm Mean effective pressure 2.53 MPa Mean piston speed 9.6 m/s Rated output 2665-4400 kw SFOC 183 g/kWh SLOC 0.8 g/kWh 1.Outstanding fuel economy and the emission compliant with IMO Tier II. 2.Adopt the modular design and engine block suspension structure, which improve the rigidity of engine with easy maintenance and good reliability 3.The turbocharger can be arranged at front end and back end and the power can be taken out from the front end and back end, which can satisfy various requirement. 4.can be operated on 380cSt/50â?? HFO for long time 5.Be of energy conservation and environmental protection and medium price, more than 200 sets of sold engines with the longest running time more than 35000hours. 6.Application: main propulsion with fixed pitch propeller or adjustable propeller, marine generating sets with electric propulsion system, marine generating sets and engineering equipment such as dredge pump, water pump and hydraulic system, and etc.
Melt blown (spun polypropylene) filters with 50% lower pressure drop and long service life. Specification STRUCTURE Depth melt-blown filter cartridge is made of pure polypropylene, by phase-in changes on the precision from inside to outside, it maximizes the dirt holding capacity and minimizes the pressure loss. Results in very long service time. FEATURES 1 High Dirt Hoding Capacity 2 50% Lower Pressure Drop 3 Long Service Life TYPICAL APPLICATION 1 Water Treatment 2 Corrosive Liquid Filtration 3 Food Industrial
Carbon block filter made of NSF certified coconut carbons. Specification POU- point of use This series of filters can be used for drinking, municipal, and industrial water and liquids filtration, it is designed for Direct-food-related applications, to treat the water intended for direct consumption (drinking and cooking). Features 1 NSF certified coconut based granular activated carbon 2 High efficiently bound by food grade binder 3 95% initial dechlorination 4 Long service life 5 Low pressure drop 6 All virgin raw material Technical data 1 Maximum temperature: 140 degrees 2 Maximum flow rate per 10 inch: 1.06gpm (4L/min) 3 Maximum replacement : 14.5psi (1.0bar) 4 Caution: Flush for 30 seconds before use. Do not exceed the maximum flow rate to maintain sufficient contact time.
String wound filter made of pure material and JIS micron rates. STRUCTURE String wound filter cartridge consists of multi-hole frames wound closely with textile fibers. Diverse kinds of filtering precision can be realized by controlling the winding density. As the outer bore diameter is larger than the inner one, the filter cartridges have a good deep-level filtering capability. JPL series has straight multi-hole from surface to the inner core, which performance a maximum dirt holding capacity and lowest pressure drop. FEATURES 1 Through holes create real depth filtration 2 Large flow and small pressure loss 3 High dirt holding capacity and long service life. 4 Pure material MAIN TECHICAL SPECIFICATION 1 Dimension: Outer diameter: 63�±1mm, Inner diameter:28mm or 30mm 2 Maximum operating Pressure: 0.5MPa 3 Temperature: 60 degrees TYPICAL APPLICATIONS 1 Industrial liquid filtration (High quality PCB & Electro-plating) 2 Strong acid and alkali liquid 3 Syntheti resin & paint 4 Pre - RO 5 Other applications
SF patented string wound high flow type, with OD 6.22" and 1 to 100 micron range. STRUCTURE High Flow string wound filter is patented in China by SF Filter. Using multi-holes to make the filter 9 times dirt holding capacity as ordinary string wound cartridges. With O-rings to avoid bypass. 3 grades are available. HFA, HFB and HFC can meet most pre-filtration requirements. The end cap and dimensions can be customized to meet certain requirments. FEATURES 1 High dirt holding capacity, long service life 2 No bypass 3 Easy replacement 4 Through holes create real depth filtration 5 High flow rate and low pressure loss 6 Pure, clean and washed material which is same as NSF approved type (HFA). 7 Pure material, suitable for strong corrosion liquids (HFB). 8 Common material, allows lower price (HFC). MAIN TECHICAL SPECIFICATION 1 Dimension: Outer diameter :158�±1mm, Inner diameter:70mm 2 Maximum operating Pressure: 0.5MPa 3 Maximum operating Pressure Drop: 0.2MPa 4 Temperature: 60 degrees TYPICAL APPLICATIONS 1 Food & Beverage (HFA) 2 Pharmacy & Hospital (HFA) 3 Pre - RO (HF A & HFB) 4 Industrial liquid filtration 5 Other applications
NSF certified string wound filter made of washed string, JIS standard micron rates. Swirling flow. STRUCTURE String wound filter cartridge consists of multi-hole frames wound closely with textile fibers. Diverse kinds of filtering precision can be realized by controlling the winding density. As the outer bore diameter is larger than the inner one, the filter cartridges have a good deep-level filtering capability. JP series has straight multi-holes from surface to the inner core, allowing maximum dirt holding capacity and lowest pressure drop. The holes are now with slope design (25micron -200micron), creating swirling flow in the filter housing, which prevent particles from settling at the bottom and provide more benifits to the water. The whole JP washed series filters has been certified by NSF to the standard of NSF/ANSI 42. FEATURES 1 NSF listed for ANSI 42 standard 2 Through slope holes create real depth filtration and swirling flow 3 Large flow and small pressure loss 4 High dirt holding capacity and long service life. 5 Pure, clean and washed material, no silicon, no fluorescence agent and no oil. MAIN TECHICAL SPECIFICATION 1 Dimension: Outer diameter: 63�±1mm, Inner diameter :28mm or 30mm 2 Maximum operating Pressure: 0.5MPa (72.5psi) 3 Temperature: 60 degrees (140 degrees fahrenheit ) TYPICAL APPLICATIONS 1 Residential water filter 2 Food & Beverage 3 Pre - RO 4 Pharmacy & Hospital 5 High quality industrial liquid filtration 6 Other applications
M2.184.1111 Original Cylinder Valve MEBH-4/2-QS-6-SA For Heidelberg Offset Spare Parts
Anchor Catalyst Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust, and SO2, HCL, NOx, and Dioxins at the same time. We are the Leading manufacturer of hot gas ceramic fiber filter in China Product Features 1.Resistant to corrosion and to the acid attack, Excellent chemical resistance 2.High filtration velocities 3.Withstand temperatures of up to 1,000C 4.Total resistance to sparks, Non flammable 5. High air permeability 6. High filtration efficiency- Typically 99.9% 7. Can filter dust larger than 1 micron 8. Easy installation 9. Can be used for 5-10 years without replacement 10. Multi-Pollutant Control - Control PM, SO2, HCl, NOx, Dioxins, HAPS With One Single System Typical Application Glass furnaces Biomass boiler Thermal power platnt Chemical Industry Waste incineration Non-ferrous metal smelting furnaces Product recovery Cement kiln Size Available 60mm O/D * 1500mm Long 150mm O/D * 3000mm Long 150mm O/D * 300mm Long
Anchor Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust. We are the Leading manufacturer of hot gas ceramic fiber filter in China Product Features 1.Resistant to corrosion and to the acid attack, Excellent chemical resistance 2.High filtration velocities 3.Withstand temperatures of up to 1,000�°C 4.Total resistance to sparks, Non flammable 5. High air permeability 6. High filtration efficiency- Typically 99.9% 7. Can filter dust larger than 1 micron 8. Easy installation 9. Can be used for 5-10 years without replacement Typical Application Glass furnaces Biomass boiler Thermal power platnt Chemical Industry Waste incineration Non-ferrous metal smelting furnaces Product recovery Cement kiln Size Available 60mm O/D * 1500mm Long 150mm O/D * 3000mm Long 150mm O/D * 300mm Long
Anchor Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust. We are the Leading manufacturer of hot gas ceramic fiber filter in China Product Features 1.Resistant to corrosion and to the acid attack, Excellent chemical resistance 2.High filtration velocities 3.Withstand temperatures of up to 1,000C 4.Total resistance to sparks, Non flammable 5. High air permeability 6. High filtration efficiency- Typically 99.9% 7. Can filter dust larger than 1 micron 8. Easy installation 9. Can be used for 5-10 years without replacement Typical Application Glass furnaces Biomass boiler Thermal power platnt Chemical Industry Waste incineration Non-ferrous metal smelting furnaces Product recovery Cement kiln Size Available 60mm O/D * 1500mm Long 150mm O/D * 3000mm Long 150mm O/D * 300mm Long
Iso 9001 Oem Manufacturer good price water pump body casting Product Detail: Product: Pump Casing PC297013 Casting Material(Mat.): WCB, CD4MCuN, CF8M Gross Weight(G.W.): 110.7kg Standard: ASTM/DIN/JIS/BS Certification: ISO9001-2008 Processing: Heat treatment, Polishing, Sand blasting, machining processing Casting Process: Precision casting, Sand casting, Investment casting, Silica sol casting Casting Application: Transport equipment, Mining and Metallurgy, Engineering machinery, Medical equipment, electrical equipment, Food Machinery, Vacuum Equipment and other Industrial Unit Inspection Equipments: Spectrum analysis instrument, Metallurgical analysis, Tensile strength tester, Hardness tester, Roughness tester, deflection tester, Impact test machine, Altimeter, Scale Micrometer etc.� Company Advantage: * Sample request: Acceptable ( The sample charge is free if you have order) * Small order is acceptable for some maching parts( Can be negotatie) * Good quality with fast delivery * We have excellent design team for ODM/OEM order * We have 20 years rich experience focusing on this file which also establish the market in many Europe country and ect. * Main point: We can negotiate everything to try best to match our customer's request as "customer first " is the� principle in our company.
