General Description 1.PDR (Paintless Dent Removal) Series Hotbox Magnetic Induction Dent Removal System, can remove the small Dents, Door Dings and Other Minor Soft Dents on vehicles quickly and cleanly, which has a digital screen and relative control for both time and power settings. 2.No need additional and extra material,Induction Dent Removal System will remove a variety of soft and small dents easily by flameless heating the panel behind the paint from the outside of the panel, relieving the stress holding the dent and lifting the dent through induction thermal expansion, especially in hard-to-reach areas, or areas difficult to get behind. 3.It is one kind of fast, convenient and professional tool specially designed for professional PDR vehicles body shop workers, which can save time during a repair process. 4.Therefore the Induction Dent Removal System is the profitable choice for Auto Body Repairing Shop to remove the softer dent.
1.Adopted European MOSFET,IGBT solid power module and advanced resonance inverter technology,high efficiency,big output power and energy saving; 2.The digital phase-locked technology achieve frequency trucking automatically,optimization of metal heating process,ensure high efficiency and high speed heating; 3.100% full duty cycle,can work for 24hours continuously.Can control the heating temperature remotely and automatically by extra Infrared Thermometer,improve the heating quality and reduce human operation; 4.Perfect protecting functions,include over-current, over voltage, water shortage, lack of phase and other fault state self-protected and display,also some other necessary functions which will ensure our heaters higher reliability and durability; 5.The time of three stages:Heating,Maintain Temperature,Cooling can be adjusted separately. Furthermore,the function of adjusting the power of Maintain Temperature independently will be effective to control the heating curve and the heating temperature,suitable for workpiece of mass production,repeatability,rapid heating.when used in brazing,adopt combination of rapid heating and maintain temperature,not only heating fast,also solder spread out fully; 6.Easily operate and the output voltage is safe for operator.
Induction cooker
All steam boiler spare parts -
Solar water heater Carton
1, 7 lt/ min natural exhaust instant gas water heaterflue type; 2, Appearance with the indication light, summer and winter position , switch on-off; 3, GLP/NG. The export packing.
1. Easy and flexible installation 2. The output heat up to 4 times as the electric consumption 3. All weather design, no matter in rainy or cloudy days 4. Reliable defrosting technology 5. Less running cost and easy maintenance 6. Hot water tank with built-in heat exchanger 7. Comfort heating system with fully automatic, electronic control 8. Match electric water heater Operating temperatures: -7~43 dg c Out put water temperatures: 45~60dg c Heat value: 3535w Rate power: 890w Hot water offer: 76l/h Water storage: 200l Refrigerant: r417a/r134a or r22 available
Customize solar absorber plate 1.Model no. X-01qt-7/8 2.Welding ultrasonice welding 100% fusion 3.Absorber coating selective balck chrome 4.Riser fin material copper tp2 5.Number of riser 7or 8 risers 6.Optical performance absorption:~95%, emission:~10% Customize notes: 1.Three series black chrome, blue sputtering and anode oxidation for main choices; 2.Usually size:1.5sqm1.65sqm, 2.0sqm2.3sqm, 2.5sqm; 3.Type:u pipe, wall mounted, integrated copper plate are accepted; 4.All are ultrasonic welding with 100% fusion; 5.If customize as your diagram, kind let me know your special need. Foam and carton, with a piece of clean paper on each piece.
Heating element The products of this company are mainly applicable to chemical equipment, plastic forming and auxiliary equipment, sauna equipment, electric heating boilers, kitchen equipment, industrial cleaning equipment, commercial refrigerating equipment, commercial heaters, commercial air-conditioning and drinking equipment, solar energy equipment, electric frying equipment, wave peak welding electronic automated equipment, etc. For products, we always follow the principle of top quality and efficiency to win over clients and perform the most rigorous standards so as to ensure that the products are always in their optimal state. Therefore, the electric heating tubes and heating tube products provided by this company are in their dominating superiority in operation functions, security and service life. 1.Tube material: sus304, sus321, sus316l, sus310s, inco840. 2.Electric heating tube diameter : ¦6.6, ¦8.0, ¦10.0, ¦11.0, ¦12.0, ¦14.0, etc 3.Sealing patterns: heat resistance epoxy, glass. 4.Electrical performance: insulation resistance value is over 10000m+ and leakage current less than 0.5ma after being placed in cooling room for more than 1 year. 5.Input power and power:to be customized as required. Ok
1) All weather design, no matter in rainy or cloudy days 2) Output heat up to 4 times as the electric consumption 3) Hot water tank with built-in heat exchanger 4) Easy and flexible installation 5) Rate power: 890W 6) Heat capacity: 3535W 7) Hot water offer: 76/H 8) Water storage: 100L. Combcarton packing.
1. Suitable for the place require large amount hot water 2. Utilize the work principle of heat pump, the consumption of electricity is only 1/4 of electric water heaters 3. Energy conservation, environmental protection, and safety 4. Special compressor for heat pump, durable and energy efficient. 5. Stainless steel plate heat exchanger, less flow resistance, high efficiency heat exchange. 6. Reliable defrosting technology 7. Microprocessor controlling system, prevent the problem of water mixing, make you comfort all the time 8. Multi-protecting function, ensure the stable operation Operating temperatures: -7~43ºC Out put water temperatures: 45~60ºC Heat value: 6.8KW Rate power: 1.7KW Hot water offer: 146L/H Refrigerant: R417 or R22 available. Wooden case packing.
1. Suitable for the place require large amount hot water 2. Utilize the work principle of heat pump, the consumption of electricity is only 1/4 of electric water heaters 3. Energy conservation, environmental protection, and safety 4. Special compressor for heat pump, durable and energy efficient. 5. Stainless steel plate heat exchanger, less flow resistance, high efficiency heat exchange. 6. Reliable defrosting technology 7. Microprocessor controlling system, prevent the problem of water mixing, make you comfort all the time 8. Multi-protecting function, ensure the stable operation. Operating temperatures: -7~43ºC Out put water temperatures: 45~60ºC Heat value: 17.2KW Rate power: 4.3KW Hot water offer: 370L/H Refrigerant: R417 or R22 available. Strong wooden case packing.
1. Economical, the maximum efficiency could be up to 600% 2. The system could operate in three separately models: Air conditioning, water heater, water heater air conditioning 3. Durable: Good quality, up to 10 service time 4. Quiet operation 5. All weather design, work perfectly in rainy or cloudy weather, also day and night. 6. Microprocessor controlling system, prevent the problem of water mixing, make you comfort all the time Heat capacity: 38KW Cool capacity: 30KW Rate power: 9.76KW Hot water output: 45-60C Hot water offer: 817L/H Strong wooden case packing
Induction cooker.Customs clearance
Water heater.
Induction cooker.
1.Efficient Depending on external conditions (the heat of the source air), the cost of operation can be as little as 25% of that of an electric water heater, and can be used in locations unsuitable for solar hot water heating 2.Environmentally friendly Produces no harmful gas locally from the combustion of oil, coal, or natural gas. 3.Good looking Attractive design allows the unit to be placed in the open in finished utility spaces and basements, reducing the cost of remodeling. 4.Safe Free from potential hazard of carbon monoxide, there is no electrical contact with water, and does not provide an open flame, making the device more suitable for installation in a garage space than natural gas heater. 5.Simplified installation and operation Unlike oil fired units, no fuel delivery or storage is required. Unlike combustion heaters there is no need for vent piping, reducing the complexity of installation and allowing increased freedom in locating the unit. 6.Easy to operate Contains a timer for start and stop, and an adjustment dial for easy setting of the water temperature. 7.Multiple heat source Depending upon the location of the air exchanger, heat may be taken from the outside environment, from a sun porch or attic space, or from hot areas in light industrial environment such as bakeries and kitchens.
Material: Double wall #304 S/S for the inner wall #201 S/S for the outer wall Capacity:6.1L (Full Water) Real Capacity :5L (MAX Mark) Power: 1800W /1200W Voltage: 220V~240V / 50Hz,110V~120V / 60Hz Height: 34.5cm / Diameter: 20.5cm
Type: Axial Flow Fan Electric Current Type: AC Mounting: Wall Fan Blade Material: Plastic Place of Origin: Guangdong, China (Mainland) Brand Name: Chengyi Voltage: 220(V) Power: 40-128(W) Air Volume: 198-840(m3/h) Speed: 2200-2400(r/min) Certification: CCC, CE After-sales Service Provided: No overseas service provided Color: White, Silver or Customized. Application:Bedroom, Kitchen, Office etc.
1)The original introduction of Germany's most mature two-in-one oven technology, low energy consumption. 2)Adopting German three-way air outlet design to ensure uniform baking temperature in the oven, strong penetrating power, uniform color of baking products and good taste. 3) A perfect combination of high quality stainless steel and the imported components to ensure more stable quality and long service life. 4) The burner is using the Japan Olympia brand or original imported from Italy, low oil consumption and high performance. 5) With using the Taiwan imported insulation cotton which thickness achieved 185mm, we can make high efficiency effects of heat preservation. 6) Optional function: strong steam function.
