Application: The main content of tn-1 series one-component adhesive and solvent-free polyurethane adhesive are polyether, additives and flame retardants, they are odorless and non-toxic materials, suitable to be operated at room temperature, suitable for brushing and spraying process, they can be self cured at room temperature, insoluble to solvent and water roof. Packing: 25kg each pail.
FG Cryogenic Adhesive Description FG Cryogenic adhesive is made from mixing and heat treatment of asphalt,polymer and polymer and plasticizers.it has high bonding strength and good anti freezing property.suitable to be used as binder for foam glass and PU at low temperature. Application "Surfaces must be free of moisture,loose scale and rust ,dust,oil and grease.Asphaltic primers,coal tars,siliconers,alkyd or other solvent senitive or thermoplasticprimers or coating should not be used.some acceptable primers are zinc rich,polyester and epoxy,if in doubt,always check surface for adhesion before starting work with a test block ,apply a small block and let cure for a minimum of 24 hours,block should break before adhesive peels from surface. Blocks of insulation material should be checkedfor fit to the substr ate surface before work started.blocks must be reshaped or cut smaller if they do not fit,especially on overhead work. Adhesive may be applied to either or both surfaces,Application to the rougher surface generally gives the best results." Standard Packing Specifications: 20kg bags, 50kg pails.
Method for making the glue(honeycomb-broad core) Process: 1.Water:45kg. 2.Glue powder: 25kg (1 bag), put into the water and mix up. 3.96% caustic, soda1.7-2kg and borax 0.1-0.5kg add into 5-10kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (note: when making the glue, be sure to control the quantity of caustic soda based on the quality of caustic soda.)
Method for making the Glue(honeycomb-broad) Process: 4.Water:25KG. 5.Glue powder: 25KG (1 bag), put into the water and mix up. 6.96% caustic,Soda1.7-2KG and borax 0.1-0.5KG add into 5-10kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (Note: When making the glue, be sure to control the quantity of Caustic Soda based on the quality of Caustic Soda.)
Method for making the glue Process: 1., water: 2kg. 2., glue powder: 1kg (1 bag), put into the water and mix up. 3., 96% caustic soda 0.035kg (in winter), 0.03kg (in summer), and borax 0.02-0.025kg, add into 0.6kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (note: when making the glue, be sure to control the quantity of caustic soda based on the quality of caustic soda.) 4., tributyl phosphate (ar grade) : 1 cap (use the cap of the bottle is ok), about 30ml. Pour into glue solution and mix up. (note: this product is mainly used as a defoamer, please donâ??t add too much, or it will effect the viscosity of the glue.)
Sprayidea 93 acoustic material spray adhesive is designed for all kinds of acoustic material. It is fast and easy to mount acoustic panels to almost any wall type. Sprayidea 93 acoustic material spray adhesive evenly from the center towards the edges of your panel. Sprayidea 93 acoustic material spray adhesive are cheaper alternative to adhesive tape tabs and a little cleaner and easier alternative to wet mounting. Sprayidea 93 acoustic material spray adhesive wide web spray pattern makes this glue easy to use and work with. Sprayidea 93 acoustic material spray adhesive quickly bonds to dry wall, wood, concrete, fabric, felt, dacron, , foam , leather, , plastics (abs, pvc, acrylic),
Sprayidea 93 Acoustic Material Spray Adhesive is designed for all kinds of acoustic material. It is fast and easy to mount acoustic panels to almost any wall type. Sprayidea 93 Acoustic Material Spray Adhesive evenly from the center towards the edges of your panel. Sprayidea 93 Acoustic Material Spray Adhesive are cheaper alternative to Adhesive Tape Tabs and a little cleaner and easier alternative to wet mounting. Sprayidea 93 Acoustic Material Spray Adhesive Wide Web Spray Pattern makes this glue easy to use and work with. Sprayidea 93 Acoustic Material Spray Adhesive Quickly Bonds to Dry Wall, Wood, Concrete, Fabric, Felt, Dacronâ?? , Foam , Leatherâ?? , Plastics (ABS, PVC, Acrylic)
Size: 600ml(450g) Packing: 24 pieces/carton Shelf life: 24 months MOQ: 1200 pieces Heat Resistance: -30 to 95 Anti-aging: 8-10 years Sprayidea 97 Headliner Heavy Duty Spray Adhesive is ideal for use in vehicle trimming applications such as headlinings, door and panel trims and so on.particularly suited for bonding most furnishing materials including fabrics, leather, foam, carpets etc.
Size: 600ml(390g) Packing: 24 pieces/carton Shelf life: 24 months Effect time: 30-60 seconds Color: Transparent Scent: Low odor Remain tacky for 30 minutes Sprayidea89 Embroidery Spray Adhesive is widely used in computer embroidery industry, its super quality can be used on children' wear, underwear, nylon or other thin fabric and white fabric. Feature: 1.Super viscosity: suitable for all kinds of different fabrics; 2.The operation time is long, keep the viscosity in 30 minutes, ensure workers have plenty of time for operation, not need to repeat spray ; 3. Easy to use: only gently press the nozzle spray, no need brushing the glue; 4.White-transparent glue, low permeability, low residue, yellowing resistance, particularly suitable for the material of higher requirements for glue, such as white paper, fabric paste; 5.Environmental protection products:No formaldehyde, Freon, benzene etc., SGS tested.
Size: 450ml(400g) Packing: 24 pieces/carton Shelf life: 24 months Scent: Low odor MOQ: 1200 pieces Effect time: 3-5 minutes Sprayidea 69 Stain Remover is designed to remove the oil stain on the textile. 1.Dry powder formed after spray. 2.Special formula,can be used for a variety of fabric cloth. 3.Clean the oil stains on the fabric without leaving any traces. 4.Safety used on wool,knitted fabric,cotton fabric,silk and synthetic fiber. 5.Improve the work efficiency and productivity,remove the grease stains on clothes,will help manufacturers delivery on schedule.
Product Description Material100% metal nickel Techniqueelectroform,3M glue,packing Size210*310mm,thichkness 0.04-0.15mm colorsilver( or gold,copper,rose gold,pantone,chromatic,etc) MOQ1 sheet Sample timeA:4days if you want to customize your design. B:1 day for our existing samples for reference. OEMaccepted Certification availableSGS,GSV,CTI,ISO,RoSH,etc Packing detailsopp bag or export carton Production capacity:5000000pcs per month Payment term:L/C,T/T,D/P,D/A,Paypal(need to pay 6% charge),Western Union,Money Gram,etc FAQ Q1:You are factory or trading company? A:we are professional factory. Q2:What about the delivery time? A:Fast delivery 3-5 days for sample,mass production time depends on order quantity,nornally in 5-7 days. Q3:Do you have any MOQ limit for metal nickel stickers? A:Our minimum order quantity is one sheet. Q4:How do you ship the goods? A:DHL/UPS/TNT/EMS/FedEX Express for you choose. Q5:Do you offer different materials finish options? A:Shiny silver color,shiny gold color, glossy silver,glossy gold, brush,matte silver,matte gold,dome stickers,etc. Q6:what is the material we can do? A:We can do 100% metal nickel. Q7:What should I provide to custom stickers/decals? A:You should provide product's size,quantity,artwork,craft,material to us. Q8:What is the main buying procedures? A:1.Enquiry:contact us by email,phone call,fax,tradement,MSN,skype and let us know your enquiry. 2.Discussion: specify the iterms you desire,comfirm specification,OEM/ODM consultation. 3.Quotation:Price offered and accepted. 4.Place order as per contact or discussion. 5.PI offered to double confirm the order for both-side records. 6.Payment:T/T,Westion union,Paypal(need to pay 6% charge),etc. 7.Order completed under our arrangement. 8.Goods shipping as per contract term. 9.Goods arrive at Shenzhen port or warehouse,depending on contracted term. 10.Support & re-ordering.…
Heat Curing Silicone Liquid Optical Clear Adhesive Heat Curing Silicone Liquid Optical Clear Adhesive (LOCA) is a high-performance adhesive designed for use in optical applications that require clarity, strength, and thermal stability. It is a two-part system consisting of a base and a curing agent. The base component is composed of a silicone elastomer, which is combined with various additives to create the desired performance characteristics of the adhesive. The curing agent is composed of a catalyst that serves to initiate and accelerate the curing of the adhesive. When the two components are mixed and exposed to heat, a strong, optically clear bond is formed. LOCA offers excellent adhesion to glass, metal, and plastic substrates, as well as good optical clarity, UV resistance, and thermal stability. It is ideal for assembling touch panels, displays, and other optical components. Types of Heat Curing Silicone Liquid Optical Clear Adhesive Heat Curing Silicone Optical Adhesive BTL-5123AB Process of Heat Curing Silicone Liquid Optical Clear Adhesive BTL Heat Curing Silicone Liquid Optical Clear Adhesive is a high-performance adhesive that cures quickly and provides superior optical clarity and bond strength. This two-part adhesive is designed for the assembly of glass, polycarbonate, and other optically clear materials. The process for heat curing BTL Silicone Liquid Optical Clear Adhesive begins by preparing the surfaces to receive the adhesive. The surfaces must be clean and free of any dust, dirt, oil, or grease. The parts must also be positioned and held in place securely. Once the surfaces have been prepared, the adhesive can be mixed. The two parts are mixed in equal parts and mixed thoroughly until they are completely combined. The adhesive should be mixed just before it is used to prevent it from curing prematurely. The adhesive should be applied directly to the surfaces to be bonded and spread evenly with a brush or spatula. Once the adhesive is applied, the parts should be placed together and clamped securely in place.
Grinding stone glue is used in conjunction with grinding stones.it is a bonding materials for polishing stone. Product Advantage: 1.High strength of bonding 2.Easy application
LSR silicone adhesive WSD-0429-5-2AB is for liquid silicone / LSR silicone over molding with plastic,metal substrates, like PP, PPSU, PC,PA, PA66, stainless steel, zinc,copper.... in injection molding process
Tile grout,epoxy tile grout,flexibility tile grout,polyurea tile grout,waterborne tile grout,waterborne epoxy adhesive.
Neoprene Shoe Glue And Adhesives.
ADHESIVES: hot melt glue stick, glue gun, white glue, liquid glue, super glue, glue dots,glue tack,clear glue etc..OEM
Polyurethane Glue.
Industrial adhesives, adhesive.
Uv glue, epoxy adheisve; silicon adhesive; ab glue; super adhesive; electronic adheisve; smt adhesive; underfill adhesive.
