Tm1800 high intensity grade reflective sheeting Service life: 10 years Hot!! certificate: en12899 and astm. Tm1800 high intensity grade reflective sheeting 1. Available color: white, yellow, red, green, blue, orange, brown 2. Type of adhesive: pressure-sensitive type 3.Feature: imported surface film, acrylic type, screen printable, tearable 4.Size: 1.22m*45.7m Each roll will be packaged into one individual carton. Carton size: 130*20.5*22(cm) pallet packing is also available.
Four-head welding machine is a special machine for processing upvc doors and windows. The machine guarantees the welding strength, welding accuracy and durability of upvc windows and doors through plc programmer control, pneumatic driving system, and high-accuracy liner bearing motional pairs. The movements of profile clamping, profile melting, and frame fabricating are controlled by a plc, and all the movements are finished one by one automatically, easy to operate. Additionally, good-performance and long-life pneumatic components, imported industrial plc in control system, and high-strength machine construction, guarantee the service life of the upvc window welding machine. The machine is one of essential upvc window manufacturing machines. Technical parameter Power supply 380v/220v 50hz (optional) Input power 4.5kw Working air pressure 0.4-0.6mpa Air consumption 200l/min Welding profile height 20-120mm Welding profile width max ¡ü120mm Welding dimension range 400-4300mm Outside dimension 5300*1000*1700mm Weight 1600kg
Brief Introduction Vertical insulating glass production line is used to make insulating glass. This machine can make double and triple Insulating glass units. The insulating glass production line is the main equipment to produce insulating glass. The machine consists of input unit, glass washing and drying unit, cleanness inspecting unit, aluminum spacer assembly unit, panel pressing unit, tilting table. Input unit conveys glass sheets into washing and drying unit automatically. Washing and drying unit uses 3 pairs of brushes and entire rubber rollers, with hot air system and hot water system, to achieve better cleanness of glass. Cleanness inspecting units equipped with inspecting lights is used to inspect whether the glass is clean or not. Aluminum spacer assembly unit with spacer positioning system is used to load aluminum spacers onto glass sheets. Panel pressing unit with hydraulic driving system can press two sheets of glass with spacer together. Tilting table with universal wheels tilts insulating glass units to horizontal position. Features Automatic PLC Control System in whole manufacturing process, equipped with man-machine interface touch screen Realize the surface layer of coated glass and LOW-E glass automatically The washing unit and water system use stainless steel and anticorrosion material with all parts and it has features of super durability Applicable for washing glass with the thickness of 3 to 12mm, with specially designed automatic glass transport mechanism of washing and drying unit With multistage frequency conversion control and multi-speed revolution optimization function, the machine can process all kinds of glass sheets with different glass size Washing glass continuously, distinguishing the first and the secongd glass sheet automatically Every glass transportation unit uses buffer stopping function to avoid bumping, and effectively reduces the wearing of conveying wheels from glass Capable to make triple or step insulating glass unit (optional) Main Technical Parameter
Specifications High quality insulated glass; Strong technology supporting; 5 producing lines; Professional exporting service. Colors: 1. Blue: sky blue; lake blue; dark blue; royal blue 2. Grey: euro grey; dark grey, mist grey 3. Green: f. Green (light green), dark green 4. Bronze: golden bronze, red bronze 5. Pink 6. Golden 7. Clear etc. Size: Max:2440x3500mm Min:300x300mm Thickness: Thickness: 5mm+9a+5mm, 6mm+12a+6mm etc
Specifications toughened glass 4mm Glaston toughened furnace 4mm clear glass facade Export to over 20 countries CCC,meet EN/BS/NZS/ANSI Widely used for windows & doors, shower room, balustrade, pool fencing, skylight, furniture desktop, partition, solar panel, curtain wall, greenhouses, etc. Tempered/toughened glass is made from annealed glass via a thermal tempering process in which the glass is heated till its softening point about 650 degrees and then quenching quickly to become Tempered glass or heat strengthened glass Characteristics A fully Tempered glass is 3 to 5 times stronger than annealed glass of similar thickness. A fully Tempered glass is regarded as a safety glass and when it breaks it disintegrates into small blunt pieces/ small oval-shaped pebbles which greatly reduce the chances of injuries 1) Strength - Fully low-e Tempered glass is generally 3 to 5 times stronger than annealed glass and twice as strong as heat strengthened glass of similar thickness, size and type. For fully Tempered glass the minimum surface compression is 10000 psi and for a heat strengthened glass is 4000-7000 psi for 6 mm glass. 2) Safety - When broken by impact, fully Tempered glass immediately disintegrates into small oval-shaped pebbles, thus greatly reducing the likelihood of cutting person Properties of Tempered glass Data Density (Approximate) 2.42-2.52 g/cm Tensile Strength 120 to 200 N/sq.mm Compressive Strength 1000 N/mm2 Modulus of Elasticity 70Gpa Coefficient of linear expansion 9 x 10-6 m/Mk U Value 5.7W/m2C for 6mm Tempered glass SF for 6 mm clear 81 % SC of 6 mm clear 0.93 Selectivity 1.0 VLT of 6 mm tempered glass 87% Clear Tempered glass thickness: 3mm, 3.2mm, 4mm,5mm,6mm,8mm,10mm,12mm,15mm,19mm Color: Clear, Ultra clear Tinted, Grey, green, bronze, blue etc. Reflective & low-e (including double silver low-e) etc. Main Products we process: a. Flat tempered/toughened glass b. Curved tempered/toughened glass c. Insulated glass d. Tempered/toughened insulated glass e. Laminated insulated glass f. Tempered low-e insulated glass g, Double silver low-e insulated glass h, low-e insulated glass with TGI spacer i. Silk screen printing glass j. Frosted glass/land blasted glass, acid etched glass k. Hot bent glass
Laminated glass is made of two or more pieces of glass panes, which are laminated with PVB interlayer under high temperature and high pressure. Laminated glass production line is necessary equipment for construction glass, decoration glass, wind-screening glass and bulletproof glass. The whole full automatic laminated glass production line, we often call it lamination line, laminated glass line. It consists of automatic loading machine, washing and drying machine, Transition conveyor (¢ñ.¢ò.¢ó) Automatic positioning station£¬ Automatic sucker transferring unit, Assembling table, PVB film unwinding machine, Heating and pre-pressing machine, Unloading tilting table and Autoclave. There are two kinds of heaters: Ordinary quartz heater and IR heater. The whole line is PLC controlled with high efficiency, safety, reliability, and easy operation. It has serious technical features as following: 1. The solid and efficient intelligent control system: the whole line is centralized control by industrial computer assisted in PLC and monitor display/operation, Conveyors of the whole line are centrally controlled. 2. Designing and producing focus on safety regulations and energy saving programs. We can satisfy any kinds of requirement of consumer to produce the machine what the want. 3. Software programs by ourselves can satisfy any range of glass types and sizes for processing. The glass sheets are guaranteed to have a smooth and coherence without any crash and scratch in fast or slow speeding delivery. 4. Automatic loading Machine has different demand such as single/double side(s) and single/double/multi working station(s) to load the glass sheets into the working line. 5. Glass Washing & Drying Machine focuses on appropriate design and convenient operation. Top section including top brushes, pressing rollers and air knives can be adjusted automatically or manually, the maximum of distance can reach 400mm. 6. Automatic Positioning Station in cleaning room realizes the glass accurate positioning. The conveying roller works the crosswise positioning and the synchronous belt works the lengthwise one. After the accurate positioning the glass sheet will be taken by Overhead Transferring Unit to assembling station. 7. Overhead Transferring Unit in cleaning room can be set travel distance is based the glass size. It ensures the assembling accuracy within ¡À0.5mm. 8. Extension Assembling Table can extend the working station according to glass size. PVB Film Unwinding Machine can wind /unwind the film automatically. The maximum capacity is to load 5 rolls. 9. The pre-press rolling machine has high value design and factions for pre-press rolling glass bond. The heating zones in it are fitted with IR emitters which can be adjusted by controlled silicon to realize no contact rapid alternation. Combined with PWM system to regulate the IR emitter the rays will be perfectly absorbed by the film. The main heating zones are designed to have air cycle system to realize uniform temperature distribution so that to be adapted perfectly to the different types of glass. The pressing roller I and II can automatically (option) adjust the gap to meet the glass thickness. The top structure with cylinder supplies upper press. Well balanced heating and regular air evacuation are guaranteed for good pressing consideration. The structure is reasonable for min movement after pressing. 10. Tilting Table for Unloading makes the glass sheet from conveyor to approx. vertical situation that is easy for clamp lifting. 11. Autoclave is controlled by industrial computer assisted with digital control card and digital display to realize real-time control. It ensures safety, convenient operation and faster cooling per circle that outside wire connecting and know-how circulation, water cooling system.
Semi-automatic laminated glass production line, we often call it lamination line, laminated glass line. This line includes different equipment such as washing machine, PVB unwinding machine, laminating positioning and transmission machine, movable scissor sucking hanger, pre-laminating and pressing section and autoclave. There are two kinds of heaters: Ordinary quartz heater and IR heater. The whole line is PLC controlled with high efficiency, safety, reliability, and easy operation. £¨1£©The whole line is centralized control by PLC . £¨2£©Washing and drying machine is the core equipment of the whole line. The upper Rubber rollers, brush rollers and air-knives etc. can be adjusted on the panel and digital displayed according to the thickness of glass to be processed. The upper section of the machines can be elevated by 400mm for convenience of cleaning and repairing. The Brush Rollers are driven by motors with upper and lower separately. Allocation of one soft brush and two hard brushes (can be lifted when needed) in the upper washing sector is designed for washing hard low-e glass, coated glass without damaging the coating. Three Stainless steel air-knives, the blower equipped with muffle cotton and air feeding filter screen pack ensures plenty of air, less noise and the good drying effect. £¨3£©In the laminating room the laminating table, brace of the up-down device, positioning cylinder, PVB film unwinding machine, movable scissor cup suction hunger, convenient for processing of large and big glasses. Every single processing glass can be conveyed in a higher speed to enter into the Pre-laminating and pressing section and regulated automatically the speed to running at the same speed with the Pre-laminating and pressing section which can make room for the next pieces of glass which improves the running efficiency of the Line. £¨4£©Pre-laminating and pressing section has reasonable structure. The integrity is controlled in laminating room with its stable running function. Speed regulation is frequency variable. Space/distance between two great squeezing rollers is set by industrial computer assisted by PLC with monitor displayed. The great squeezing rollers are driven by reducer separately. The heating elements adopt Quartz -Heaters. Temperature is zone control. £¨5£©Autoclave is a specialized machine for production of laminated, anti-bullet and anti-bombing glass. This machine will melt the PVB film and combined two layers or more than two layers glass by high temperature and high pressure. Technical parameters 1. Max. Processing glass size:6000mm2500mm 2. Min. Processing glass size:400mm 400mm 3. Processing laminated glass thickness: 6-80mm 4. Total length: 26800mm 5. Power source: AC380V 50 HZ 6. Total power:138.63 KW(without autoclave power)
Characteristics: 1. Loading section equipped with stainless steel water tank and spraying device. 2. Easy operation and maintenance: top frame supported by high strength screw can be elevated by 400mm as a whole for convenient cleaning and maintenance. 3. Drying section: blower packed with muffle cotton can largely minimize the noise. The air filter screen fixed across the entrance of blower can reduce dust during the drying process and is easy to remove for cleaning. Air blade can dry glass panel in a short time with high speed cold air without heating. Pressing roller is used for top oblique air blade to ensure smooth transmission of small glass panels. 4. Conveyor device: bevel gear is adopted for steady and synchronous transmission. 5. Water circulation system: water sprayed out to the brushes will return to the tank and be reused by circumfluence thus save water consumption. 6. Control system: all function buttons are separated and clearly marked on the control panel. Conveyor device uses transducer to adjust the transmission speed. Glass thickness and transmission speed will be showed on the digital display.
With advanced laser micromachining process, we supply any geometric cut sapphire windows and substrate Min precision of +/-5micron Max size: 200*200mm Min holes/slots width: 50micron Max depth-diameter ratio of micro holes: 20:1 Min micro holes: 30micron We could also provide other kinds of micro machining jobs in sapphire, min features @ tens of microns 1kg
Min hole size: 30micron Max thickness: 1mm Max depth-diameter ratio: 20:1 Hole precision: 5micron Smooth sidewall, no chipping, no burs Taper adjustable Sapphire crystal is widely used in semiconductor (mocvd epitaxial gan substrate), watches, medical science, communications, Lasers, infrared, electronics, measuring instruments, military, Aerospace and others high-tech industry. 1kg
Geometric cutting or micro drilling of Quartz glass, and many other kinds of glass, especially for the custom Shape/design cutting of thin glass (less than 1mm) , with very high precision Requirements. We could make shinning sidewall with no chipping at the cutting edge. Precision: 20micron 1kg
Min hole size: 30micron Max thickness: 6mm Max depth-diameter ratio:100:1 Hole precision: 5micron Smooth sidewall, little chipping, no burs Straight hole, no taper or positive taper available if required. 1kg
Nashiji wired glass: Size: 1830x2440 mm Thickness: 6mm 33pcs/crate Fire-resisting time: 72 minutes Features 1)fireproof sfety: wired glass is suitable to be used as an efficent fireproof material. Even wired breaks om tje fore/ tje fragments will still conect with each other by the wire meshed and not fall down. Which prevent fire spereading 2) shock resistant safety: even wired glass brokend in shocking. Wooden crates
1.Direct factory supply glass mosaic 2.Available in different colors, sizes, original designs 3.High quality, reasonable price. Chip:25x25x4(6, 8)mm, 30x30x4(6.8)mm Sheet:300x300mm
Main use: Gx-p series flat glass tempering furnace are mainly used to produce flat tempered glass for architectural purpose, interior decoration, furniture appliances, instrumentation, lamp, etc. Main technical features: Glass sheet size: max size 3500*12000(mm), min size 60*60mm Perfect processing quality: comply with gb9963, gb9656, ecer43, ansiz97.1 standards; Broad glass processing applicability: float glass, coated glass, roddle patterned glass; Advanced heating methods: radiation/convection matrix heating optional with intelligent heating control system; Lower energy consumption: continuous production and tempering, energy saving; Easy operation: user-friendly inteface, self diagnosis, achieving auto-control in whole process Convenient datea storage: mass storage device, applicalbe for industrallized production and management.
Main use: Mianly used to produce the tempering glass for facades of building, curtain walls, household furniture, etc. Main technological features: 1, the furnace has two chambers, one for preheating and the other for heating.Due to this, the heating efficiency is higher and the productivity is 1.4-1.8 times than that of the single-chambered furnace. 2, an independent heating source is separately fixed onto the preheating chamber and the tempering furnace. Glass enters teh preheating chamber and then the tempering furnace to get heated. 3, glass will get preheated during the preheating section, which could ensure the glass be heated more evenly and increase the finished product rate.
Main use: Gx-sq series hyperboloidal glass tempering furnace is the new product of gangxin corporation, it's mainly used to produce the tempered glass for sidelites, back window of high-grade automobiles, and the home appliances, facedes of building, etc. Main technological features: 1, forming under high temperature more precisely with spherical surface more smooth and perfect. 2, with low-cost mould-made process, it's fast and convenient to make the replacement. 3, it achieves the completely automatic control in whole production, has slef-diagnosis capacity and comfortable human-machine interface, offers the production software based on 2 working stations or 3 working stations.
Glass factory design Based on a full understanding of the customer's design requirements, we carefully verify the basic design materials and construction conditions at site and listen attentively to the advice of the customer's technical personnel. And on the premise of guaranteeing the products' targeted quality, we optimize the design proposal in terms of meeting the technology process requirements, guaranteeing products' quality, minimizing the project investment and production cost etc. Then the overall design intentions will be told to the customers in time and a team of professionals shall be dispatched in time to the construction site to solve the problems appeared during the construction, installation and commissioning period. Engineering consultation Based on our accumulating plant-building experience, our company has formed a comprehensive service system to provide the customers with relevant technological consultation at the early stage of proposal approval, investigation and design stage, construction period, operation period and afterward evaluation stage. We shall do our best to optimize the design proposal in terms of meeting the technology process requirements, guaranteeing products' quality, minimizing the project investment and production cost so that our customers benefit the most from the consultation.
The distance between the foot line of l-shaped wall and top surface of sidewall is short, which allows thinner batch feeding so that the batch can be melted more easily. It can also reduce fire and batch running at the charge end and hence energy can be saved and environment improved.With its high reliability and long service life span, the l-shaped suspended back wall serves as one of the essential measures for prolonging the whole furnace life. Main technical index: 1. Modulus width of suspended wall: 300mm; 2. Width of brick structure: 380mm; 3. Length of nose zone (doghouse): 1700-2300mm; 4. Service life: more than 10 years.
The top roller installed at the both sides of the tin bath can effectively control the width and thickness of the gross glass ribbon. The main technical index: 1. The thickness of glass sheet:1.0-25mm 2. The horizontal oscillative angle of head: 3. The accuracy of head's oscillative angle: 4. The speed of rotating coil of head: 10-1500m/h 5. The accuracy of coil-speed of head: 0.01% 6. The radial direction run-out should be no more than 0.2mm 7. The accuracy of head's pressed-depth: 0.1mm 8. The biggest depth for head (inside the bath): 2000mm 9. The longest distance of machine frame for lifting up and down: 100mm 10. The accuracy of machine frame for lifting up and down: 0.1mm 11. All the above index can be customer-designed.
