The gaskets can replace the original one. Tance Each rubber material has its unique resistance towards various chemicals. Polymer used, as well as additives, effect which chemicals each rubber material is suitable for. High temperature At high temperatures the rubber will be attacked faster by the chemicals in use, and the surrounding oxygen. The oxidation process will either make the rubber harder (the most common one) or make it softer (less common), or both at the same time. Either way the change in properties will reduce the performance. All rubber materials have a maximum continuous temperature, which should not be exceeded to maintain good performance and to achieve a reasonable lifetime. Low temperature At low temperatures the stiffness increases, and the elasticity decreases. This influences the sealing force of the gaskets. All rubber materials have a certain lowest temperature that have to be exceeded to be able to perform well enough as a gasket. Food applications For food applications there are demands according to international standards. The usual one for phe gaskets is fda (usa). This standard regulates what additives are allowed to be used in the rubber and to what content. It also sets demands on what tests have to be done to ensure the quality level.
1. Durable, ozone-resistant 2. Iso9001: 2000 standard 3. Oem/odm are welcomed
We are manufacturing all kind of gasket , oil seal, for engine parts. Comisized
Kammprofiletm gasket is the preferred gasket when improved performance at low seating stresses is required. It features excellent anti-blow-out properties linked with the reliably of a solid metal-to-metal seal combined with a soft sealing face to provide a tighter joint. It is particularly suitable for applications where high temperature, pressures and fluctuating conditions are encountered. Non-metal cover layers ensure that flanges are not damaged, even at extreme loads. This gasket is an ideal replacement for problem applications associated with jacketed gaskets, for heat exchangers, vessels and reactors and various flange connections. Pressure: (6.4~25mpa) Other items in : gasket kammprofile gasket corrugated metal gasket Materials for the faces: Flexible graphite, ptfe, non-asb, etc. Normal with thickness 0.5 mm
Spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. It has been widely applied in the fields of petrochemical, mechanical manufactory, power station, metallurgy, shipbuilding, medical and pharmaceutical nuclear power station and navigation, etc. Other items in : gasket spiral wound gasket » inner and outer ring of swg On request
Cummins gasket (B/C/L/NT/KT/M/A2300) .
Detailed product description Graphite packing ring -content of graphite: at least 99% -can be reinforced by 304ss , nickle wire -content of wire mesh:60% Graphite packing ring, graphite gasket is formed by molding flexible graphite tape or flexible graphite braided packing, and metal materials can also be put in together. It is mainly used for sealing or valves, pumps and expansion joints, which are used in oil industry, thermoelectric station, nuclear power station and other general industries. The property solves the problemof corrosion to the valve stem completely. Typical types Available in 99% purity, corrosion inhibited and oxidation resistant grades. Supplied endless, split or as matched halves. Square or rectangular section rings supplied as standard Non-standard shapes can be producedto suit specific requirements. Metal tipped rings available for high pressure anti extrusion applications. Graphite packing sleeves with or without stainless steel eyelets are available. Typical applications Packing for dynamic sealing of compressors and pumps. Packing for valves. Packing for the gland boxes of chemical instruments. Available in almost every style of our braided packing. For composite sealing to take the place of mechanical sealing. Wooden box
Construction: Zt-410(graphite sheet jacketet tanged metal) is made by materials of three cascades. A laminated graphite is inserted into a convexo-plane metal frame perforated. It is produced by specially pressing and sticking process. This kind of sheet is be seized of the characteristics such as good compressibility and resilience, small stress relaxation, fine compensation function for uneveness of sealing surfaces and long working life. Normal style: zt-410/304 Zt-410/316 Zt-410/other tanged metal material Technical data: Compressibility: 19-23% Graphite purity: min 99% Chloride content: max 50ppm Temperature: -200 to 550 Pressure: up to 600bar Ph: 0-14 Media: Steam, mineral oils, heat transfer oil, hydraulic oil, fuel, water, seawater, freshwater. Benefit: Permanently elastic, even in hot-cold cycles over the entire temperature range, no aging, no brittleness, no hot or cold flow, long time uniform compressibility and resiliency independent of temperature. Available: Sheets gasket: zt-g410 Dimension: 500 x 1000 x 1.0 /1.5 /2.0 /2.5mm 500 x 1500 x 1.0 /1.5 /2.0 /2.5mm 1000 x 1000 x 1.0 /1.5 /2.0 /2.5mm 1000 x 1500 x 1.0 /1.5 /2.0 /2.5mm Special density , thickness or insert material are avaliable to request. Wooden box
Reinforced asbestos free sheets (1) stainless steel wire-mesh inserted (2) high temperature and high pressure 3) 0% asbestos Reinforced non-asbestos sheet The product is made of non-asbestos sheet that metal pressed and compounded by sheet thickness, which is extensively applied in manufacturing various motor gaskets. It is a new material that will substitute asbestos products. The product has excellent performance in dilatability, sealing equality and long life etc.. Mainly applied in automobile farming machine, motorcycle and engineering etc. , it is also can be used in high strength gaskets and cylinder gaskets etc Standard size: 1000x1000mm, 1000x1200mm, 500x1000mm, 500x1200mm. Thickness: 1.0 to 2.5mm Technical data: Density, (asbestos paper): 1.0~1.3g/cm3 Condensability: 30% Elastic recovery: >35% Sealing performance: 150-300. Wooden box
Description:zt-600 spiral-wound gasket is formed of v-shaped metallic stripe and soft non-metallic filler by means of piled, spiral wound and connected its end and beginning by dot welded. Depend on its excellent compression resilience it is suitable for sealing spots where the alteration of temperature and pressure are frequent. It can be used as the static sealing element of pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc. It has been widely applied in the fields of petrochemical, mechanical manufactory, power station, metallurgy, shipbuilding, medical and pharmaceutical nuclear power station and navigation, etc. Application: We can produce according to asme, bs, jis and en(din) standards or client request. ProductsStyleFlangeFor example Basic type swgZt-600Tongue and groove304/ptfe Swg with inner ringZt-600 irMale and female304 304/fg Swg with outer ringZt-600 crRaised face Flat face304/asb cs Swg with inner & outer ringsZt-600 ic304 304/fg cs Swg for heat exchangerZt-600 hHeat exchanger304/fg with 1 bar of dj Special shape swgZt-600 sSpecialOval Material: StyleStructureHoop materialFiller materialInner & outer ring materialNormal thickness mm GasketInner & outer ring Zt-600Without rings304(l);316(l) 321;317l 31803 Monel, Ti, ni Inc Hast.C/b Zr702 Etc. Graphite, ptfe, Asbestos Non-asb Mica, EtcCs, 304(l), 316(l), 321;317l 31803 Ti, ni Inc Hast. Monel, Zr7023.2 4.5 (0.175¡±) 6.42 3 (1/8¡±) 4 Zt-600 irWith inner ring Zt-600 crWith outer ring Zt-600 icWith inner & outer rings Color cord as asme b16.20 on request. Wooden box
Gaskets, shaft, special-shaped pieces The shaped components are made of polymerization of PTFE resins, then it still need the double processing means or special production methods in order to achieve the precision.Thus they turned the Gaskets ,Shaft ,Special-shaped. Products Application: Application of -1800C to +2500C temperature under various corrosive medium in seals, tube parts, chemical corrosion resistant vessels, mechanical equipments wear down, lubrication materials, various frequency of insulating parts. Filled Material reinforced: 1) Graphite filled, increase thermal conductivity, lubrication, abrasive resistance 2) Cooper powder filled, increase intensity, abrasive resistance 3) Glass fiber filled, increase hardness and intensity 4) Carbon fiber filled, to increase intensity In addition, our company uses the existing machines to produce products according to customers¡¯ requirements of various components.
Spiral wound gasket manufactured by wealson is widely uesd for sealing flange joints, manhole and handhole covers, tube covers, boilers, heat exchangers, pressure vessels, pumps, compressors and valves, in industries such as petrochemical, pharmaceutical, shipbuilding, and food processing, in power industries and nuclear power stations. They are ideal for steam, oil, liquids, gases, acids, alkalines, various organic mediums and solvents. It can be manufactured with any material as per customers requirement in accordance with the standard ASME, DIN, BS, api or to customer's specification.
Wealson graphite composite gasket is also called reinforced graphite gasket or high-tensile graphite gasket. Graphite gasket is cut from pure graphite sheet with features excellent corrossion-sesistance, metal reinforcement, high and low temperature resistance, high internsity. It can be bear high temperature and high pressure. Graphite gasket is ideal gasket for valves and static seal in almost all applications. Graphite gasket can be used as sealing parts of connection point of all kinds of pumps, pipes, valves, pressure containers, heat exchangers, tower manhole, hand-hole and flange, as well as the sealing points of nilometer crystallizer and liquidometer.
Our company mainly produce silicone extrusion parts and rubber & plastic extrusion and molded parts. 1. Our products include: (1) Silicone extrusion parts. (2) EPDM&PVC extrusion parts. (3) Electrical apparatus fire resistance rubber parts. (4) High and Low temperature resistant rubber parts. (5) Electric conduct rubber parts. (6) EPDM foam parts. (7) NBR dense parts. (8) Silicone,EPDM & PVC molded parts. (9) Other special TPV,TPO,TPR,TPU,PP,ABS,CPVC,PVC/NBR extrusion parts. 2. Function: Rubber seal could stop air, water and dust enter the machine system, which could protect the machine or parts to be healthy and working well. 3. Features: Excellent chemical and physical property, excellent oil, high/low temperature-resistant, wearing-resistant, oil-resistant, dust-resistant. 4. Application: Railcars,automobile,steamboat,industrial electrical equipment,building door& window,construction machinery,construction bridge and tunnel. Etc. 5. Specification:According to your requirements. Packing dimensions: 50cm*50cm*30cm Weight:1kg.
Silicone Rubber Seals Gasket Specification 1) Material: 100% silicone/rubber material; 2) Material FDA&LEGB Approval, Non-Toxic, Oil Resistant, Tasteless, Non-Stick finish, Durable and easy cleaning. 3) Temperature -40¡ãC to + 240¡ãC 4) Hardness 30-80 shore A 5) Types Oil Seals, Water seals, Air seals, Gaskets, Nonstandard. 6) Tolerance ¡À0.1-0.3mm 7) Kinds of shapes and colors are available; 8) Applications: industrial parts, motorcycle parts, electronics parts, bathroom parts, medical parts,vehicle parts,and others; 9) Quality: Producing products under the standard of ISO9001, they are qualified and safe products; 10) Lead time: Delivering the goods in 7 days after receiving the order if mould available; Delivering the goods in 15 days after receiving the order if need to develop a new mould; 11) Packaging: according to your requirements. Per customer's requirement.
Detailed Product Description: Rubber Fashtening Gasket: 1, ROHS,SGS 2, ISO9001,ISO14001; 3, Oil seals, Water Seals, Air Seals. Silicone Rubber O-Rings Specification: 1, Material: NBR, NR, EPDM, Silicone, SBR, etc 2, Material Rohs-SGS Approval, Non-Toxic, Oil Resistant, Tasteless, Non-Stick finish, Durable and easy cleaning. 3, Temperature: -40C to + 150C 4, Hardness: 30-80A 5, Shapes: O-Type, E-Type, U-Type, V-type, or your custom design. 6, Diameter: 1mm to 80mm 7, Color: Transparent, White, Black, Blue, Green, Red, Yellow, etc. 8, OEM & ODM orders are welcome 9, Application: Household appliance, Bathroom Fitting, Water System Fitting, Electric Products, Industrial Equipment, Plumbing fitting. 10, Quality: Products are produced under the standard of ISO9001, quality is 100% promised. 11, Lead Time: 7days after getting the deposit if mould available;13days after getting the deposit if need to develop new mould. According to customer's request.
Materials: NBR, EPDM, FDA SIL, IIR, SBR, VITON, etc. Hardness: 30-80 shore A. Different colors and sizes are available Made per customer drawings or samples. Packing: According to customers' requirements.
Features: 1) Size: customized 2) Wear-resisting,Dustproof ,sound-insulated ,quakeproof ,seal 3) Material: wool.
Metal serrated gasket Place of origin: China Zhejiang Brand name:jinshan model number: jsd-2001 Standard or nonstandard:standard shape:serrated gasket Material: metal Wooden box
Ring joint gasket/ metal gasket [technical parameter] Types of gasket: serrated, octagonal, elliptic, lens-shaped Materials: carbon steel, ocr13, 1cr18ni9, 304, 316 Temperature: -100-80 Pressure: 35mpa [main uses] for static sealing in flange joint of high pressure pipeline, container, equipment and etc. [specification] dn10-800mm.
