Find Verified Fruits Suppliers, Manufacturers and Wholesalers

Product Application
Configuration diesel engine 23.5kw, Choose 3+1 gear box (high and low speed),Forward speed 1.48-5.59km/h,reverse speed 0.85 km/h,Walking system is tracked (rubber and steel tracks can be used in two forms),operation way is remote control,remote control distance more than 100m. this machine configuration the tiller, lawn mower, aslo can Optional the Cultivation, fertilization, weeding, spraying and traction and so on. The utility model is a typical self-propelled multifunctional machine tool.
Features:
1)Engine: one cylinder , water cooled diesel engine from Changchai.
2) Operation way: remote control or manual.
3) Overall size: have the more small , fit to different zone to work. 
4) Pedrail : two type for choose : rubber and steel tracks.
5) Multifunction: Cultivation, fertilization, weeding, spraying and traction and so on.

Technical Parameter
Model KDC-11YK
Engine Changchai/32HP
Gear position Ahead 3/Back 1
Remote control distance 100m
Weight 900Kg
Package Size 2800*1200*1200(The size includes rotary tillage)
Cutter grass width 1.2m
Stubble height 3-5cm
Work efficiency 1500m²/h
Knife shaft speed 1000rpm/min
Type Flail mower
Weight 150kg

Product Application
Configuration diesel engine 23.5kw, Choose 3+1 gear box (high and low speed),Forward speed 1.48-5.59km/h,reverse speed 0.85 km/h,Walking system is tracked (rubber and steel tracks can be used in two forms),operation way is remote control,remote control distance more than 100m. this machine configuration the tiller, lawn mower, aslo can Optional the Cultivation, fertilization, weeding, spraying and traction and so on. The utility model is a typical self-propelled multifunctional machine tool.
Features:
1)Engine: one cylinder , water cooled diesel engine from Changchai.
2) Operation way: remote control or manual.
3) Overall size: have the more small , fit to different zone to work. 
4) Pedrail : two type for choose : rubber and steel tracks.
5) Multifunction: Cultivation, fertilization, weeding, spraying and traction and so on.

Technical Parameter
Model KDC-11YK
Engine Changchai/32HP
Gear position Ahead 3/Back 1
Remote control distance 100m
Weight 900Kg
Package Size 2800*1200*1200(The size includes rotary tillage)
Cutter grass width 1.2m
Stubble height 3-5cm
Work efficiency 1500m²/h
Knife shaft speed 1000rpm/min
TypeFlail mower
Weight 150kg

Product Application
Configuration diesel engine 23.5kw, Choose 3+1 gear box (high and low speed),Forward speed 1.48-5.59km/h,reverse speed 0.85 km/h,Walking system is tracked (rubber and steel tracks can be used in two forms),operation way is remote control,remote control distance more than 100m. this machine configuration the tiller, lawn mower, aslo can Optional the Cultivation, fertilization, weeding, spraying and traction and so on. The utility model is a typical self-propelled multifunctional machine tool.
Features:
1)Engine: one cylinder , water cooled diesel engine from Changchai.
2) Operation way: remote control or manual.
3) Overall size: have the more small , fit to different zone to work. 
4) Pedrail : two type for choose : rubber and steel tracks.
5) Multifunction: Cultivation, fertilization, weeding, spraying and traction and so on.

Technical Parameter
Model KDC-11YK
Engine Changchai/32HP
Gear position Ahead 3/Back 1
Remote control distance 100m
Weight 900Kg
Package Size 2800*1200*1200(The size includes rotary tillage)
Cutter grass width 1.2m
Stubble height 3-5cm
Work efficiency 1500m²/h
Knife shaft speed 1000rpm/min
Type Flail mower
Weight 150kg

relieve cold jelly
Every medicine has a certain amount of toxicity, the abuse of antibiotic may impair the nervous system, kidney and blood system. People with idiosyncrasy may generate severe allergic reaction even fatal harm.
After the suppression or killing of sensitive bacteria by antibacterial agents, some insensitive bacterial or mould may still grow and proliferate which giving rise to new infections; it is commonly seen among patients with long term abuse of antibacterial agents. This situation causes trouble for the treatment which leading to a high rate of mortality.
At the time of a majority of ordinary bacterial being killed by antibiotic, the pathogenic bacteria, with original inferior position and drug resistance, survive and breed with a large amount. To a great extent, super-bacteria are expedited by the abuse of antibacterial agents.
The abuse of antibiotic has a significant influence on the beneficial bacteria community in the intestine; it may involve into the normal function of immune system of human body, and ultimately greatly impede the treatment of cancer.
Improve immunity herbal product and herbal natural anti-inflammatory food are our main product. The product all combine Chinese traditional medicine & bio-extraction tech.

Improve Immunity Herbal Jelly ingredietns
Dandelion
The plant material contains a variety of healthy nutrients such as taraxol, taraxacin, choline, organic acid and inulin etc. It has effects of diuresis, alleviating diarrhea, receding the jaundice and choleretics effect.
Euglena
It contains 59 kinds of essential nutrients for the human body every day, it has distinctive functions in protecting liver, alleviating allergic dermatitis, suppressing the absorption of purine as well as in the aspect of preventing and improving gout.
Honeysuckle
It can be used to strengthen immunity, protect liver and fight against cancer, has the efficacy of removing inflammation and alleviating heat, clearing heat and toxic materials, anti-inflammation, tonifying deficiency and curing the wind; it is possible of treating more than 40 kinds of diseases such as respiratory infection, acute urinary system infection and hypertension etc. with the match of other medicines.
Seaweed
It is capable of improving immunity, fighting against cancer and virus, preventing HIV, reducing the vascular lipid content that leading to the arteriosclerosis, curing cardiovascular and cerebrovascular diseases as well as increasing brainpower etc.

Features
1.High-end configuration: core components are equipped with first-line brands such as Germany and France; Beckoff 3rd generation CNC system is easy to operate, and can provide real-time feedback on processing status to ensure orderly processing;
2.High reliability: Tianhong Laser newly builds CNC system platform, EthCAT bus control, stable and reliable; imported laser, longer service life, more stable and reliable;
3.Easy to operate: flexible operation of the sports system, user-friendly design, more practical user experience;
4.High degree of intelligence: maximum configuration of fully automatic components, centralized process database, reducing manual intervention on the machine, maximizing the safety of personnel.

Specifications
Laser power: 3000W-15000W
Z axis strokeï¼? 100mm
Max. running speed of X/Y axis: 110m/min
Max. linkage speed of X/Y axis: 144m/min
Max. acceleration of X/Y single axis: 2.0G
Positioning accuracy: ±0.03mm/m
Repositioning accuracy: ±0.02mm

This machine is suitable for different kinds of textile, especially Seamless bonding fabric. It can do accurate cutting on different kinds of textile, fabrics in random figure.

It adopt crawler working table and negative pressure absorb conveyor, make sure the smooth of materials when cutting. Working with auto feeding system, can meet the requirements for continous and automatic batch cutting

This machine is suitable for different kinds of textile, especially Seamless bonding fabric. It can do accurate cutting on different kinds of textile, fabrics in random figure.

It adopt crawler working table and negative pressure absorb conveyor, make sure the smooth of materials when cutting. Working with auto feeding system, can meet the requirements for continous and automatic batch cutting.


Woring Size : 1600*3000mm

Laser Type : Sealed CO2 Glass Laser Tube

Laser Power : 80W/100W/130W/150W

Transmission Mode : Belt and Guide Rail

Drive System : Mix Servo Motor

Control System : DSP Offline / USB

Compatible Software : Autocad/Coreldraw/Photoshop

Voltage : 220V/50Hz(110V/60Hz)

This machine is suitable for different kinds of textile, especially Seamless bonding fabric. It can do accurate cutting on different kinds of textile, fabrics in random figure.

It adopt crawler working table and negative pressure absorb conveyor, make sure the smooth of materials when cutting. Working with auto feeding system, can meet the requirements for continous and automatic batch cutting.

This machine is suitable for different kinds of textile, especially Seamless bonding fabric. It can do accurate cutting on different kinds of textile, fabrics in random figure.

It adopt crawler working table and negative pressure absorb conveyor, make sure the smooth of materials when cutting. Working with auto feeding system, can meet the requirements for continous and automatic batch cutting.

Product Description
1.Working pressure: up to 9000 psi

2.Working temperature:-20 to 200 Celsius Degree

3.Size: 1/8" to 1 1/2" (Fractional Tube) or 2 to 38 mm (Metric Tube)

4.Diverse materials and configurations are available.

5.Precision machined components ensure perfect deformation of the ferrules and tubing.

6.Hardened threads and smoothed surface finishes extend fitting life and prevent sticking of the matching threads.

7.Radius junction design with elbows provides smooth flow path.

8.Every fitting is stamped with size, material, and heat code

9.Fittings are easy to disconnect and retighten.

Dummy Load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves.


5W SMA RF Termination, dummy load 6/8/10/12/18/26.5GHz 50ohm
Norminal Impendance 50ohm
Frequency range DC-6/10/12/18/26.5GHz
VSWR
6GHzâ?¤1.2
18GHzâ?¤1.3
26.5GHzâ?¤1.35

Power rating 5W
Temperature range -55 to 125
5W SMA Termination load RF dummy load 6GHz 8GHz 10GHz 12GHz 18GHz 26.5GHz 50ohm

Spiral Conveyor is based on a new and innovative technology, which provides many features and benefits. A spiral conveyor needs less floor space than conventional conveyors and is also faster and more reliable than any elevator or lift. All spiral conveyors are made to order and accommodating most requirements relating to the location of the in and out feed tangents. All configurations can be operated up or down in a clockwise or counterclockwise rotation and can optionally be reversible. The position and length of the in feed tangent on up spirals and out feed tangent on down spirals can be customized to meet specific layout requirements.
Spiral chain plate conveying is divided into downward conveying and upward conveying, which can be selected according to different transport materials and technological requirements, which is the best equipment for vertical transportation on the upper and lower floors.

Features:1. Intelligent PLC control, graphical interface
2. The inside of the hopper is smooth and has no dead angle. The mixture is sealed to prevent dust from entering and cross-contamination.
3. Configure anti-misoperation discharge butterfly valve
4. Easy to operate, maintain and clean
5. Mobile hopper is convenient for transferring materials, convenient for loading and unloading
6. Mixing time and mixing speed can be adjusted through the touch screen to ensure good mixing effect, automatic positioning of the system, automatic fault prompts and alarms.
Model: HTP-1200
Mixing speed: 3-8rpm
Hopper volume: 1200L
Maximum load volume: 960L
Maximum load capacity: 550Kg
Main power: 7Kw
Weight: 2200Kg

1. Brief description

This machine is a fully automatic paper cone production line for textile industry. It consists of paper cone winding unit, cone drier, and paper cone finishing unit. The complete production process:Jumbo paper reel feedingInside and outside printingPaper edge grindingpaper cuttingpaper cone winding&trimming Paper cone dryingUnfinished products collectingHead curling(Bull nosing)Grinding V-shaped notchingLine pressingFinal products collecting. One set of cone mold will be delivered together with the machine. Extra mold needs extra payment.

Configurations&Features

-- Controlled by Delta PLC, Delta Inverter, and Delta touching panel

-- Paper cutting driven by Taiwan Airtac cylinders. Durable&Easy adjustment

-- Paper patterns delivered by Precision linear module driven by servo motor. High-precision& Long service life

-- Sucking paper on spindle by Japan Orion vacuum pump. Long service time

-- Cone winding driven by Delta servo motor. Rolling circle can be set freely. Winding tightly.

-- New vertical type cone finishing machine: Simple machine, not complex. Machine runs very stably. Easy operate, less maintenance. Only a few of parts need to be changed when cone size changes.

-- If you need to produce different size cone, only need to change 2pcs mold and adjust the position of paper cutting blades. Very easy and convenient.

(N+1)Ã?1 Multimode Pump and Signal Combiners can be used for high power fiber lasers and fiber amplifiers. These devices can be used to combine several pump lasers and couple that power with a seed signal. Manufactured using our proprietary methods, the product series includes (6+1)Ã?1, (18+1)Ã?1, (36+1)Ã?1 and other reasonable configurations are available.

RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc.

Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers.

High power Optical Fiber Components:
-Optical Fiber Isolator, up 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;

Polarization Maintaining Fiber Components:
-In Line Polarizer/Depolarizer;
-In Line Faraday Isolator;
-Optical Circulator;
-Fused WDM / Coupler;
-Filter WDM / Coupler;
-Fiber DWDM
-Fiber Mirror;
-Faraday Rotator;
-Fiber Patch cord / Jumper;
-PLC Splitter Module;
-Tap / WDM / Isolator Hybrid;
Manual Variable Optical Attenuator;
-1x2 Polarization Beam Splitter / Combiner (PBS/C)
-1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)

Ruik's Fused couplers are used to split optical signals between two fibers or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

Fused PM Fiber Standard Coupler

Features Applications
High Power Handling Coherent Communication
Low Insertion Loss Power Monitor
High Stability & Reliability Fiber Sensor

Specifications
Parameter Unit Value
Center Wavelength nm 1550
Operating Bandwidth nm �20
Max. Excess Loss dB 0.8
Min. Extinction Ratio dB 18
Min. Directivity dB 50
Max. Return Loss dB 55
Max. Optical Power(CW) W 1
Fiber Type - PM 1550 fiber / HI1060
Package Dimension mm �?3*54
Operating Temperature -5~+75
Storage Temperature -40~+85
Splitting Ratio Tolerance
50/50 % �4.8

40/60 % �3.9

30/70 % �2.5

20/80 % �2.3

10/90 % �2.1

5/95 % �1.4

1/99 % �0.5

Company introduction;

High power Optical Fiber Components:
-Optical Fiber Isolator, up to 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;

Polarization Maintaining Fiber Components:
-In-Line Polarizer/Depolarizer;
-In-Line Faraday Isolator;
-Optical Circulator;
-Fused WDM / Coupler;
-Filter WDM / Coupler;
-Fiber DWDM
-Fiber Mirror;
-Faraday Rotator;
-Fiber Patchcord / Jumper;
-PLC Splitter Module;
-Tap / WDM / Isolator Hybrid;
Manual Variable Optical Attenuator;
-1x2 Polarization Beam Splitter / Combiner (PBS/C)
-1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)

Mainly used for cutting EPE sheet horizontally and vertically. The tooling is automatically adjusted instead of the traditional manual tooling adjustment.

Operating Principle: Configurating the required machining dimension by PLC servo motor, and locating the length by our patented variable speed controlling roller.

Performance Advantage:
1.Instead of adjusting knifes by manpower, it could adjust knifes automatically, which greatly improves the production efficiency and makes the operation more easier.
2.Using Mitsubishi PLC from Japan and Weilun touch screen from Taiwan, which operates steadily with high precision.
3.Controlled by Electromagnetic clutch, the cutting speed is much faster.
4.It could reduce the wastage of the front and tail edging material. The wastage of this machine is about 10mm for both the front and tail edging material, but the wastage of similar machine in the market is about 60-90mm.

Introduction

Grand-Mix (GM) consists of the latest generation scraper, brush and high capacity magnet, combined them into a simplified and rugged tool, which has an integral magnet section to capture ferrous debris, scrapers to dislodge difficult to-remove debris, and brushes to disturb the sheath and any other fluid build-up on the inner wall of the casing or liner. The tool can be run in the inner production riser, casing, and liner to remove a combination of scale, rust, mud film, drilling debris, ferrous debris, and pipe dope.

Features
One tool carries scrapers, brushes, or magnets on the same mandrel.

Large flow area between magnets to capture large debris.

Brush component can be readily redressed at remote locations.

Available with any tubing connection to run directly on the completion tubing.

Application

the Grand-Mix can be configured for any Casing and Tubing combination with matching metallurgy and connections

Baby Electric Motorcycle
Produce name:
Kids Electric Motorcycle, Children Electric Motorcycle, Kids Electric Motorbike Kids Ride On Car,Kids Operate Toy Cars
Item NO: 380
Material : New PP plastic
Color: Blue, White, Brown
Power
Configuration: 1. 6V 4.5A Battery*1pc 380 Motor*1pc
Functions
1.Multi-music, can change into English songs
2.MP3 USD SD card interface
3.Flashing light
4.Early childhood education functions
5.Pedal accelerator (at the right footstep)
ITEM SPECIFICATIONS
Packing
Carton Size : 89*42*29cm(0.108m)
Package : 1pcs/ctn
Net Weight: 6.5kg
Gross Weight: 7.5kg
Loading Quantity: 629pcs/40HQ 240pcs/20GP

Electric Motorbike For Kids
Produce name:
Kids Electric Motorcycle, Children Electric Motorcycle, Kids Electric Motorbike Kids Ride On Car,Kids Operate Toy Cars
Item NO: 2988
Material : New PP plastic
Color: Blue, Pink , Red
Power
Configuration: 1. 6V 4.5A Battery*1pc 380 Motor*1pc
Functions
1.Multi-music, can change into English songs
2.MP3 USD SD card interface
3.Flashing light
4.Early childhood education functions
5.Pedal accelerator (at the right footstep)
ITEM SPECIFICATIONS
Packing
Carton Size : 78*64*40cm(0.200m)
Package : 2pcs/ctn
Net Weight: 13kg
Gross Weight: 14kg
Loading Quantity: 680pcs/40HQ 260pcs/20GP