Find Verified Fruits Suppliers, Manufacturers and Wholesalers

FEATURES
3s statistical interval, continuously record 168h
Support multi-brand current transformer
Up to 32G data storage space
Record up to 461 power energy parameters simultaneously
Up to 10000 screenshots saved
Support periodic recording function
Up to 3.9M/s USB high-speed transfer
Recording wave

FUNCTIONS
Energy loss calculator: classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available).
Power inverter efficiency: simultaneously measure AC output power for power electronics systems.
Power wave data capture: GF438II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
Waveform capture: GF438II capture 50/60 cycles (50/60Hz) of each event that is detected in all modes, without set-up
Automatic transient GF438II analyzers capture 200 kHz waveform data on all phases simultaneously up to 1000V.
Fully class-A compliant: GF438II analyzers conduct tests according to the stringent international IEC 61000-4-30 class-A standard.
Mains signaling: GF438II analyzer measure interference from ripple control signals at specific frequencies.
Troubleshoot: analyze the trends using the cursors and zoom tools.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
Measure all three phases and neutral: with included four flexible current probes with enhanced thin flex designed to fit into the tightest places.
Automatic trending: every measurement is always automatically recorded, without any set-up.
System-monitor: ten power quality parameters on one screen according to EN50160 power quality standard
Logger function: configure for any test condition with memory for up to 600 parameters at user defined intervals.
View graphs and generate reports: with included analysis software.
Battery life: up to 5 hours operating time per charge on Li-ion battery pack.

NEW AUTOID Pad is compact and industrial tablet with portable and industrial protective design. It concentrates on providing more cost-effective mobile solutions to enterprises. It is adfull-view high definition screen, high-end capacitive touch, which supports finger touchable operation-with or without gloves even wet, Cortex-A53 Quad Core 1.2GHz, Android 5.1 OS. It supports shortcut keys operation, Multiple options of barcode, NFC, Camera, GPS, RS485, Wi-Fi, 4G, Bluetooth, OTG, etc,. It fully meets the demands on the informatization of industrial applications.

Seuic(https://www.chinaautoid.net/) is dedicated to technology on data collection of Internet of things and research for AIDC technology,combined with complicated industrial environment to research and produce handheld data collection terminal,and provide mobile solutions for various industries.

NEW AUTOID Pad Characteristics and advantages

Excellent performance of man-machine interaction:
With 7" industrial display, 1280*800 highdefinition, 5-place touchable, it's convenient to see more details of reportsclearly. 11mm industrial and thin body, main machine adopted streamlineddesign, it is only weighs 485g, which is comfortable grip and easy to carry.

All-weather application design:
It fully meets the operations under the heat, cold, rain and snow and other harsh environments, and satisfies the operation for along time.

Leading performance:
It supports 2.4/5Gdual-band WIFI simultaneously,optimizes roaming design, which solve the problems of roaming, electromagneticinterference, offline in warehouse. With the usage of N6630 barcode scanengine, special rapid deployment technology of camera, safety managementmechanism, which remotes management and supports 4G and NFC.

Remote management and security design:
There are double security solutions, one is Appmanagement of installation rights, another is mobile manager with ourindependent intelligent property right to ensure data security. There aretriple management designs, mass installation of configurations and software, online update, which remotes management and maintenance.

lStrict reliable design:
Under the "reliability from the inside to outside"design concept, it strengthens the device overall rigidity, which meets thestrict industry standards. It has been through multi-stringent reliability testto ensure the product stability, greatly avoid all kinds of accidents inindustrial environments.

Potassium perfluorooctylsulfonate (fc-95)

Cas:2795-39-3
Trade name: fc-95
Chemical name :potassium perfluorooctylsulfonate
Heptadecafluorooctanesulfonic acid potassium salt
Perfluorooctanesulfonic acid potassium salt
Fc-95
Fc-80
Structure formula :cf3(cf2)7so3k
Molecular formula: c8f17so3k
Molecular weight: 538
Mf: c8f17so3k
Mw: 538.22
Assay: 98%
Appearance: white powder
Mp 285 â°c
Surface tension: 22mn/m (1%aqueous solution)
Decomposed temperature: 390â°c
Surface tension: 22mn/m
Application: it is perfluoro anion surfactant which mainly used as chrome fog depressant and wetting agent for electroplating and additive in fluoro protein fire foam fighting.
Package: 25kgs/drum
Shipment: general chemical
Hs:2942000000

Soft PVC mugs mainly have whale kangaroo dinosaur etc cartoon figure and animal, landscape and fruit image. Meanwhile we also launch couple-mugs, zodiac mugs and reflecting the current theme and owns deep meaning image mugs. These type mugs with high tensile strength, good elongation and strong flexibility. Whatâ??s more, it is anti penetration, anti ozone, anti-aging, anti-corrosion, heat-resisting, low temperature resistance and softness. Mainly used in business gifts, advertising gifts, promotion gifts, children gifts, white-collar workersâ?? gifts, European countries and trading company. Of course, color, style, size, image, logo etc Shenzhen Alitonda Gifts Technology Co.,Ltd can customize according to your needs.

48 Core ODF/Fiber Optic Terminal Box FC Type is a major sub-system within the overall K&M Technology solution, bringing new levels of flexibility, functionality and accessibility to highdensity fiber management systems. The 1U Panels modular design and building block configuration approach make it suitable for virtually any passive optical network application regardless of network size, network topology, installation environment, fiber type, or fiber termination methodology.

Pi160 series frequency inverters were designed base on new software and hardware platform by
Powtran , which is a type of high performance, compact size, attractive and durable economic vector control frequency inverter, with low-speed and high-torque, perfect protective functions, especially used for mini-machines, small automatic production lines and so on

Control system:adopt dsp core processor of high performance vector control, power ic use mitsubishi ipm module and infineon pim integration module;
Control terminal configuration: 7 ports digital input or input pulse, 2 ports digital output(spa and a relay), one analog input, one analog output, standard rs485 communication terminal, realize the pc and internet communication;
The output signal:42 kinds of signals are available
Frequency set:8 kinds of frequency set way, including dc~10v, 0-20ma range can be adjusted;
Protection function, over voltage protection, under-voltage protection, over current protection, overload protection, overheating protection, over-volt speed loss protection, external fault protection communication.Error, pid feedback signal abnormal protection

Pi500series high-performance vector control inverter is based on the companys many years design, production, sales experience, suitable for all kinds of industrial machinery, fan&water pump drive control and heavy industry such as medium frequency grinding.Products in duct design, hardware configuration, software function, installation design has greatly improved the customer ease of use and environmental adaptability, function optimization, application is more flexible, more stable performance , greatly improve the product reliability.

Technical features
1.Advanced motor drive technology
2.Steady speed precision, wide speed range
3.Low speed with high torque small torque ripple
4.Precise motor parameter self learning
5.Instantaneous power off dont stop function
6.Meet the international standard of wide voltage input range
7.Emc design specifications improved
8.Meet a number of certification standards
9.Independdent air duct design
10.Anti-corrosion paint spraying process
11.Thermal reliability of the machine
12.Machine temperature rise test
13.Long life design
14.New generation energy saving running
15.The compact design to improve the speed of realizing machines minimizing
16.Over-excitation function
17.Various kinds of terminals functions, easier for operation
18.Built in self-adjusting pid function module
19.Easy to use pc software
20.Communication interface application is very flexible
21.Supporting various kinds of installation ways
22.Simple maintenance

Normally a sheet metal laser cutting machine is priced at rmb 400, 000 to rmb 1, 000, 000, varying on brands, models and configuration.
Gd. Hans yueming laser group, co. Ltd., a subsidiary of shenzhen hans laser technology co. Ltd (stock code: 002008), is a hi-tech company and a professional laser equipment manufacturer with a strong r&d team and experienced sales force. 18 years into business, headquartered in guangdong, hans yueming laser has established modern factories in dongguan, jiangsu, and shanghai with total floor area of over 100, 000 square meters and boasts over 100 processing units, a highly skilled workforce with more than 500 staff members, a wide range of laser equipment with 10 product lines and over 100 models, and an annual capacity of over 10, 000 sets of lase equipment.
Hans yueming laser has introduces a serial of sheet metal laser cutting machine, varying on the size of working area, exterior design and configuration. For example, cma0606-d-g-b laser cutting machine is a sheet metal laser cutting machine with a 600mm*600mm working area, suitable for the cutting of glasses frame, metal chips and sheets where precision is demanded. This model boasts of efficiency, precision and of being room-saving. Cma1530-c-gh-d is another model of sheet metal laser cutting machine. This model has a much larger working area---1500mm*3000mm, suitable for the cutting of large metal and non-metal sheets used in making kitchenware, lamps, equipment cabinet, car accessories, fridge, air conditioning, elevator, etc. Ymshichangbu2018
Hans yueming laser is a national brand for laser equipment. Among its stellar range of laser equipment is sheet metal laser cutting machine, which has become a synonym for precision, efficiency, cost-effectiveness.
If you are interested in our sheet metal laser cutting machine, please contact us at any time

high pressure 4 ton steam boiler for hotel

The gas or oil fired steam boiler is the fire tube boiler with 3 pass. The boiler adopts the bias furnace and wet back structure. The high temperature smoke flows through the first, second and third smoke pipes in turn. And then the smoke can be discharged into the atmosphere through the chimney. The boiler is provided with the movable front and back smoke boxes covers. So that the boiler is easy to overhaul. Also our boiler is equipped with the burner in great performance. The boiler is also with the functions of automatic combustion adjustment, automatic water feeding regulator, automatic program start or stop, automatic operation and other advanced technology. Besides, our boiler has the functions of high and low level alarm and limit low water level protection, over high pressure protection and automatic flameout protection function. The utility model boiler has the advantages of compact structure, safety, simple operation, quick installation, little pollution, low noise and high efficiency.

features of horizontal 1 ton gas steam boiler

1. The flue gas process adopts the 3 pass smoke pipes layout. The boiler is with full butt welding wet back structure and corrugated furnace. The screw thread smoke pipe is arranged in convection area. There is a long flue gas flow process in the boiler. So that the boiler is with a great heat transfer effect;
2, compact structure, simple and easy installation, less infrastructure investment
3, according to user requirements, the boiler can be configured with different fuel burner to adapt to different fuels: natural gas, liquefied petroleum gas, light oil and so on;
4. Meters and valves are also matched with the boiler. We selected top qualified accessories for the boiler and we can not only ensure our boiler quality but also we can provide all the accessories a 2 years warranty.

500w fiber laser cutting machine, referring to laser cutting machine equipped with a 500W fiber laser generator, is a low-power model mainly for the cutting of metal sheets, which are widely used in advertising, lightning, metal processing and other industries. It is cheaper than high-power models.

Then how much does a 500w fiber laser cutting machine cost? Well, it depends on brand and model. 18 years into business, we often receive customer feedbacks that home-made laser generators are no inferior to imported ones. We offer nothing but the best components, home-made and imported alike, for customers to choose from. As is known, imported components usually cost more than home-made ones because of the myth that machines equipped with â??importedâ?� configuration always have more stable performance. Nevertheless, as domestic manufactures have better laser generators to offer, many of our clients start turning their eyes back from overseas because test results show that home-made components are no inferior to, sometimes even better than, imported ones, which, however, cost much more. More important, they trust Hanâ??s Yueming Laser for our 18-year technical experience and our good reputation and they believe that a reputed brand ensures fine product quality.

CMA1530-C-G-D 500w fiber laser cutting machine
1. Gantry rack transmission system, double AC servo motor, gear synchro-driven system, maximum acceleration up to 0.8G, ensuring high speed & accuracy operation;
2. Intensive chassis with high rigidity. Processed by large gantry milling machine through tempering and vibration aging, non-stress limiting the shape variables and stress relief of the machine within 0.02mm;
3. 500w fiber laser cutting machine adopted high-performance fiber laser generator, ensuring the high-quality-outcome of steel sheet processing;
4. Professional steel plate cutting software, easy to master and operate, lowering down the requirement of operating personnel;
5. Dedicated servo motor system for high performance fiber laser cutting, high-speed and real-time response, ensuring the conformity of cutting outcome;
6. Ultralow operating cost: 3~4KW/h (for laser generator only), 500w laser cutting machine able to cut sheet metal with compressed air.

CMA1530C-G-A 500w fiber laser cutting machine, introduced by Hanâ??s Yueming Laser Group, Co. Ltd., is perfect for the cutting of metal sheets to the satisfaction of metal processing industry. This model has been very popular among our clients at home and abroad.

-

CAS:2795-39-3 Trade name: FC-95 Chemical name :Potassium perfluorooctylsulfonate HEPTADECAFLUOROOCTANESULFONIC ACID POTASSIUM SALT PERFLUOROOCTANESULFONIC ACID POTASSIUM SALT FC-95 FC-80 Structure formula :CF3(CF2)7SO3K Molecular formula: C8F17SO3K Molecular weight: 538 MF: C8F17SO3K Mw: 538.22 Assay: �98% Appearance: White powder Mp 285 °C Surface tension: 22mN/m (1%aqueous solution) Decomposed temperature: 390°C Surface tension: 22mN/m Application: It is perfluoro anion surfactant which mainly used as chrome fog depressant and wetting agent for electroplating and additive in fluoro protein fire foam fighting. Package: 25KGS/DRUM Shipment: general chemical

PRODUCT DESCRIPTION
Hammer union importing international advanced technology, is forged with high-strength alloy steel, strict heat treatment process can ensure that the union have uniform metallurgical structure and pressing ability and the material meets ASTM and AISI Standard and the technology indexes conform to API Spec 6A, the product adopts some end connections of pipeline thread, tubing thread, butt-weld and compress-seal. The type mainly consists of: fig100, fig200, fig206, fig207,fig400, fig602, fig1002, fig1003, fig1502.
Fig 50. Orange Nut - Orange Subs
These low pressure and suction union of Fig-50 are made from carbon steel. The nut and O-ring are common in both sizes. Available in 4" or 5" sizes in threaded & socket welded connection. These unions are suitable for 500 PSI wp.

Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line.

JXD-8 wedge clamp
Main wire range: 185-240
Branch wire range: 70-95

Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line.

JXL-2
Main wire range: 120-150
Branch wire range: 120-150

JXLD series wedge clamp grounding clamp and insulation cover Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line.

Main wire range: 35-95mm2
Branch wire range: 35-95mm2

Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line.

JXD-1
Main wire: 35-50
Branch wire: 35-50

Emergency lighting battery
Emergency lighting battery ni-cd
Ni-cd battery pack d4000mah 2.4v tag
Model number: 2gs-d400t-a(t)
Product name: ni-cd rechargeable battery pack d4000mah 2.4v
Place of origin: guangdong, china (mainland)
Brand name: godson or oem
Type: ni-cd
Size: d
Configuration: side by side
Nominal voltage: 2.4v
Nominal capacity: 4000mah
Standard charge mode: 0.1c for 16 hours
Cycle life: 00 times
Operating temperature : (-20) - (+70)
Storage temperature: (-30) - (+60)
Cell dimension: 33 +0 -1.0(d), 60.0+0 -1.5(h)
Cell weight: 110g
Expected life: 5 years
Packaging: standard export package or customized package
Emergency lighting battery ni-cd
Ni-cd battery pack d4000mah 2.4v tag
Model number: 2gs-d400t-a(t)
Product name: ni-cd rechargeable battery pack d4000mah 2.4v
Place of origin: guangdong, china (mainland)
Brand name: godson or oem
Type: ni-cd
Size: d
Configuration: side by side
Nominal voltage: 2.4v
Nominal capacity: 4000mah
Standard charge mode: 0.1c for 16 hours
Cycle life: 00 times
Operating temperature: (-20) - (+70)
Storage temperature: (-30) - (+60)
Cell dimension: 33 +0 -1.0(d), 60.0+0 -1.5(h)
Cell weight: 110g
Expected life: 5 years
Packaging: standard export package or customized package

TOP FEATURES:
- Gold-platted, hi-quality, low-loss RF connector.
- Includes mathcing washer and nut.
- UL-V0 flammability grade.
- RoHS compliant.
- On stock ,if no stock 3~5days make shipment
- High quality with competitive price

Spec.:
Mfg Part Number SMAFR-178150U
Manufacturer ANNXIN
Product Condition New
OK for Outdoor Use No
Vehicular No
Weight (lbs) 0.1
Cable Type:RG178
Cable Length (inches) 6
Cable Length (mm) 150
Connector1 RP SMA-Female
Connector2 U.FL/IPEX/MHF
Ground Plane Required No

Application:
U.Fl. female (IPEX) to Reverse Polarity SMA male pigtail, ideal for:

connections to external hi-power antenna of an internal minipci or minipci express board
connection of wireless board to antenna in intgrated designs like routers, AP, WISP outdoor enclosures
patch to other reverse polarity SMA cable asseblies
Please enquire about custom material, alternative cables & configurations, as well as further volume pricing.

Sst series of soft starters integrated with built-in bypass can greatly reduce the construction cost in its application.It adopts top branded components like scr module made by german semikron and the main control chip dp by italian stmicroelectronics.It features alloyed body design with high strength, control unit with internal power supply design, set-free rapid deployment, and the compacted configuration.
The applicable standards:iec 60947-4-2:2202

Pixels 5.95mm
Pixel density 28224dots/sq.m
LED configuration 1R1G1B
LED type SMD2727
LED module size 250x250mm
Driving mode 1/7 scan
Control System LINSN
Lifetime 100,000 hours