Find Verified Fruits Suppliers, Manufacturers and Wholesalers

This automatic wire cut strip tin dip soldering machine has automatic wire feeding, wire cutting, double-end peeling, double-end twisting, double-end tinning and 8 wires can be processed at the same time, has the function of automatic smoking, which can reduce the harm of flux smoke to human body and can automatically send tin wire, the insulations can be automatically collected in the bag after stripping, the operation screen KINCO7 inch all version, the computer turns the knife, does not need the pad gasket, controlled by computer, including wire length, stripping, stripping length, tin dipping depth, etc.

Model: DG-01BS
Power supply: AC220V/50/60HZ single phase
Function: wire cutting, single-end stripping, double-end stripping, single-end partial stripping, double-end partial stripping, double-end twisting, single-end tinning, double-ended tinning, can be customized for ribbon cable.
Wire processing range: AWG# 32- AWG#18, wire diameter from 0.6MM to 3.2MM
Productivity: 7000-13000 pcs/hour, (depending on the wire)
Cutting length: 10-600MM (special length can be set)
Cutting accuracy: 0.20.02 L (length)
Stripping length: 0-7MM (customized above 7mm)
Twisted line length: 3-7MM
Dip tin length: 0.5-7MM
Air pressure: 5-6 kg
Machine size: 1210 770 1370 (without protrusions)
Body weight: about 400kg

Main component configuration
The machine uses Hechuan servo motor: (6 sets)
Pneumatic components: solenoid valve + cylinder + air pipe (SMC)
Air pressure detection: SMC
Screw guide: Taiwan HIWIN
Controller: US RAM computer control system
Color touch screen: KINCO
Full CNC debugging: knife size, stripping length, tinning depth

High pressure low torque Plug Valves are available in 2" X 2" and 2" X 1". They come in multiple bores and are available up to 15,000 PSI for standard service and 10,000 PSI for H2S or sour gas service. Our plug valves are pressure balanced type and have replaceable metal liners between the body and plug. Repair kits are also available to increase their life and make them perform safely for longer. These manually operated valves are fitted with high stem torques and manual gearboxes.

These Plug Valves are designed to meet the needs and requirements of the oilfield. They can withstand the high erosion rates and pressures encountered in today's operating environment.

Working Principles and Features:

The plug valve consists of the valve body, plug cap, plug and etc.

The plug valve is available with the union 1502 inlet and outlet preparations (also available upon customer request). The cylinder body inner wall and side segments work together with the rubber seal segments to provide sealing.

The metal-to-metal sealing is available between the side segments and cylinder plug, featuring high precision and reliability.

Honorary Ceitificate:
Our products have been ISO9001 certified and attained API 6A,6D,API 7,7K,and API 16A&16C approvals of American Petroleum Institute.All products are fully designed and manufactured in accordance with API,ANSI,GB(national standance)and SY(industry standards)standards.

EPS30-4815AF Power System
The AC-powered cabinet uses the EPS30-4815AF power system to convert the AC input into the DC power for power distribution.

Function
The EPS30-4815AF power system converts one AC input into two DC outputs to implement the DC power distribution. It can be connected to one set of batteries and use its monitoring module to manage the batteries.

The EPS30-4815AF power system can also use the external sensor transfer box to collect and report the status of sensors and standby detected parameters.

NOTE:
The rectifier modules of the EPS30-4815AF power system work in the load balancing and mutual hot backup mode.

Appearance
Figure 4-1 shows the appearance of the EPS30-4815AF power system.

Figure 4-1 Appearance of the EPS30-4815AF power system

We have four different models of 3-axis wire bending machines. These machines implement different bend processingâ??s according to the fitted bending equipment and the required bend type. The wire bender takes wire directly from the coil, straightens it, bends it, and cuts it by using built-in software to produce the right bend.

Our wire bending machine is configured with two bending turrets for clockwise and anti-clockwise rotation. It allows multiple bending technologies to perform on the same cycle. Our wire bender is the best machine for performing 3-d bending.

We have four different models of 3-axis wire bending machines. These machines implement different bend processingâ??s according to the fitted bending equipment and the required bend type. The wire bender takes wire directly from the coil, straightens it, bends it, and cuts it by using built-in software to produce the right bend.

Our wire bending machine is configured with two bending turrets for clockwise and anti-clockwise rotation. It allows multiple bending technologies to perform on the same cycle. Our wire bender is the best machine for performing 3-d bending.

Seal rings are fully interchangeable with SPM or FMC equivalent products.
Union and the AQE swing joint are applicable to cementing trucks, fracturing trucks, various manifolds, pipelines and other high pressure equipment, which are important fittings to transfer oil, water, fracturing fluids and mixed liquids. The wellhead equipment China are made of high quality steel forged by metal process. The model of union; FIG602, FIG1002, FIG 1003, FIG 1502, FIG2002, FIG2202; rated: 5000Psi ( 35MPa ) , 10000Psi(70MPa). All unions are made in English system, and can be interchanged with products in international market. Seal rings are fully interchangeable with SPM or FMC equivalent products

OLT ZTE C320 OLT GPON With GTGO GTGH 8 Ports 16 Ports 32 ports 1G 10G DC Uplink Board with U31 zte olt zxa10 c320

Products Description:

With the requirements of communication services increasing, the value-added services (VAS) including 3D network games, video conference/phone, Video on Demand (VoD) and IPTV are key means for operators to provide differential services to attract more subscribers, and gain income growth.

ZTE ZXA10 C320, a small size, full-service optical access convergentplatform, provides carrier class QoS and reliable network to meet the requirements for small-scale implementation of FTTx services.

OLT ZTE C320 GPON OLT With GTGO GTGH 8 Ports 16 Ports OLT GPON 1G 10G DC Uplink Board FTTH solutions

Key Features:

Unified platform for GPON,XG-PON1 and P2P
Small size andcompact design, flexible network and fast deployment
2U frame with 2 service slots, compatible with ZXA10 C300 line cards
Abundant service support capability: IPTV, VoIP, HSI, VPN, mobile backhaul, etc
Higher security assurance: ONT authentication, user ID identification, port isolation, address binding, packet filtering, and broadcast packet suppression.
High reliability: key parts redundancy; support Type B and Type C protection for PON downlink and LACP/ UAPS/STP/ERPS for uplink
Service differentiation: Comprehensive QoS mechanisms for voice, video and high speed Internet services.
Support DC input redundancy
Support AC power supply
Support 1:1 protection for PON interfaces
Support 1:1 protection for SW (core card) card
Support 1588V2 and Synchronous Ethernet
Support embedded OTDR in SFP
Syetem Architecture:

Capacity:

GPON up to 32 ports
Uplink interfaces up to 4 *GE (Optical )+2*GE(Electronic) or 2*10GE(Optical )+2*GE(Optical ) +2*GE(Electronic)
Chassis Configuration (19â??):

Total 5 slots
2 slots for universal line cards
2 slots for switch& control cards
1 slot for fan module
Subscriber Card Density:

GPON card: 8/16 ports per card
XG-PON1 card: 8 ports per card
P2Pcard: 24/48 ports per card
Uplink interface card:

1*10GE optical port ( Configurable 1*GE optical port)
1*GE optical port
1*10 M/100 M/1000 M electrical Ethernet port
Common interfaces:

1*environment detecting interface
1*management interface
1*maintenance serial interface

1x Multimode Dual LC fiber Optical Port: 1.25Gbps, 850nm wavelength, support Gigabit Ethernet; 1x RJ45 Port: 10M/100M/1000M, supports Full/Half Duplex auto-negotiation and MDI/MDIX auto-crossover.
Equiped with high-quality chip to ensure stability and Ultra-low time-delay data transmission. Complies with IEEE 802.3/802.3u/802.3z/802.3ab, 10/100/1000Base-TX/FX. Supports jumbo frame size 9K byte.
Modulization configuration design, support hot-swappable, plug and play. And LED indicators for TX, FX LINK/ACT, POWER, FDX can dynamic feedback link connection state and fault detection to easily monitor network status.
Only 93mm x 72mm x 27mm(3.7"x 2.8"x 1.1") in measurement. Its compact modular design facilitates deployment in a narrow desktop location to save space.
Product List: 1x Gigabit Ethernet Media Converter, 1x 1000Base-SX SFP module, 1x DC Power Adapter, 1x Product Manual. 30-day Money-Back guarantee, lifetime tech support.

The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure itâ??s reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Power supply 12~36VDC with over voltage and phase-reversal protection;
3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols;
4. DO1 support PWM output;

5. Management and configuration via LAN connection configuration software for easy operation and maintenance;

6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter;
7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output;
8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;
9. High sampling frequency and special filtering strategy to ensure reliability;
10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules;
11.Supports register mapping function and extend I/O inquiry strategy;
12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

The PLC Gateway D225 is a converter for converting the data protocol of Mitsubishi PLC into Modbus TCP RTU protocol. The D225 can store the I/O data of the PLC to the gateway through the RS-232 or RS-485 serial port of Mitsubishi PLC. The gateway transmits the data to the cloud platform through the Modbus protocol, and also allows your software to pass through the local area network anywhere. Or Internet access to serial port devices.

1.Built-in industrial grade ARM CortexTM core, high performance, low power consumption, stable and reliable.
2.Converting the data protocol of Mitsubishi PLC into Modbus
TCP protocol,then connect to cloud. Support 1 channel RS-232, 1 channel RS-485 and 1
channel TTL.
3.Support 1 channel RJ45 Ethernet port
4.Support RESET button to restore factory function (long press for 3 seconds to recover) to prevent parameter setting error.
5.Using metal shell material, protection grade IP30, metal shell and system safety isolation, especially suitable for industrial control applications.
6.Using configuration software to set device parameters, support WIN XP, WIN 7, WIN 8 and WIN 10, friendly interface.
7.Support static IP address or DHCP to obtain IP address automatically, and query the devices in the network through UDP broadcast protocol.
8.Support local HMI touch screen and remote simultaneous access to PLC for data acquisition and monitoring.
9.Support server domain name resolution. Support firmware upgrade through TTL, firmware update is more convenient.

The IoT10 Series wireless temperature and humidity IoT sensor are low power comsuption design,it is a wireless Internet of things gateway, designed for converting DS18B20 Temperature sensor signal to Wireless communcation over SMS/GPRS/3G/4G/NB-IoT Cellular Network, and connect to the IoT Cloud Platform.Widely used to real time remotely monitoring temperature of Refrigerator freezer, chicken factory, chemical plant, food production and storage, warehouse, hospital etc.

1. Can be used as a complete product or as a secondary development module;

2. Two working modes are available:

Normal mode: Real-time data transmission,Users can inquiry the real-time status;

Low power consumption mode: Ultra low power consumption(ï¼?230uA);

3. Multiple communication methods:GSM,GPRS,3G,4G,NB-IoT,LoRa,Ethernet,etc;

4. Coverting DS18B20 temperature probe signal to cloud platform over cellular network;

5. Support configure parameters and query real-time data via SMS,software,cloud platform;

6. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message;

7. Support two different server centers,can set IP address or domain name ;

8. Support Modbus RTU over TCP and MQTT protocol;

9. Wide range power supply 7~24VDC with phase-reversal protection;

10. Using Nano sim card,support PIN code function;

11. Provide PCBA or waterproof enclosure,can be used outside.

In this year, , an customer, visited 5 hydraulic valve factories before and after, and made samples of hydraulic relief valve with 1m inner hole for 3 times, but none of them reached the accuracy requirements. sent samples and met the standard for the 1st time, finally chose to cooperate with .

The inner hole accuracy is not enough, which is mainly caused by the different built in equipment of honing machines equipped by many hydraulic valve manufacturers. Conventional honing machines use diamond reamers., Because the main cutting part of the diamond reamer is at the tool head, the tool head wears quickly. After the head is worn, it is very easy to cause the size of the hole bottom to be small, resulting in the poor cylindricity of the whole hole and affecting the accuracy. This is the key to the 5% accuracy error. Many hydraulic valve manufacturers are not aware of this key point.

, a purchaser from a hydraulic valve in , has an inquiry for a special hydraulic relief valve, and the inner hole accuracy must be controlled within 1m. checked with the original hydraulic valve supplier, and got reply that only the hydraulic valve manufacturer equipped with high precision honing machine is able to make the hydraulic relief valve with 1m inner hole accuracy. According to the equipment configuration, has contacted with more than 10 hydraulic valve manufacturers, determined to visit 5 hydraulic valve manufacturers, and asked 3 powerful factories to sample the hydraulic relief valve. After testing and comparing the samples received from these 3 hydraulic valve factories, all failed to meet the standard. asked the manufacturer with the highest accuracy to continue to improve the proofing, and there is still 0.1m gap. The factory gave up and introduced HYDRAULIC VALVE to him, maybe can do the hydraulic relief valve with 0.1m inner hole accuracy.

According to his hydraulic relief valve drawing, we advised that we can send 1pc hydraulic relief valve quality sample after 10 days. 5 days after successfully sent the hydraulic relief valve sample, Bowen informed that the accuracy met the standard. He wanted to know why so many hydraulic valve manufacturers could not achieve 1m inner hole hydraulic relief valve, even if the hydraulic valve manufacturers promised to do so and they also have high precision honing machines, but several proofing did not meet the standard. How did hydraulic valve achieve it

Honing machine is really helpful for the machining of high precision inner hole. Due to different equipment configuration, not every hydraulic valve manufacturer can produce the hydraulic relief valve with 1m inner hole accuracy.

Automatic Protective Gowns Body Making Machine
Machine Size: 9150*3300*2000mm
Capacity: 15-20pcs/min
Machine weight: 5800KG
Voltage: 380V
Power: 26kw
Machine Material: Alloy Aluminium

Packaging: Exported Wooden Case
Remark: This� machine� is� based� on� standard� configuration,� included� belowfunctions:---Belt� welding:---Neck� cutting;---Sleeve hole cutting;---Gowns forming and cutting.Optional� function:---V neck or round neck cutting;---Pocket welding.

Automatic Protective Gown Sleeve Making Machine
Machine Size: 3700*1600*1800mm
Capacity: 60-80pcs/min
Machine weight: 2250KG
Voltage: 380V
Power: 12kw
Machine Material: Alloy Aluminium
Control System: PLC

Remark: Machine function:---Sleeve welding and cutting;---Elastic welding.

1.Wide working voltage, support 9-36V DC power supply, with anti-reverse protection design;
2. Built-in industrial grade ARM CortexTM core, high performance, stable and reliable;
3. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside.
4. 3G/4G/NB-IoT Modules are optional;
5. Modular design, can easily upgrade the cellular module if network upgrade;
6.Support 1 channel relay output for restart the devices;
7.Supports 1 channel RJ45 Ethernet port, built-in isolation transformer, up to 2KV electromagnetic isolation;
8.Up to 10 user's phone number to receive alarm and daily report SMS/Call;
9. Support monitoring power supply status and max. 7 network devices monitoring simultaneously;
10. Built-in TCP/IP protocol stack, support transparent transmission and Modbus RTU to Modbus TCP Protocol;
11.Inbuilt large capacity automatically rechargeable backup battery;
12. Industrial class design suitable for long time work applications;
13. Support configure parameters, load profiles and upgrade the firmware via PC;
14. Wall mount or 35mm standard DIN rail Design, convenient installation,
15. Metallic cover, small size, exterior dimension is L70*W88*H30mm.

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;
3. Management and configuration via LAN connection configuration software for easy operation and maintenance;
4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol;
5. 16 digital output or relay output, supports 10Hz~300KHz high speed pulse output;
6. High sampling frequency and special filtering strategy to ensure reliability;
7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;
8. Supports register mapping function and extend I/O inquiry strategy;
9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Power supply 12~36VDC with over voltage and phase-reversal protection;
3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols;
4. DO1 support PWM output;

5. Management and configuration via LAN connection configuration software for easy operation and maintenance;

6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter;
7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output;
8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC;
9. High sampling frequency and special filtering strategy to ensure reliability;
10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules;
11.Supports register mapping function and extend I/O inquiry strategy;
12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Model no S266

The S266 GSM GPRS SMS 3G 4G Temperature Monitoring Unit can be used for remote monitoring onsite temperature, once the temperature exceeds the preset value, will send SMS to 10 user numbers to alarm. also, it supports GPRS/3G/4G to transfer data to remote monitoring center,supports modbus tcp,can intergrate to SCADA,KPIIOT Cloud platform directly.
Advantages

Quad band 850/900/1800/1900Mhz GSM GPRS Module inside;

3G UMTS/HSDPA/4G Modules are optional.;

32 bit MCU, reliable performance with in-built watchdog;

Support temperature & humidity monitoring remotely in real-time;

Support 8 channel temperature input interface(DS18B20 Temperature sensors);

Support 2 relay outputs,7A@125VAC 5A@125VAC 20A@14VDC;

High/Low Alert via SMS/Call/GPRS;

Supports 1 DNS or IP address as server;

Supports Modbus TCP, TCP/IP protocol over GPRS/3G/4G network;

Automatically resend the data while communication failure, GPRS failure will alert by SMS text;

Supports remotely restart the device, and configure it by SMS commands remotely;
Up to 10 user's phone number to receive alarm and daily report SMS/Call;

Timer report, interval period 1~65535 seconds, configurable; automatically upload status/Value to the authorized numbers;

In-built rechargeable battery, power lost/recover alarm, low maintenance, 247 operation;

In-built internal clock, support 11 actions on schedule at pre-set time;
Internal 16MB memory, logs more than 200000 records;

Wall mount or 35mm standard DIN rail Design, convenient installation, Dimensions 70*88*30mm;

Support Android/IOS APP, easily & friendly for use/config.

Support remote upgrade the firmware via PC.
Can be operated from anywhere, no distance limitation;

Secure - Using caller ID and password for identification, unknown callers are ignored;

TX-80W
8 channel
Range: 50-100m
Output power: 10W each channel,total 80W

X-80W is a high power jammer, it has 8 frequency bands and each band power 10W, the output 80W in total can effectively get rid of the signal threat in seconds by jamming. The Jamming range is 10-30 meters to meet your needs as much as possible.
And the bands can include almost signals of 2G/3G/4G/Wifi/GPS, you can option freely. Need more? Contact us for customizing.



TXtelsig is the leading manufacturer to design and produce signal jamming and wireless coverage product with professional and experienced research and development teams. We have the strength to provide you with the most cost-effective products and plan.





Product Feature
1. Ultra-wideband jamming coverage and efficient frequency division ensures best signal interference of different frequency and cut off signal link in seconds
2. Each channel separate to deal with specific frequency signal as customized
3. Jamming range 10-30 meters, to get rid of signal threat at first time
4. Durable and heat-dissipation aluminum alloy shell; Of military standard being anti throw and pressure-resistant
5. One switch control, convenient and simple, one-button on/off
6. With cooling fan and multiple cooling holes form a good cooling system
7. Handheld grip design easy to carry on.





Application:
1. Conference room, Confidential office, negotiation room
2. Mobile vehicles, on-site protection of important figures in the political and business circles
3. Party and government organs, temporary meeting rooms for all kinds of small meetings of enterprises
4. Personal or commercial special needs

New Mini CNC Router 6090
This small CNC Router designed with a strong CNC Router Machine structure, very stable, and high precision. We configured this mini CNC Wood Router with 3KW Spindle, PMI linear guide, Helical Rack and Pinion, TBI ball screw to make sure its stability and precision. The compact CNC Router Machine size can be fit any small working space. And it is also very convenient to move.

Applications
This Mini CNC Router Machine is our new design with a strong wood CNC router machine structure. This 3D wood carving machine is configured with a helical rack and pinion transmission. The wood cutting machine was made especially for advertising industrial and hobby use.

Features
Compact DSP controller for CNC Wood Router, Easy to learn and use.
3.0KW Spindle, 24000RPM, ER25
Step Motors for three Axis.
Helical rack-and-pinion on X and Y axes
Taiwan ball screw on Z-axis
Precision Linear Hiwin Guide Rails for three axis
Heavy-duty one-piece welded all-steel frame
Vacuum table in zones
Available in 4â?² X 8â?², 5â?² X 10, 5â?² X 12â?² Table Sizes and with Drill Block

About FORSUN CNC
Jinan FORSUN CNC Machinery Co., Ltd., one of the professional Wood CNC Router manufacturers and suppliers in China, has been focusing on providing high-quality CNC Router Machines and solutions for worldwide customers for 20 years. Main computerized CNC machine types: Wood CNC Router, 3d CNC carving machine, Wood CNC machine, ATC CNC router, Basic beginner CNC router, Mini CNC router, diy CNC router, hobby cnc router, CNC nesting machine, Multi-Tool CNC machine, Rotary axis CNC carving machine, 4/5 Axis CNC router, CNC marble stone engraving machine, CNC plasma cutter, CNC foam cutting machine, CO2 laser cutting machine, fiber laser cutter, etc.

Forsun CNC Router helps you stay productive. We have the right CNC Router Machine tools for your application and weâ??re supporting you every step of the way.

With the improvement of the production capacity of coal mine in China, the model of scraper conveyor is getting bigger and bigger, and higher requirements are put forward for the spare parts of scraper. The traditional brake disc type tight chain device has been unable to meet the requirements of production, scraper conveyor hydraulic motor tight chain system has become the choice of more large scraper conveyor.



The hydraulic motor tight chain system has the following advantages:

(1) The braking mode is reasonable and reliable. In the large scraper conveyor, the excessive torque can not be braking through the brake disc, and the hydraulic motor tight chain system internal braking function braking, the way is more reasonable, more reliable.

(2) Low fastening speed is conducive to control. The hydraulic motor tightens the chain, the motor speed is 100 RPM, after the reducer, the drive sprocket speed is lower, the chain speed is lower, more conducive to control.

(3) Simple operation, more conducive to control. Compared with the brake disc chain tightening device, the scraper conveyor hydraulic motor chain tightening system only needs to pull the operation handle or press the operation button, and the hydraulic system can complete the chain tightening.

(4) High safety factor. Hydraulic motor chain fastener has the advantage of hydraulic system, compared with the brake disc chain fastener of mechanical brake, overload unloading and transmission torque is more stable, high safety.

Scraper conveyer hydraulic motor tight chain system progress day by day, together with the coal mine fully mechanized working face automation degree more and more high, will become the future coal machine configuration mainstream. Henan Shuanzhi production of various types of hydraulic chain, brake disc chain, about more scraper accessories, you are welcome to telephone consultation.