Threaded flanges are designed to use threads to connect flanges to piping. Threaded flanges are used to connect pipes together in a safe, leak-free manner. They are often used in industrial pipelines where the flow of fluids or gases needs to be carefully controlled. Threaded flanges are designed to screw onto the end of a pipe, creating a tight seal that prevents leaks and ensures that the pipe operates at maximum efficiency. In addition to being used to connect pipes together, threaded flanges can also be used to connect other piping components such as valves, pumps and fittings. This makes them a versatile component that can be used in a variety of different piping configurations. Threaded flanges are typically made from materials such as carbon steel, stainless steel or alloy steel. The material used will depend on the specific requirements of the pipeline and its operating environment. The main advantage of threaded flanges is that they do not require welding to connect to the pipe. The ability to form joints without welding is a considerable advantage and is critical in certain locations and industries such as gas stations, hexane plants, flammable liquid stores, and other explosive areas (Ex zones). If welding is not required, the potential source of ignition has been removed. Another advantage is that threaded flange fittings are faster and easier to assemble and disassemble than welded flange fittings. Threaded flanges are not suitable for pipes with thin wall thicknesses, as it is more difficult to cut threads on such pipes. In some cases, sealing welds can be used to improve the integrity of the flange and reduce the potential for leakage. Adding a seal weld increases the integrity of the flange, but it also makes the joint more difficult to assemble and disassemble (because the weld makes it a permanent joint).
S355NL A105 Customized Large Flange Normalizing + Machined As Per Drawings
For heat exchangers, construction work and the oil industry
Type: Plate flange ,Lap Joint Flange ,Threaded flange,Socket Welding Flange, Blind Flange, Slip on Flange . Technics: Forged,Cast. Size: 1/2 80 (DN15-DN2000) Materia: Carbon steel: Q235A, Q235B,Q345BC22.8, ASTM A105, SS400 Alloy steel: ASTM A694,F42,F46, F52,F56, F60, F65, A350 LF2 , Stainless steel: 310/F304/304L/F316/F316L, F321, F347. Pressure: 150 lbs - 2500lbs PN6-PN250 0.6Mpa-32Mpa 5k-30k Standred: ANSI B16.5/ANSI B16.47/API 605 MSS SP44,AWWA C207-2007/ANSI B16.48 DIN2503/2502/2576/2573/860296/86030/2565-2569/2527/2630-2638 UNI6091/6092/6093/6094/6095/6096/6097/6098/6099 JIS B2220/B2203/B2238/G3451 GOST 1836/1821/1820 BS4504 EN1092 SABS1123 Application Fields: Chemical Industry /Petroleum Industry /Power Industry/Metallurgical Industry Building Industry /Ship-building Industry Certification: ISO,CE Packing: plywood cases, pallets or according to the customers' requirements
37 DEG FLARE FLANGE is a new range of flared flange products offering a low-cost alternative to tube fittings which previously required welding. No welding process required, it saves subsequent acid pickling, flaw detection and other procedures, and greatly shortens pipe cleaning time, makes construction easier and reduces labor costs; It is applicable to 16 140mm hydraulic pipelines, with a maximum working pressure up to 420bar; Products meet SAE J518/ISO6162, ISO6164 standards; No leakage has ever been found after being repeatedly used by the customers in many industries such as maritime engineering, maritime works, metallurgy, etc.
ISO 6164 square flange They meet all requirements of ISO 6164, we could offer VKA, VKAG, VKK, VKKG, VKW, VKKG, VKW, VKV, and details you could see as attached PDF. The pressure from 160bar to 400bar.
What is a blind flange A blind flange is a solid disc that is used to block a pipe or form a stop. Similar to a regular flange, a blind flange has mounting holes at the perimeter and gasket sealing rings machined into the mating surface. the blind flange has the face thickness of a flange, matching face type and a similar bolting pattern. Blind flanges are typically used to enclose the end of a pipe. They are also used for similar valve and pressure vessel openings. Because they are usually located at the end of a system, these flanges are usually among the highest stress flange types. tapped blind flange is only suitable for low-pressure systems where there is no thermal cycling that could cause thread loosening. Threaded pipe flanges are equipped with a tapered female thread into which the pipe can be screwed. tapped blind flange can be used in areas where thermal processing (welding, burning and grinding) is not desired. Flange Materials. Carbon Steel - ASTM/ASME SA-105, A-350 LF-2, LF-3, A694, SA-516-70 Stainless Steel - A-182 - F-304, 304L, 316, 316L, 309, 310, 317L, 321, 347, Alloy 20 In specifications of past decades, including B16.1 and other industry standard cast steel requirements, blind flanges typically contain a slight groove in the center portion of the convex face. This recess allows the pipe end to fit into the connection flange and allows a seal to be formed between this connection flange and the blind. Larger OD blind flanges have opted for a concave recess through the body of the shutter to create a disc-shaped head structure at the top of the flange. Because older cast iron specifications are relatively obsolete, these styles are not used to make most blind flanges. Instead, choose a modern blind flange with or without a hub. Fusion Fittings offers threaded pipe flanges in A105N, A105, SS316, SS304, and A20, high-yield nickel alloys
Roll forming your own TDC flanges with 16 forming stations on transverse duct ends during the manufacturing process has never been easier. The TDC flange, per Duct Construction Standard specifications, is formed on the machine started from decoiler, feeder, roll forming machine, cutting machine and stacking device automatically. The frame adopts full steel welding structure with enough hardness and rigidity. It also has been heated processed and highly frequently vibrated. Adopting floor boring-milling machine for guaranteeing the precision
Rollforming your own TDF flanges with 16 forming stations on transverse duct ends during the manufacturing process has never been easier. The TDF flange, per Duct Construction Standard specifications, is formed on the machine's right-hand, TDF Clip is formed on another side. The frame adopts full steel welding structure with enough hardness and rigidity. It also has been heated processed and highly frequently vibrated. Adopting floor boring-milling machine for guaranteeing the precision
Material Alloy steel (ASTM A234 WP12/WP11/WP22/WP5/WP9/WP91) Stainless steel (ASTM A403 WP304/WP304L/WP316/WP316L) Carbon steel (ASTM A234WPS, A234WPC, A420 WPL6), St45.8 A105 A106 STG42) Standard ASME B16.5 MSS SP44 Gost JIS etc Type WN FLANGE, SO FALNGE, LAP JOINT FALNGE, THREADED FLANGE, SOCKET FLANGE , BLIND FLANGE Pressure class 150 class 300 class 600 class 900 class 1500 PN6 PN16 PN25 PN40 PN100...... Size 1/2-80 inch (DN15-DN2000) Surface treatment Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc, Hot dipped Galvanized. Inspection Factory in-house self check or Third Party inspection Packing Wooden case, pallet or as customers requirement Applications Petroleum,chemical,power,gas,metallurgy, shipbuilding, construction, etc Heat Treatment Normalizing, Annealing, Quenching+Tempering Payment L/C T/T
Double Color DIP 5mm Round with Flange Features �? Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free .The product itself will remain within RoHS compliant version. Technical Data Sheet This product is generally used as indicator and luminary for electronic equipment such as household appliance, communication equipment, and dashboard Visible DIP, 5mm Round with Flange, 5mm Flat with Flange For Sale Applications TV set Monitor Telephone Computer Y.LIN Is a professional supplier of full color RGB DIP, 10mm round with edge and 8mm round with edge, etc. Please tell us what you required and ask any questions on any of our products.
Turbo blade with flange It is used for brick, block, concrete, granite, marble, masonry stone etc. The turbo rim segment makes it ideal for fast, aggressive, clean cuts and chip free. Use dry or wet. Item number DiameterSegment height (mm)Segment width (mm)Arbor(mm) Tgp1054''/105mm8-101.6-2.020/22.23 Tgp1154.5''/115mm8-101.6-2.020/22.23 Tgp1255''/125mm8-101.6-2.020/22.23 Tgp1506''/150mm8-102.0-3.020/22.23 Tgp1807''/180mm8-102.0-3.020/22.23/25.4 Tgp2008''/200mm8-102.0-3.020/22.23/25.4 Tgp2309''/230mm8-1 02.0-3.020/22.23/25.4 Tgp25010''/250mm8-102.0-3.020/22.23/25.4 -
Extruded and Flat blade street name sign bracket for U-channel posts. Blade sits at 90-degrees to post flange.
Quick information, brand name:dyft, place of origin:china, size :from 1/2, pressure :sch5s-sch160, material :carbon steel and some spe, standards :asme/ansi, din, jis, using :petroleum, chemical, power, description, concrete pump pipe flange data, , , specification, 1)size: from 1/2" to 48", dn15 - dn1200, 2)pressure: sch5s-sch160, 3) material: carbon, steel and some special materials., 4)standards:asme/ansi, din, jis
Class 75,150,300,400,600,900 series flange
Liquid Forging/Squeeze Casting + T6 Flange Material A356.2 Properties No pores,Elongation 8%, Hardness 80HBS, Tensile strength 300 Mpa, Yield strength 260 MPa Application:Nuclear reactor
Product Description Double stud adapters (DSA) are commonly used to connect flanges with different nominal sizes, pressure ratings and configurations. Yulin Double Studded Adaptor is also called adaptor flange, which is designed as per API 6A and API Spec Q1. It is the flange to connect different size flange. Features It can be used to connect flanges with any combination of sizes and pressure ratings Custom DSA's are available to transition between API, ASME, MSS or other styles of flanges Supplied with standard or customer-specific thicknesses Normally provided with tap-end studs and nuts Available for general service and sour service in compliance with any temperature rating and material requirements specified in API Specification 6A Available with Stainless Steel 316L or Inconel 625 corrosion-resistant ring grooves
The structure of the flange nut is that there is a wide flange at one end, which is equivalent to an integrated washer. This structure can distribute the pressure of the nut to the fixed parts, thus reducing the possibility of damage to the parts, and it is not easy to loosen because the fastening surface is not uniform. Specific price and the size of the material used product specifications and dimensions of the relevant, specific please find us to consult!
Slip-on, blind, weld-neck, threaded & socket weld, lap-joint, orifice flanges and spectacle blank DIN, ASTM, BS, ISO 9001
