Material of rope: high-strength polypropylene (nylon)
Material of rung: epoxy resin
Diameter of rope: 18mm-20mm
Diameter of rung: 23mm
Length of rung: 33cm
Span: 36-37cm
Length of ladder: 5m, 10m, 15m, 20m, etc
Static load ¡¨¹ 450kg
20m rope ladder weights about 15kg.
15m rope ladder weights about 11kg.
10m rope ladder weights about 8kg.
Item No: QH-500E
length: 185mm
Diameter: 127mm
Discharge time(s):22
Tempreature range:-40~ +108 Extinguishing time:40s
Spout
temperature:200
Dischager time:<30s
Minimum starting current:
250mA/5mS
Maximum safety current:150mA/5min
Fire suppression
time:60S
Use life:10years
Fire suppression type :A,B,C
Material:304
stainless steel ,nontixc ,oncorrosivity, no electrical conductivity, no damage
to atmospheric ozone layer, it is good green envirenmently product.
Fire extinguishers
Abc/bc powder fire ext.
Stainless steel fire ext.
Co2 fire ext.
Trolley/wheel fire ext.
Automatic/hang fire ext.
Valves of ext.
Gauges of ext.
Others of ext.
Fire hose
Coupling, joint
Nozzles /water separator
Fire hydrant valves
Fire hose reel
Fire fighting cabinet
Fire blanket
Sprinkler
Fire alarm
1.Dimension: 1kg, 2kg, 3kg, 4kg, 5kg, 6kg, 8kg, 9kg, 12kg.
2.The quality of chemical powder is very good: main chemical is ammonium dihydrogen phosphate (NH4 H2 PO4), the purity is 40%..
3. Applied scope is very extensive: it can be multi-applied for fire fighting, contains:
(1) Class A of fire fighting (occurred by wood, fiber, cotton, paper and Plastic, rubber, flammability solid).
(2) Class B of fire fighting (occurred by flammability liquid, oil, benzene).
(3) Class C of fire fighting (occurred by electric apparatus).
4. Specialized design: the cylinder and appendix are all made of good quality, almost doesn't puncture.
1. Dimension: Foam: 2L,6L,9L.
2. All our products are manufactured and tested under the standard of ISO9001.
3. Many years¡¯ experience of manufacturing and exporting.
4. Products are of good materials and quality,can meet customers any requirment.
Out-diameter:152mm
Volume:7.5L
Cylinder Length:575mm
Cylinder Weight:5.5Kg
Extinguisher weight:11.5Kg
Filling Weight:5Kg
Temperature Range:-30¡æ¡«+60¡æ
Max W.P:150Bar
Test Pressure:215Bar
Fire Class:89B.
Code hm01-39
Model oden3
Capacity 3 kg
Cylinder dia 140mm/125mm
Cylinder volume 4.00l/3.60l
Discharge time 12s
Full weight 5.60kg
Fire rating abc40% 13a/70b/c
Working pressure 14bar at 20c
Operating temp. -30c+60c
1 heat-insulation suit it is constructed by an aluminum foil compound flame-resisting material; the raise of inner temperature of the suit is not higher than 25 degree after it is shined 30 seconds by a 10kw/m heat radiator. 1 set it consists of jacket, pants, foot cover, glove and ccs certificate 2 self-contained open-circuit compressed air breathing the air cylinder operation pressure is 30 mpa 1 set a ccs certificate and a quality certificate 3 flame-resisting life-saving line 40m 1 set a ccs certificate and a quality certificate 4 explosion-proof lamp the minimum light period of 3 hours. 1 set a ccs certificate and a quality certificate 5 axe high-voltage insulation 1 set 6 rigid helmet it can effectively protect against impact and stabbing. 1 set 7 boots of rubber slip-proof, stab-proof, and acid and alkali-resistant 1 pair 8 safety belt 1 set.
The rhzk series self-cbntained open circuit compressed air bresthing apparatus are used widely for fire-fighting, chemical industry, shipping, laboratory, mine, petroleum, warehose, factory and metallurgy.It can provide effetely respiratory protecting from toxic gases for fire-fighter, life-saver, rescue and operator who working in thick smoke, steam, and oxygen deficiency hazardous atmosphere. Product inspection standard:requirements of the international code for fire safety systems and ga124-2004.Ec type examination certificate no.54 775 - 08 lux. Type working pressure(mpa) volume (l) tolerance of storing (l) working time (min) warning pressure (mpa) weight (kg) dimension (mm) rhzk 5/30 30 5 1500 40-50 4-6 ++n12 755*460*290 rhzk 6/30 30 6 1800 50-60 4-6 ++n14 755*460*290 rhzk 6.8/30 30 6.8 2040 50-60 4.
Gfm8-2 powder filler is a new product developed and designed by our factory in combination with the characteristic of actual filling with reference to the advantages of its counterparts at home and abroad. Powder is rapidly absorbed into the cylinder to be filled by vacuum jet current. It is equipped with t3806 weight display of high precision and mp-t printer. The filling is automatic and quantitative. The residual dust on the filter is cleared by use of the negative pressure produced by vacuum. As it integrates electronics, electrical device and machinery into one entity, labor intensity is lowered and work environment improved. It is characterized by small volume, light weight, lower energy consumption, easy movement, simple operation and longer service life. So it is specially suitable for powder filling of fire extinguisher and also ideal for other powder filling sector.
Main technical parameters
Volume: length *width *height (1130mm*520mm*1350mm)
Weight: 200kg
Voltage: ac 380v/220v 50hz
Power: 0.55kw
Filling precision: 1kg<+0.015
Filling speed: 6-12kg/min
The nonwoven filter media is made up of layers with different fibre fabric and having the high filtration efficiency, The fibre fabric gradually trend to thin and dense from Layer of gas entrance to the Layer of gas exit. The filter function was completed by filter effect of different fibre layer and fibre surface. it has the excellent air permeability and good strength after special process. The water resistance and dust storage is 3-5 times thanfilter paper .It widely use in automotive filter and other air filter.
Special Characteristic:
1).Initial efficiency í¦97.5% ; Final efficiency í¦99.8%
2).Excellent air permeability and enough micromesh with good dust-saving ability.
3).Easy taking shape and eximious strength capability
Chuck gauge; 10cm
Standard export packing
519 Fire Extinguishers Products Suppliers
Short on time? Let Fire Extinguishers Products sellers contact you.
