The 56F832X/812X, a member of the 56800E core-based family of digital signal controllers (DSCs), combines the processing power of a DSP and the functionality of a microcontroller. Inside a compact 48 or 64-pin LQFP, the device features: up to 60 MIPS performance (at 60 MHz) along with 32 KB of on-chip Flash memory and a comprehensive set of peripherals. It extends the capabilities of the 56F8322/8122 by adding additional analog-to-digital converter (ADC) inputs and timer input/output pins, among other enhancements.
Features
DSP and MCU functionality in a unified,C-efficient architecture with up to 32 MIPS at 32 MHz core frequency
64 KB (32K x 16) program Flash
8 KB (4K x 16) unified data/program RAM
Integrated Peripherials:
Controller area network (CAN)
One 6-channel pulse width modulation (PWM) module
Three programmable interval timers (PITs)
Up to 53 GPIO lines
Two up to 8-channel 12-bit analog-to-digital converters (ADCs)
Two 12-bit digital-to-analog converters (DACs)
This product is included in NXP’s product longevity program, with assured supply for a minimum of 10 years after launch
47294 Electrical Household Other Goods Components Suppliers
Short on time? Let Electrical Household Other Goods Components sellers contact you.
Features
DSP and MCU functionality in a unified, C-efficient architecture with up to 32 MIPS at 32 MHz core
32 KB of Flash memory
4 KB of RAM
Integrated peripherials:
One 6-channel PWM module
Two 12-bit up to 4-channels ADC
Two internal 12-bit DAC
Up to three PIT
QSCI
QSPI
I2C
Up to 35 GPIO
This product is included in NXP’s product longevity program, with assured supply for a minimum of 10 years after launch
The NXP MC56F800x family of digital signal controllers (DSCs) offer the functionality of a microcontroller with a flexible set of peripherals. The entry-level MC56F8006 and MCF56F8002 DSCs provide the most cost-effective solutions for mathematically intensive, power-sensitive, real-time control applications.
Features
DSP and MCU functionality in a unified, C-efficient architecture with up to 32 MIPS at 32 MHz core frequency
Up to 16 KB of Flash memory
Up to 4 KB of RAM
Integrated peripherals:
Up to 6-channel PWM module
Two up to 4-channel 12-bit ADCs
One serial communication interface (SCI) with LIN slave functionality
One serial peripheral interface (SPI)
One inter-integrated circuit (I2C) port
Up to 26 GPIOs
This product is included in Our product longevity program, with assured supply for a minimum of 10 years after launch
MPPT solar charge controller with timer and battery type selection
Key Features
1)MPPT with conversion efficiency up to 99% under charging mode.
2)12V/24V/48V system auto recognize.
3)Controller with Intelligent design and free lifelong online upgrade service.
4)LCD and LED show parameters and system information,like PV input voltage,battery voltage.
5)With intelligent design,the device can be upgraded online lifelong.
6)Nominal maximum solar/PV input is DC 150V .
7)Three Stages Charge mode: fast charge, constant charge, floating charge.
8) With high efficient MPPT operation scheme and adopting TI28035 chip.
9) Support kinds of batteries:Gel,Sealed lead acid,vented,NiCd,etc.
10)Extensible LAN remote control.
11)With CE, ROHS, FCC, PSE certifications.
12)7 languages.
13)2 years warranty
Feature:
Unique, unalterable and permanent animal identification system
Ergonomic, ;;No Return Click Listen for the Click It means the chip is properly implanted
Locks the injector, keeping the microchip from being sucked out during syringe removal
Easy, painless implantation
ISO-compliant microchips can be read internationally
Ideal for people who travel with their pets
Link pet health, breed and pedigree information through an online registry
Technical Specifications:
RFID microchip tag with syringe
Model
RBC
Syringe Size
143 : 47mm
Package Size
200 : 70mm
Packaging Material
Medical-grade, Breathable Paper
Operating frequency
125KHz/134.2KHz/13.56MHZ
Agreement support
ISO11784/5
Disinfection method
Ethylene Oxide,
Valid used period
above ten years
Color of Injector
White Syringe, non-removable syringe needle
Package Information
Sterilization Date, Effective Duration, 15-digit Serial Number (bar code)
Injector Weight
8.5g
CHIP
Chip Type
EM,SIC
Chip Size
2.12*12/1.4*8/1.25*7mm
Packaging Materials
Interior: Without lead and poison; exterior: Biochemical Glass
Application Areas
Cat, dog, experiment rat, pet mink, Gold Arowana, trout, horse, rabbit, etc.
Raybaca pioneered ISO standards for companion animal ID more than eight years ago. We continue to work with animal professionals and pet health organizations globally, to improve the lives of pets and give them the best possible chance of being reunited with their families, if they are ever lost.
We have a thorough understanding of the various issues associated with animal ID in all regions of the world and how these issues are affected by climate, culture, legislation, economic development, etc. Our products for companion animal ID include glass- and polymer-encapsulated RFID microchips and a variety of microchip scanners built to meet the varied and unusual needs of animal professionals from veterinarians in the clinic to animal control officers involved in cruelty investigations and seizures.
Scanning pets for microchips RBC_Scanning
Hold the scanner close to, or touching the animal
Scan slowly and repeatedly over the entire body to ensure whether or not a microchip is present
Wave the scanner back and forth lightly while scanning because microchips can be in various orientations within the animal
Scan first in a horizontal, then a vertical ¡¡ãS¡¡À pattern down the animal¡¡¥s body, as shown in the diagram
Consider scanning each animal more than once to ensure any present microchip can be localized by the scanner
Effective scanning isn¡¡¥t easy! Take your time, be patient!
Scanning live animals to verify whether or not they have a microchip can be difficult; animals move, hop, flap, step, jump, wiggle and wag! Even when they are being held or restrained, they are not trully still. Sometimes, just the expansion of their chests when they breathe can make it difficult. Take you time. Be thorough. Scan each animal at least twice to be safe.
We are proud to provide you with the best quality in animal identification systems. As the producer of the qualifed ear tags for all livestock species we provide lifetime guaranty for all Raybaca Tags.
Products are bovine ear tags, ovine ear tags, HDX electronic ear tags, FDX electronic ear tags, applicators and collets, laser marking and ear tag pens.
The Raybaca Ear Tags are made of flexible, long durable material and are the best solution for a safe identification, printed with logos, numbers, letters and bar codes by our computerized lasers sytems. Tamperproff tag system combines any female or male piece to form a single unit of great strenght. our new system will be protected against forcible opening. Our ear tags' quality have benn approved
and accepted by the officials in many countries for identification. Raybaca also offers you the best product in our industry with the most reasonable prices and punctual shipment.Raybaca has supplied ear tags for offcial purposes for years and the production is certifed according to ISO 9001:2000 quality management system. Our products are approved bey the Standards Institution.
Raybaca offers a complete range of electronic tags for livestock identification. We offer tags in a variety of shapes and sizes that are suitable for most any animal ¡§C cattle, sheep, goats, pigs, camelids etc.
Raybaca electronic ear tags are approved by ICAR, and meet ISO standards 11784/5 for animal identification. Each has an embedded, passive, electronic microchip that holds a unique identifier matched to the individual animal that cannot be manipulated.
Our tags have been designed to guarantee the highest possible retention rates and are easy to apply with our matching ear tag applicator.
Raybaca livestock identification systems help farmers and ranchers monitor and manage their herds all over the world ¡§C everyday.
Model
RBC-ET01
Tag Standard
ISO11784/5, FDX-B,FDX-A.HDX
Chip Type
Hi Tags, EM tags,SIC
Tag Height
20mm
Tag Frequency
134.2KHz,125KHz
Tag Diameter
29mm
Tag Color
yellow, pink and more
Tag Material
thermoplastic polyurethane
Bearable Tension
350 Newton
Usage
reusable
Operating Temperature
-20 ;C-55 ;C
Flyin Optronics offers a full range of Thermal/Athermal AWG products, including 50GHz, 100GHz and 200GHz Thermal/Athermal AWG. Here we present the generic specification for the 40-channel 100GHz Flat Top Thermal AWG (40 channel TAWG) MUX/DEMUX component supplied for use in DWDM system.
Flyin optronics' micro-optical wdm utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path.
Features
L wide operating wavelength range
L low insertion loss
L ultra flat wide passband
L high channel isolation
L high stability and reliability
L epoxy-free on optical path
Applications
L testing instruments
L ftth tri-play system
Flyin Optronics' MMWDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path.
Features
l Wide Operating Wavelength Range
l Low inertion loss
l Ultra Flat Wide Passband
l High Channel Isolation
l High stability and reliability
l Epoxy-free on Optical Path
Applications
l System Monitoring
l WDM Network
l Transmitters and Fiber lasers
l Fiber Optical amplifier
l Fiberoptic Instruments
Athermal AWG(AAWG) have equivalent performance to standard Thermal AWG(TAWG) but require no electrical power for stabilization. They can be used as direct replacements for Thin Film Filters(Filter type DWDM module) for cases where no power is available, also suitable for outdoor applications over -30 to +70 degree in access networks. Flyin Athermal AWG(AAWG) provide excellent optical performance, high reliability, ease of fiber handling and power saving solution in a compact package. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. We can just offer rackmount package for 50G AWG products.
standard package
47294 Electrical Household Other Goods Components Suppliers
Short on time? Let Electrical Household Other Goods Components sellers contact you.
