Operating principle it uses vertical vibrating motor as the source of vibration, with eccentric hammer on both sides of motor, making material do level, upright and incline movement, then the material passes these through surface of the screen after overall screening. Adjusting the phasic angle on both sides of the motor can change the movement track of the surface screen, which helps screen different materiel in different situation successfully. According to the model.
Electric motor 1, Good cooling effect 2, High start torque 3, Low start current 4, Low noise and vibration 5, Construction is compact 6, Temperature rise is low 7, Long hours VPI treatment 8, Stator coil is wrapped by 3 layers insulation structure 9, The end of stator coil applied the reshape fixing device to defend the coil deformation. 10, The voltage can be designed to 380,440,415,660,380/660.1140v,3kv,6kv,10kv, 11, Power is ranged from 0.75-10000KW, 12, Frame size is ranged from 80-1000mm 13, The optimal gap match is processed between of the stator and rotor. Wooden cases.
1, Good cooling effect 2, High start torque 3, Low start current 4, Low noise and vibration 5, Constrution is compact 6, Temperature rise is low 7, Long hours VPI treat ment 8, Stator coil is wrapped by 3 insulation layers 9, The end of stator coil applied the reshape fixing device 10, The voltage can be designed to 380,660,380/660.1140v,3kv,6kv,10kv, 11, Power is ranged from 0.25-10000KW, 12, Frame size is ranged from 80-1000 13, The optimal gap match between of the stator and rotor. Wooden cases.
* 100% Explosion-proof * Reversible / step less speed control * Lightweight * Low air consumption. * High torque output * Easy maintenance * Flange / foot / hub / metric / imperial standard / custom mounting. * Easy maintenance.
We successfully developed the production and quality control system for micro dc gear motors, and had several patents with years of efforts. The products can meet wide application requirements; have big torque, good performance and reliable quality. Diameter 16mm
we successfully developed the production and quality control system for micro DC gear motors, and had several patents with years of efforts. The products can meet wide application requirements; have big torque, good performance and reliable quality. diameter 20mm
DC gear motor Diameter 37mm
Sea water pump.
Hydraulic motor
TONSON Pneumatic double diaphragm pump is designed for volatile and hazardous chemicals to be explosion-proof, absolutely safe, convenient, saving you time and money. It can be installed without power supply and fastness. The material includes aluminum alloy and stainless steel.
CQB-F Series Fluoroplastic magnet pump adopts the permanent magnet into centrifugal pump. The pump has the advantages such as fully sealed and no leakage and anticorrosion etc. CQB-F Series Fluoroplastic magnet pump is made of PVF2. The material has the good anticorrosion and high mechanism intensity and no aging and no toxin distribution etc. The pump uses the stationary seal to substitute the rotary seal. The flow passage parts are in full seal to insure no leakage. The pump has the compact structure and good appearance and low noise and small volume and steady operation etc. The pump is widely used to transport acid and alkali and oil etc rare liquids and toxin and volatile liquids in chemical industry and pharmacy and electroplate and food and photo etc and water circulation system and filter system. It is especially for flammable and explosive and leaky liquids. Plywood case
MP Series minitype magnet pump is fully sealed without mechanical seal. The magnetism material in shaft and impeller attract each other for coincidence. Torsion of motor is driven by active magnet and passive magnet to let impeller work. Ceramic bearing has very good wearable and anticorrosion performance. The pump is widely used to transport acid and alkali and oil and rare liquids and toxin and volatile liquids in chemical industry, pharmacy,petroleum, electroplate,food, photo etc and water circulation system and filter system. The pump without explosion proof motor is especially for flammable and explosive and leaky liquids. Plywood case
The wet parts of this pump are made of full stainless steel material to perform outstanding corrosion resistance to organicacid,organic compound,alkali,neutral solution and a great many of gases. double helix carbon graphite bearing and hard alloy bearing are provided with good abrasion-resisting property to ensure the service life of product.It is an optimal pump for handling corrosive mediums without leakage. plywood case
CQ Series magnet pump is the new centrifugal pump used with magnetic coupling. The material of magnet pump has the stainless steel and reinforced polypropylene and engineering plastic etc. The pump has the advantages of reasonable design and entire seal and no leak and anticorrosion characteristic. The rotary seal replaces the stationary seal to insure no leak because the parts which contact with liquids are entirely sealed. Magnet pump is made of engineering plastic with anticorrosion and high strength and ceramic and stainless steel to insure good anticorrosion performance. Magnet pump has single structure and good appearance and small volume and low noise and reliable operation. The pump is widely used to transport the acid and alkali and oil and toxin and volatile liquids in chemical industry, pharmacy, petroleum, electroplate and food, etc. It is very suitable for leaky and flammable and explosive liquids. Plywood case
Zcq series self priming type magnet pump is the magnet pump with 4meter self priming height but it need not install foot valve and pour guide water. Rotary ring replaces stationary ring so that parts which contact with liquids are entirely sealed and no leak. Pump body and parts which contacts with liquids are stainless steel and ceramic and teflon etc material to insure the good anticorrosion performance Plywood case
Y, y2 three phase induction motor The structure of completeclosed, self-cooling fan and squirrel cage typed is suitable for the usage under bad environment.
Water pump We're manufacturer specilizing in fan clutch/water pump in shanghai china, our products are mainly exported to germany, uk, usa, canada, etc. We have high quality products with most competitive factory prices. I'm sure we can be your better choice once you try our fan clutches. Samples are available before you place order. Application cars: Mbz, Bmw, Audi, Opel, Ford, Toyota, Nissan, Mazda, Isuzu, Mitsubishi, Suzuki,
Shotgun Caliber:18.4mm Overall length: 923/688mm Barrel length: 425mm Overall weight: 3.15kg Effective range: 50m Magazin capacity: 5rounds Chamber pressure: 3000rounds
Gate motor All kinds of the gate motor and barrier and its accessories Export standard
Switch, wall switch, electrical switch, light switch, switchgear, electronic switch.
