Find Verified Electric Power Suppliers, Manufacturers and Wholesalers

Rectifier Transformer
Rectifier Transformer (ZPS, ZBS, ZSS)
Product Introduction:
Rectifier transformer is for power transformer with rectifier device. Its role is to provide AC power for the rectifier. Then the rectifier will change AC power to DC power supply. Itâ??s mainly used in the metallurgy, chemical industry and some other industry. Itâ??s low-loss, low-noise, shock resistant, and short-circuit resistant. Rectifier transformer also has the advantages of strong ability of over-load, compact structure, small size, reliability of power supply. 
Product Features:
Stable electrical performance: combing the load feature and the status of fluctuation of electric grid and voltage, atmospheric over-voltage, according to the rectifier transformer load conditions, determine a reasonable and reliable insulation level and insulation model, to ensure the reliable and stable electric performance of the product. Environmentally safe coefficient of the productâ?§1.67.
High degree of dynamic stability: the winding has a high mechanical strength , with a strong ability of anti contingencies, to meet the bad environment of load. During the process of design and manufacture, it eliminates the dynamic unstable source caused by magnetic leakage or non-normal transportation. The product has high dynamic stability. The resistance is 30% higher than the power transformer with same capacity.
Good thermal stability: advanced product design. The heating part and temperature rise of the hottest dot are strictly controlled, with sufficient temperature margin. If necessary, additional axial oil duct can be added in the coil. Cooling way can be chosen according the load loss value of the coil, then to allocate the oil flow reasonably to reach the best cooling effect. Main temperature rising index is at least 5C lower than national standard. Copper wire is used as coil and down-lead, selecting low current density.
High ability of overload: the product comes with strong capacity of over-load and over-voltage. It can be operated safely in long-term under the condition of rated load. It can be operated safely in long-term under the condition of 100% full load ( environment temperature 40C);the terminal on the transformer connected with the motor can bear 1.5 times the rated current, which is 5S. Load character is fully considered during the product design and manufacturing. Temperature rising, insulation properties and choice if attachment are considered to meet the overload requirements.
Superior performance index: no-load current design. Manufacturing capacity is lower than that of normal transformers with same capacity that regulated by national standards.
Obvious energy-saving, low noise
Simplified structure, elegant appearance. The oil tank adopts the technology of anti-leakage to avoid the leakage, eliminating the fuel tank leakage.

Battery Brand: VCELL/OEM
Battery Type: Lithium Polymer Battery
Model: VP601230
Nominal Voltage: 3.7V
Nominal Capacity: 180mAh
Charge Cut-Off Voltage: 4.2V
Discharge Cut-Off Voltage: 2.75V
Max charge current: 1C
Max continuous discharge current: 1.5C
Peak discharge current: 5C(700 times
Lifetime: >5 Years
Wire/Connector: TBD
Application: GPS, scanner, wireless device, baby monitor, handheld scanner, smart watches, smart glasses, smart clothes, smart shoes, etc.

recharge lithium battery
Advantages:
1. Factory direct sell
2. Larger stock
3. High capacity
4. Long cycle life time
5. Long standby time
6. No memory effect
7. Excellent safety performance
8. Excellent storage performance and low self-discharge rate
9. Short circuit testing passed
10. Over discharge testing passed
11. Overcharge testing passed
12. Test Certification : UN38.3
13. PCB/PCM and battery pack available
14. Environment-friendly materials minimize the contamination, Pollution-free
15. Light weight, small size

Major Applications:
1. Health & Medical: electronic cigarettes etc.
2. Telecommunication: cellular phone, web phone etc.
3. Portable office devices: Laptops, PDA, portable electrograph etc.
4. Video devices: GPS, digital camera, camcorder, portable DVD etc.
5. Portable exchange devices: POS, Handy etc.
6. Outdoor sports products: camping light, mountain bike light, solor emergency light, self-defense flashlight
7. Instruments and meters: water meter, gas meter.
8. Traffic equipment: electronic vehicles, electric bike, electric car, e-scooter, electric motor
9. Home appliances products: electric mop, electric vacuum cleaner, electric children toys, electric shoes, electric blanket.
10. Toys: remote control cars etc.
11. Tools: cordless power tools, electric drill, mower etc.
12. Others: models

Our service:
1. We are the professional factory of lithium-ion battery development, production, sale and application.
2. Low MOQ, Best quality, Competitive price, Fast delivery, Best after-sales service.
3. 100% QC inspection before shipment for our batteries.
4. OEM and ODM are welcome.(can meet your special needs and logo)
5. Our supply is sufficient to guarantee the customers demand.

Lithium Battery
Advantages:
1. Factory direct sell
2. Larger stock
3. High capacity
4. Long cycle life time
5. Long standby time
6. No memory effect
7. Excellent safety performance
8. Excellent storage performance and low self-discharge rate
9. Short circuit testing passed
10. Over discharge testing passed
11. Overcharge testing passed
12. Test Certification : UN38.3
13. PCB/PCM and battery pack available
14. Environment-friendly materials minimize the contamination, Pollution-free
15. Light weight, small size

Major Applications:
1. Health & Medical: electronic cigarettes etc.
2. Telecommunication: cellular phone, web phone etc.
3. Portable office devices: Laptops, PDA, portable electrograph etc.
4. Video devices: GPS, digital camera, camcorder, portable DVD etc.
5. Portable exchange devices: POS, Handy etc.
6. Outdoor sports products: camping light, mountain bike light, solor emergency light, self-defense flashlight
7. Instruments and meters: water meter, gas meter.
8. Traffic equipment: electronic vehicles, electric bike, electric car, e-scooter, electric motor
9. Home appliances products: electric mop, electric vacuum cleaner, electric children toys, electric shoes, electric blanket.
10. Toys: remote control cars etc.
11. Tools: cordless power tools, electric drill, mower etc.
12. Others: models

Brake fluid flow meter

Porter:sales9@gnflowmeter.com
Site:www.microflowmeter.com
Skype:shcixi_ru


Brake fluid flow meter(mini oil water flow meter) principle is a liquid pushing one pair of oval gears; volume of each cavity is a fixed volume; gear speed leads, the sensor sends the sync pulse count, oval gear rotated by the magnetic seal coupling and reduction gear mechanism passed directly to the counter indicates the total flow through the meter. If the additional transmission means, the display together with electrical instrument can achieve remote only instantaneous flow or accumulated flow.

The brake fluid flow meter with 0.2% accuracy and low flow range.the high temperature is 200C,the max pressure is 1000Bar.the output is pulse and material is stainless steel and aluminum.
Model Flow range Connection
CX-M2-SS/AL 0.5~150 ml/min G1/8 female thread
CX-M3-SS/AL 1-300 ml/min G1/8 female thread
CX-M5-SS/AL 5-1000 ml/min G1/8 female thread
CX-M6-SS/AL 0.5-100 l/H G1/4 female thread
CX-M9-SS/AL 5-550 l/H G1/4 female thread
CX-M12-SS/AL 1~30 L/min G1/2 female thread
CX-M25-SS/AL 5-110 l/min G1 female thread
CX-M40-SS/AL 10-250L/min G1 1/2 female thread
CX-M50-SS/AL 10-500L/min G2 female thread


Select the JSN and select the brake fluid flow meter flow meter,we will provide the professional service for you.

Fuel oil flow meter

Porter:sales9@gnflowmeter.com
Site:www.microflowmeter.com
Skype:shcixi_ru


Fuel oil flow meter(mini oil water flow meter) principle is a liquid pushing one pair of oval gears; volume of each cavity is a fixed volume; gear speed leads, the sensor sends the sync pulse count, oval gear rotated by the magnetic seal coupling and reduction gear mechanism passed directly to the counter indicates the total flow through the meter. If the additional transmission means, the display of fuel oil flow meter together with electrical instrument can achieve remote only instantaneous flow or accumulated flow.

The fuel oil flow meter with 0.2% accuracy and low flow range.the high temperature is 200C,the max pressure is 1000Bar.the output is pulse and material is stainless steel and aluminum.
Model Flow range Connection
CX-M2-SS/AL 0.5~150 ml/min G1/8 female thread
CX-M3-SS/AL 1-300 ml/min G1/8 female thread
CX-M5-SS/AL 5-1000 ml/min G1/8 female thread
CX-M6-SS/AL 0.5-100 l/H G1/4 female thread
CX-M9-SS/AL 5-550 l/H G1/4 female thread
CX-M12-SS/AL 1~30 L/min G1/2 female thread
CX-M25-SS/AL 5-110 l/min G1 female thread
CX-M40-SS/AL 10-250L/min G1 1/2 female thread
CX-M50-SS/AL 10-500L/min G2 female thread

Feature
1) Compact and economical design suited for OEM
2) High accuracy and repeatability
3) No requirement for flow conditioning
4)Stainless steel rotors
5) Measures high and low viscosity liquids
6)Original Equipment Manufacturers

Select the JSN and select the fuel oil flow meter,we will provide the professional service for you.

Hydraulic oil flow meter

Porter:sales9@gnflowmeter.com
Site:www.microflowmeter.com
Skype:shcixi_ru

Hydraulic oil flow meter(mini oil water flow meter) principle is a liquid pushing one pair of oval gears; volume of each cavity is a fixed volume; gear speed leads, the sensor sends the sync pulse count, oval gear rotated by the magnetic seal coupling and reduction gear mechanism passed directly to the counter indicates the total flow through the meter. If the additional transmission means, the display together with electrical instrument can achieve remote only instantaneous flow or accumulated flow.

The hydraulic oil flow meter with 0.2% accuracy and low flow range.the high temperature is 200C,the max pressure is 1000Bar.the output is pulse and material is stainless steel and aluminum.
Model Flow range Connection
CX-M2-SS/AL 0.5~150 ml/min G1/8 female thread
CX-M3-SS/AL 1-300 ml/min G1/8 female thread
CX-M5-SS/AL 5-1000 ml/min G1/8 female thread
CX-M6-SS/AL 0.5-100 l/H G1/4 female thread
CX-M9-SS/AL 5-550 l/H G1/4 female thread
CX-M12-SS/AL 1~30 L/min G1/2 female thread
CX-M25-SS/AL 5-110 l/min G1 female thread
CX-M40-SS/AL 10-250L/min G1 1/2 female thread
CX-M50-SS/AL 10-500L/min G2 female thread


Select the JSN and select the hydraulic oil flow meter,we will provide the professional service for you.

Dry type transformers shall be installed in accordance with the manufacturer's requirements, and shall be equipped with temperature measuring devices, generally 630kVA and above transformers.
A,1000kVA and above oil-immersed transformer shall be equipped with an outdoor signal thermometer and can take distant signals.
Product features:
A, tank using corrugated sheet, it has the respiratory function to compensate for temperature change caused by the oil volume change, so the product without oil storage tank, obviously reduce the height of the transformer.

B, because the corrugated film replaces the storage tank, the transformer oil is isolated from the outside, thus effectively preventing the entry of oxygen and water and the decrease of insulation performance.

C, according to the above five performance, to ensure the oil-immersed transformer within the normal operation of the don't need an oil change, greatly reduces the maintenance cost of transformer, and prolong the service life of the transformer.
D. In addition to the small capacity of copper wire, copper foil is usually used in the cylinder structure.
The high voltage winding adopts multi-layer cylindrical structure to balance the ampere-turns distribution of the winding, the leakage is small, the mechanical strength is high, and the anti-short circuit capability is strong.

E, iron core and winding each adopt the fastening measure, the height of the device, the low voltage lead wire and other fastening parts are equipped with self-locking anti-loose nuts, adopt the non-lifting structure, can withstand the shock of transportation.

F, coil and iron core adopt vacuum drying, the transformer oil adopts vacuum filter oil and oil filling process, which minimizes the moisture in the transformer.

Dry type transformers shall be installed in accordance with the manufacturer's requirements, and shall be equipped with temperature measuring devices, generally 630kVA and above transformers.
A,1000kVA and above oil-immersed transformer shall be equipped with an outdoor signal thermometer and can take distant signals.
Product features:
A, tank using corrugated sheet, it has the respiratory function to compensate for temperature change caused by the oil volume change, so the product without oil storage tank, obviously reduce the height of the transformer.

B, because the corrugated film replaces the storage tank, the transformer oil is isolated from the outside, thus effectively preventing the entry of oxygen and water and the decrease of insulation performance.

C, according to the above five performance, to ensure the oil-immersed transformer within the normal operation of the don't need an oil change, greatly reduces the maintenance cost of transformer, and prolong the service life of the transformer.
D. In addition to the small capacity of copper wire, copper foil is usually used in the cylinder structure.
The high voltage winding adopts multi-layer cylindrical structure to balance the ampere-turns distribution of the winding, the leakage is small, the mechanical strength is high, and the anti-short circuit capability is strong.

E, iron core and winding each adopt the fastening measure, the height of the device, the low voltage lead wire and other fastening parts are equipped with self-locking anti-loose nuts, adopt the non-lifting structure, can withstand the shock of transportation.

F, coil and iron core adopt vacuum drying, the transformer oil adopts vacuum filter oil and oil filling process, which minimizes the moisture in the transformer.

Execution standard
GB 1094.1-2 power transformer general rules, power transformer temperature rise
GB 1094.3 power transformer insulation level and insulation test
GB 1094.5 "power transformer capacity to withstand short circuit"
GB/T 6451 technical parameters and requirements of three-phase oil-immersed power transformer
GB/T 15164 load guide for oil-immersed power transformer
IEC76 power transformer
GB 2536 "transformer oil"
800KVA~31500KVA three-phase double-winding non-excitation voltage regulating power transformer:

product description
S13-M oil-immersed distribution transformers for the distribution network and industrial and mining enterprises in the power supply and distribution system in the important equipment Transformer in the industrial and mining enterprises in various regions of the country, agriculture and civil construction can also be used in petroleum, chemical industry, Multi-chemical substances.
Capacity in the 630 ~ 2000kvA range of low-voltage windings with cylindrical or spiral structure, high mechanical strength, ampere-turn distribution balance, the product of good short-circuit resistance.
S13-M oil-immersed transformer body to add the positioning structure, so that in the transport process does not produce displacement, and all fasteners with fastening nuts to ensure that products in the long run is not loose during the fasteners to meet the Not hanging core requirements.
S13-M oil-immersed transformer uses a corrugated oil tank, cancel the oil conservator, cover and box along the complete death or bolt fastening, extending the service life of transformer oil.
S13-M oil-immersed transformer surface to the oil, to embroidery, phosphate coating after spraying primer, topcoat, to meet the metallurgical, petrochemical and wet pollution areas of special use requirements.
Selection of components, using a sealed transformer tank, according to standard requirements to install a pressure relief valve, signal thermometer, gas relays, etc., to ensure the safe operation of the transformer. The series of products beautiful shape, small size, can reduce the installation area, is the ideal maintenance-free high-quality products.

Wind Power Generation Transformer
New Energy Dedicated Transformer
Product structure and features
General introduction
With the continuous growth of China's economy, the demand for electricity surged, energy has become the main contradiction. Because the traditional coal-fired and fuel power generation caused serious environmental pollution, so in order to be consistent with environmental protection requirements, wind power as a clean energy production that has been developed rapidly in our country , has become the main direction to solve the energy shortage. We company develop a series of wind power generation combination substation, which can change 690V voltage generated by wind power dynamotor to 35kVor 10kV voltage through rising and changing voltage, then send to gird system or users, finally finish the task of wind power generation. So, wind power generation combination substation is the best matching product of wind power generation system.
Structure and performance features
1, structure features
A, main body adopts the structure of common box transformer. Assemble high-voltage load switch, plug-in fuse, transformer body, off-circuit tap-switches and other H.V components in a sealed tank, transformer oil as insulating medium, its size is small and performance is excellent .

B, Overall combination type wind power substation is composed of H.V chamber, L.V. chamber, oil tank and radiator. Install chip radiator on the side of oil tank, the chip radiator is combined by guide pipe and cooling fin which can better adapt to high-power transformerâ??s cooling requirements. In order to prevent vandalism, to these cooling fins with weak mechanical, we will use steel shield that be punched cooling holes to enhance the protection. By substation, rise the voltage of power generated through wind dynamotor and merge into grids.

USA-type Transformer Substation
Box-Type Transformer Substation
ZG(F)S series prefabricated substation, also called USA-type transformer substation, is an new-mode complete set of power distribution equipments that absorbs foreign advanced technology and design concept. It is also can be used in our national power girds, including these distribution systems of industrial and mining enterprises, high-rise buildings, residential areas, stations, port terminals, especially suitable for alteration of urban and rural power grids, not only reduces engineering investment and occupying area, but also shortens the installation period.
Products features
Novel design, innovative structure, smaller volume
The high voltage overload switch, plug-in fuse and backup protection fuses are placed in transformer insulating oil tank, thus substations volume becomes smaller whose occupying area is only 1/3-1/5 of normal products.
Fully enclosed, fully insulating, safe and reliable
Transformer oil tank is fully enclosed structure without conservator. The high voltage inlet wire adopts connections of elbow-type cable plug and high voltage bushing, live parts sealed within the insulator, shape a fully insulating structure. Terminal surface is zero potential which can guarantee human safety.
Advanced protection principle, economic and reliable, easy to operate
Using full range protection mode of double fuse in high voltage side and supplemented by low voltage undervoltage protection to make operation reliable and easy. The body of transformer is used with S11,S13 series, its winding adopts Dyn11,with characteristics of neutral point not drifting, good lightning performance, low loss, low noise, etc.

LFP-Powerwall box, a Low-voltage lithium battery. With a scalable modular design, the
capacity range can be expanded from 5.12kWh to 51.2kWh.The modules are connected
by cables to support high-power work and are easy to install and maintain. Long life
technology ensures more than 6000 cycles with 90% DOD.
Nominal Voltage: 51.2V(16series)
Cell model/Configuration: 3.2V100Ah(REPT)/16S1P(51.2V)
Capacity(Ah): 100AH
Rated Energy(KWH): 5.12KWH
Max. Charge/Discharge Current(A): 100A /100A
Voltage Range(Vdc): 45-56.5V
Scalability: Up to 10 parallel
Communieation: TYPE-C/RS232-PC,RS485-Inverter,Canbus-Inverter
Cycle Life: 6000cycles@25 90% DOD 60%EOL
Design Life: 15 Years(25
Weight(Approx)(KG): Approx:48kg
Dimension (W/D/H)(mm): 580(+Hand)(620)*390*155(+Install the hanger)(195) mm
Installation Mode: Ip65
Safety(Pack): UN38.3,MSDS,CE-EMC
Safety(Cell): UN38.3,MSDS,IEC62619,CE,UL1973,UL2054
Protection BMS, Breaker

QianLi ToolPlus COPY POWER Battery Data Corrector and qianli battery flex cable are used to erase the non-genuine battery warning on Phone 11 - 12 Pro Max. Qianli Battery Data Programmer for Repair Reading and Writing Phone battery data, remove battery Error, restore battery Health information, erase non-genuine tips, ect. ,This device will solve the problem of Phone11-12 Pro Max battery encryption, and the efficiency and cycle cannot be corrected problem after replacing the battery cells.100% Fix Phone Non-Genuine Battery Warning of Important Battery Message.

Features:
1: No pop-ups,no jump Repairing,efficiency correction
2: Replace the battery core and reset the cycle
3: Available to correct Detail Status on Software of PC Side
4: Low power IC Chip, non effect for standby
5: Aisi flashing assistant or data in green

Relate Accessories:
Extenal Battery Flex Cable(Convenient to use, no require for Professional Skill)

PS: Suitable for Phone 11, Phone 11 Pro, Phone 11 Pro Max

If you replace the battery of Phone XS or above, whether it is a genuine battery or a third-party repair battery, you will see the message Unable to verify this Phone has a genuine Apple battery and Health information not available for this battery on the Phone ( As shown in the figure below), it means that the battery in the device cannot be verified as a genuine product, and the maximum capacity will not display the percentage.

KAISI 1505TD 15V 5A DC power supply with 5V 2A USB charging port for mobile phone repair. KAISI 1505TD intelligent DC regulated power supply voltage regulator.

Features:
1. 15V 5A voltage locking conversion.
2. 5V 2A current locking conversion.
3. One-key to boot, Apple one button PW boot function.
4. USB charging.
5. Charging current display function.
6. 4 digits LCD display.

Functions:
1. Apple one button PW boot function.
When 5V is locked, the USB voltage is adjusted to about 4.2V, and a one-button boot line is used(salef-configuration is required), press PW key to realize one-button boot.

2. 2A pointer display.
Can turn 2A pointer display(LCD display and pointer display at the same time), continuous power pointer watch band LED lamp lighting operation more convenient and clear.

3. Automatic protection reset function.
Protestion speed is fast, the load and short circuit can be timely protection, cut-off output, after troubleshooting, automatic return to normal work.

ANEVT(F) series dual-channel bidirectional DC power supply adopts high-frequency PWM rectification and bidirectional DCDC conversion, FPGA digital control, seamless switching between forward and reverse, automatic bidirectional operation, energy feedback to the grid at full power; advanced digital control, ultra-high control accuracy, fast response; two channels independently configured and not affect each other, which can be used in parallel to expand the DC output capacity and reduce investment by customer; abundant programming and testing functions, suitable for a variety of applications with different upper computer software.

Features:
Independent channel configuration: each channel is independently programmed, voltage, current and power parameters are set independently, and the operating parameters in programming mode are set independently. The channels are independent of each other and do not affect each other.
Parallel channels: The two channels do not affect each other, and can be used in parallel.
Grid feedback: both power supply and load characteristics, achieving the function of load for automatic energy feedback to the grid in addition to high-power DC power supply performance; energy saving, green and environment protection.
High-precision output: accuracy of output voltage: �±0.05% F.S.
Fast dynamic response: output voltage response time for 10%-90% sudden applied load and 90%-10% sudden shedding load: â?¤5ms; +90%~-90% forward/reverse switching time: â?¤10ms.
Mainstream high-frequency PWM rectification control, power factor â?¥0.99, THD and injected harmonic current meet the requirements of GB/T14549-93, high-quality energy feedback to the grid.
Advanced IGBT parallel technology, efficient and reliable.
CC, CV, CP modes.
Multi protection: input over-voltage/under-voltage, lack phase, output over voltage, IGBT overheat, IGBT over current, over temperature protection, short circuit current-limiting protection.
Built-in EMI filter to filter the interference signal caused by the high-frequency switching process.
Communication and remote control: standard CAN, RS232/RS485 port and remote control software of the upper computer.
Programmable slow-rise output.

Application:
Testing of electric vehicle motors and controllers
Testing of electric vehicle transmission system and powertrain system
Testing of special electric vehicle motors, controllers, electric vehicle transmission systems, and powertrain systems
Testing of fuel cell
Testing of new energy motor system
Testing of ship electric drive, electric drive system
Testing of charger and charging pile
Testing of battery pack charge/discharge
Testing of capacitor and super capacitor charge/discharge
Testing of energy storage system converter
Testing of UPS and EPS system
Testing of hybrid
Simulated battery to replace real battery-powered test applications
Power supply for high-power DC test

The ANFS series AC power supply adopts FPGA digital control, instantaneous waveform control and high-frequency pulse width modulation (SPWM) technologies. It has the advantages of fast response speed, high output accuracy, and superior waveform quality; it can withstand 3 times the rated current impact , a variety of output modes, which can achieve "one machine with multiple functions" to meet the needs of customers for flexible use; it adopts 8-inch color LCD with exquisite and high-grade appearance, and digital keys make the operation more convenient. Mainly used in applications such as home appliances, motors and production lines. It is one solution that meets the basic needs of traditional industries and a power supply alternative for equipment upgrades. It also provides laboratories, quality inspection units, scientific research institutes and other applications more flexible power configuration scheme.

Features:
1. Adopt FPGA digital technology, realize accuracy control and high quality sine wave output;
2.Advanced power output mode management: standard three-phase output, separated three-phase output (three-phase voltage and frequency adjusted independently), parallel single-phase output (three phase parallel, single-phase output) to achieve multi-function;
3.Operating in over current shock (up to 3 times of rated current)within 2s, start the impact load of 1/3 capacity of power supply directly;
4.Adjustable voltage and frequency during output status, frequency change without transit time;
5.Measurement: voltage, current, current peak, frequency, active power, apparent power, power factor, voltage peak factor;
6.Online monitoring: monitor IGBT temperature, transformer temperature, fan speed, input voltage and other parameters during output status;
7.Operating data recorders: keep the record of power supply status and alarm code automatically during alarming, save the maintenance time;
8.Fan speed will be adjustable automatically with the temperature of power supply to reduce the noise;
9.Lock key, user-friendly design, automatically locking without operation for 5 minutes to prevent from operation mistakes;
10. 8-inch large-screen color LCD display, digital key operation;
11.Standard RS232, optional RS485, GPIB, Ethernet, analog control and other remote communication/control.

Application:
1. Over shock capacity: impact load of 1/3 capacity of power supply directly without soft start.
2. Output mode management (standard three-phase output, separated three-phase output, parallel single-phase output)
3. Large-size color LCD, digital key input, knob operation
4. PC control software

In the field of industrial stainless steel welding, in order to obtain high quality weld quality. A argon arc welding (TIG) process will be used. When the process is automatically welded, as the welding speed increases, the arc will be dragged, and the faster the speed, the more obvious the penetration, which will affect the welding quality.

As shown in Figure 1, there are undercut problems on both sides and inside of the weld, and there is a "hump" problem inside and outside the weld. Especially for industrial welded pipes, sanitary pipes, when the undercut problem is not smooth, it will cause residual liquid and corrode the steel pipe. It also causes stress corrosion points. Therefore, in the field of industrial welded pipes, in order to obtain high-quality welds, it is necessary to reduce the welding speed and ensure the welding quality.

Part Number:VP603450
Voltage @ Capacity:3,7V @ 1100mAh
Configuration: 1S1P
Protection Circuit Overdischarge Trip Voltage 3.0V
Thermistor (NTC): optional
Dimension: 6.2x34.5x52mm Max with PCM
Charge Temperature 0°C to +45°C
Disharge Temperature -20°C to +60°C
Storage Temperature -20°C to +45°C