Model: ZH2KW Rated Power: 2000 Watts Maximum Power: ~ 2500 Watts Type: 3 Blade Upwind Rotor Diameter: 3.6 m (12 ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Over speed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 48 VDC Nominal . Wooden case.
Air cooled (PM) gasoline generating set 1.1 Gasoline Engine Powered: 5.0/6.0 kW using Yamaha engine with rare earth PM alternator 8.0/10.0/12.5/13.5/14.0/15.0kW using Kohler engine with rare earth PM alternator Special Features: +. Free excitation winding, magnetizing exciter, AVR, etc. Efficiency and power factor 20% higher than common excitation generator. +. It can lead inductive load of 80% self-capacity such as UPS, air conditioner, electric motor, etc. while common generator usually under 34%. +. High reliability, simple maintenance and operation +. High power density, high voltage stability for shock load. +. Voltage fluctuation ratio less than 0.5%, waveform distortion ratio less than 2%, applicable for high electricity quality requirement, particularly bank, telecom. Army etc. 300*200*100 50KG
Rated voltage(v) : 230/120 A.C frequency(hz) : 50/60 Max.A.C output(kw) : 1.2/1.5/1.8 Rated a.C output(kw) : 1/1.2/1.5 Power factor : cos&=1.0 Dc output(v/a) : 12/4.0 Engine Type : 147f Max. Output(kw/r/min) : 2.1/5000 Displaccement(cc) : 72 Fuel tank capacity(l) : 3.6 Continuous operating time(h) : 4.3 Min.Fuel consumption(g/kw.H) : 230 Noise level(db, 7m) : 58 Carton
Providing customized high quality services covering from system design of power plant, electromechanical equipment design and development, and manufacturing technique design, and manufacture, and testing, and inspection and after-sale service Depends on the dimension of the equipment
Engine brand prime power China weichai 20kw-150kw Cummins 40kw-1000kw Shangchai 50kw-300kw Volvo 75kw-450kw Steyr 64kw-200kw Daewoo 24kw-500kw Mwm 150kw-1500kw Jichai 500kw-1000kw Nantong 75kw-500kw Deutz 180kw -450kw
Typebrush, self-exciting, single-phase, 2poles Rate ac output(kva) 4 Max.Ac output(kva)4.5 Frequency(hz)50/60 Voltage(v)220/110 Voltage regulatoravr Power factor cosª)=1.0 Engineengine modelgn182 Typeair-cooled;4-storke;ohv25íptitl, level shaft, 1-cylinder Displacement(cm3)337 Ignitine system tci Fuelunleaded gasoline Fuel tank capactiy(l) 25 Fuel consumptionín313g/kva-hour Engine oil capacity(ú8) 1.1 Start moderecoil/electric Setcont.Working time(h) 12 Noise level(7m) 71db Packing dimension lxwxh(mm)692x535x580 Net weight(kg) 81 By box
The energy monitor is used to change the energy usage habits of households and save energy & money for family, and also do something for environment protection. Features: 1) with wireles tranmitting, receiver display the current power information, the money you are spending on power. 2) history power charge you had spent for monthly and annal. Up to 2 years information can be preserved. 3) check from a single location if appliances before leaving your home. Be safe every time you leave your home. 4) an audible alarm for excessive electricity usage 5) power supply: 2pcs aa for receiver; 2pcs aaa for transmitter (not include) 6) wireless transmitting range: up to 30m in room. 7) display currencies: ú, $ & euros 8) day/week/month usage view and daily/weekly/monthly average view 9) clock/date display 10)accessories: 1 receiver, 1 transmitter with, 1 dc adaptor, 1 clip on sensor, 1 instruction manual. Carton packing Szie:51*45*31cm 20pcs/ctn 0.6kg/piece
In dingol alternator factory, there are 5 engineers come from newage stamford factory in product engineering dept., quality dept., manufacturing dept., material dept. Dingol alternators own the same material, suppliers as wuxi stamford alternators. Dingol have more than 1000 units capacity per month and have achieved iso9001:2000 certificate and ce certificate for quality system in attachments for your reference. Wooden
CDY series impulse test systems can be used to generate impulse voltages simulating lightning strokes and switching surges. The stage energy is 2.5 kJ~1620kJ. Max. Charging voltage is 100~7200kV. Applications covered include testing according to IEC, ANSI/IEEE as well as other national standards. The basic system can be upgraded in various ways for special tests and for greater ease of operation. A number of additional circuits and components allow optimizing the impulse test system for tests on different kinds of high voltage test objects. The generator is due to its unique, modular, patented structure perfectly suited for transportation and easy on-site erection. Also the internal inductance is the lowest ever built. We can also provide the professional solutions and equipments for: withstanding voltage testing, c & tan-delta (power factor) testing, partial discharge (PD) testing and impulse voltage testing.
Three Phase Din -Rail KWh Meter (DTS353-M) Executive Standard: IEC62052-11 2003; IEC62053-21 2003 DIN-rail standard: "SO"43864. Function and characteristic: Single measurement accurately. Technical data: Rated current: 3*1.5(6)A 3*10(40)A 3*20(80)A 3*10(100)A Rated voltage: 3*220/380V, 3*230/400V Display mode; Counter 6+1 = 999999.9kWh Impulse contant: 800imp/kWh 1000imp/kWh Connetion mode: CT type; Direct type; Power: Less than 2W, 10VA Normal temperature: -10~45degree Ultra temperature: -20~55degree. Size: 122*100*65mm.
YTF Series Three 3 Phase AC Permanent Magnet Synchronous Wind-Turbine Generator YTF Series small permanent magnet synchronous wind-turbine generator is applied to the off grid wind-turbine generator system.Its output is symmetrical alternating current.The special materials protect the product free from corrosion or other weather damage,such as moisture,dry and sand etc . It is of high efficiency ,long serive life ,as well as eco-friendly character. The parameter is as follows.The OEM is acceped. type rated power (KW) rated revolution (r/min) Rated Voltage (V) Efficiency % MAX Start-up force (Níºípm) YTF300 0.3 400 28 70 0.3 YTF500 0.5 350 28 72 0.6 YTF1000 1.0 300 56 74 1.0 YTF2000 2.0 300 115 75 2.0 YTF3000 3.0 220 115 76 3.0 YTF5000 5.0 180 230 78 4.0 YTF7500 7.5 180 230 80 5.5 YTF10000 10 180 230 82 7.0.
(1) property: High density, high mechanical strength, high electric strength and low compression index. (2) quality standard: IEC 60641-3-1: 1992 /GB/T 19264.3 -2003 (3) size: 4400mmX2200mm, 6300mm x 3200 mm and customized size (4) thickness: 1.0 1.5 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 (5) material: 100% unbleached sulfate pulp imported from Canada. (6) detecting instruction: On-line highly sensitive metal detector, avoiding metal particle existence (7) application: Mainly used in oil-immersed transformer as insulation material, also used in reactor mutual inductanceware, electric device and etc.
Our core board is mainly used to make high strength chemical fiber tubes, yarn bobbins, industrial paper tubes for paper milling and plastic film ect. The specification of our core board is as following : (1)Substance:230g/m2 -600g/m2 (2)Rade:F200,F300,F400,F500,F600,F800,FB300,FB500 (3)Reel width:80mm-2200mm (4)Reel diameter:1100-1150mm Packing:wrapped with vinyl film for water proof 1MT/ROLL.
Model 5GF-LDE3. Engine model YS186F(E). Rated frequency 50/60Hz. Rated voltage 380/220V. Rated power 4.2/5.0Kw. Rated speed 3000/3600rpm. Noise leve 78-82dB. Power factor Cosª+=1/0.8. Starting method electric starter. Structure type silent. Packing size 970x570x765mm. Net /Gress weight 173/183Kg. Packing size 970x570x765mm Packed in Woodencases with Container Shipment.
Features Universal AC input / Full range AC input active surge current limiting Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage/Over temperature Built-in constant current limiting circuit Current sharing up to 2 units or 2000W Built-in remote ON-OFF control Built-in remote sense function SpecificationOver Load Protection 115~140% of rate load. Protection type : Constant current limiting, recovers automatically after fau Over voltage protection type : Shunt down o/p voltage, re-power on to recover. Over temperature TSW1: 95?C (Detect on the heatsink of PFC MOSFET) TSW2: 90?C (Detect the winding of output choke) Protection type : Shun down o/p voltage, recovers automatically after temperature goes down Remote control RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off sink current
The equipment takes agricultural and forest waste, such as rice husk, wood chips, coconut fiber dust, saw dust and crop stalks etc as the raw biomass fuel. These biomass fuels will be gasified into rough gas in the Gasifying Furnace, which is our patented product. Then after a series of cleaning and cooling treatment, the purification of the gas will be pure enough to meet the requirement of gas needed by the internal combustion engine to generate electric power. Available biomass fuels: Agriculture and forest residues, such as rice husk, crop stalks coconut fiber dust, palm shell, pruned fruit tree branch, wood chips, chips from timber processing factory and so on. Biomass gas from Fengyus fluidized bed can not only be sent to internal combustion engine for electric power generation but can also be used for household fuel to cooking and heating. It also can be send to boiler or hot-blast furnace to produce steam or hot air for drying Index: Model:LHC-100 LHC-300 Generator rated output power:100-300KW Production volume of biomass gas 2250Nm/3hr Gas temperature of the outlet after cleaning and cooling:under 45 degree celsius Consumption of biomass fuel:0.9-1.8ton/hr(for rice husk) Weight:2.0-3.8ton Main component and caloricity of biomass gas are different for difference of characteristic of biomass fuel gasification method, the caoricity of biomass of gasification is normally 1100-1500kcal/Nm3.(4.6-6.3MJ/Nm3) Biomass gas component: CO:17.2% H2:4.05% CH4:6.82% CmHn:1.24% H2S:---- CO2:15.1% O2:0.8% N2:54.7%.
Voltage set-upThe voltage set up when the remnant magnetism greater than 4v 25hz Input power supply Ac 160~260v 50/60hz Max outputDc 5a 95v(when the voltage reaches ac 240v) Frequency compensationBuilt-in low speed protective circuit. RegulationLess than 1%.
Input voltage 190-264v ac Input frequency 50-60 hz nominal Output voltage 73v dc Output current continuous 3.5 a dc. Regulation+/- 1%
Input voltage 70-140vac, (pmg, or auxiliary winding, single, three phases) Reaction is measured 90-480v ac Max output10a 125v dc Protects the functionbuilt-in low-speed , pass and encourage, lam, function Regulation+/-0.5%
As440 is a half wave phase controlled thyristor type avr and forms part of the excitation system for a brushless Generator. The design employs surface mount technology (smt) for high integration of features in a small footprint Avr.
