Gtake brand inverter are good alternative ABB'S ACS550 AND ACS800, the features below: 1.Adopt ti's dsp, and infineon's 4th generation igbt module. 2.Two expansion ports for pg cards for ABZ , UVW, resolver encoder. 3.Thick three-proofing lacquer coated for bad working condition. 4.Main and auxiliary settings and switch over. 5.V/f separated control mode, the output voltage and frequency can be set separately. It's helpful for the variable frequency power supply and torque motor application. 6.Parameter copying(upload and download) function 7.Two sets of motor parameters could be configured, easily run two motor alternately by the control panel. 8. Under vector control with pg, running zero-servo, main axis position control, feed-forward control, pulse serial position control and other position control. 9.Torque control upon the open-loop vector mode and the close-loop vector mode 10.Used for induction motor, servo motor, pmsm and industry particular motor 11.Pg feedback mode: ABZ encoder, uvw encoder, resolver 12.Servo control: main axis orientation control, simple feed forward control, pulse train position control 13.Load distribution function Gk600 technical specifications Rated voltage 3-phase ac380v/ac400v/ac415v/ac440v/ac460v/ac480v Frequency 50hz/60hz, fluctuation range5% Allowable range of voltage Continuous voltage fluctuation 10%, short fluctuation -15%~+10%, i.E. 323v~528v; Voltage out-of-balance rate Cardboard box, plywood carton
Leading electric motors manufacturer in china. Supply ac three-phase induction motors, wound rotor and synchronous motors, capacity from 220kw up to 30, 000kw. Packed in wooden case
Leading electric motors manufacturer in china. Supply ac three-phase induction motors, wound rotor and synchronous motors, capacity from 220kw up to 30, 000kw. Packed in wooden case
Voltage:220-240v Fequency:50/60hz Total high:172.5mm Diameter:150mm. Total high:172.5mm Diameter:150mm Watts:1400w
Landon gear motor series :landon gear motor is composed by one motor and one gear box. It has lower speed and bigger torque than common DC motors. Normally the speed of gear motor is lower than 1000rpm. These gear motors are widely used in home appliance, power tools.Automotive and automatic parts, such as money detector, binding machine, automatic tv rack, packing bank note machine, limelight, tissue machine, office equia, if you need the motor with the speed more than 1000rpm, please refer to our dc motor series. B, if you need a low speed(
Electric motor 1, Good cooling effect 2, High start torque 3, Low start current 4, Low noise and vibration 5, Construction is compact 6, Temperature rise is low 7, Long hours VPI treatment 8, Stator coil is wrapped by 3 layers insulation structure 9, The end of stator coil applied the reshape fixing device to defend the coil deformation. 10, The voltage can be designed to 380,440,415,660,380/660.1140v,3kv,6kv,10kv, 11, Power is ranged from 0.75-10000KW, 12, Frame size is ranged from 80-1000mm 13, The optimal gap match is processed between of the stator and rotor. Wooden cases.
1, Good cooling effect 2, High start torque 3, Low start current 4, Low noise and vibration 5, Constrution is compact 6, Temperature rise is low 7, Long hours VPI treat ment 8, Stator coil is wrapped by 3 insulation layers 9, The end of stator coil applied the reshape fixing device 10, The voltage can be designed to 380,660,380/660.1140v,3kv,6kv,10kv, 11, Power is ranged from 0.25-10000KW, 12, Frame size is ranged from 80-1000 13, The optimal gap match between of the stator and rotor. Wooden cases.
Detailed Product Description Rolling door motor 750kg Input/output Voltage: 220V/24V Rated Power: 240W Advancing Force: 750KG Maximum raising height: 9m Output Torque: 606N.m Output speed: 5.2r/min Chain No.:10A Diameter of roller:129mm Rolling door motor 750kg HL-DC24V Direct Current Rolling Door Motor is the new latest model developed by our company. This product is adapted many patents and techniques, easy installation, reliable operation. This product is suitable for the automatic rolling door, office, shops and hospitals. Functions: 1) Remote control function: up/stop, down/stop, stop/lock, unlock. 2) Manual control function: up/stop, down/stop. 3) Storage power: If the power supply is steady, the motor is driven by AC220V and transferred into DC24V, In the absence of power supply, the storage power can supply power and DC24V rolling door motor can be operated about 20 times. Features: 1) Good design, advanced structure, strong power. 2) Easy installation, Long service life. 3) Low noise, Small power wastage, little vibration. 4) Remote control. 5) Supply reserved power equipment, In the absence of power, the users can also operate the motors. 6) The battery is 4Ah/12. One set packaged in two cartons(mainframe and accessories cartons). About 450 sets for one container.
Typical Applications: Audio and visual equipments--volume drive Outline size:dia 24.4mm,motor body length 18.1mm Shaft diameter 1.5mm Nominal Voltage:1.5V Operating Voltage:1.2-1.8V No-load Speed:2040rpm No-load Current:15mA At Maximum Efficiency: --Speed 1622rpm --Current 58mA --Torque 0.36mN.m/ 3.7g.cm --Output 0.05W Stall Torque--1.75mN.m/ 17.9g.cm Stall Current--226mA The shaft length and the technical&mechanical parameters can be changed per customer's need. SDL's standard package.
Motor diameter: 20.4mm Motor height:15.4mm Motor body length: 25.1mm Rated Voltage:1.5V Rated current: 900mA Max Rated speed:4200 10%rpm Starting voltage : less than 1.0V SDL standard package.
Motor diameter:10mm Motor height:2.7mm Typical Applications: Mobile telephone Health protection equipments Rated voltage:DC 1.5V Rated current:120mA Max Rated speed:above 10000rpm Starting current:less than 35mA Starting voltage:less than 1.5V. SDL standard package.
Outline size: Dia 6mm,motor body length 10mm Counter weight: R3.0*1.5mm Rated voltage:1.3V Starting voltage: 0.5V Rated speed:10000,1000r/min Rated current: 50mA Stall current:120mA. SDL standard package.
Outline size: Dia 6mm,motor body length 12mm Counter weight: R2.5*4.0mm Rated voltage:1.3V Operating voltage:1.0-1.6V Starting voltage: 1.0V max Rated speed: 10000+/- 2000r/min Rated current: 80mA Stall current:140mA. SDL standard package.
Full automatic setting of the limits, various kinds of control options : RF remote control, switch.Intefrated emergency control ensures manual operation of the curtain in case of power failure.
* Adopts 12V DC motor,it can continuously work for 500 hours,save-electricity,high efficiency. * Adopts electronic orientation,no accumulated error,accurate and reliable. * No journey limit.positions and directions can be set by remote controller,very easy operation,no need to climb up windows to adjust. * Auto-memory while power off time,so there is no need to program position once again when power on. * Stop and change direction arbitrarily in mid-way,auto-stop while reach the ends. * In RF mode ,it will not be interrupted with each other while 6 million users program at the same time. * Remote control has double modes:IR&RF,can be changed arbitrarily;can control 5 groups of curtain motors separately or at the same time.No need for other connective wire or optional accessories;can be connected with home intelligent controlling system. * IR mode motor can be ordered:equip IR receiver,can realize IR control.
16mm DC Spur Gear Motor 1. Typical applications: pan/tiltcamera, auto shutter, welding machines, water meter ic card, grill, oven, cleaning machine, garbage disposers household appliances, slot machines, money detector, automatic actuator.Coffee machine , towel disposal, coin refund devices, peristaltic pump, lighting stage lamp , electronic lock, toy, coffer lock 2. Main voltage:1.5V,2.5V,3V,6V,9V,12V,24VDC 3. Motor Dia:15.5*26.9mm 4. Shaft Dia:3mm 5. Torque Range:50gf.cm to 3000gf.cm 6. Power:0.36~0.42W 7. Speed:Customized 8. Direction:CW,CCW 9. Gear box size:16mm*15.8~26.6mm(according to different reduction Ratio). 500 pcs per box.
1. Main voltage: 1.5V,2.5V,3V,6VDC 2.Typical applications: Automatic door-lock,projector,hairdressing equipment 3. Round Gearbox Dia:12mm 4. Torque: 300gf.cm~600gf.cm 5. Direction: CW,CCW 6. Our DC Planetary Gear Motor is with high torque,low speed,low noise ,good quality,long life,lower price ,fast delivery And the performance can be adjusted for customer. 500 pcs per box.
1. Typical applications: pan/tiltcameraauto shutterwelding machineswater meter ic cardgrillovencleaning machinegarbage disposers household appliancesslot machinesmoney detector automatic actuator.Coffee machine towel disposalcoin refund devicesperistaltic pump lighting stage lamp , electronic lock, toy, coffer lock. 2. Main voltage: 1.5V,2.5V,3V,6V,9V,12V,24VDC 3. Torque Range: 50gf.cm to 3000gf.cm 4. Power: 0.58-0.8W 5. Speed: Customized 6. Direction: CW, CCW. 500 pcs per box.
1. Typical applications: pan/tiltcamera, auto shutter, welding machines, water meter ic card, grill, oven, cleaning machine, garbage disposers household appliances, slot machines, money detector, automatic actuator.Coffee machine , towel disposal, coin refund devices, peristaltic pump, lighting stage lamp , electronic lock, toy, coffer lock 2. Rated Voltage: 1.5,2.5,3,6,9,12,24VDC 3. Gearbox Dia: 25mm 4. Torque Range: 640gf.cm to1390gf.cm 5. Speed: Customized 6. Direction: CW, CCW. 500 pcs per box.
Detailed production description: 1) Adopting the national uniform design, YS (AO2) series three-phase induction motors are in compliance with the standard of IEC. 2) According to dear guests' requirements, we can supply aluminum or iron frame. 3) It possess sophisticated features such as new construction, good appearance, outstanding performance, little consumption, slight vibration and reliable operation. 4) It's the power equipment for small-size machine tools, medical instrument, household electric appliance, food machine and so on.
