Da 2-95 Main line; 16-95sqmm Branch line: 4-35/50sqmm. mainline:insulated Cu or Al tap:insulated Cu or Al 1.Using corrosion-resistant shell, Anti-climate change, high-intensity ultraviolet insulation materials 2.Constant puncture fastening torque nut is installed more simple, safe, fast. 3.Extension puncture site and contact with senior waterproof cover functions (IP27), the water pressure of 6 KV 4.Extension Cover may as required under extreme left or right side. 5pcs/box 20box/carton.
As you are no doubt aware, the launch x431 system has a number of 16-pin obd ii-style plugs, obd-16c and can 2 are by far the most popular. Although your x431 will tell you which plug to use it will only do this after you have connected to the car potentially wasting time. The new launch super 16 connector avoids this by covering the functions of the smart obd, obd-16c, canbus ii plugs as well as the bmw-16 and toyota-16 plugs. Additionally the super 16 connector has a double wired can bus system allowing additional coverage for new opel, saab and gm vehicles, especailly for the srs system and some body control system. Also the citroen/peugeot converter required for use with the can 2 plug is no longer required with the super16 connector.
Originally designed in 1958 and known by a different name, it was not until 1968 that the SMA, after being incorporated into MIL-C-39012, became known as the SubMiniature A. Then and now, SMA's compact design, high durability and outstanding electronic performance have made it one of the most widely used connectors in RF and Microwave applications across the board. Normally utilized in frequency ranges from DC-18 GHz, there are also precision versions that can reach as high as 26.5 GHz. SMA is a 50 ohm impedance connector with a threaded interface for increased reliability and is suitable for a vast range of applications. It is also available in Reverse Polarity (RP) versions, where the male and female interface is switched.
Fiber optic attenuators are devices that reduce signal power in fiber optic links by inducing a fixed 5dB loss They are used to control the power level of optical signals at the outputs of light sources and electrical to optical (E/O) converters They are also used to test the linearity and dynamic range of photo sensors and photo detectors Features: Wide attenuation range (variable) Excellent environment stability Low insertion loss Precision ceramic ferrule Compact in size Simple and reliable structure Specifications: Operation wavelength: 1,310Nm and 1,550Nm Maximum optical input power: 500MW Return loss: UPC: 55 APC: 60 Maximum PDI: í_0.1dB Storage temperature: -40 to 85íµ Operating temperature: -30 to 75íµ Type: FC,LC,SC ect. optional Application: Telecommunication network Optical fiber CATV Measuring instrument Local area network Optical fiber sensor Optical fiber to household
Surge protective device, spd, distribution box, floor box, junction box, weather protected box
AC power connectors 2p flat ac plug to 2p round ac jack. Ac power connectors is nomal products that used in a wide scope. For other style please look at our homepage
Connector F connector 5000pcs:39x33x15cm
Connector
Audio connectors Changzhou lanjia electronic devices co., ltd, a professional manufacturer of consumer electronics, has engaged in the business for about two decades.Our products mainly include audio&video cables, coaxial cable series, tv antenna series and telecommunication components. Our audio connectors and adaptors are of high quality at very competitive prices.If you are interested in any of our products, please doní»t hesitate to contact us.We would like very much to establish business with you and will try our best to comply with your requirements. Our audio connectors and adaptors are of high quality at very competitive prices.
All kinds of tuner shell Tuner
Fiber type single mode multimode Insertion loss 161; 220;0.20db , 0.25db Return loss ¡Ý50db (pc) ¡Ý65db(apc) Repeatability ¡Ü0.1db Durability ¡Ü0.1db typical change, 500 matings Interchangeability: ¡Ü0.2db Operating temperature: -40 to +80 degrees celsius
Electric connector
Ipc series insulation piercing connectors Piercing connector, simple installation, need not strip the cable coat. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. Adopted special connecting table, apply to joint of cu(al) and cu(al) or cu and al. Small electric connecting resistance, impulse current can be up to 15ka. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kv. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (1.5-240mm2) Packaging by cartons
For connection of Al conductors according DIN 48201&ACSR conductors according to DIN 48204 with copper tap-off conductors according to DIN 48201. Material: Body: high strength, corrosion-resistant, aluminium 99.5 with hot forged bimetallic sheet . Bolts: steel 8.8, DIN 933, hot-dip galvanized . Nut:Steel 8,Din 934 hot-dip galv . pressed into lower part Conical Washers:Steel,Din6796 corrosion-protected.
For tap-off connection of aluminium alloy conductors according to DIN48201&ACSR conductors according to DIN48204 Meterial: Body:High strength,corrosion-resistant,aluminium99.5 Bolts:DIN 933 ,steel 8,8,hot-dip galvanized Pressure Pad:aluminium alloy Spring Washers:DIN127,steel,hot-dip galvanized Conical Washers[According to order]:DIN6796,corrosion-protected.
For tap-off connection of copper conductors Material: Body:High strength copper alloy [CuNi2Si] Bolts:High strengh copper alloy,F-60,DIN 933.Option to stainless steel .Nuts:Copper,DIN 934.Option to stanless steel Surface:Uncoated Conical Washers :Steel DIN6796,copper plated
Material: Body:Corrosion resistant high strength aluminium99.5 Boits:steel,8.8,DIN933 hot-dip galvanized Nuts:steel,8DIN 934hot-dip galvanized.
It is suitable for the sequence and transportation of all kinds of conductor in electric netting,made of copper.
Type: SD Standard: ISO 13918 Material: Mild steel Mechanical properties: Tensile strength >= 450N/mm2 Yield strength >= 350N/mm2 Elongation >= 15% Specification: Head diameter: 19~35mm Shank diameter: 10~22mm Head height: 7~10mm Other material and specifications available upon request.
Specification Length : 100mm Max.Bundle.Dia : 25mm Min tensile strenth : 18kg Color : natural(or white , standard color), uv black and other colors are available as requested . Packing : pet tube; blistercard value pack ;pvc value pack
