DQ-630 Type Four Terminal Wiring Clamp
I. Overview
DQ-630 type universal conductor resistance clamp is the auxiliary equipment for measuring the DC resistance of wire and cable conductors, which can be used together with QJ36, QJ57, SB2230, PC36C and other double bridge and digital bridges to measure conductor resistance. It meets the standard requirements given in GB/T3048 Test Method for Electrical Performance. The baseplate is made of aluminum alloy section, and is provided with independent clamping head on current end and voltage test end. The current-end clamping end may be used to adjust the distance with the test end (voltage clamping head) according to the sectional area of the conductor measured. In addition, its performance indicators and technical parameters comply with the requirements of relevant national standards.
II. Main technical parameters
Current-end shape: Right-angle jaw shape
Voltage-end shape: Right-angle knife shape
Contact width of clampï¼?45mm
Space between current and voltage ends: Adjustable range
Length of measurement wireï¼?1000mm
Maximum cross section of the sample ï¼?630 mm²
Horsin technology co,. ltd was founded in 2005, which pecializes in manufacture and export variety of RF connectors and RF cable assembly for more than 12 years. You could get almost all usual Connectors, Adapter, cable assemblies from us in good factory price. Our main product line contain:
SMA ,SMB , SMC , SMZ , SMP, MCX , MMCX , 4.3-10 M 4.1-9.5 , DIN7/16 , L29 , N type , TNC , BNC ,UHF ,MMBX , PSMP RF coaxial connector ,
RF Coaxial connectors / Board to Board Connector / Wire-to-board connector
RF cable assembly / coaxial connector cable / RF assembly
As the top manufacturer and supplier of RF coaxial connectors in China, we highly regard our products quality to ensure your 100% satisfaction. We believe our company can definitely provide more value to our customer.
Horsin technoloby co,. ltd provides a full range of RF coaxial connectors, from SMP, MMCX, MCX , SMA, SSMA, SMB, SSMB, SMC, SSMC, Mini DIN 4.3-10, Din 7/16, N etc . in the same time ,we are supply alternative IPEX. which supply to do standard products ODM and custom-made products OEM Service. Our main products include High Frequency cable assemblies, Low loss RF coaxial cable assemblies, low PIM jumper cable , RF coaxial connectors, RF coaxial adapters. These products are mainly used in data storage, antenna, networking, communications, automotive, medical,aerospace, military field.
Horsin was founded in 2005, specializes in manufacture and export variety of RF connectors and RF cable assembly for more than 12 years. You could get almost all usual Connectors, Adapter, cable assemblies from us in good factory price. Our main product line contain:
RF Coaxial connectors / Board to Board Connector / Wire-to-board connector
RF cable assembly / coaxial connector cable / RF assembly
As the top manufacturer and supplier of RF coaxial connectors in China, we highly regard our products quality to ensure your 100% satisfaction. We believe our company can definitely provide more value to our customer.
1 . 360°screening for full EMC shielding.
2 . Security of the push-pull self-latching system.
3 . Multiple key options to avoid cross mating of similar connectors.
4 . Keying system for connector alignment.
5 . Number of 1 Pins .
6 . Solder , Print contacts(straight or elbow).
7 . Coaxial 50 Ohm(Solder)
Multi core : 2-14 pin
Color : 6 color recognition
Contact Treatment: Plated gold
Apply : Medical infant Monitor
Type : Straight plug with cable collet
Gender : male & female
Color: Blue/black
Fabric Thickness: 0.4mm
Metal thickness:0.4mm
Temperature range: -20¡ã C- 80¡ã C
Width: 250, 300, 350, 400mm (available in various widths to meet customer's requirement. )
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
K Series
Main features:
1. Smart push-pull self-latching system;
2. Multicore types with 2 to 26 pins;
3. Solder or PCB contacts (straight and elbow);
4. High packing density for space saving;
5. Different kinds of keying options to avoid mismatching;
6. 360 degree screening for full EMC shielding;
7. Waterproof connecter (IP66 to 68);
8. Rugged housing for extreme working conditions;
9. Interchangeable with LEMO&ODU connector.
Parts of connector:
1) Shell made of copper alloy, stainless steel is used in special occasions, plated with Nickel or Chrome;
2) Pin and jack made of copper alloy, plated with gold;
3) Insulator molded with engineering plastic which is high-temperature endurable and good insulating;
4) Sleeve molded with soft plastic to protect cables
1376 Electric Connectors Suppliers
Short on time? Let Electric Connectors sellers contact you.
