Guangdong Futina Electrical Co.,ltd, the electrical wall mounted bathroom exhaust fan manufacturer more than 20 years, bathroom exhaust fan wall vent, high quality with profesional design, small and lightweight, futina barand, the first choise to fresh the air for the bathroom. Highlight Of bathroom exhaust wall vent High quality plastic, ultra-thin and lightweight. Efficiency and energy saving, super quiet. The motor adopts high quality silicon steel sheet and high strength pure copper enameled wire, automatic overtemperature protection. Countercurrent baffle design, easy to operate. Special for bathroom ventilation, greatly show health care. Futina switch, as an excellent wiring devices manufacturers, offers a wide range of face wash for you to choose from.
Battery Type: Lithium Ion Battery(NCM) Nominal Voltage: 60V Nominal Capacity: 40Ah Battery Brand: VCELL/OEM Model: VP-NCM-60-40 Charge Cut-Off Voltage: 67.2V Discharge Cut-Off Voltage: 44.0V Max Charge Current: 1.0C Maximum Continuous Discharge Current: 1.5C Peak Discharge Current: 3.0C Lifetime: over 700 Cycles Communication Function: SMBUS, RS232/485, CANBUS
Product Details: BRAND: USPECIAL Model: PK213005MT VDC: 21V CAPACITY: 3000mAh RATE: 5C POWER: 300W CELL: 10 Battery SIZE: 114*76*64mm BRAND: USPECIAL Model: PK213010MT VDC: 21V CAPACITY: 3000mAh RATE: 10C POWER: 600W CELL: 10 Battery SIZE: 114*76*64mm Our best portable power pack are designed and built to be used in conjunction with the appropriate power tools and interchangeable with the Makita best power packs.
Battery Type: Lithium Ion Battery(NCM) Nominal Voltage: 11.1V Nominal Capacity: 8000mAh Battery Brand: VCELL/OEM Model: 18650-3S4P Charge Cut-Off Voltage: 12.6V Discharge Cut-Off Voltage: 8.25V Max charge current: 1.0C Max continuous discharge current: 1.5C Peak discharge current: 3C(
2600mah battery for power tools, full capacity, high cycling, low internal resistance and ultra-low self-discharge to meet the requirements of your power products. Capacity: 2600 mAh Minimum Capacity: 2580 mAh Discharge Rate: 3C Nominal Voltage: 3.7V Internal Resistance: â?¤20m�© Cycle Life: 500 Charge Voltage: 4.2V士0.03V Charge Current: 0.5C (About 3 hours) 1C (About 2 hours) Standard Discharge Mode: 0.2C Constant current discharge to 2.75V Max. Continuous Discharge Current: 7800mA Operating Temperature Range: Recharge (0-45C) Discharge (-20-60) Long time Storage Temperature: -20~25C Initial Size: Diameter:18.15+0.20mm Height:65.0-0.50mm
Battery Brand: VCELL/OEM Battery Type: Lithium Polymer Battery Model: VP104050 Nominal Voltage: 3.7V Nominal Capacity: 2500mAh Charge Cut-Of Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Max Charge Current: 1.0C Standard Discharge Current: 0.2C Maximum Continuous Discharge Current: 1.5C Peak Discharge Current: 5.0C(700 times Wire/Connector: TBD
Battery Brand: VCELL/OEM Battery Type: Lithium Polymer Battery Model: VP802844 Nominal Voltage: 3.7V Nominal Capacity: 1000mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Max Charge Current: 1.0C Maximum Continuous Discharge Current: 1.5C Peak Discharge Current: 5.0C( 700 times Wire/Connector: TBD Application: Baby monitors, VR glasses, radio controlled devices, personal electronics, samrt wearable devices, Bluetooth headsets/speakers, GPS tracker, E-book, laptops, mobile phones, digital cameras, digital camcorders, etc.
Product Details: BRAND: USPECIAL Model: PK212005MT VDC: 21V CAPACITY: 2000mAh RATE: 5C POWER: 200W CELL: 5 Battery SIZE: 115*72*42mm BRAND: USPECIAL Model: PK212010MT VDC: 21V CAPACITY: 2000mAh RATE: 10C POWER: 400W CELL: 5 Battery SIZE: 115*72*42mm Our external battery pack are designed and built to be used in conjunction with the appropriate power tools and interchangeable with the Makita best portable battery pack.
The development and application of high-power water-cooled charging cables not only improves the charging efficiency but also enhances the safety of the charging process, which is of great significance in promoting the development of the electric vehicle industry. As technology continues to advance, future charging cables are likely to feature more innovations in materials, design and functionality to meet the needs of the growing electric vehicle market. 1. High power power transmission: suitable for fast charging needs, capable of carrying high current and enhancing charging efficiency.� 2. water cooling system: adopts high thermal conductivity cooling medium circulating in the pipeline to effectively reduce the temperature and provide higher power transmission capacity. 3. Prevent overheating: quickly take away the heat generated by the cable and keep it at a low temperature to improve the safety and stability of the charging process. 4. Advanced materials and design: make the cable size lighter and more flexible, reduce weight and volume, improve portability and installation flexibility. 5. shielding technology: effectively reduce external electromagnetic interference, improve the stability and reliability of the charging system. Role in electric vehicle charging system: - Meet the demand for fast charging and provide an efficient, safe and stable charging experience. - High power transmission capability, significant cooling effect, lightweight and flexible size and strong anti-interference capability make it an ideal choice. OMG' is committed to creating advanced, safe and high-quality water-cooled charging cables, its products have obtained the European standard, American standard, in line with RoHS 2.0 & REACH environmental protection standards, with good resistance to acid and alkali, oil and water, dragging and dragging, abrasion resistance, anti-cracking performance; excellent flexibility and sealing performance. With the technological progress and application promotion, the importance of high-power water-cooled charging cable in the field of electric vehicle fast charging will be increasing.
Electric vehicle charging safety is a multi-faceted issue involving the charging environment, equipment condition, cable performance and system maintenance. The following are key points to ensure charging safety: 1. Charging environment: -Choose a clean and dry place for charging, away from water sources and flammable materials. -Charging cables should be resistant to water, oil, corrosion, acid and alkali. 2.Equipment Inspection: -Check the charger and cable for damage before use, such as broken or loose cable. -Make sure the cable has good mechanical properties, abrasion and drag resistance, and adapt to complex environments. -The device will heat up when charging, avoid covering objects to cause overheating, and do not touch the battery or plug or unplug the device. -Use liquid-cooled charging technology to reduce heat accumulation, achieve effective heat dissipation, and support high-current fast charging. 3.System Maintenance: -Check and maintain the charging system regularly to ensure its good condition. As a new energy charging technology provider, OMG' focuses on the following aspects: Technical Innovation: -Experienced technical team specialising in mechanical and special performance testing of cables. -We provide customised and standardised solutions based on our R&D philosophy of "Green Innovation". Product Certification: -Charging cables meet international and regional standards, including EN, IEC, UL, JCS, PSE, and CQC & DEKRA certifications. Product Performance: -High flexibility, bending radius less than 5D. -Acid and alkali resistance, abrasion and tensile resistance, crush resistance, crack resistance, UV resistance. -Resistant to bending more than 50,000 times, with good flame retardant properties. -All materials comply with RoHS 2.0 & REACH environmental standards. With the development of new energy charging technology, OMG' is committed to improving the safety and reliability of the charging process, promoting electric vehicles as the mainstream transport in the future, and contributing to the construction of a clean and low-carbon society.
Battery Type: Lithium Ion Battery(NCM) Nominal Voltage: 72V Nominal Capacity: 20Ah Battery Brand: VCELL/OEM Model: VP-NCM-70-20 Charge Cut-Off Voltage: 84V Discharge Cut-Off Voltage: 55V Max Charge Current: 1.0C Maximum Continuous Discharge Current: 1.5C Peak Discharge Current: 3.0C( 700 Cycles Communication Function: SMBUS, RS232/485, CANBUS Application: AGV, ebike, e-scooter, electric motorcycle, golf cart, robot, electric tricycle, etc.
Battery Specification: 2600mah battery for power tools, full capacity, high cycling, low internal resistance and ultra-low self-discharge to meet the requirements of your power products. Capacity: 2600 mAh Minimum Capacity: 2550 mAh Discharge Rate: 1C Nominal Voltage: 3.7V Internal Resistance: 50m Cycle Life: 300 Charge Voltage: 4.2V 0.03V Charge Current: 0.5C (About 3 hours) 1C (About 2 hours) Standard Discharge Mode: 0.2C Constant current discharge to 2.75V Max. Continuous Discharge Current: 2600mA Operating Temperature Range: Recharge (0-45°C) Discharge (-20-60°) Long time Storage Temperature: -20~25°C Initial Size: Diameter:18.15+0.20mm Height:65.0士0.50mm
The charging safety of electric vehicles has always been concerned by the market, the following is to focus on charging safety from several aspects of the charging process: First, ensure the charging environment is safe. Charge your electric vehicle in a clean, dry place, as far away as possible from any water source or flammable materials. Electric vehicle charging cables need to have good water and oil resistance, corrosion resistance, acid and alkali resistance and other special properties. Next, check whether the charging equipment is damaged. Check the charger and charging cable for signs of damage, such as broken or loose cables, before each use. Electric vehicle cables have good mechanical properties, wear-resistant, drag-resistant, etc., adapting to a variety of complex charging environments.� And the devices get hot when charging, so don't cover them with anything to avoid overheating.Also don't touch the battery or plug and unplug the charging device directly. Liquid-cooled charging technology can be used to reduce the excessive buildup of charging heat and realize real-time effective heat dissipation, which can carry high-current rapid charging. Finally, charging systems need to be checked and maintained regularly to ensure they are in good condition. OMG' is committed to be the world's first-class new energy charging application technology provider, with experienced technical team, focusing on cable mechanical performance and special performance testing. We have always been adhering to the "green innovation" R & D concept, the specific needs of customers into practice, to provide customers with customized, standardized charging application technology solutions. Electric vehicle charging cables are an important part of new energy charging equipment, and OMG's electric vehicle charging cables meet the European standard EN, IEC,UL, JCS, PSE, CQC and DEKRA certificates. It has high flexibility, bending radius less than 5D; acid and alkali resistance, abrasion and tensile resistance, crush resistance, crack resistance, UV resistance; bending resistance of more than 50,000 times; good flame retardant properties; all materials used are in line with RoHS 2.0 & REACH environmental standards. With the continuous development and improvement of new energy charging technology, it can better guarantee the safety and reliability of the charging process, which will help promote electric vehicles will become the mainstream transportation in the future, and make an important contribution to the construction of a clean and low-carbon society.
10KWh rack-mounted lithium batteries are made of new A grade battery cell (such as EVE's brand, Gotion High-Tech, BYD etc). So we can guarantee the product quality.
From an engineering point of view, the principle of liquid-cooled charging mode is to utilize the heat absorption and conduction properties of liquid to conduct heat out of the battery through a cyclic manner, thus keeping the operating temperature of the battery within an appropriate range. This way can effectively improve the charging efficiency of the battery, avoiding problems such as reduced charging efficiency and shortened battery life caused by overheating. Â Liquid-cooled charging cable as a charging device in the important power transmission carrier, its working principle is mainly between the cable and the charging gun set up a special liquid circulation channel, the channel to join the use of liquid cooling liquid, through the power pump to promote the circulation of coolant, so that the charging process of the heat generated by bringing out. Â Liquid-cooled supercharging technology has a number of advantages. First, liquid-cooled supercharging allows for higher currents, resulting in faster charging speeds. The output current of a charging post is limited by the cable of the charging gun, and the heat generated by the cable is proportional to the square value of the current. Therefore, to reduce the heat generated by the cable to avoid overheating, it is necessary to increase the cross-sectional area of the wire, and liquid-cooled supercharging technology can effectively solve this problem. Â Overall, liquid-cooled charging cables are of great significance in the field of electric vehicle charging. Through the combination of technical principles and application practices, liquid-cooled charging cables not only improve charging efficiency, reduce equipment maintenance costs, but also enhance the user experience.As an excellent new energy charging application technology provider, OMG' has been deeply cultivating in the field of electric vehicle charging cables for many years, focusing on research and development of high-quality charging cables, and paying attention to the industry certification.OMG' electric vehicle charging cables satisfy the European standard EN, IEC certification, the American standard UL certification, the Japanese standard JCS, PSE certification, and CQC, DEKRA dual-certification. It has high flexibility, bending radius less than 5D; acid and alkali resistance, abrasion and tensile resistance, crush resistance, crack resistance, UV resistance; bending resistance more than 50,000 times; good flame retardant performance; all materials used comply with RoHS 2.0 & REACH environmental standards. In the future development, liquid-cooled charging cable is expected to become an important development direction of electric vehicle charging technology, providing more reliable and efficient charging solutions for the popularization and promotion of electric vehicles.
Electric vehicle charging experience has always been one of the focuses of attention for the majority of electric vehicle users. During the charging process, the design and quality of the electric vehicle charging cable directly affects the user's charging experience. A quality electric vehicle charging cable can not only improve charging efficiency, but also reduce the user's charging time, making the charging experience more convenient and comfortable. From a technical point of view, the design of electric vehicle charging cables needs to take into account factors such as charging power, charging speed and safety. A high-quality electric vehicle charging cable should have high-strength insulating materials to ensure that there will be no safety problems such as leakage or short circuit during the charging process. In addition, reasonable length and thickness are also important factors affecting charging efficiency. The quality of the EV charging cable is also crucial from a user experience perspective. An EV charging cable that is easily damaged or easily knotted will cause a lot of trouble to users, which not only affects charging efficiency, but also may cause safety hazards. Therefore, choosing an electric vehicle charging cable should emphasize quality and durability. To sum up, high quality electric vehicle charging cables are vital to enhance the charging experience. OMG', as an excellent international provider of new energy rushing belt application technology, continuously optimizes the design and quality of electric vehicle charging cables from the technical point of view and the user experience point of view. OMG' charging cables are certified by the European standard, the American standard, the Japanese standard and the new national standard. OMG's charging cables are certified by European standard, American standard, Japanese standard and new national standard, with high flexibility, bending radius less than 5D; excellent physical and mechanical properties, resistance to bending and abrasion, etc.; good flame-retardant performance; all the materials used are in line with RoHS 2.0 & REACH environmental protection standards, which provide users with a more convenient, safe and comfortable charging experience. OMG' insists on pursuing innovation and improvement to provide customers with customized electric vehicle charging cable solutions to meet specific usage requirements.
The development and application of high-power water-cooled charging cables not only improves the charging efficiency but also enhances the safety of the charging process, which is of great significance in promoting the development of the electric vehicle industry. As technology continues to advance, future charging cables are likely to feature more innovations in materials, design and functionality to meet the needs of the growing electric vehicle market. 1. High power power transmission: suitable for fast charging needs, capable of carrying high current and enhancing charging efficiency.� 2. water cooling system: adopts high thermal conductivity cooling medium circulating in the pipeline to effectively reduce the temperature and provide higher power transmission capacity. 3. Prevent overheating: quickly take away the heat generated by the cable and keep it at a low temperature to improve the safety and stability of the charging process. 4. Advanced materials and design: make the cable size lighter and more flexible, reduce weight and volume, improve portability and installation flexibility. 5. shielding technology: effectively reduce external electromagnetic interference, improve the stability and reliability of the charging system. Role in electric vehicle charging system: - Meet the demand for fast charging and provide an efficient, safe and stable charging experience. - High power transmission capability, significant cooling effect, lightweight and flexible size and strong anti-interference capability make it an ideal choice. OMG' is committed to creating advanced, safe and high-quality water-cooled charging cables, its products have obtained the European standard, American standard, in line with RoHS 2.0 & REACH environmental protection standards, with good resistance to acid and alkali, oil and water, dragging and dragging, abrasion resistance, anti-cracking performance; excellent flexibility and sealing performance. With the technological progress and application promotion, the importance of high-power water-cooled charging cable in the field of electric vehicle fast charging will be increasing.
Electric vehicle charging safety is a multi-faceted issue involving the charging environment, equipment condition, cable performance and system maintenance. The following are key points to ensure charging safety: 1. Charging environment: -Choose a clean and dry place for charging, away from water sources and flammable materials. -Charging cables should be resistant to water, oil, corrosion, acid and alkali. 2.Equipment Inspection: -Check the charger and cable for damage before use, such as broken or loose cable. -Make sure the cable has good mechanical properties, abrasion and drag resistance, and adapt to complex environments. -The device will heat up when charging, avoid covering objects to cause overheating, and do not touch the battery or plug or unplug the device. -Use liquid-cooled charging technology to reduce heat accumulation, achieve effective heat dissipation, and support high-current fast charging. 3.System Maintenance: -Check and maintain the charging system regularly to ensure its good condition. As a new energy charging technology provider, OMG' focuses on the following aspects: Technical Innovation: -Experienced technical team specialising in mechanical and special performance testing of cables. -We provide customised and standardised solutions based on our R&D philosophy of "Green Innovation". Product Certification: -Charging cables meet international and regional standards, including EN, IEC, UL, JCS, PSE, and CQC & DEKRA certifications. Product Performance: -High flexibility, bending radius less than 5D. -Acid and alkali resistance, abrasion and tensile resistance, crush resistance, crack resistance, UV resistance. -Resistant to bending more than 50,000 times, with good flame retardant properties. -All materials comply with RoHS 2.0 & REACH environmental standards. With the development of new energy charging technology, OMG' is committed to improving the safety and reliability of the charging process, promoting electric vehicles as the mainstream transport in the future, and contributing to the construction of a clean and low-carbon society.
Electric vehicles need fast and safe charging to meet users' needs. Firstly, from a practical point of view, fast charging can greatly shorten the waiting time of vehicle owners and enhance the experience of use. For example, on long-distance trips, if the charging time is too long, it will not only affect people's travel plans, but also may trigger users' range anxiety. Secondly, safe charging is the basic need of every car owner. After all, frequent charging accidents will greatly reduce people's confidence in EVs and negatively affect their market prospects. Currently, the market achieves high-efficiency charging of trams through liquid-cooled charging technology: 1. Heat dissipation principle: - Using the heat absorption and conduction characteristics of coolant, the heat generated during charging is exported through circulation. - It keeps the working temperature of the battery in a suitable range, improves the charging efficiency, and prevents overheating from decreasing the efficiency and shortening the service life. 2. Liquid cooling system composition: - Including power pump, liquid circulation channel and coolant. - The power pump drives the coolant circulation, and the liquid circulation channel is located between the cable and the charging gun. 3. Technical Advantages: - Supports higher current for fast charging. - Reduce the heat of the cable to avoid overheating, increasing the cross-sectional area of the wire is not a necessary condition. As an excellent new energy charging application technology provider, OMG' has ploughed deeply into the field of electric vehicle charging cables for many years, focusing on the research and development of high-quality charging cables, and paying attention to the industry certification.OMG' liquid-cooled charging cables have been certified by UL, IEC, TUV, and CQC, and make use of the liquid-cooling technology, which makes it possible for the cable to keep a low and constant temperature during the charging process by cooling down. Charging process to maintain a low constant temperature, to overcome the heat damage to the charging gun, charging cable, charging pile heat, so as to improve the DC charging current of a programme. It can fill up the car battery or quickly replenish the battery in a short time to improve the user experience. Liquid-cooled charging cable is an important development direction of electric vehicle charging technology, OMG' is committed to providing reliable and efficient charging solutions for the popularisation and promotion of electric vehicles.
Battery Type: Lithium Ion Battery(NCM) Nominal Voltage: 60V Nominal Capacity: 25Ah Battery Brand: VCELL/OEM Model: VP-NCM-60-25 Charge Cut-Off Voltage: 67.2V Discharge Cut-Off Voltage: 44.0V Max Charge Current: 1.0C Maximum Continuous Discharge Current: 1.5C Peak Discharge Current: 3.0C( 700 Cycles Communication Function: Support communication functions like SMBUS, RS232/485, CANBUS Application: AGV, e-bike, e-scooter, electric motorcycle, electric tricycle, golf cart, robot, intelligent instrument, etc.
