1. The brief introductions of 15 meters crawler rotary pile drilling rig with circular power rod With hydraulic crawler retractable chassis, self-lifting and falling foldable drill mast, Telescopic drill pipe, rotary pile drilling rig with circular power rod is a kind of construction machinery suitable for drilling in building foundation engineering. It is mainly suitable for the construction of sandy clay silty soil and other soil layers. It is widely used in the construction of cast-in-place piles continuous walls foundation reinforcement and so on. Compared with the ordinary rotary drilling rig,rotary pile drilling rig with circular power rod has many objective advantages, such as drilling the concrete ground, the hard sand soil layer, the rock layer and so on. It is suitable for large engineering construction, high speed rail and railway construction. The machine works with fast speed, high efficiency, good drilling quality, oil saving and durable. 2.The features of 15 meters crawler rotary pile drilling rig with circular power rod The folding mast structure is adopted. The structure is simple and exquisite, and its durability is good. The whole machine has good stability, cost saving and convenient maintenance. The upper guide structure ensures the perpendicularity of the drill pipe and the ground, so that the construction is more convenient, the construction efficiency is improved, and the safety is increased. The power head adopts the original patented structure, the design is more reasonable, the lubrication is reliable, the power is strong, the cost is economic, and it is not easy to damage, so it is easy to maintain. The main winch is equipped with imported hydraulic motor, which has a sensitive response and can be freely lowered when used. The lifting speed can reach up to 82m/min, which greatly improves the construction efficiency. The main winch is placed at the right front side of the operator, so that the operator can observe the working condition of the main winch at any time and avoid the phenomenon of disorder caused by other factors.
1.Brief introductions of ZDY-750 full hydraulic tunnel drilling rig ZDY-750 full hydraulic tunnel drilling rig mainly consists of pump station, power head, rack, column frame, operation platform and drilling tool. Rig pump station and power head are connected by high pressure pipes with different diameters. All joints are connected by quick connection, which is convenient for installation,withdrawal and transportation. The pump station is driven by an explosion-proof motor to drive the oil pump to convert the electric energy into the rotating oil road and the hydraulic energy (pressure oil) to advance the oil road. Then the pressure oil is transported to the hydraulic actuator through the valve group on the control table, so as to realize the various functions of the drill. 2.Applications of ZDY-750 full hydraulic tunnel drilling rig ZDY750 full hydraulic tunnel drilling rig for coal mine is mainly used for drilling holes, grouting holes, water injection holes, anti outburst and pressure relief holes, geological exploration holes and other engineering holes. Suitable for rock strength coefficient of F is less than or equal to 10, the various coal seam strata. Drilling rig can drill holes in the range of azimuth and dip angle specified in the basic parameter table. 3.Specifications of ZDY750 full hydraulic tunnel drilling rig Item Unit ZDY-750 Drilling depth m 150 Open hole diameter mm Ф65/Ф85/Ф115 End hole diameter mm Ф65/Ф75 Drilling pipe diameter mm Ф42/Ф50 Drilling angle º 0-90 Drilling azimuth º 0-360 Output torque n.m 750/300 Output rotating speed r/min 120/330 Working pressure of hydraulic system mpa 14 Thrust kn 50 Pulling force kn 30 Anchorage force kn 80*2 Advance speed m/min 0-1.5 Feeding stroke mm 850 Motor model YBK2-180M-4 Motor power kw 18.5 Motor voltage v 380/660 Tank capacity l 90 Working medium Thick 40�Hydraulic oil Main engine dimension mm 2107*440*615 Pump station dimension mm 1400*700*986 Weight kg 1400
1.Brief introductions of ZDY-1250 full hydraulic tunnel drilling rig ZDY-1250 hydraulic tunnel drilling rig is used for coal mine: Z stands for drilling rig; D stands for tunnel; Y stands for hydraulic driven, and 1250 is the maximum output torque of 1250n. m. 2.Applications of ZDY-1250 full hydraulic tunnel drilling rig ZDY1250 tunnel drilling rig is mainly used for drilling holes of gas pumping (row), grouting hole, water injection hole, anti process and pressure relief hole, geological exploration hole and other engineering drilling holes. Drilling rig can drill holes in the range of azimuth and dip angle specified in the basic parameter table. 3.Specifications of ZDY-1250 full hydraulic tunnel drilling rig Project Unit ZDY-1250 Maximum drilling depth m 200 Open hole diameter mm Ф87/Ф115 End hole diameter mm Ф65/Ф75 Drilling pipe diameter mm 50 Drilling angle ° -90-+90 Rated output rotating speed r/min 80/170 Rated output torque n.m 1250/600 Rated power kw 22 Rated voltage v 380/660 Rated current a 42.5/24.5 Feeding force kn 60 Pullout force kn 45 Anchorage force kn 4*45 Rated advance speed m/min 0-1.5 Feed stroke mm 850 Hardness range (protodyakonov scale of hardness) f�10 Noise db(a) �92 Main engine dimension (long*width*high) mm 2240*1000*1478 Total weight (without drill rod) kg 1820 Shandong Master Machinery Group Co.,Ltd. Sales Manager:Coco Yan Tel:0086-537-2335787 Mob: 0086-18865479508 Wechat:008618865479508 Whatsapp:008618865479508 QQ:2648769002 E-mail:sale05@huaxiamaster.com Website:www.huaxiamaster.com
1.Brief introductions of ZDY-1600S full hydraulic tunnel drilling rig ZDY1600S full hydraulic tunnel drilling rig is a full hydraulic power head mechanism, which is divided into three main parts, main engine, pump station and control table. It is easy to disassemble and convenient to transport. The drilling rig structure is arranged with great flexibility. Also, we provide mechanical unload drilling tools, chuck, clamp and oil cylinder. Revolving device and gripper can operate in linkage, Therefore, the drilling rig is highly automated, made the drilling rig efficient and easy to operate. The ZDY1600S full hydraulic tunnel drilling rig adopts double pump system. The rotation parameters and the input parameters are independently mediated, which improves the adaptability of the drilling machine to various drilling technology; it is convenient to save force by adjusting the inclination angle of the fuselage with the support oil cylinder; the rotary device adopts the through hole structure. And the length of the drill pipe is not limited to the process. The worker can operate from afar, so itâ??s good in flexibility and safety. 2. Specifications of ZDY-1600S full hydraulic tunnel drilling rig Project Unit Parameter Maximum drilling depth m 250/80 Open hole diameter mm Ф113/Ф128 End hole diameter mm Ф150/Ф200 Drilling pipe diameter mm Ф63.5/Ф73 Drilling angle ° 0-±90 Output torque n.m 900-1600 Rated advance speed m/s 0-0.2 The applicability of the strength coefficient of coal and rock fâ?¦10 Main engine dimension size mm 2300*950*1500 Total weight (excluding the drill rod) kg 1900 Main engine weight kg Motor power kw 30 Shandong Master Machinery Group Co.,Ltd. Sales Manager:Coco Yan Tel:0086-537-2335787 Mob: 0086-18865479508 Wechat:008618865479508 Whatsapp:008618865479508 QQ:2648769002 E-mail:sale05@huaxiamaster.com Website:www.huaxiamaster.com
1.Brief introductions of ZDY-3200S full hydraulic tunnel drilling rig The ZDY3200S full hydraulic tunnel drilling rig for coal mine is mainly used for drilling holes of large diameter gas (row), grouting and fire prevention holes, coal seam flooding holes, anti outburst and pressure relief holes, water penetration holes, geological exploration holes and other engineering drilling holes. It is suitable for all kinds of coal and rock drilling. But the rock strength coefficient of needs to be under 10. Appropriate drill bits and drill pipes can be used for coring, soft coal seam drilling and other engineering operations. 2. Features of ZDY-3200S full hydraulic tunnel drilling rig The ZDY3200S full hydraulic tunnel drilling rig is a combined structure of all hydraulic power head. It consists of four parts: the hydraulic pump station, the power head, the rack, the operation floor and the column support. The breakage performance is good. The components are light in weight. It is easy for underground driller to move and shift, and the drilling rig structure layout is flexible. The rig has unique hydraulic system and double pump. The rotary parameters of drilling rigs and the feeding parameters can be independently regulated, which improves the adaptability of drilling rig to various drilling processes. The power head gyrator adopts the structure of double motor and transmission spindle through hole, and the length of drill pipe is not restricted by the drilling machine, that is to choose the drill pipe with different length according to the construction conditions of the underground drilling field. The hydraulic chuck and the hydraulic gripper are used for unloading the drill pipe, which is simple, labor-saving, efficient and safe. The oil pipe connection is between the operation platform, the pump station and the main engine, so you can operate it intensively and the personnel can operate far away from the wellhead to protect personal safety. Four column support, lifting cylinder will adjust the fuselage (drilling inclination angle), which is convenient and labor-saving. With variable pump, it has infinite variable speeds regulation and great adaptability in different working conditions.
rod 1.The applications of 22 meters crawler rotary pile drilling rig with square power rod The crawler rotary pile drilling rig with square power rod is suitable for soil layer, clay layer, fill layer, silt layer, silt layer and some strata containing pebbles, gravel and strong weathered rock. It is widely used in building construction,, high speed rail contact network support, slope protection pile, city construction, civil building, new rural construction, power grid transformation, garden greening and many other projects. 2.The features of 22 meters crawler rotary pile drilling rig with square power rod High efficiency and energy saving hydraulic system, large torque full hydraulic power head, 360 degrees of free rotation, wide application, high construction efficiency, stable performance, environmental protection and energy saving and other advantages, deep pile driving, fast speed convenient displacement. compared with large rotary drilling rig,This drilling rig has the characteristic of low cost of purchase, low cost of transportation, quick income. These characteristic shows its economy and engineering adaptability. 3.The technical parameter of 22 meters crawler rotary pile drilling rig with square power rod The 22 meters crawler rotary pile drilling rig with square power rod adopts two kinds of drilling models, self weight pressure and cylinder pressure, which can achieve 22 meters depth of rotary drill pile, and can select drilling tools with different specifications. The maximum diameter of pile hole can reach 1500mm. Item Unit Parameters XWDF-22 crawler rotary pile drilling rig with square power rod Working mode / cylinder pressure wire rope Gravity pressure Open hole diameter mm 500-1500 Drilling depth m 22 10-26 Dimension m 8.7*2.3*3.1 Weight (excluding drilling tools in standard configuration) t 16 Maximum power head torque kn.m 26000 Power head rotating speed r/min 20-40 Rotation angle of turntable full gyration Maximum moving speed km/h 2.6 Maximum grade ability ° 25 Engine model / 6105 medium cold turbocharging in weifang Engine power kw 145 (In the continuous improvement of products, technical parameters are based on practical consultation.)
1.Brief introductions of KHYD75 electric rock drilling rig for coal mine KHYD75 is a electric rock drilling rig for coal mines. It is a tool for drilling rock burst holes. It is used in the operation of mine road way driving, road construction, water conservancy construction, metallurgical mining and stone square engineering, and can also drill water hole, water probe hole and gas hole in coal seam. ·electric rock drilling rig can be combined with drilling stand, and can be horizontally forward or inclined upward and downward. ·In order to prolong the service life of the drill bit and improve the working conditions of the operator, it can be used for mixing the drill hole water to discharge the powder or also using the spiral vane drill pipe to drill and dry powder discharge. ·In drilling operations, we only need to operate the handwheeland can advance and retreat automatically. 2.Specifications of KHYD75 electric rock drilling rig for coal mine Model Unit KHYD75 Rated output power of electric motor kw 3 Rated voltage of electric motor v 380/660 Rated frequency of electric motor hz 50 Rated current of electric motor a 6.8/3.9 Motor rotating speed r/min 1420 working mode continuity Drilling speed mm/min 320 Maximum axial thrust n 10000
1.Brief introductions of KHYD110 electric rock drilling rig ·The electric rock drilling rig can be fitted with drill stand, and can be drilled horizontally or upward in any direction. ·In order to prolong the service life of the drill bit and improve the working conditions of the operator, wet drilled water can be used to discharge the powder and screw blade drills can also be used for dry draining. ·In the operation of electric motor rock drilling rig, we only need to operate the handwheel, and the electric motor rock drilling rig can advance itself and return quickly. 2.Specifications of KHYD110 electric rock drilling rig Model Unit KHYD110 Rated output power of motor kw 5.5 Rated voltage of motor v 380/660 Rated frequency of motor hz 50 Rated current of motor a 11.6 Motor speed r/min 1440 Motor phase number three phase communication Rated working mode continuity Drilling speed mm/min 280 Speed of return m/min
1.Brief introductions of KHYD140 electric rock drilling rig for coal mine KHYD140 electric rock drilling rig is a tool for rock blasting hole. ·electric rock drilling rig should be equipped with drilling stand, and can be horizontally forward or inclined upward to drill in any direction. ·In order to prolong the service life of drill bits and improve the working conditions of operators, water draining powder is called wet drilling. ·In the operation of drilling rig, we only need to operate the hand wheel, and the electric motor rock drilling rig can push itself forward and return quickly. 2.Specifications of KHYD140 electric rock drilling rig for coal mine Model KHYD140 Rated output power of electric motor kw 5.5 Rated voltage of electric motor v 380 Rated frequency of electric motor hz 50 Rated current of electric motor a 11.6 Motor rotating speed r/min 1440 Motor phase number three phase communication Rated working mode continuity Drilling speed mm/min 280 Maximum axial thrust n 12000
1.Brief introductions of KHYD125 electric rock drilling rig ·electric rock drilling rig can be fitted with drilling rigs, and can be drilled horizontally or inclined upward or upward. ·In order to prolong the service life of the drill bit and improve the working conditions of the operator, wet drilled water can be used to discharge the powder and screw blade drills can also be used for dry draining. ·In drilling operations, we only need to operate the hand wheel, and we can advance and return quickly. 2.Specifications of KHYD125 electric rock drilling rig Model Unit KHYD125 Rated output power of electric motor kw 7.5 Rated voltage of electric motor v 380/660 Rated frequency of electric motor hz 50 Rated current of electric motor a 15.4 Motor rotating speed r/min 1440 Motor phase number three phase communication Rated working mode continuity Drilling speed mm/min 280
1.Brief introductions of KHYD155 electric rock drilling rig for coal mine KHYD155 electric motor rock drilling rig is a tool for rock blasting hole. ·electric motor rock drilling rig should be equipped with drilling rigs, and can be drilled horizontally or inclined upward in any direction. ·In order to prolong the service life of drill bits and improve the working conditions of operators, water draining powder is called wet drilling. ·In the operation of drilling rig, we only need to operate the hand wheel, and the electric motor rock drilling rig can push itself forward and return quickly. 2.Specifications of KHYD155 electric rock drilling rig for coal mine Model KHYD155 Rated output power of motor (kw) 7.5 Rated voltage of motor (v) 380/660 Rated frequency of motor (hz) 50 Rated current of motor (a) 15.4 Motor rotating speed (r/min) 1440 Motor phase number three phase communication Rated working mode continuity Drilling speed (mm/min) 280 |
1.Brief introductions of ZDY-1200S full hydraulic tunnel drilling rig ZDY1200S full hydraulic tunnel drilling rig is a full hydraulic power head structure with wide speed range, large torque and strong lifting and drawing ability. It is suitable for the construction of advanced detection hole, geological exploration hole, gas drainage hole, water injection hole and other engineering holes in coal mine. ZDY1200S full hydraulic tunnel drilling rig is composed of three main parts, main engine, pump station and control table. It has good disintegration, convenient relocation and transportation. It can be arranged flexibly according to the situation of the site; it has linkage function and simple and flexible operation; it uses double pump confluence system to drill down fast and work efficiency high; the diameter of the power head through hole is large and the replacement of different diameter of the diameter of the drill can use the drill pipes of different diameter. The length of the drill pipe is not limited by the structure size of the drilling rig itself; it is used to support the oil cylinder to adjust the angle of the fuselage to be convenient and labor-saving. At the same time, the support of the fuselage is safe and reliable. The control handle is concentrated on the control table, and the worker can operate in a long distance, so itâ??s good flexibility and high safety. 2. Specifications of ZDY-1200S full hydraulic tunnel drilling rig Project Unit Parameter Maximum drilling depth m 200 Borehole diameter mm Ф75 Drilling pipe diameter mm Ф42/Ф50 Drilling angle ° 0-±90 Output torque n.m 350-1200 Ability to feed kn 36 Ability to pullout kn 52 Rotating speed r/min 80-280 Rated advence speed m/s 0-0.45 Hardness range (protodyakonov scale of hardness) fâ?¦10 Main engine size mm 1850*710*1460 Total weight (excluding the drill rod) kg 1360 Main engine weight kg 750 Motor power kw 22 Shandong Master Machinery Group Co.,Ltd. Sales Manager:Coco Yan Tel:0086-537-2335787 Mob: 0086-18865479508 Wechat:008618865479508 Whatsapp:008618865479508 QQ:2648769002 E-mail:sale05@huaxiamaster.com Website:www.huaxiamaster.com
1.Brief introductions of ZLJ350 grouting reinforcement drilling rig ZLJ350 grouting reinforcement drilling rig ismainlyusedforgrouting reinforcement hole. ZLJ350 grouting reinforcement drilling rig work for under mine, tunnel, subway, slope support. The drilling rig can work different angles of grouting reinforcement and drilling hole. This drilling rig adopts mechanical drive, hydraulic feed with small size, light weight, The rig is reliable and convenient to operate. 2.Specifications of ZLJ350 grouting reinforcement drilling rig Drillingdiameter 50-113mm Drillrodcaliber 42mm Noncoringbit 50-113mm Corebit 56-113mm Verticalratedspeed 340/192/112r/min Verticalshafttorquerating 130/ 230 /400n.m Mainshaftangle 0-360 Spindlestroke 400mm Systempressurerated 8mpn Feedforce 9kn Elevatingpower 12kn Winchliftingcapacity 7.35kn Capacityofdrum 26.8m Diameterofwirerope 8.85mm Oilpumptype YBC-12/80 Motorpower 5.5kw Dimension 1230*630*1280mm Total weight 430kg
1.The range of application of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod is suitable for soil layer, clay layer, fill layer, silt layer, silt layer and some strata containing pebbles, gravel and strong weathered rock. It is widely used in building construction,, high speed rail contact network support, slope protection pile, city construction, civil building, new rural construction, power grid transformation, garden greening and many other projects. 2.The characteristics of 15 meters crawler rotary pile drilling rig with square power rod High efficiency and energy saving hydraulic system, large torque full hydraulic power head, 360 degrees of free rotation, wide application, high construction efficiency, stable performance, environmental protection and energy saving and other advantages, deep pile driving, fast speed convenient displacement. compared with large rotary drilling rig,This drilling rig has the characteristic of low cost of purchase, low cost of transportation, quick income. These characteristic shows its economy and engineering adaptability. 3.The technical parameters of 15 meters crawler rotary pile drilling rig with square power rod The 15 meters crawler rotary pile drilling rig with square power rod adopts two kinds of drilling models, self weight pressure and cylinder pressure, which can achieve 5-15 meters deep and using different sizes of drilling tools, the maximum diameter of pile holes can reach 1500mm. Item Unit Parameters XWDF-15 crawler rotary pile drilling rig with square power rod Working mode cylinder pressure wire rope deadweight Drilling hole diameter mm 500-1500 Drilling hole depth m 15 10-26 Dimension m 8.7*2.3*3.1 Weight (excluding drilling tools in standard configuration) t 13 Maximum torque of power head kn.m 26000 Power head rotating speed r/min 20-40 Turntable rotation angle Full gyration Maximum moving speed km/h 2.6 Maximum grade ability ° 25 Engine model / 6105 medium cold turbocharging in Weifang Engine power kw 145 (In the continuous improvement of products, technical parameters are based on practical consultation.)
1.Brief introduction of BXZ-2L vertical backpack core drilling rig BXZ-2L vertical backpack core drilling rig is a removable core sample drilling rig. The rig is mainly used in mineral exploration, geochemical exploration, shallow sampling, geoscience research, geotechnical engineering, engineering investigation, oil field exploration, water conservancy engineering survey, highway engineering survey and so on. The main features of BXZ-2L vertical backpack core drilling rig are compact structure, detachable, small volume, light weight, easy to carry; imported kohler brand gasoline engine with large horsepower and guaranteed drilling depth with drilling frame. Field operation is more convenient and safe. 2.Specifications of BXZ-2L vertical backpack core drilling rig BXZ-2L vertical backpack core drilling rig Engine brand Kohler House power 7.75 HP Fuel tank capacity 1400 ML Transmission mode gear-driven Starting mode recoil pull starter Clutch mode automatic clutch Coring mode rotary Rate of penetration 540r /min Gear ratio 7:1 Transmission mode CVT (continuously variable transmission) Drill pipe diameter 32mm Drill pipe total length 30m Drill hole diameter 32-120mm Net weight 52 kg Size 550*450*420mm Packing measurement 1050*600*550mm 3.Configuration list of BXZ-2L vertical backpack core drilling rig Item Parameter Unit Number Vertical backpack core drilling rig BXZ-2L set 1 Drilling pipe including joint(mm) 32 *800 pc 38 Reducing nipple(mm) 46 pc 1 Coring barrel(mm) 46 *700 pc 1 Alloy bit(mm) 46 pc 1 Diamond bit(mm) 46 pc 1 Reducing nipple(mm) 60 pc 1 Coring barrel(mm) 60*700 pc 1 Alloy bit(mm) 60 pc 1 Diamond bit(mm) 60 pc 1 Mud pump (gasoline engine) set 1 Inlet hose pipe(mm) 20*1000 pc 1 Inflow water filter pc 1 Outlet hose pipe(mm) 13*1000 pc 1 Water supply pipe(mm) 13*4500 pc 1 Safety clamp grasp 1 Pipe wrench grasp 2 Safety plate pc 1 Spark plug pc 1 Ring gasket set 1 Water seal set 1 Shandong Master Machinery Group Co.,Ltd. Sales Manager: Kevin Tel:0086-537-2335787 Mob: 0086-18865479503 Wechat:008618865479503 Whatsapp:008618865479503 QQ: 256618593 E-mail:sale03@huaxiamaster.com Website:www.huaxiamaster.com
1. Brief introductions of KQZ-70D pneumatic-electric DTH drilling rig KQZ-70D pneumatic-electric DTH drilling rig is a new type of high efficient drilling rock equipment designed for water conservancy projects and construction sites. It is widely used for drilling in all kinds of rock strata in open pit, water conservancy and construction slope treatment. KQZ-70D pneumatic-electric DTH drilling rig is a percussive rotary drilling rig. Its internal structure is different from that of a general jack drill. Its valve train and reciprocating piston mechanism are independent, that is impactor. The front is directly connected to the bit, and the back is connected to the drill pipe. when drilling the rock, the impactor dive the hole. The piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom. 2. Features of KQZ-70D pneumatic-electric DTH drilling rig Small in size, light in weight, suitable small space that large and medium-sized drilling rig can not work , convenient and flexible. 3.Specifications of KQZ-70D pneumatic-electric DTH drilling rig KQZ-70D Borehole diameter mm 50-80 Drilling depth m 10-15 Rotating speed r/min 112 Air consumption m³/min 3.5-4.5 Cylinder diameter mm 90 Drilling pipe mm 42 Motor power kw 3 Main engine length mm 1524 Main engine weight kg 148
1.Brief introductions of KQZ-100D pneumatic-electric DTH drilling rig KQZ-100D pneumatic-electric DTH drilling rig is a new type of high efficient rock drilling equipment, designed for water conservancy projects and building materials sites. It is widely used for drilling in all kinds of rock stratum and drill hole. For example, water conservancy and construction slope treatment. KQZ-100D pneumatic-electric DTH drilling rig is an impact rotary drilling rig. Its internal structure is different from the general drilling machine. Its gas distribution and piston reciprocating mechanism are independent with each other. The front end is directly connected to the bit, and the back end is connected to the drill pipe. When it is divided into the hole, the impactor will rotate in hole. the piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom. 2.Features of KQZ-100D pneumatic-electric DTH drilling rig Small volume, light weight, suitable for large and medium-sized drilling rig can not workplace, convenient and flexible. 3.Specifications of KQZ-100D pneumatic-electric DTH drilling rig KQZ-100D Borehole diameter mm 65-150 Borehole depth m 20-25 Rotating speed of drilling tools r/min 90 Air consumption m³/min 6-8 Cylinder diameter mm 150 Drilling pipe mm 50/ 60 Motor power kw 4 Main engine length mm 2400 Main engine weight kg 224
Application of Water Drilling Rig Machine: The drill is suitable for census exploration, geophysical exploration, road and building exploration and blasting drilling and other drilling projects. Can be based on the different layers of alloy, grit and steel drill bits for drilling. Can drill 2-9 level of sandy clay and bedrock, Rated drilling depth 100m, the deepest shall not exceed 120m, Nominal opening diameter of 110mm, the max. allowable opening diameter of 130mm, the final hole diameter of 75mm, drilling depth according to formation conditions. Advantage OF ST-100 Water drilling rig machine: 1. With hydraulic automatic feeding machanism to improve drilling efficiency, reduce labor intensity. 2. The use of ball-type clamping mechanism instead of the chuck can be implemented without downtime bat, easy to operate, safe and reliable. 3. With a pressure gauge indicating the bottom of the hole, easy to grasp the situation inside the hole 4. Handle focus, the operator side. 5. Compact structure, rigs, pumps and diesel engines are installed on the same bas, occupying a small venue. 6. Light weight. strong decomposition, easy to relocate, suitable for plain or mountain work.
1.Brief introductions of KY-250 hydraulic exploration drilling rig for metal mine The KY250 hydraulic exploration drilling rig for metal mine is ·small in size ·light weight ·convenient to install and operate ·excellent linkage and adjustable speed range ·suitable for drilling at any angle in the tunnel or surface. 2.Specifications of KY-250 hydraulic exploration drilling rig for metal mine Drilling diameter 36.5mm /46.5mm Drilling depth 250m¸33 Steel drill pipe/200m¸43 Steel drill pipe Borehole angle 0°-360° Spindle speed 400-1400r/min Spindle output torque 150-400nm Rated pulling force 40kn Rated pulling speed 0.3m/s Oil supply mode double gear pump Rated system pressure 16mpa Oil pump model CBF-F71/10 Hydraulic oil model antiwear hydraulic oil YB-N46/YB-N32 (winter) Motor model manual variable motor A6V80MA Motor specification 30kw Weight main engine 275kg/backbone 40kg/operating floor86kg/power car 420kg
1.Brief introductions of KY-300 hydraulic exploration drilling rig for metal mine KY-300 hydraulic exploration drilling rig for metal mine is suitable for drilling at any angle in the tunnel or surface. It is small in size, light in weight, convenient to install and operate with adjustable speed and good linkage performance. 2.Specifications of KY-300 hydraulic exploration drilling rig for metal mine Drilling diameter (mm) ¸47 Drilling depth (m) 300 (¸43 aluminum alloy drilling pipe) 240(¸43 steel drill pipe) Power 37kw (motor) Weight main engine 295kg/backbone66kg/operating station 86kg/power car 480kg
