Wire: SJT 18AWG/3C(Black,Green,White) Jacket:Black power cord: 312007-01 Terminal: 19099-0010
Wire: UL1007 22AWG Housing: 39-01-2080 Terminal: 39-00-0038 Housing: 39-01-3043 Housing: 39-00-0040
Wire: UL1061 24AWG Housing: 39-01-2020 Terminal: 39-00-0038 RJ45 connector Resistor: 470 OHM 1/4W 5% deviation Resistor: 10K OHM 1/4W 5% deviation Transitors: 2N3906
USB cable
High-voltage wire harness material: high-voltage wire, also known as high-voltage cable. Product description: The car wiring harness is the main body of the car circuit network, equivalent to the "artery" of human blood circulation, and the carrier of the car circuit. Of course, it is also the bridge and link of automotive electrical components, and the nervous system for automotive power and signal transmission and distribution. The high-voltage wiring harness can be configured in the internal wiring harness and the external wiring harness of the electric vehicle according to the voltage level. Application: It is mainly used for the signal distribution of the wiring harness inside the distribution box, transmits electric energy efficiently and with high quality, and shields the external signal interference. The high-voltage connection system consists of high-voltage wiring harnesses and connectors. AC/DC, DC charging ports, power motors, high-voltage wiring harnesses, inverters, power batteries, high-voltage boxes, electric air conditioners, etc. all require connectors; Therefore, the high-voltage wiring harness is the neural network of the high-voltage system of the new energy vehicle and is very important. The composition of high-voltage wiring harness: connectors, terminals, wires and cables, positioning clips (coverings), tapes, heat shrinkable tubes, bellows (seals), sealing plugs, plugs, electrical test labels, etc. According to the voltage level: 600V, 1000V, 1500V, 3000V; According to the temperature grade: 125, 150, 180, 200; According to insulation performance: thermoplastic insulation and thermosetting insulation; According to shielding type: shielded cable and unshielded cable; According to the number of insulating cores: multi-core cable and single-core cable; Cable squares: 1.25, 2, 2.5, 3, 4, 5, 10, 16, 25, 35, 50, 70, 95, 120, etc.
Nowadays, electric vehicles are very common in society. Especially in recent years, new energy electric vehicles have made a breakthrough in sales and even have the opportunity to surpass traditional fuel vehicles. Compared with fuel vehicles, electric vehicles are special, with the characteristics of high voltage and high current. They are usually equipped with power supply systems with more than 300V and current of more than 200A. This is completely different from the traditional car only equipped with 12 / 24V power supply system. The safety measures of high-voltage distribution box, high-voltage line and connector of electric vehicle have become the safety aspects that need to be paid attention to. High voltage line of electric vehicle refers to the component of connecting circuit formed by punching copper contact terminal (so-called connector) and wire (cable) after crimping, wrapped with plastic compression insulator or external metal shell, etc. In terms of function, there are two kinds of power lines carrying the power of driving actuator (actuator) and signal lines transmitting sensor input commands. Power lines are divided into low-voltage harness and high-voltage harness. The traditional connector equipment has been difficult to meet the requirements of high current and high voltage. The connector of electric vehicle must be a high-power connection product. If it does not meet the requirements, the electric vehicle fire accident is inevitable. Electric vehicle connectors must be automotive grade products, and industrial grade products do not meet the requirements. The main indicators include IP grade, insulation grade, low resistance, error proofing and locking function. So, is electric vehicles safe? Analysis on safety technology and measures of high voltage devices is electric vehicle safe or not? Analysis of safety technology and measures for high voltage devices: high voltage harness is the cable between the connectors in the electric vehicle and is a very key connector to support the safe operation of the whole vehicle. First, it is required to be shielded, have IP grade, prevent overheating or combustion. The vehicle is used in a harsh environment. If it does not meet the requirements, it is the most prone to spontaneous combustion. Therefore, electric vehicle high-voltage line plays an important role, and the quality of electric vehicle high-voltage line is very important. #omgevcable
As a bridge connecting the pile and the vehicle, the charging cable briefly introduces the characteristics and differences between TPU and TPE. The English name of TPU is the abbreviation of thermoplastic polyurethane. The main characteristics of TPU are: a wide range of hardness, and with the increase of hardness, its products still maintain good elasticity and wear resistance, high mechanical strength, outstanding cold resistance, good processing performance, oil, water and mold resistance, and good recovery and utilization. Under the condition of high hardness, the elastic loss of TPE is greater than that of TPU. TPE English name is the abbreviation of thermoplastic elastomer, which means thermoplastic elastomer. It has the characteristics of environmental protection, non toxicity, safety, wide hardness range, good coloring, soft feel, weather resistance, fatigue resistance, high temperature resistance and so on. It can be recycled and reduce costs. At present, the insulation and protection materials of automobile harness with temperature grade of 105 and below are mostly PVC materials. PVC materials for domestic automobile harness often have some disadvantages, such as rough extrusion surface and poor low-temperature performance. In view of this, combined with the special environment of automobile harness (such as narrow space, poor heat dissipation, frequent mutual friction, etc.), special requirements (thin wall, high-speed extrusion, etc.) and cost control requirements, it is necessary to study the PVC material for automobile harness to further improve its performance.
OMG is committed to becoming a world-class provider of cable solutions for new energy vehicles, and was rated as one of the top 100 enterprises in core parts of electric vehicles in 2017. OMG has invested a lot of resources in the independent research and development of new energy electric vehicle conduction products since 2009. OMG's national standard electric vehicle cable has occupied the main domestic market since 2018. Among them, en standard charging cable and UL standard charging cable have been exported to BMW, Mercedes Benz, Porsche Foreign customers such as pod point. OMG electric vehicle charging cable has the following advantages: the product is soft, feels good, and the bending radius is less than 5D; Oil resistance, acid and alkali resistance, water resistance, wear resistance, tensile resistance, rolling resistance, cracking resistance, UV resistance and stable color; Good flame retardant performance; Bending resistance more than 50000 times; All materials comply with ROHS 2.0 & reach environmental standards.
As Per Client Requirements
AS PER CLIENT REQUIREMENTS
AS PER CLIENT REQUIREMENTS
AS PER CLIENTS REQUIREMENTS
AS PER CLIENTS REQUIREMENTS
AS PER CLIENTS REQUIREMENTS
solar cable clip for 2.5-6sqmm cable: 1.SUS304 materials; 2.suitable for 2.5-6sqmm cable. info@new-pv.com http://www.new-pv.com/products_show.asp?id=241
Place of Origin:Guangdong, China (Mainland) Brand Name: CWH Model Number:wire harness&cable assembly Application:Medical terminal:both original and local equivalent available molding material:PVC,TEP depends on customers' requirement cable:both original and local equivalent available length:depend on customer sample lead time:1-2 weeks tooling lead time:7-10 days Packaging Details:PE bags & cartons. Port:Hongkong or Shenzhen
All products are customized according to the drawings or samples provided by the customer Place of Origin:Guangdong, China (Mainland) Brand Name:CWH Model Number:wire harness&cable assembly Application:Instrument terminal:both original and local equivalent available molding material:PVC,TEP depends on customers' requirement cable:both original and local equivalent available length:depend on customer sample lead time:1-2 weeks tooling lead time:7-10 days Packaging Details:PE bags & cartons. Port:Hongkong or Shenzhen
OEM Welcomeï¼?Tell us your ideas or send us your drawings or sample Productï¼?Cable assembly wire harness Sample order: Acceptable Sample lead time: 1-2 weeks Experience: 6 years experience Certification: ISO9001,TS16949 Quality Control: 100% test before shipping
0.35dB for all MM, SM Low Loss 0.35dB & Standard Loss 0.60dB 100% Interferometer Test FSG brand connector kits IEC 61754-7 and TIA/EIA 604-5 Compliant for MPO/MTP interfaces
Place of Origin:Guangdong, China Brand Name:Mingxiu Model Number:UL10064 26AWG Type:insulated Application:Heating Conductor Material:Other Conductor Type:Stranded Insulation Material:FeP
