50m x 3m 62g/m2 50m x 2m 62g/m2 Colour Available in green, red, white, black and blue Packing Single rolls Using for : mainly used to cover building under contruction or re-construction, have a very widely used , such as sport fencing Temporary fencing, feed lots, chincken farms , public areas etc. Function: prevent people or objects falling to avoide or reduce falls and physical attack damage, safety for workers and pedestrians walking near the base of a scaffolding structure. According to customers' needs
Specification: NameFiberglass asphalt shingle Length1000mm(3.0mm) Width333mm(3.0mm) Height>=2.6mm/5.2mm Tensile strength(longitudinal)(n/50mm)>=530 Tensile strength(transversal)(n/50mm>=550 Heat resistanceNo flow, slide, drippage and bubble( FlexibilityNo crack being bent for Pe bag with fumigation pallet 21pcs/buddles
Item Sk-32Sk-34Sk-36Sk-38 Ai2o3(%)35385070 Fe2o3 (%)32.522 Refractoriness (sk32/ 1710¡æ34/ 1750¡æ36/ 1790 ¡æ38/1800 Refractorines under load, 0.2mpa, ta, (¡ãc)1300135014501550 Porosity(%)19-2219-2320-2421-24 Bulk density (g/cm3)2.10-2.152.15-2.202.25-2.302.35-2.4 Cold crushing strength (mpa)2525-304550 Thermal expansion at 1000¡æ (%)0.60.60.3- 230*115*64mm 512pcs/plt 230*115*76mm 384pcs/plt
1.Natural marble looking 2. Light translucent 3. Light and safe 4.Enviromental friendly 2440x1220x 6mm, customized size.
Expanded Perlite is an internal honeycomb structure of the white granular material made by preheated, baked and expanded perlite ore. Principle is: By preheating, fire, rapid heating(1000 above), then the moisture vaporizing,the crushed special size ore is expanded in softened ore to be porous structure, become original 10-30 times.The expanded perlite can be sorted to 3 shapes by the technical of expansion. Main features Lightweight Porous Heat-insulation Refactory Sound-absorption waterproof Non-toxic Corrosion-proof Applications: Insulating Concrete Plaster Aggregates Masonry Insulation Texturizing Agents Fireproof, Insulating Door Cores Ceiling Tile Beverage Filtration Dimensions
Flat bar, hot dip galvanized, 8mm welding Pallet
Tig welding, galvanized, oval, round, square Any
Item Company standard Jh pce Appearance Transparent pale yellow liquid Density (23 Ph value (23¡é) 6 Solid content (%) 50% Water reducing rate (%)25 Chloride content Na2so4content (%)5.0 Alkali content (%)5.0 Formaldehyde content (%)0.05 1.1ton/drum, 210kg/drum.
Not fade, easier maintaining, short lead time, manufacturer Colors White , hemp white , honeysuckle, dark yellow , flowing sand white , ivory yellow , composite crystallized glass Size 1200mm2400mm, 1000mm*1000mm, 800mm*800mm, (15mm 20mm, 25mm, 30mm)
Moss hardness:6.5moh’s scale Thermal expansion coefficient:80x10/°c Bulk density:2.7g/cm3 Colors White , hemp white , honeysuckle, dark yellow , flowing sand white , ivory yellow , composite crystallized glass Tiles: 60x60, 60x120cm, 120x120cm Slab: 240x120/140/160cm; 180x120cm; Thickness: 1.2cm, 1.8cm, 2.0cm, 2.5cm, 3.0cm;
1.Excellent functions of physics and chemistry than natural stone slabs. 2.Fine textured, solid surface, dense structure, evenly crystallized. 3.Rich in colors and wide in application. Dimension:w3200*1600mm 2700*1200mm 2400*1200mm 1000*1000mm 800*800mm 600*600mm e can cut to size as customed . Color: white , black, beige , super white, yellow in white , ect
Big size: 3200*1600mm Hot sale size :600*600mm Thickness option:a) 12mm b) 15mm c) 18mm D) 20mm e) 25mm f)30mm Packing: 1.With polished face to face and surrounded by foam 2) wooden crates
100% Virgin or Recycled Plastic Slat for Goetry Farm. Size Can be any size but ready to ship available size of 500x600mm and 500x500 mm Colors will be any color, ready to ship color is Dark Blue.
Self adhesive bitumen flashing tape is a self-adhesive, aluminum /hdpe film surfaced bitumen backed sealing strip. It is a quick, efficient and cost effective method of flashing, sealing and repair that produces a lasting protection in all climates. Self adhesive bitumen flashing tape is a self-adhesive, aluminum surfaced bitumen backed sealing strip. It is a quick, efficient and cost effective method of flashing, sealing and repair that produces a lasting protection in all climates. It is recommended for all substrate sealing repairs on asphalt, bituminous sheets, glass, metal, plastics, timber, mortar, concrete, bricks, roof tiles, stone. Seal guttering, downpipes, roof sheets or flashings. Seal cracked brickwork, concrete, titles or glass. Seal carport or verandah roof to main wall. Seal window frames, chimney, etc Technical information An aluminum foil/ hdpe film carrier A self adhesive rubber modified compound and A silicone coated release interleave( removed during application) Thickness: 1.0mm, 1.2mm, 1.5mm Available in rolls: 50mm x3m, 75mm x 3m, 50mm x 10m, 100mm x 10m, 150mmx10m, 225mm x 10m Special sizes made to order
Malthoid is a 2 ply felt material impregnated with bitumen which is also covered in a fine sand to prevent sticking when rolled. Malthoid is used for waterproofing of flat roofs and under corrugated iron water tanks, to prevent condensation corrosion. Usage: For prevention of rising moisture up through walls of brickwork etc., 90mm x 20mm roll 110mm x 20m roll 150mm x 20m roll 230mm x 20m roll 300 mm x 20m roll 1m x 20m roll 1m x 10m roll Special sizes made to order
A damp proof course ( dpc ) is a physical barrier inserted into the fabric of a building to stop water passing from one place to another. This can be on a horizontal plane, stopping water rising up from the ground by being sucked up by the dry masonry above, or vertically to stop water passing from the outside of a building, though the masonry, to the inside. Dpc's have taken many forms through the ages and one of the earliest forms was to use a layer of slate in the construction. Slate is still used but the less expensive plastic version ( below right ) is now more widely used. Technical specification of dpc Water vapour permeability 0.28 gm2 day-1 Bs3177 Water vapour transmission 733 mnsg-1 Water absorption 0.22% Bs2782 : 430a Resistance to leakage at joints Pass Moat 27 : 5.2.1 Tensile strength of joint Unaged : 300 n Heat aged : 290 n Water soak : 257 n Moat 27 : 5.2.2/3/4 Cold flex temperature −60¡ãc Bs2782 : 320a Tensile strength L : 12.9 nmm-2 T : 11.2 nmm-2 Bs2782 : 320a Elongation at break L : 415% T : 582% Bs2782 : 320a Tear strength L : 122 nmm-1 T : 96 nmm-1 Bba method Low temperature flexibility L :
Coun 2.00.25dtex Tenacit 11.5cn/dtex Elongation 7.5% Molulus 0.1-0.4% 28020 cn/dtex Hot water solubility(90 Packing p.P. Bag, 180kg net 12.96t / 20fcl container
Density¡êo2790-3070 kg/m3 Compressive strengtho1000-3000 kg/cm2 Modulus of elasticityo1.3-1.5x106 kg/cm3 Water absorptiono0.13 % Shore hardnesso> hs 70 Specific gravityo2.6 Wooden packaged, as customer demands
Sinoplank is an engineered wood product designed specifically for use as a scaffold plank. Product: laminated veneer lumber scaffold planks Application: for use as scaffold platforms or decks Material: structural laminated veneer lumber (lvl) Standards: osha (standards & regulations 29-cfr) 1926 subpart l, appendix a, bs 2482 specification for timber scaffold boards, as1577-1993 scaffold planks appendix a and appendix b Core: pine core and face Adhesive: phenolic adhesive for exterior use Section size: 38mm/42mm thick and 225mm/230mm wide Moisture content: maximum 16% moisture Lengths: 1.0 m to 6.0 m length range available End sealant: acrylic end sealant for moisture protection Approximate mass: 4.95 kg per lineal meter Edge branding: embossededge branding at customer request Finish: un-sanded faces, rounded edges, painted ends Proof testing: planks proof loaded and rigidity measured for verification of strength claims. Standard verification testing is regularly completed both in the mill and by the independent third party.
Sinoplank is an engineered wood product designed specifically for use as a scaffold plank. Product: laminated veneer lumber scaffold planks Application: for use as scaffold platforms or decks Material: structural laminated veneer lumber (lvl) Standards: osha (standards & regulations 29-cfr) 1926 subpart l, appendix a, bs 2482 specification for timber scaffold boards, as1577-1993 scaffold planks appendix a and appendix b Core: pine core and face Adhesive: phenolic adhesive for exterior use Section size: 38mm/42mm thick and 225mm/230mm wide Moisture content: maximum 16% moisture Lengths: 1.0 m to 6.0 m length range available End sealant: acrylic end sealant for moisture protection Approximate mass: 4.95 kg per lineal meter Edge branding: embossededge branding at customer request Finish: un-sanded faces, rounded edges, painted ends Proof testing: planks proof loaded and rigidity measured for verification of strength claims. Standard verification testing is regularly completed both in the mill and by the independent third party.
