A The HDMI Amplifier Switcher B Ultra Performance 3 Ports
Model Number: FCU2401 Type:Embedded System Development Boards and Kits Chipset:Allwinner A40i Application:IoT, V2X, industrial control, etc. CPU: A40i, quad-core processor Frequency: 1.2GHz Architecture:Cortex-A7 Structure:carrier board+ SoM RAM:1GB DDR3L Flash:8GB eMMC DI/ DO:4 RS485:2 RS232:2 CAN:2
WFLC-VI Portable Waveform Recorder is a portable device based on the structure of industrial portable computer. It takes high-performance DSP high-precision ADC chip and embedded operating system as hardware and software architecture and integrates data acquisition processing transmission storage analysis and other functions as one. DSP acquisition chip for data acquisition and calculation so as to achieve full digital analog signal filtering flexible and diverse sampling frequency from 10K /s 20K /s 50k/s 100K /s can be selected by users can be used for transient electrical signal waveform recording and analysis. With advanced industrial control kernel and embedded operating system users can easily carry out data storage backup analysis output and other operations WFLC-VI portable waveform recorder is a collection of fault wave record generator characteristic test and other functions in the integration of intelligent instrument with its small size strong function scope of application is wide flexible configuration and many other advantages favored by the masses of users is a power utility workers standing it will be for the electric power industry production and technological progress to make due contributions. The product names Waveform recorder waveform an
Quad-core ARM 64bit A53 @1.8GHz Processor 1GB DDRL3L System Memory 32MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS) 2x2 On-board 2.4GHz radio, up to 573Mbps physical Data Rate 2x2 On-board 5GHz radio, up to 1201Mbps physical Data Rate Support: QUECTEL RM500Q-GL Support: QCN9074 WiFi 6E Card CPU Qualcomm-Atheros IPQ6010 CPU Frequency Quad-core ARM 64 bit A53 @1.8 GHz processor System Memory 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design Ethernet Port 1 x 1Gbps Ethernet Ports & POE3 x 1Gbps Ethernet Ports , 1x 2.5Gbps Ethernet Port NGFF Slot M.2 (NGFF) â??E Keyâ?? Socket with MiniPCIe 3.0 SD Card Slot 1x SD Card Slot USB /header 1x USB 2.0 Port POE 24V~48V passive POE/Active POE(Suport 802.3bt) DC Jack 24V power supply LED header FFC/FPC Connector Serial Port 1x Serial Port 4 Pin Connector Wireless On-board 2x2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 23dBm per chain On-board 2x2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain 4 x MMCX Connectors Bluetooth CSR8811 BLE 4.2 Nor Flash 32MB Nand Flash 256MB DDR 256MB~512MB Dimension 185mm x 116mm
1. Standard USB2.0 (17.9Mb/s) signal 2. transmit distance up to 50m, 4 USB outputs 3. plug and play, no need driver 4. support all major OS, such as windows, Mac, linux
1. VGA flat cable 3+6 male to male 2. Tinned copper interface, oxygen free copper conductor and double aluminum foil shielding to make sure VGA ultra high speed transmission speed 3. gold-plated connector, avoiding oxidizing, signal transmission stable
1. Input-signal format:800*600, 1024*768, 1280*720, 1280*960, 1280*1024, 1360*768, 1600*900, 1920*1080 2. Output signal format:480p(60hz), 576p(50hz), 720p(50/60hz), 1080i(50/60hz), 1080p(50/60hz) 3. Output impedance: 75ohm
Characteristic and Application: 1.Gel-free cable core, using dry water-blocking material to provide good water resistance performance 2.Convenient for installation, reduce cable preparation and installation time 3.Speed fiber access and cleanup 4.Reduce the number of tools required 5.Metallic, non-metallic armored or unarmored 6.Duct, directly bury or aerial installation
All dielectric self-supporting aerial installation cable-ADSS Double Layer Aerial ADSS Cable is used for communication cable of overhead high-voltage electricity transmission system,it also can be used as communication cable at the areas where lighting is frequent or distance is big. Characteristic: 1.Two jacket and stranded loose tube design,stable performance and compatibility with all common fiber types. 2.Instead of aramid yarn or glass yarn,there is no support or messenger wire required,aramid yarn is used as the strength member to assure the tensile and strain performance. 3.Mainly installed at existing 220KV or lower voltage power lines.
Description: The PBT Loose Tube Optical Ground Wire (OPGW) is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires. Good anti-corrosion performance.Material and structure are uniform, good resistance to vibration fatigue. Application: The Aluminum tube is surrounded by single or double layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires.Good anti-corrosion performance.Material and structure are uniform, good resistance to vibration fatigue Characteristic: 1. Good anti-corrosion performance. 2. Material and structure are uniform, good resistance to vibration fatigue. 3. Short circuit current has small effect on the optical fiber transmission properties. 4. Good anti-lightning performance. contact us: www.gl-fibercable.com Email:sales@gl-fibercable.com
Product name:external usb3.0 embedded ngff m.2 2230 2242mm hard disk drive ssd hdd enclosure Model:LM-841U Material/Finish:Aluminum with Oxidation/Sand blasting Chipset:ASM1153E With:USB Embedded Interface:1x USB3.0 Part Dimension:85*25*8mm Part Net Weight:21g Packing Gross Weight:46g Speed:Up to 6GB/S Support SSD driver:22 x 30mm/22x42mm NGFF(M.2) Assembly:Screws, suitable for all SSD Hard Disk OS support:Win8.1/8/7/VISTA/XP/MAC/Linux, free driver, support USAP Operating Temperature:5-40 Degrees Celsius Storage Temperature:-20-70 Degrees Celsius Packing Details: 1.SSD Enclosure *1pcs 2.Screwdriver*1pcs
7port usb3.0 pci express adapter card Brand:WBTUO Model:LTU352 Port:5 excternal plus 2 internal usb3.0 port Transfer speed:5Gbps Power support:Power SATA Chipset:VL805 plus VL812 Color:Red Key features: 1.Compatiable with sub2.0 and usb1.1 devices 2.Supports simutaneous operation of multiple usb3.0 and usb2.0 devices 3.Supports 2 downstream ports for all speeds 4.Bus powered mode and no external power required for most of peripherals 5.power connector available for high current consumption peripherals 6.5external plus 2 internal usb30 ports 7.Max data transfer rete up to 5Gbps 8.Full compliant with single-lane(x1) PCI Express2.0 specificaiton 9.Power sara connnector supports extra power,no external power in needed 10.Full plug & play and hot swag compatiable connect 11.Systerm requirement:PCIE-E slot(Not fit in a standard PCI slot,only PCIE) 12.Drive support:Window 2000 XP/VISTA/7/8 Packing Details: 1.PCI Express card 1pc 2.CD disk 1pc
External USB3.1 USB C 2Ports MSATA Raid0 Raid PM hard disk ssd hdd caddy hdd caddy external hard drive hard disk usb c Shenzhen WBT Technology Co.,Ltd LR31-1352S Specification Model: LR31-1352S Product Name: External USB3.1 USB C 2Ports MSATA Raid0 Raid PM hard disk ssd hdd caddy Chipset: ASM1352R+1542 Internal interface: MSATA*2 Output interface: USB3.1 usb c Transfer speed: 10Gbps Enclosure material: aluminum-magnesium alloy Product measure: 100mm* 70mm* 9mm Color version: Gold /silver Product weight: 94g Applied SSD version: 30*30/30*50mm Support model: Raid0,Raid1,PM OS support: All WINDOWS/ Linux / Mac (free driver) Features: 1.USB 3.1 is the latest USB specification which was sponsored by Intel and other large companies. 2.USB3.1 compatible with existing USB 3.0 software stack and device protocols, USB 3.1 as the next generation of USB transmission specifications, commonly referred to as "SuperSpeed +" 3.USB3.1 maximum transfer rate of up to 10Gbps, backward compatible with USB3.0 and USB2.0. 4.USB3.1 standard power supply is 20V / 5A / 100W 5.Support RAID mode. RAID0,RAID1,PM Packing details 1.SSD Enclosure *1pc 2.USB3.0 AM To Type-C *1(cable length:25CM) *1pc 3.Screwdriver*1pc 4. Screws *4 sets
LT501 Specification Model: LT501 Product Name: china online shopping usb3.0 ssd enclosure mini 10pin connector hdd case 2.5 usb 3.0 Size: 2.5" enclosure Material: Aluminum Product measure: 13.5*78*126mm Color version: Red;black; blue Product weight: 90g Suit for hard disk version: 10mm (thickness) and below Led Indicator: Yes Internal port: SATA3.0 External port: Mini USB3.0 Key Features 1. The HDD Enclosure provides a combination of cutting-edge technology, durability, flexibility and portability. Stylish, slim and simple to use. 2. Aluminum enclosure is designed for the latest 2.5" SATA hard drives. It's super fast USB3.0 interface allows it to easily integrate into any system and at super speeds 3. Also apply for 2.5" SATA-I or SATA-II hard drive (1.5Gb/s or 3.0Gb/s) 4. Mini USB 3.0 serial port (backwards compatible with USB 2.0) 5. Support Capacity:from 20GB - 1TB 6. Superspeed 5Gbps (625MB/s) 7. eSATA: Mac OS 10.4 or above 8. FireWire: Mac OS 10.2 or above 9. USB 3.0: Mac OS 10.7 or above 10. Your hardware device must have the correct corresponding port (e.g. USB 3.0, FireWire 800 or PCI-e) 11. System support: Windows XP/Vista/7/8 Packing details 1. HDD enclosure*1pcs 2. screw*8pcs 3. Screwdriver*1pc 4.Mini USB to USB cable 30cm*1pcs
Gold 10Gbps USB 3.1 Type C external mSATA hard disk case (1). Main Specification Model: LS31-21M Product Name: WBTUO wholesale alibaba Gold 10Gbps USB 3.1 Type C external mSATA hard disk case Chipset: ASM1351 Internal interface: mSATA*1 Output interface: USB3.1 Type C Transfer speed: 10Gbps Enclosure material: aluminum-magnesium alloy Product measure: L67 x W39 x H9.5mm Color version: Gold Product weight: 45g Applied SSD version: 30*30/30*50mm UASP Support OS support: All WINDOWS/ Linux / Mac (free driver) (2). Features: a). USB 3.1 super fast and high-capacity data transfer solution. b). Type C connector cable to fit new MAC Book and PC c). Compliant for USB 3.1 specification. d). Data transfer rate up to 10Gbps for USB 3.1. e). Compliant for SATA 3.2 specification. f). Data transfer rate up to 6.0Gbps for SATA 3.2. g). Stable chipset Asmedia-ASM1351 h). Supports 27mm half-height & 50mm full-height SSD. i). LED power indicators available. j). Easy installation & no driver required. k). No additional power required. l). Supports boot function. m). Supports Plug & Play and Hot-Swapping. n). Supports any OS, like Windows, WinCE, Mac & Linux etc. Please note that it supports mSATA Mini PCI-E SATA SSD only. It does NOT supports Mini PCI-E PATA, 1.8" Micro SATA & Airbook SSD. (3).Packing: 1.mSATA SSD Enclosure *1pc 2.USB3.0 AM To Type-C *1pc 3.Screwdriver*1pc 4. Screws *4 sets
Description In the gyxtw cable, single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound. Psp is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices between them to guarantee the compactness and longitudinal water-blocking performance. Two parallel steel wires are placed at both sides of the cable core while pe sheath is extruded over it. Application : aerial/ duct Temperature rage: Storing temperature:-40? to +70? Operating temperature:-40? to +70? Characteristics: ?excellent mechanical and temperature performance Guaranteed by the accurate excess fiber length. ?critical protection to fibers, based on the excellent Hydrolysis resistance and strength performance of tube material And special filling compound filled in the tube. ?special compact structure to avoid the loose tube shrinkage. ?excellent crush resistance and flexibility. ?psp enhances the cable crush-resistance, impact-resistance And moisture-proof. ?two parallel steel wires ensure tensile strength. Small diameter, light weight and installation friendliness with Long delivery length. ? excellent ultraviolet prevention with pe sheath. ? small diameter, light weight and installation friendliness Standards Comply with standard yd/t 769-2010 Technical parameters Cable type (increased by 2fibers) Fiber count Cable diameter mm Cable weight kg/km Tensile strength long/short term n Crush resistance long/short term n/100mm Bending radius static/dynamic mm Gyxtw 2 ~12 2 ~ 12 8.2 78 600/1500 300/1000 10d/20d Note: 1. Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard reel length: 3000m/reel: other lengths available on request.
Memory type: ddr4 Memory speed: 2133mhz ddr4 Memory size: 4gb Memory channels: dual Memory socket: so dimm Memory cas latency: cl15 Pins: 288 Voltage:1.2v Function: non ecc memory Chip: original chips.(brand new ) Warranty:life time
Key features: Dc3.3v ~5v power supply, uart-ttl interface Compliant with iso14443a/b, iso15693 standard, Support mifare classic 1k /4k, mifare ultralight/ultralight c, mifare pro, iso14443a-4 contactless cpu card, i code sli, ti 2048, etc External antenna, reading range up to 5 ~ 7cm External led and buz available (external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption Max current
Key Features: Frequency available with 125KHz, 134.2KHz 3.3V ~ 5V DC Power supply, UART-TTL interface Compatible with ISO11784,11785 Standard , support FDX-B Support to Read/write Hitag 1 Tag, Hitag S64/ 256/2048 animal tag, Read UID of EM4100/4200, TK4100 cards; Available to format Hitag S series card to ID card or FDX-B animal ear tags format; External antenna, reading range up to 5~7 cm External LED&BUZ available( external driver circuit needed) Technical Parameters: Electrical Specification Power supply DC 3.3V~5V Power consumption < 45mA Operation frequency 125KHz &134.2KHz Baudrate 9600~115200 bit/s ( default 9600bps) Interface UART TTL Antenna External, stamp-hole Reading range 50- 100mm (depends on tag and antenna size) Mechanical Specifications Dimension 25mmx16.5mmx2.8mm (LxWxH) Weight 3g Material FR-4, Blue Model CHK103MT Environmental Conditions Operation temperature -20°C�? +80°C Storage temperature -40°C�? +85°C Humidity Relative humidity 5%�?95% Supported Standard/ Tags EM4100,EM4200, TK4100 ISO/IEC 11784/11785 Hitag 1, Hitag S 64, Hitag S 256, Hitag S 2048 SDK information Demo software Windows, C# program language Files Comprotocol document API document User Manual Demo.exe
Key features: Frequency available with 125khz, 134.2khz 3.3v ~ 5v dc power supply, uart-ttl interface Compatible with iso11784, 11785 standard , support fdx-b Support to read/write hitag 1 tag, hitag s64/ 256/2048 animal tag, Read uid of em4100/4200, tk4100 cards; Available to format hitag s series card to id card or fdx-b animal ear tags format; External antenna, reading range up to 5~7 cm External led&buz available( external driver circuit needed) Technical parameters: Electrical specification, Power supply, dc 3.3v~5v Power consumption , < 45ma Operation frequency, 125khz &134.2khz Baudrate, 9600~115200 bit/s ( default 9600bps) Interface , uart ttl Antenna, external, stamp-hole Reading range , 50- 100mm (depends on tag and antenna size) Mechanical specifications , Dimension , 25mmx16.5mmx2.8mm (lxwxh) Weight , 3g Material , fr-4, blue Model, chk103mt Environmental conditions , Operation temperature, -20c +80c Storage temperature, -40c +85c Humidity , relative humidity 5%95% Supported standard/ tags, , em4100, em4200, tk4100 Iso/iec 11784/11785, hitag 1, hitag s 64, hitag s 256, hitag s 2048 Sdk information , Demo software , windows, c# program language Files , comprotocol document Api document User manual Demo.Exe
