This W28 series brushless DC motor(Dia. 28mm) applied rigid working circumstances in automotive control and commercial use application. This size motor is very popular and friendly for users for its relative economic and compact comparing to big sized brushless motors and brushed motors,which with stainless steel shaft and 20000 hours long life requirement requirements. Application Inkjet Printer,dispensers, printers,paper counting machines, ATM machines and etc.
Dimension:60*60*140mm Product weight: 190g Working voltage: 2.5W Battery build-in (optional): 1050MAh UV-LED: 80*20*8mm UV-LED lifetime: 15,000 hrs Light wave parameters :254nm Work cycle time: 30 mins
1. Compatible to any kinds of ink, including normal waterbase dye ink and pigment ink. 2. Waterproof and glossy. 3.thickness 0.76mm (CR80/30mil), 4. Can sign direct to pvc card using pen. 5. Good Quality 6.No need to cut, No need to Laminate Direct printing using tray for epson printer.They could be used for PVC Plastic Cards,Membership Cards,Educational ID Cards,Employee ID Cards,Promotional Cards and ect. You could start printing directly on PVC ID using your existing Epson L800 T60 P50 T50 R230, R270,R280,and ect. with Dye inks (standard inks) and pigment ink, that makes your printer life last longer.
The card tray for Canon J type printer IP4600 IP4700 IP4760 IP4980 MX630 MG5230 MG6120 and ect and more helps with your ID printing needs.The tray fits standard pvc cards,and you can print two cards at the same time.Pirnt ID cards for your company or organization,will cheaper than thermal printers.Use our special blank cards made for inkjet printing and make you IDs look great! 1.Use this id card tray in place of CD/DVD on these printers: Canon inkjet printer. 2.There are slots for two cards to be printed at the same time. 3.You can print any ID card you imagine or create! 4.The tray fits standard pvc cards but make sure you only use special pvc cards. 5.The inkjet PVC card tray works with the Epson printers. 6.With Dye ink or pigment ink, it makes your printer life last longer.
The card tray for Canon printer IP7240 IP7250 MX923 MG5420 MG5430 MG7120 and ect and more helps with your ID printing needs.The tray fits standard pvc cards,and you can print two cards at the same time.Pirnt ID cards for your company or organization,will cheaper than thermal printers.Use our special blank cards made for inkjet printing and make you IDs look great! 1.Use this id card tray in place of CD/DVD on these printers: Canon inkjet printer. 2.There are slots for two cards to be printed at the same time. 3.You can print any ID card you imagine or create! 4.The tray fits standard pvc cards but make sure you only use special pvc cards. 5.The inkjet PVC card tray works with the Epson printers. 6.With Dye ink or pigment ink, it makes your printer life last longer.
Size of Product : 350mm x 210mm x 1.8mm For producing personality ID card. Now you can print directly on PVC ID card using your existing Epson printer with Dye/Pigment inks. No need of ID PVC Cutter and Lamination!! Packing : 150pcs/carton
Pcb maufacturing machines The equipment is used in processing of character printing on pcb, which replaced of the traditional screen printing to provide a high-precision, high-quality and efficient characters production solutions for pcb manufacturers. Legend inkjet printer characteristics 1.High precision: adopt special precision linear motion guide modules, servo control, multi-point positioning and compensation technology. 2.High-quality: high definition printing characters: strong adhesion�?easily across the line. 3.High effidency: using high-performance led-uv ink curing systems, the curing time is short; bi-directiontal print technotogy allows a substantial increase in production efficiency: linear motor technology ensures accurate bidirectional printing, making it a practical solution. 4.User-friendly: clamping with a key, easily loader, the double printing platform options for different print media, and is well prepared for the coming new ink printing technology. 5.Customized: the hardware and software are self-developed in order to master core technologies and customize personalized solutions for customers
HF vaccum drying chamber for timber 1) PLC automatic control with touch screen interface. Fault self-check system. 2) Machine passed REGULATIONS FOR ELECTROMAGNETIC RADIATION PROTECTION. Safe for operators. 3) Fast drying cycle: High frequency dielectric heating. Drying wood more than ten times faster and more uniformly than traditional kiln. 4) Vacuum minus pressure drying. Much safer for wood. There is no wood crack, color change problems. 5) With hydraulic system and press. During the drying process, hydraulic system will give pressure on wood. After drying, wood will not bend. 6) Integrated design of cooling system. Save floor area and more humanized. 7) Humanized and safe design on tank door and feeding cart. It doesn't need additional rail outside and easy to load wood, open and close tank door. 8) Advanced temperature inspection system. Test the wood temperature correctly and will not disturbed by High frequency. 9) Advanced Wood weight measurement system. It can test the wood weight at any time. Then can show the wood moisture at present. 10) Worm and bacteria killing. 11) Do not need boiler. No pollution. 12) Schneider, Omron, Siemens etc European spare parts: International standard, good quality and easy to replace Our engineers can provide overseas installtion, training and are available to provide after-sell service and maintenance. We recommend proper training for safe and prolonged use of the machinery. Product Application High frequency is also called Radio frequency, it applies heating with high frequency. It can penetrate wood deeply and dry the wood moisture from core to the surface uniformly. It also equips vacuum together. The drying effects is much better. It is suitable for all kinds of wood, especially for large wood beams, hard wood, rare wood as well as veneers drying. HF Vacuum Wood Drying Machine is many times faster than traditional kiln dryers. Model GGZ-3-DT GGZ-4.5-DT GGT-6-DT GGT-10-DT Effective Wood Capacity L*W*H(mm) Engine 3000*1000*1000 4500*1000*1000 6000*1000*1000 6000*1300*1300 Output Power 30KW 30KW 50KW 80KW
High quality GKG-G5 automatic screen printing machine smt stencil printer Product Description if interest �fell free to let me know�jack@goldlandsmt.com 1. printing accuracy: ± 0.025mm 2. Repeatability accuracy: ± 0.01mm 3. Printing cycle:
Brand/Label Gateway Model No FB3358 Print Size 270mm 550mm Printhead Epson DX5 Â Print Speed A3 size (1440 1440dpi)/7min Print Resolution 144 1440dpi Print Height 17cm Net/Gross Weight 80KG/125KG Printer Dimension 750 900 600mm Print Color CMYK+WWWW CMYK+CMYK
1.300mm/s high speed printing, easy to maintain, improve work efficiency 2. Low noise, high speed image & characters printing 3. Easy paper loading, with auto cutter, partial/full cut optional 4.Standards:CCC,CE,FCC 5. Parallel, Serial, USB, Ethernet interfaces optional. (support two in one or three in one) 6. Support paper out alarm and print prompt
POSOUDA-P10/P1OIL POS thermal printer Print method Direct thermal line printing Resolution180x180PI Print width72mm (Max) Print speed200mm~230mm/s(Max) Print MemoryRAM: 2M Flash. 2MB(standard), 4MB(optional) SensorsPaper end sensor, TPH position, TPH overheating protection, Print voltage DriverWindows drivers(Win2000/P/2003/VISTA/2008/Win/Win8 Linux CUPS, MAC InterfaceOptional: Serial, Parallel, USB, Ethernet Serial+USB+Ethernet Cash drawer control1-2 cash drawers Barcodes:1D: upc-a, upc-ejan8 (EAN8)AN13(EAN13) CODE 39, CODE 93, CODE 128, ITF,CODABAR 2D: PDF417, OR, MAXICODE, GS1 Databar Fonts:Font A 12x24, Font B 9 x17, kanji 24x24 Character set95 Alphanumeric, 13 types of international characters, 128x56 Graphic(includinguser-defined page), Traditiona/Simple Chinese, Japanese, Korean(optional) Character modificationRotate(0, 90, 180, 270-) enlarge(1-6x) Graphics printingBitmap image downloading and direct bitmap image print, RAM bitmap download: buffersize 128KB, FLASH bitmap download: buffer size 512KB Paper typeContinuous paper, Marked paper Paper thickness:0.06-0.08mm Paper Paper width:82.5±0.5mm,80±0.5mm,76±0.5mm,69.5±0.5mm.57±0.5mm Paper roll OD:83mm(Max) Paper cut:Full cut, Partial cut Input:100-240VAC,50-60Hz Power supply Output:24±5V15A Reliability Print head lifetime:150km Cutter lifetime:1, 500,000 cuts(full cut, paper thickness: 0.065mm) MCBF60.000.000 lines MTBF360.000 hours Operation conditions5~45â??20~9040â?? Environment Storage conditionsï¼�40~60â??20~9340C Dimensions:145(w)mmx195(L)mmx141(H)mm Packing specification: 242mm*165mm*210mm Weight:1.45Kg Standards:CCC,CE, CB, FCC, UL
DEK Horizon 03iX Machine Standard Configuration: Standard Configuration Specification Machine Alignment Capability >2.0 Cpk @ +/- 12.5µm, (±6 Sigma) # Process Alignment Capability >2.0 Cpk @ +/- 25µm, (±6 Sigma) # Core Cycle Time 10 secs (9 secs with HTC option) Maximum Print Area 510mm* (X) x 508.5mm (Y) Printer Construction One piece optimised welded frame ISCANTM Machine Control Motion control using CAN BUS network Operating System Windows 7 Standard embedded Operator Interface Colour TFT touch screen display, keyboard and trackball with DEK InstinctivTM software. Machine mountable on either left or right hand side. Camera HawkEye® 750 digital camera, using IEEE 1394 interface. Multi channel. LED lighting.FOV 11.3mm x 8.7mm. Inspection window 26mm2 Camera Positioning Rotary motors and encoders with 4 micron resolution Squeegee Pressure Mechanism Software controlled, motorised Stencil Positioning Manual width screen depth adjuster Stencil Alignment Motorised via actuators X, Y, and Theta Squeegee Clamped double trailing edge squeegee (1 set included) Machine Interface Upline and downline FMI included Connectivity RJ-45LAN (networking) and USB2 interface available Tri Colour Beacon Programmable with audible alarm Documentation Hard copy manuals comprising: Operator,Installation, Electrical Drawings. On board technical manuals and tutorials supporting operator functions. DVD containing manuals and tutorials. ABOUT US GOLDLAND ELECTRONIC TECHNOLOGY CO., LTD focus on global Surface Mount electronic assembly sector for 10 years. We mainly provide competitive price and high quality products for various brands of SMT equipments, SMT feeders, SMT nozzles, SMT feeder spare parts, AI equipments, AI spare parts and other related products. The brands is: FUJI, KEM, PANASERT, YAMAHA, JUKI, Hitachi, Universal, Siemens, I-pulse, Assembleon, DYNAPERT, TDK and so on We have large quantity stock and good source for Feeders/ feeder spare parts, feeder trolleys, Nozzles, Heads, Servo Motors, Drivers, Control boards and other related parts for Siemens/ASM/SIPLACE X-Series machine(such as: X4i S, X4 S, X3 S, X2 S,ect. ), KME CM402/ CM602/ NPM/ AM machine, FUJI NXT M3/M3S/M6/M6S/AIMEX series machine, YAMAHA YS/YG/YV series machine, JUKI KE2000/FX series machine, Universal Advantis/Genesis/GSM series machine, etc. contact�jack(at)goldlandsmt(dot)com
Colorful 1.75mm dimension filament compatible with most 3D printers and pens, such as for MakerBot, Anet A8 A6 etc. Popular 3D printersEnvironmental friendly PLA printing material of starch that extracted from corn, cassava, etc.1kg plastic spool packaged, support automatically feeding.Printing temperature around 190°C - 220°C.Best materials for DIY 3D printing loversWe can provide 45 common colors for choice, we can also accept buyerâ??s OEM customized colors, just provide a sample or pantone No. We can make for you.WHY CHOOSE US ? 1. Excellent quality ( raw materials imported and then modified)2. Smaller diameter tolerance and roundness, usually +/-0.02mm3. Wonderful colors ( our colors are more bright than others)4. Fast delivery ( we have 100kg/color for stock)5. Professional 3d printer filaments production line6. Extended durability, resistance and hardness.7. Bright color,smooth,no bubble .8. Lower melting point and better smell than ABS, flow rapidly, not blocking the nozzle.We have 45 common colors always in stockFAQ:1. How to contact your company?A: Contact us as below guide, we're glad to provide you best price!!!2. What is material of MINGDA desktop 3d printer filament?A: PLA, ABS, nylon, wooden for large desktop 3d printer supplier Mingda.3. What is the material color?A: The material filament is single colored. But you have more than 20 color options.4. What's your product warranty terms?A: We provide 1 year warranty for our products. Mostly, customers will purchase some spare parts for urgent case.
Colorful 1.75mm dimension filament compatible with most 3D printers and pensEnvironmental friendly PLA printing material of starch that extracted from corn,, cassava, etc.1kg plastic spool packaged, support automatically feeding.Printing temperature around 190°C - 220°C.Best materials for DIY 3D printing loversThis is the best filament on the market.The 1.75mm filament holds a diameter tolerance of 0.02mm/0.0008" which improves reliability and quality of output and comes vacuum-sealed with the desiccant on a 1kg (2.2lb) reel.PLA allows higher print speed, more accurate placement of material with proper cooling (it does not shrink as much) and also thinner build heights because of less resistance from the plastic coming out the nozzle.We can provide 45 common colors for choice, we can also accept buyer??s OEM customized colors, just provide a sample or pantone No. We can make for you.WHY CHOOSE US ? 1. Large investment in R&D, eg: advanced laser line system to control diameter.2. Strict QC Department : Strict inspection before shipment to avoid any mistakes.3. Distributors in many countries : Easy to ship goods to your place.4. Fast delivery ( we have 100kg/color for stock)5. Reasonable prices ( we want to establish long-term cooperations with customers)6. Beautiful package (vaccum packed with desiccant, and small carton for each spool)7. OEM allowed. (we can print your desgined sticker and print logo on the cartons)We have 45 common colors always in stockFAQ:1. What is material of MINGDA desktop 3d printer filament?PLA, ABS, nylon, wooden for large desktop 3d printer supplier Mingda.2. What is the material color?The material filament is single colored. But you have more than 20 color options.3. How about the 3d printer for PLA and ABS price?In China, there is an old saying, "The cheaper, the worse". We would ensure a good quality with reasonable price. You can find a good cost performance here. Please contact us.
Colorful 1.75mm dimension filament compatible with most 3D printers and pens, , such as for MakerBot, Anet A8 A6 etc. Popular 3D printersEnvironmental friendly PLA printing material of starch that extracted from corn, cassava, etc.1kg plastic spool packaged, support automatically feeding.Printing temperature around 190°C - 220°C.Best materials for DIY 3D printing loversWe can provide 45 common colors for choice, we can also accept buyers OEM customized colors, just provide a sample or pantone No. We can make for you.WHY CHOOSE US ? 1. Excellent quality ( raw materials imported and then modified)2. Smaller diameter tolerance and roundness, usually +/-0.02mm3. Wonderful colors ( our colors are more bright than others)4. Fast delivery ( we have 100kg/color for stock)5. Reasonable prices ( we want to establish long-term cooperations with customers)6. Beautiful package (vaccum packed with desiccant, and small carton for each spool)7. OEM allowed. (we can print your desgined sticker and print logo on the cartons)8. We accept customized color.9. Free samples provided.(not for freight).
HP 950 printhead ,suitable for HP Officejet Pro 8100/8600/251DW/8610/8620/8630/8640/8660/8615/8625
HP 934/935 printhead,suitable for hp officejet pro 6230 6830 6815 6812 6835
Epson L100 printhead,suitable for Epson L200 L100 printer
HP 932/933 printhead,suitable for hp officejet 6100 6600 6700 7110 7610
