Rated voltage: 127V
Product weight: about 90kg
Explosion-proof type: mine explosion-proof and intrinsic safety type
Ethernet Gigabit optical signal interface:
1. Number of interfaces: can be customized according to requirements, up to 4
2. Transmission mode: full-duplex TCP / IP transmission protocol
3. Transmission rate: 1000 Mbps
4. Optical transmit power: -10 �¯�½? 0dBm
5. Optical receiving sensitivity: -20dBm
6. Maximum transmission distance: the module can be configured according to requirements, and the maximum transmission distance can reach 50KM
Ethernet 100M optical signal interface performance:
1. Number of interfaces: can be customized according to requirements, up to 16;
2. Transmission mode: full-duplex / IP optical signal transmission;
3. Interface type: SC
4. Transmission rate: 100Mbps
Rated voltage: 127V
Product weight: about 90kg
Explosion-proof type: mine explosion-proof and intrinsic safety type
Ethernet Gigabit optical signal interface:
1. Number of interfaces: can be customized according to requirements, up to 4
2. Transmission mode: full-duplex / IP transmission protocol
3. Transmission rate: 1000 Mbps
4. Optical transmit power: -10 0dBm
5. Optical receiving sensitivity: -20dBm
6. Maximum transmission distance: the module can be configured according to requirements, and the maximum transmission distance can reach 50KM
Ethernet 100M optical signal interface performance:
1. Number of interfaces: can be customized according to requirements, up to 16;
2. Transmission mode: full-duplex TCP / IP optical signal transmission;
3. Interface type: SC
4. Transmission rate: 100Mbps
The Dual Sim card Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.
High-performance industrial-grade cellular router adopts 32-bit processor, developed based on Linux system, supports GSM/2G/3G/4G/GPRS/EDGE/WCDMA/HSPA+/LTE network, provides high-speed wireless network bandwidth for the device through wireless connection, and has automatic detection of network disconnection, automatic restart of dial-up failure, and scheduled restart to ensure network Stable connection.
Android 4K network advertising digital signage media player Dual Band WiFi, Gigabit LAN used as signage player too
Highlight:
*Rockchips RK3288 Quad core
*GPU: Mali-T764 3D GPU (OpenGL ES 1.1/2.0 /3.0,and OpenCL 1.1)
*Android 7.1 OS
*2G RAM,8G/16G ROM high capacity memory
*With WIFI 802.1b/g/n AC Wireless to get rid of the wire bond
*Connectors: HD, AV out,Optical,RJ45,MicroSD card slot, USB hostx2
*Build in Blue tooth
*Support the latest HTML5,Flash11, etc.
*Support external 3G USB Dongle
*There are more than 600,000 Google Play apps and games for a great experience
*Extension ports support 2.4GHz wireless mouse, wireless keyboard with touchpad, etc, while a micro-SD slot lets you add more storage memory up to 32GB
12206 Computer Hardware Peripherals Suppliers
Short on time? Let Computer Hardware Peripherals sellers contact you.
4G Industrial Router R10
Prove high speed wireless data access internet,support 1LAN,WIFI,and RS485 or RS232 serial port.suitable for IIOT applications.
The R10 is an industrial 4G LTE/3G cellular routers and IoT gateways, featuring Ethernet/wireless/Wi-Fi connectivity, VPN security, high reliability, it supports RS232/RS485 to 4G Lte data transmission and WIFI 802.11 b/g/n. It is certified on major carriers networks, ideal for smart grid, industrial automation, remote monitoring, transportation and IoT/M2M applications.
4G Industrial router R10 is an industrial IoT high-speed router, compatible with 4G/3.5G/3G/2.5G network, flagship configuration, VPN link, industrial protection, wide temperature, wide voltage design, easy to set up high speed, stable The wireless transmission network uses the public LTE network to provide users with wireless long-distance data transmission.
4G Industrial Router (2SIMCards 3LAN 1WAN 1 RS485 1RS232 4AIN 2DIN 2DO)
This router is an industrial IoT high-speed router, compatible with 4G/3.5G/3G/2.5G network, flagship�configuration, VPN link, industrial protection, wide temperature, wide voltage design, easy to set up high speed, stable, The wireless transmission network uses the public LTE network to provide users with wireless long-distance data transmission.
The 4G router adopts high-performance industrial-grade 32-bit communication processor and industrial-grade wireless module, with embedded real-time operating system as software support platform, and provides one RS232 or RS485, 3 LAN, 1 WAN and WIFI interface, which can be connected at the same time. Serial devices, Ethernet devices, and WIFI devices implement transparent data transmission and routing.
1.Support hundreds of 3G/4G wireless modules, plug and play;
2.Intelligent anti-drop line, support online detection, online maintenance, automatic redial of dropped calls, ensuring that the device is always online;
3.Cloud remote background management, ad push, remote upgrade and remote configuration;
4.Local network PHP browsing and remote synchronization of local storage content;
5.Support serial port TCP/UDP transparent data transmission or AT command transmission;
6.SMS control route online and offline, short-term notification of routing status;
7.Support VPN security tunneling, including PPTP, L2TP;
8.Complete and robust router function, support multiple Internet access methods: automatic allocation, specified IP, PPPoE;
9.Support ARP, DDNS, DHCP, DNS , HTTP,HTTPS, ICMP, PPP, PPPoE, SMTP, SNTP, SSL,TCP/IP, Telnet, UDP protocols;
10.Support serial port local TFTP, web software upgrade.
APPLICATIONS:
Techwin Industrial POE (Power over Ethernet) SPD (Surge Protection Device) is specially designed for Ethernet switches. The POE switch will not be damaged by lightning overvoltage, induced overvoltage, and electrostatic discharge.
CAT5e and CAT5 compatible
IEEE 802.3afï¼?803.1at
10/100 Base-T Ethernet protection
LAN, FDDI, CDDI, ATM,WLAN
PDH, SDH, SPDH
Industrial control
Industrial POE, With High reliability and high stability
Surge protection for power supply system, SPD for low-voltage installations and device.CCTV system.
Cuckoo-HT2 is a water-, dust-, and shock-resistant LTE 4G trunking handset base on Android system with 3.5inch HD touchscreen. It provides professional voice dispatching, trunking dispatching and video dispatching in public security, energy, and transportation through public or enterprise network.
Knight-V10 serves as a wireless gateway router for LTE-based high-speed data services. It enables terminals to access the LTE network through a network port or Wi-Fi to supply LTE private network signals via wired and wireless routers. It can be deployed indoor and outdoor, and is widely used in fixed sites or vehicle-mounted single stations for data/voice collection and wireless HD video surveillance.
Product FeaturesVehicle-mount CPE
Broadband wireless router based on the TD-LTE technology
Provides high-speed data service
Actual data transmission rate of 16Mbit/s in downlink, 30Mbit/s in uplink
Supports multiple frequency ranges: 1.8G, 1.4G, 800M, 400M
Supports WiFi 802.11 b/g/n and 64QAM in Uplink
Support remote upgrade and management
Able to operate at temperatures below -40C.
Embedded DHCP Server, DNS Client and NAT functions: enable high speed routing
A variety of security encryptions
Simple to install, maintain and operate
Fully ruggedized IP65 design
Patron-P10 is designed for quick maneuver applications and supports multiple radio systems, features high capacity and performance at low power consumption. As a plug-and-play solution, it takes only 10minutes to power up and will provide 4G LTE Private Mobile network to first-responder, emergency services, tactical deployment, mining, and shipping.
Product Highlights
Emergency Combat Command System
Fast Deployment
Patron-A10 is Single box solution integrated LTE Core Network, Dispatching Sever, Base Station and Battery for fast deployment within 10minutes during an emergency.
â?¢Non-Line-of-Sight Capabilities
The brute computational horsepower, multi-core processors and Digital Signal Processors (DSPs) make Patron-P10 support Non-Line-of-Sight(NLOS) wireless connectivity.
â?¢High Mobility
Patron-P10 is a portable airdrop box design. So it supports many transports, such as placed it in vehicle, rolling on road or human carrying when the roads are muddy and even destroyed.
The draw-bar mounted to the bottom of the boxes enable the rapid development system to be dragged by a person as a whole.
â?¢High Integrity
Patron-P10 is a highly integrated system with LTE Core Network, Base Station and Dispatching Sever for supplying a complete LTE wireless private network and multimedia dispatching service network.
â?¢Large Battery Capacity
Patron-P10 can operate without supply mains with built-in battery for more than 4hours.
Knight-M2 is industrial gateway and routing device offering real time sensor data collection and wireless HD video surveillance to the headquarter by long range connecting over the LTE base stations. It features a light weight, small size and body worn product design for quick deployment and easy to carry. In addition to LTE access, this industrial-grade CPE also integrates Wi-Fi and LAN interfaces to enable users to access the lte private networks for data sharing to help the relief team operate more quickly.
Product Highlights
â?¢2X2 MIMO Radio
Knight-M2 is a 2X2 MIMO radio for individual-solider terminal collects audio and video information throught an external helmet camera and intercom headset in real time.
â?¢Ratio Configuration
Supports multiple uplink to downlink ratio configurations, including 3:1 for streaming dataintensive uplink services such as data collection, voice and video transmission.4G LTE Gateway
â?¢Wide Frequency Range
The CPE Knight-M2 operates in multi broadband frequency 400Mhz, 600Mhz, 1.4Ghz and 1.8Ghz.
Key Features
â?¢ Support a variety of services such as voice, video and GPS or Beidou positioning
â?¢ It is wearable design for use in portable and embedded applications where have high requirement of size and weight.
â?¢ Large capacity lithium battery for long time continuously working
â?¢ Equiped with HD action camera for hd video stream
â?¢ Easy maintenance: web based user-friendly interface for operation and maintenance
WAN
RF Capability
LTE Chipset Marvell 1802 cat4
LTE Channel Bandwidth 1.4/3/5/10/15/20 MHz
Modulation
Downlink QPSK/16-QAM/64-QAM
Uplink QPSK/16-QAM
LTE Authentication EPS-AKA
Adaptive Modulation and Coding Supported
MIMO support MIMO 2x2
Idle Mode Supported
Sleep Mode Supported
Idle Mode Signaling Reduction (ISR) Supported
Power Level
TDD-LTE Power Class 3ï¼?23 +/-3dBmï¼?
FDD LTE Power Class 3ï¼?23 +/-3dBmï¼?
TD-SCDMA Power Class 2ï¼?24 +1/-5dBmï¼?
UMTS Power Class 3ï¼?23 +/-2dBmï¼?
EDGE Power Class E2ï¼?GSM850/900:33dBm;DCS/PCS:30dBmï¼?
GPRS Power Class E2ï¼?GSM850/900:27dBm;DCS/PCS:26dBmï¼?
Sensitivity
TDD LTE -94 dBm(20MHZ)
FDD LTE -93 dBm(20MHZ)
TD-SCDMA -108 dBm
UMTS -106 dBm
EDGE GSM850/900:-98dBm;DCS/PCS:-98dBm
GPRS GSM850/900:-101dBm;DCS/PCS:-99dBm
Data Rate
TDD-LTE 3GPP R9 ,Category 4, DL 150Mbps UL 50Mbps
FDD-LTE 3GPP R9 ,Category 4, DL 150Mbps UL 50Mbps
TD-SCDMA 3GPP R7 DL 2.8Mbps UL 2.2Mbps
UMTS 3GPP R7 DL 21.6Mbps UL 5.76Mbps
EDGE/GPRS
EGPRS Class12 DL 237kbps UL 118Kbps
GPRS Class12 DL 85.6kbps UL 42.8kbps
LAN
WIFI info
WLAN Mode: 802.11b/g/n
Frequency Band: 2.4GHz
WLAN Channel supported:1-13
Antenna Type: Internal
Supported Security: WEP64 WEP128 WPA-PSK WPA2-PSK
WIFI MIMO: 1x1
Data Rate
WIFI IEEE 802.11b 11/5.5 Mbps
WIFI IEEE 802.11g 54/48/36/24/18/12/9/6 Mbps
WIFI IEEE 802.11n 72.2/65/58.5/52/39/26/19.5/13/6.5 Mbpsï¼?
System
2G/3G/4G setup
Network Selection:
Manual, Auto
Setup by user
Interoperability: TDD-LTE & TD-SCDMAï¼?TD-SCDMA & GSM, TDD-LTE & UMTS, FDD-LTE & TD-SCDMA, FDD-LTE $ UMTS, UMTS & GSM
SMS:
SMS over SGs Func at LTE
SMS's receiving and reading
APN setup: APN setup and revise
PIN Func: PIN:Save, revise, lock,unlock
DM: DM(Now support CMCC DM)
Modem Func: Connect to PC by USB
Automatically connect reconstructed: Can automatically reconnect to network after off-network in data using
WIFI setup
Protocol:
Max users 10
DHCP client / server, you can set whether to activate the DHCP service assigns IP addresses starting and ending addresses, set the gateway address;
Support client list: Displays all the DHCP server to obtain IP address of the host, including MAC address, IP address obtained
Support terminal IP address, SSID, communication channel, security type, the administrator account and password factory setting
Support SSID and channel settings: Set SSID, communication channel (frequency band WiFi settings, select the range of WiFi support of the band all the available channels), WIFI function on/off, and the SSID broadcast on/off
Provides WEP, WPA-PSK, WPA2-PSK, WAPI encryption methods, etc.
The T01 is a leading edge 3G PTT device powered by Android OS and 4000 mAh rechargeable battery. With 3G (WCDMA: 900/1900/2100) network, it supports faster speed, better voice quality and integration of existing PTT applications like Zello, REAL PTT, PocStar, etc. T01 is an irreplaceable tool for customers valuing the convenience and productivity of being able to set up individual or group calls with the push of a button and instantly communicate over the speaker of the recipient's handset.
00G data rate
Support line rates from 103.125 Gbps to 111.81 Gbps
Up to 300m based on MMF ,40km on SMF
Digital Diagnostics Monitoring Interface
Duplex LC optical receptacle
No external reference clock
Electrically hot-pluggable
Compliant with QSFP28 MSA with LC connector
Power dissipation < 3.5 W
Compliant with CE,FCC,Rohs,REACH
40G data rate with 4 CWDM lanes Mux/Demux design
Up to 11.1Gbps Data rate per wavelength
From 150m to 40km transmission on MMF/SMF
Electrically hot-pluggable
Digital Diagnostics Monitoring Interface
Compliant with QSFP+ MSA with LC connector
Case operating temperature range:0°C to 70°C
Power dissipation < 3.5 W
Compliant with CE,FCC,Rohs,REACH
Introduction
Cybervision CHD HD optical transceiver consist of optical transmitter CHDT and Optical receiver CHDR, for transmitting 3G ultra HD video, HD-SDI video, SD-SDI video or ASI digital video signal. With multi-bit rate cable equalizer at the input of CHDT, built-in distribution and amplifier in CHDR, it can output 2 channels HD-SDI.
With incomparable signal accuracy, and circuit reducing the signal jitter, CHD can deal with distorted signal well, it can provide 100m automatic equalizer for 2970Mbps signal, 140m for 1485Mbps signal, more than 250m for 270Mbps signal.
Two structure, independent wall-mounted installation and module frame intensify installation are available.
Features:
1. Conform to the standards of SMPTE424M, SMPTE259M, SMPTE292M, SMPTE297M, SMPTE310M, SMPTE305M, SMPTE344M
2. Self-adapt to 3G-SDI, HD-SDI, SD-SDI and ASI
3. With cable equalizer at the input, it can make up the loss of cable transmission
4. With circuit reducing signal jitter, it can deal with the distorted signal well.
5. Supports RS-232, RS-422, RS-485 (2/4 cable), Manchester code. data telecommunication format (optional)
6. Show working status clearly, there are LED indicators for input data bit rate, optical signal, power supply.
7. Supports SMPTE178 standardpassed the test of SDI pathology
Introduction
Cybervision CGE series 3G-SDI+ Data Optical Transceiver consists of optical transmitter CGET and optical receiver CEGR, which can realize mixture transmission for profession video and standard data interface for one channel 3GSDI, dual channels 10/100m Ethernet signal and multi-channels RS485/RS422, the SDI supports the HD signal with bit rate 3Gb/s, 1.5Gb/s, and compatible with SD-SDI or ASI video signal.
With multiple bit-rates cable equalizer at electric input of CGET, and built in distribution amplifier at CGER, it can output dual channels HD-SDI (main and standby). With incomparable accuracy, and the electro circuit which can reduce the signal jitter, the equipment can deal with distorted signal well, it can provide 100m automatic balance for 1485 Mbps, 250m for 270 Mbps.
Features:
1. Meets all video standard of SMPTE 424M, support the 3G SDI video format with bit rate of 2.97 Gb/s or 2.97/1.001 Gb/s
2. Meets all video standard of SMPE 292M, support the HDSDI video format with bit rate of 1.485 Gb/s or 1.485/1.001 Gb/s
3. Meets all video standard of SMPTE 259M, support the SD-SDI video format with bit rate of 270 Mb/s
4. Meets the interface standard of DVB-ASI (270 Mb/s) and SMPTE 305M (SDTi)
5. Passed the test of SDI pathology
6. With automatically identifying SD/HD/3G bit rate, the identifying scale: 270Mb/s ~ 2.97Gb/s
7. With automatic equalizer at SDI input port, the input of 270 Mb/s can be up to 400m, 1.485Gb/s can be up to 140m, 2.97 Gb/s can be up to 120m (the testing cable is Belden 1694A)
8. Support two channels 10/100m Ethernet interface, the two ports have switching function
9. Support 4 channels RS485 or 2 channels RS422, every channel is independent.
10. The optic signal is 3 wavelength CWDM signal, the wavelength can be customized, the transmission distance can be up to 100KM.
36 Channels HDSDI Optical Transmission Platform
Introduction
CS3U module-based HD-SDI optical transceiver consists of CS3U-T transmitting module and CS3U-R receiving module each 3U module-based chassis can assemble two power supply boards12 optical transmitting boards or receiving boards one LCD touch screen board for monitoring the status
Adopted Time Division Multiplexing technology, each transmitting and receiving module can transmit 3 channels HD-SDIby built in CWDM, the whole equipment can transmit up to 36 channels HD-SDI with via 1 fiber the color LCD touch screen on front can display and warn all kind of status of the equipment. Unique module-based design makes all input/output BNC and fiber interface for connecting on the rear panel. No need remove the cable and power off the equipment when you plug In and remove cards, it is convenience for operation and fully meets the usage pattern of broadcasting industry which plug in card via front and connect cable via rear panel, in order to monitor the signal, the front panel has monitor interface, all card support hot-swap.
1 Transmitting up to 36 channels HD-SDI via Single fiber 12 wavelength from transmitting end to receiving end
2 Be able to realize symmetric or asymmetric transmitting in two-way up to total 36 channels HD-SDI via Single fiber 12 wavelength from transmitting end to receiving end
3) LCD touch screen can show the follow information:
1 Basic information such SN etc.
2 Working voltage of 2 power supply, working temperature of the whole unit, optical interface type
3 the wavelength of 12 optical transmitting/receiving boards , transmitting optical power, receiving optical power, lasers working temperature
4 the type of each board: transmitting card or receiving card
5 BNC characters: input or output; mode format: HD-SDI or SD-SDI
Features of Single Transmitting /Receiving card:
1. 10G fiber data channel, adopted Time Division Multiplexing technology, it can transmit 3 channels HD-SDI via single fiber single wavelength
2. By WDM, the whole unit can transmit up to 36 channels HD-SDI via single core fiber
3. With high speed FIFO synchronization of SDI, it makes the SDI TS more stable and jitter smaller
4. Self-adapt to HD-SDI, SD-SDI and ASI
5. Meets the standard of SMPTE178passed the testing of pathology signal
6. Each board has LED indicator on front panel to show its status, there is color touch screen LCD information collection board for the whole equipment, it can show all optical power, wavelength, temperature, and other information
7. Power supply provide hot backup, support hot-swap
12206 Computer Hardware Peripherals Suppliers
Short on time? Let Computer Hardware Peripherals sellers contact you.
