1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection; 3. Management and configuration via LAN connection configuration software for easy operation and maintenance; 4. Integrated 10/100M adaptive Ethernet module, supports Modbus TCP protocol; 5. 16 digital output or relay output, supports 10Hz~300KHz high speed pulse output; 6. High sampling frequency and special filtering strategy to ensure reliability; 7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules; 8. Supports register mapping function and extend I/O inquiry strategy; 9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost; 10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
Wide Compatibility: Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Ubiquiti UF-RJ45-10G, Netgear AXM765, D-Link DEM-440XT, TP-Link, Mikrotik, Supermicro, Linksys, and Other Open Switches. 10G SFP+ to RJ45 Copper module for CAT6A/7/8 cable, copper RJ-45 connector. Supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.) Easy to use: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports. High Quality: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch. After-sales Service: 30-day free return, 3-year warranty, lifetime technology support. QSFPTEK is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to contact us.
1x Multimode Dual LC fiber Optical Port: 1.25Gbps, 850nm wavelength, support Gigabit Ethernet; 1x RJ45 Port: 10M/100M/1000M, supports Full/Half Duplex auto-negotiation and MDI/MDIX auto-crossover. Equiped with high-quality chip to ensure stability and Ultra-low time-delay data transmission. Complies with IEEE 802.3/802.3u/802.3z/802.3ab, 10/100/1000Base-TX/FX. Supports jumbo frame size 9K byte. Modulization configuration design, support hot-swappable, plug and play. And LED indicators for TX, FX LINK/ACT, POWER, FDX can dynamic feedback link connection state and fault detection to easily monitor network status. Only 93mm x 72mm x 27mm(3.7"x 2.8"x 1.1") in measurement. Its compact modular design facilitates deployment in a narrow desktop location to save space. Product List: 1x Gigabit Ethernet Media Converter, 1x 1000Base-SX SFP module, 1x DC Power Adapter, 1x Product Manual. 30-day Money-Back guarantee, lifetime tech support.
Specification Item:2 gang 13A Switch wall socket with USB charger Code Number:P23U1R1 Rated current:13A Voltage:AC 220-250V IP grade:IP20 Cover plate:PC Frame:PC Base:PA66+25% glass fiber On/Off operation:Switch: 15000 times/ Socket: 15000 times Fixing screw:M3.5*P0.6*24mm Mounting box depth:35mm Standard:BS546, BS 1363-2 Packing Details: Inner Box (1PC):148*91*34mm Box (10PCS):180*155*97mm Carton (100PCS):550*375*175SSmm USB Function Description: Input:220-240 V 50/60 Hz; Output:DC 5V Max 2100mA; Environment Interior Temperature:-5â??-39â??; Charge:Iphones, Ipad and other MP3, Mobile Phones, PDAs & Digital Cameras etc. Advantage This product adopts innovative shape design, beautiful radian, elegant structure, flexible modular structure, easy installation and disassembly, rich combination of face frames, complete product function range. How To Use Products 1. The total power of the connected electrical appliances shall not exceed the rated power. 2. It is strictly forbidden to tie wires in order to avoid abnormal overheating. 3. Please do not use in humid environment. 4. Do not use in case of damaged sockets and wires. 5. Do not disassemble without authorization. 6. Do not use wet hand to plug in and pull out plugs. 7. Do not place boards where children can touch them.
TX-80W 8 channel Range: 50-100m Output power: 10W each channel,total 80W X-80W is a high power jammer, it has 8 frequency bands and each band power 10W, the output 80W in total can effectively get rid of the signal threat in seconds by jamming. The Jamming range is 10-30 meters to meet your needs as much as possible. And the bands can include almost signals of 2G/3G/4G/Wifi/GPS, you can option freely. Need more? Contact us for customizing. TXtelsig is the leading manufacturer to design and produce signal jamming and wireless coverage product with professional and experienced research and development teams. We have the strength to provide you with the most cost-effective products and plan. Product Feature 1. Ultra-wideband jamming coverage and efficient frequency division ensures best signal interference of different frequency and cut off signal link in seconds 2. Each channel separate to deal with specific frequency signal as customized 3. Jamming range 10-30 meters, to get rid of signal threat at first time 4. Durable and heat-dissipation aluminum alloy shell; Of military standard being anti throw and pressure-resistant 5. One switch control, convenient and simple, one-button on/off 6. With cooling fan and multiple cooling holes form a good cooling system 7. Handheld grip design easy to carry on. Application: 1. Conference room, Confidential office, negotiation room 2. Mobile vehicles, on-site protection of important figures in the political and business circles 3. Party and government organs, temporary meeting rooms for all kinds of small meetings of enterprises 4. Personal or commercial special needs
Built -in Battery: 1 hour Drone Jamming Frequency: 3 channels for 2.4G 5.8G GPSL1 Range: 1000-1500 meter Output Power: 60W VSWR and Temperature Protection
---TX-E10 Phone WiFi Signal Jammer ---This jammer has a strong jamming signal ability, to block 2G 3G 4G 5G phone signal as need and also WiFi signal. Even MOQ 1pcs can have customized frequency for all 10 channels. Jamming range radius : 10-30 meter ---Product Feature 1.10 chancel design, 2 watts each band, total 20Watts (still depends on given area signal environment ) 2. High gain 5dBi omni directional antenna, 360 degree shield signal no blind corner 3. Safe Stable use with regulated power supply 4. Complete cooling system with the ultra thick heatsink, large 6*6cm fans 5. Independent module design with signal source each channel; for easy maintainance, if have any damaged frequency band replace with new PCB directly in 2 year warranty ---Application Places Meeting room, conference room, museum, galleries, theatres, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security. For some locations of special purpose such as hospitals, gas stations and more, please do field test first to make sure no interference happened to the normal operation of their equipment and instrument ---Packing List 1pcs Jammer, 10pcs Antennas, 1pcs AC adapter
It adopts RF jamming 9 channels and can shield phone wifi signal in large area in 10-20 meter radius (depends on real using environment ). In that area, the phone can not send or receive messages or calls, and Wifi network can not be used anymore.
Specification Jamming Range 1000-1500 meter Package Content 1pcs*Signal Jammer 1pcs*External Battery lasts 1.5 Hour 1pcs*AC Adapter Jamming Frequency RC2.4GHz: 2400-2500MHz 43dbm/20W; RC5.8GHz: 5725-5850MHz 43dbm/20W; GPSL1 and Glonass L1:1560-1620MHz 43dbm/20W; (Customized) This is a latest drone signal jammer for shield 100% 360 degree drone such as DJI Phantom 4 Phantom 3 Professional Advanced, Standard series, Inspire Series, etc. Function: The jammer can block the signal between UAV and remote control, force it return,land or hover, Stop GPS navigation and data transmission.
* Gun Shape Drone Signal Jammer * Jamming Range: 1500-2000 meter * Size/Weight: 870*285*80mm/5.1kgs * 3 channels: GPSL1, WIFI2.4G, WiFi5.8G
Opticombine Industrial Ethernet Switch, 1 x 10/100/1000M Base A network switch is networking hardware that connects devices on a computer network by using packet switching to receive and forward data to the destination device. Feature 1. High quality optoelectronic modules provide good optical and electrical characteristics. 2. Ensures reliable data transmission and long working life. 3. Supports full duplex or half duplex mode with automatic negotiation capability. 4. Automatic cross recognition of network port support. 5. In line with carrier level operation standard, the average fault free operation is more than 50 thousand hours. 6. Working power supply: DC 10-52V provides anti connection protection. 7. Uses SC optical fiber interface (optional ST, FC, SFP interface) 8. Lightning surge protection (power):5000A (8/20 s)
Smart Home Gateway Convexa-S is a unique smart home gateway with beamforming Wi-Fi, Zigbee* and Bluetooth* that can connect all your IoT devices together. More wireless protocols will be added. 400Mbps (2.4G) + 867Mbps (5G) Combined Wi-Fi Speed Built-in Bluetooth or Zigbee Module * 3 x Gigabit Ports Supports MU-MIMO
Keep Snoopers Off Your Wi-Fi Network Keep your Internet connection private with multiple VPN protocols support. GL.iNet Slate provides the best encryption and authentication with OpenVPN. Meanwhile, WireGuard�® gives the privacy-minded users a fast and simple VPN that utilizes state-of-the-art cryptography. Max. 300Mbps (2.4G) + 433Mbps (5G) WiFi Speed 128GB Max MicroSD 3 x Gigabit Ports
4G LTE Smart Router Spitz is a 3G/4G dual-band wireless router, widely used for smart home and IoT area. Running OpenWRT OS, you can compile your own firmware to fit for different application scenarios. It has built-in mini PCIe 3G/4G module to support different operators and can be used all over the world. 300Mbps (2.4G) + 433Mbps (5G) Combined Wi-Fi Speed 128GB MicroSD Capacity PCIe 4G LTE Modem Built-in Bluetooth or Zigbee Module
4G LTE Industrial Wireless Gateway Collie is a compact and cost-effective industrial 4G router. Equipped with the external full-band 4G antennas, the aluminum alloy shell and the hardware watchdog, the mobile router ensures stable LTE connectivity in harsh and hazardous environments. Collie can also serve as a smart industrial Internet gateway with the functions of RS485 interface and the optional IoT module for a range of IoT applications including vending machines, charging piles, smart agriculture, metering, and more. Max.150 Mbps Wi-Fi Speed Built-in 4G Module Built-in Watchdog Built-in Bluetooth or Zigbee Module (Optional)
Industrial 4G IoT Gateway Amarok is a powerful and stable operation, a cost-effective product designed to meet the needs of industrial users through 4G/3G signal wireless internet access. Because of its open source platform-based features, it can also be used as an integrated platform for extension such as developers, makers, and IoT integration development. 300Mbps (2.4G) + 867Mbps (5G) Combined Wi-Fi Speed 5 x Gigabit Ports PCIe 4G LTE Modem 128GB Max MicroSD Supports MU-MIMO
Mini Wireless Router Our GL-MT300N-V2 is upgraded to new chip MT7628NN, and the RAM is enhanced from 64MB to 128MB. Also, the MTK driver helps to improve Wi-Fi connections, coupled with faster OpenVPN encryption. 4 GPIOs are included for DIY fun. From this, GL-MT300N-V2 is your best pal for travel. Max. 300Mbps Wi-Fi Speed 1 x 2.0 USB Port 1 x Switch Button 2 x Ethernet Ports
Yingfa Mns Fastskin Jammer Specialty For Competition
With HPC008, You will get: High accuracy customer-flow data Detailed data report chart Real-time customer flow on every floor Any change of the customer-flow data and average data How many people in shop now Customer-flow density at different location Average stay time of visitor The rate of purchase Data can be exported in different form for analyzing and integrating Specification Item Specifications Size 18.9(L)*14.5(W)*5.8(H)CM Processor ARM cortex A7>1GHzï¼?28nmï¼? Sensor Video Input cmos /Simplex high definition Video Compression standard H.264, YUY2 Video Definition Adjustable Image Processing Exposure Control/ Gain Control/ White Balance/ Gamma Correction Video Frame rate 30fps Measuring Range 2m Installation Height 2.5-5.0m Port protocol Network Interface RJ45, 10M/100M, Adaptive to Ethernet port Protocol Standard 802.11a or 802.11b/g Maintenance Interface Micro USB SD card Built-in, 8 32G Electronic Clock Built-in, RTC module Remote Upgrade Upgrade By The Website Physical Parameter Size 120mm*120mm*48mm Weight 200g Adapter +5V/2A Power â?¤10W/ POE optional Hardware Monitoring Hardware Watchdog Temperature -20+65 Model Model Installation Height HPC008-2.1 2.6--2.7 M HPC008-2.5 2.8--3.0 M HPC008-2.8 2.9--3.2 M HPC008-3.6 3.2--3.8 M HPC008-4 3.9--4.4 M HPC008-6 4.4--5.1 M The critical height, advised to choose a large lens Remark This test results is based on persons of average 1.7M Effective width detection 2M Advantages High Accuracy Rate 95%-98% 1. It counts according to person's head, so it can solve the problem when people walking shoulder by shoulder. 2. It eliminates the invalid pass by setting a counting area. 3. Different camera for different ceiling height. Data Safety 1. Network-off protection: The data can be saved in the device for 10,000 seconds (about 3 hours), even there is no network. 2. The data can be exported in PNG, JPG, PDF form. 3. Data backup: When the IP address is changed, the data can be backed up. Data Transmission 1. The data can be transferred to server directly. 2. It can work in WiFi network. Data Report 1. Detailed valid in-out-stay data. 2. Data from different entrances in different shops can be distinguished. 3. Sales info can be inputted manually. It is convenient for shop to make the commercial solution. 4. With a API, the data can be integrated into POS/ ERP system. Power Supply Adapter or POE as your requirement.
The SIM7600G is Multi-Band LTE-FDD/LTE-TDD/HSPA+ and GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT1 up to 10Mbps data transfer. It has strong extension capability with rich interfaces including UART,USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application.The package of SIM7600G is LCC+LGA. The package (LCC part) of SIM7600G is compatible with SIM7600x (LTE CAT1 Variants module with LCC package). AT commands of SIM7600G are mostly compatible with SIM7500/SIM7600 Series modules. This also minmize the investments of customers, and enables a short time-to-market. It is designed for applications that need high throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for many applications.
